I have theader mode turned on a lot and I keep seeing this little light bulb icon with a slash down the middle. Is there any way to remove it, it mess up my whole watch face.
Related
Is there some registryhack or anything else, to change the color or frequenz of the LEDs?
e.g. I would like to have a red notification instead of the damned amber one (which looks hardly like the green one, in some situations)
I also would prefer a higher blink rate when notificated and a lesser one, for normal status.
I hate blinklights just for annoying net connect or bt connect "notification".
please, doese someone knows some way?
You can change ANY notification in the Sounds and notifications settings, or through a program such as PocketZenPhone.
Search the forums and you will find what you need!!
Re the lights themselves, you won't be able to change them without changing the diode itself. Though perhaps there's a setting that changes which one (ie green or amber) is used for different styles of notification. Given the options between those two, however, I don't see why you'd want to change them.
Ant
sure you can say: notificate me via light/sound/vibra - but it is the color I want to change (standart green. amber, red are ok, if I just could choose them as I like)
i want to change the "organge/amber" notification, cuz I find it hard to see the differenz between the green one, especially in daylight.
if there would be some setting to change the standart notification to red, this would be pretty pretty usefull.
even the frequenzy would help me, to realize faster whats going on.
AND I didn't found a way to cancel blinking e.g. for BT on oder Netconnect.
in night, it is a pain in the neck, and I do have to find something i can cover the lights with, if I just want a dark night .
there muste be a possible of changing it, it is just a damned OS and so its a software thing.
Someone like Buzz is probably better than most to advise re changing which LED is used and the frequency of blinking.
There is an app that allows you to turn off LEDs during the night. I used to have it on my PC but never installed it on the phone cos I turn my phone off at night. The posts linking to it were on X-D so a quick search should find it.
Cheers
Ant
maybe buzz knows some way?
I hate resurrecting old threads, but has anyone yet discovered where the LED blink rate is controlled? Is it something that can be modified? It simply blinks too much, in my opinion.
Thanks in advance.
Turn of the green flashing light at the top of the Wizard, I leave it at the side of my bed at night as I use it as an alarm clock and the tiny green flashing light is bright enought to light up the whole flickin room. I have taken to lying it face down on a book, but would be interested in knowing if it is possible to disable the green LED.
Cheers
Steve
Electric tape? Seriously, I think I read that this is no hack to turn off the lights. I agree that they're quite annoying.
Turn on bluetooth and you get a cool blue flashing light too and that one is even brighter and really lights up the room. Yep, cover it up. Lay a book or magazine over that end of your phone. Or get a case so it covers up the front.
I'll wake up in the middle of the night and see my side of the room glowing blue. Its from my bluetooth headset (plantronics) letting me know its charged... sheesh...
wurzel555 said:
Turn of the green flashing light at the top of the Wizard, I leave it at the side of my bed at night as I use it as an alarm clock and the tiny green flashing light is bright enought to light up the whole flickin room. I have taken to lying it face down on a book, but would be interested in knowing if it is possible to disable the green LED.
Cheers
Steve
Click to expand...
Click to collapse
I leave mine face down.
--M
wurzel555 said:
Turn of the green flashing light at the top of the Wizard, I leave it at the side of my bed at night as I use it as an alarm clock and the tiny green flashing light is bright enought to light up the whole flickin room. I have taken to lying it face down on a book, but would be interested in knowing if it is possible to disable the green LED.
Cheers
Steve
Click to expand...
Click to collapse
There has to be a reg hack that can do this cus, when you go to Sounds and then you click on any of them you have a option to have 'flash light for ....'
So there must be a setting that you can turn it off for good!!1 I will have a look but i am at work right now so not much time!
Alright, so I have a nexus 4. I don't know how long this issue has been around, since only now am I noticing it. After having a fairly high contrast image on the screen for a few seconds, such as the facebook status bar, if I go to another app or the homescreen, sometimes I can see a faint outline of the image. It can occasionally get really bad, especially after the screen has been off for a while. Like I was watching a video on firefox, so I switched to landscape mode. The video couldn't go full screen and I had two grey bars on the side. I was shocked to clearly see the firefox navbar burnt into my screen. Thankfully all of it cleared up, but I'm wondering if anyone else has an image persistence issue. I'll try and get a picture once I can find a camera with decent exposure. Also, it seems that the sides of the screen, especially the right side, are brighter than the rest of the screen, also after the screen has been off for a while. Don't know if the two issues are correlated or not, but I think they are. I was using facebook and my phone crashed with a white screen with lines going through it, awful image persistence, and terrible bleed through. Held down the power button and there was the bleed through and image persistence, along with screen flicker that makes a CRT look entirely static. I'm wondering, what the hell is up with my phone? I haven't really done anything wrong to it, this just kind of happened.
Got a photo. Couldn't find the cable to connect my camera to my computer, so I had to take a photo of a photo, and for that it turned out alright. Don't know how well it will turn out on different displays, but trust me it's there. This is the icon in the top right corner of the facebook application. When I swipe from the right to the left to see who's available for chat, I can see an outline of the icon that was there before.
I've noticed the persistence too at times, like a ghost image - CRT with a static image on too long, so if there was any doubt, it's not just you
I've had the same problem several times before. I just had it again, quite prominent! It stays for a few seconds, and then fades off to nothing.....Quite worried? :S
Hey everyone I have a problem with my screen color. I was on a voice call with IMO and apparently the app doesn't deactivate the screen when the phone is to your ear and it seems as if my ear was just doing a whole mess up stuff because it even put the phone into airplane mode which ended the call. When I looked at the phone to see what was wrong I notice the colors where all messed up as if it was inverted. All whites are black and everything looks screwed up. I have know idea what happened or what was pressed. I included a screen shot. Any help would be appreciated.
Edit:
Damn just jump on my computer and the screenshot I attached is different from what Im seeing on the phone.
Here is what I am seeing.
Edit: Fixed it thank god! It was under accessible -->display and color inversion was turned on, just had to turn that off and it was back to normal.
Tap invert color icon on status bar
Hi there I get a blue screen the screen shows the time and date nothing else and it doesn't use the bottom 25% of the screen. Its very weird but it seems like a feature I'm enabling by accident as when I get a call it shows the pick up and hang up options. But I'm unable to get out of that mode.
I have attached a screenshot of what happens. And also screenshot of my rom ect..
Kendal21 said:
Hi there I get a blue screen the screen shows the time and date nothing else and it doesn't use the bottom 25% of the screen. Its very weird but it seems like a feature I'm enabling by accident as when I get a call it shows the pick up and hang up options. But I'm unable to get out of that mode.
I have attached a screenshot of what happens. And also screenshot of my rom ect..
Click to expand...
Click to collapse
It is a feature you're enabling by accident. Do you have a magnet anywhere near??
That is the transparent cover display mode, you know those cases with covers that have a small transparent window on them? They have a magnet, and there is a sensor inside of the phone. When you open the lid the screen turns on, and when you close it it locks and goes to that blue screen for some time.
I think you can disable that on the Display settings, not sure.