Hi guys
(SM-N9005)
So yesterday I had liquid smooth rom installed for the past month or so (I have been trying a variety of roms for the last year or so) and I was getting some bugs occuring and decided to put a new rom on.
I booted into recovery, did the normal backup, factory restore, clear cache and dalvik, installed the rom and restarted my phone. It then went into a boot loop.
At this point I assumed it was no biggy, so I just went back to recovery and chose to restore with the backup... except it wouldnt. it couldnt recognise the file it had just made.
So I then coppied some previous backups to the external micro sd, stuck the micro sd card in, booted in recovery and tried to recover with them... couldnt recognise them.
I also noticed that when trying to reboot, it came up saying that I didn't have root access... even though I certainly have for the past year.
I tried flashing an updated version of superuser as that was the suggested method on some forum - didnt help the situation.
Now when my phone boot loops, it goes straight to android system recovery <3e> and nolonger have access to CWM
No idea what to do, and my uni work greatly depends on me having access to my phone :/
Any help would be greatly appreciated
my baseband version is LRX21V.N9005XXUGBOB6
i got some problem ... it freak me oute but i founnd how to back my stock firmware backk
you shoud find your firmware ... it can be downloaded from sammobile.
and flash tar.md5 file via ONDIN.
good luck!
Related
I have my nook rooted and all of that and for some reason I decided to wipe the thing clean in CWM recovery and now it won't boot to anything unless I boot from SD. I've tried booting into a rom from SD and installing CWM recovery again through rom manager and it says that is has flashed successfully but when I tell it to restart it goes back to the rom on the SD of course, so I tried taking the SD out and holding down the N and booting into recovery and I get nothing no loading screen no nothing, am I not getting CWM installed? Is there a zip I can flash from CWM on SD to flash it?
EDIT!!!!! If i had remembered to format the right things then I wouldn't have had an issue.
If you are having the problem described above remember to format BOOT, System, and Data. And then flash your rom.
See post#4 here: http://forum.xda-developers.com/showthread.php?t=1205047
Thank you I don't know what I was thinking, if I had just formated the right things it would have worked just fine, I am a tard sometimes.
Hi,
I ve done dozens of flashing with my Sony and Samsung phones with no problem. Today i decided to flash something fresh on my acer a500 tab. I did my first mistake Please help cause im reading threads for 3 hours now and i dont know how to proceed.
Heres the story:
I was on stock ics 4.0.3 rooted. I used successfully the AfterOTA tool and flashed Bootloader ics v3.14.8 + Recovery Ra v3.1.7 That gave me the Skrilacs Recovery V8.
Then i did all the usual wipes and flashed successfully RE-FLEX XX 40.4 Rom. After the first boot i noticed that my internal storage wasnt empty. It gave me only 14gb free. There were still stuff in like photos, some music and apps remainings. I desided to wipe again and reinstall the rom. I did it a couple of times and i got the same result (internal storage was still with the same stuff).
On my last try to install the rom again it stucked on rom booting screen (bootloop). I can still get into CWM but cant find a solution.
Thanks in advance for any help..
Update: just managed to get it boot back on stock. My heart is back to its place now.
Thanks
Alright... where to begin? Lets start at what happened around yesterday. Prior to the whole weekend, I had CyanogenMod 10.1 installed on my rooted S4. Come Friday, I start to miss some of the stock Samsung features such as Air Gestures, Smart Stay, the stock Samsung camera, and all that. So, I install WanamLite (a custom rom) on my phone. It's good and all but for some reason, the Smart Stay isn't working. To fix this, I go online and start digging; I find people saying "yo, revert back to the original firmware and re-install the Rom, that should fix your LTE problem." I think to myself, "maybe this could help me too." And that's exactly what I do. I go online to SamMobile and download this ROM (http://www.sammobile.com/firmwares/?page=1&model=SGH-M919V&pcode=0#firmware). It installs with Odin and I was able to get back to the Stock Samsung firmware. I then proceed with my plan and install WanamLite; that also worked. So I'm all happy and stuff 'cause Smart Stay finally works but, shortly after fiddling with the re-stocked device, I get bored again. So, I start searching the forums for another rom to replace WanamLite (it was a good rom, but I wanted to try something else before settling down on it).
I find this ROM in the XDA-Developers S4 forum: http://forum.xda-developers.com/showthread.php?t=2303239. I try installing it; it works fine. But then, I notice that half my SD card is used up. So, I go into TWRP and click on Format Data (I'm not too sure about the name, I had CWM prior to the re-installation of Samsung stock firmware). After resetting the Data, I boot back into the phone and notice that the default layout is Easy Mode. (On the bright side, I freed 4 GB from my SD card). Easy Mode's incredibly annoying, so I wrestle with the phone for a while to change the launcher to Nova launcher, but to no avail. In the end, I decide to reflash the FoxHound ROM. I place the rom on my phone and boot into TWRP. That's where the problem comes. I selected: wipe cache, wipe delvic cache, wipe data. Then I wiped the cache and data, flashed the rom and, after that is when the phone started refusing boot up. From then on, it just displayed Samsung Galaxy S4 logo on the screen whenever I tried to start it.
What I tried to fix the issue: Re-installing the stock samsung firmware. (I think I ended up screwing up the phone even more with this. Before, I had TWRP installed but I couldn't boot into it, now I don't have any custom recovery installed and I still can't boot into the phone).
I can access the Download Mode and use Odin. I cannot boot into the recovery. When I hold Volume Up + Power + Home, it just says recovery in blue above the logo, and then, the phone reboots.
So, any ideas on how to fix it?
TL;DR: Tried installing FoxHound Rom. I wiped Delvic Cache, Cache, and Data, and after flashing the rom, the phone refused to boot up; it gets stuck on the Samsung logo. Before flashing, I did Format Data. After being unable to boot into the phone, I tried to flash the Stock Samsung Firmware on my S4. Nothing worked. Any ideas on how I should proceed?
splitinferno said:
So, any ideas on how to fix it?
Click to expand...
Click to collapse
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
psycovirus said:
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
Click to expand...
Click to collapse
I've already tried flashing the Stock Samsung Firmware using Odin, it didn't work. Also, I'm having no luck with Kies; it won't connect. Any other suggestions? :/
EDIT 1: Okay, so here's the deal right now: I was able to flash TWRP using ODIN. This granted me access to my recovery, somehow. So right now, I have the FoxHound_GearEngine0.2 ROM installation files on my SD card and I am booted into the recovery. What should I do? Should I try flashing again? For now, I'll just wait for a response.
EDIT 2: Out of curiosity and impatience, I tried flashing FoxHound but got an error:
Updating Partition Details
E: unable to mount data
E: unable to mount internal storage
TWRP v. 2.5.0.3
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
maazali said:
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
Click to expand...
Click to collapse
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
UNBRICKED
splitinferno said:
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
Click to expand...
Click to collapse
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Hahah nice job
Sent from my GT-I9505 using xda premium
splitinferno said:
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Click to expand...
Click to collapse
Next time don't wipe data in custom recovery because it will corrupt your data which would most probably end with not booting past the Samsung logo, if you want to wipe in a custom recovery for now you have to manually wipe system, cache and dalvik cache located in mounts in cwm recovery (not sure where to find it in twrp).
You should read a little before messing with things in recovery.
Ahahah that's funny because something similar happened to me. And I was going to suggest doing a factory reset via recovery because that's how I resolved my problem, then I see you did just that! (Y)
Sent from my GT-I9500
Simply put, this is what happens when a rooting newbie discovers custom bootloaders and ROMs.
Current State:
A full stock ROM installed (no root) with the Skrillax V8 bootloader plopped on top of it. (which of course means the recovery-from-boot.p file still exists and that I don't have CWM.) The tablet will show the Acer logo then the Android logo and will give the appearance of booting. Then the icon flashes. It does this intermittently and forever.
What I want:
CM 10+ running with Skrillax and TWRP stably. I'd go with Flexreaper for next choice. Maybe I'll try to compile a KitKat version for it someday. Who knows.
How I managed to get my tablet in this crappy state:
Rooted tab a long while ago with a probably far outdated method.
Looked all over the internet later on how to unlock the bootloader and settled on the manual method in this excellent thread.
I flashed V8 and TWRP without a hitch using nvflash.
I wiped and installed Flexreaper.
I liked it but wanted a higher prize. I make a nandroid backup of it onto the external_sd and wiped and installed CM 10.1 from this thread.
This is where everything started going sour. It told me the install was invalid halfway. Disappointed, I wiped again and tried to restore my nandroid backup. It seemed to restore properly, but then Skrillax hung forever loading the kernel.
I wiped again and installed Flexreaper fresh. This time it booted. I downloaded the newest unofficial version of CM they mention on their wiki.
Booted to recovery and installed CM 10. It ran fine and I was impressed with the new OS. Then I noticed the apparent lack of Gapps.
I flashed the Gapps Jellybean package and rebooted. Skrillax hung.
Wiped everything I could fine in the TWRP menu and installed Flexreaper. Got past the primary kernel loading but the android icon would work for a bit then flash, starting all over again.
At this point I flashed several other recoveries, hoping it was my recovery. No such luck. I tried all of them included in V8.
Then finally, I downloaded full stock ICS and flashed it. I rebooted and noticed the same Android flashing thing.
Finally, I flashed V8 again, being the newbie I was, and then suddenly remembered while trying to boot to recovery that the Full install probably rewrote the recovery-from-boot.p.
And here I am.
Tl;dr version:
Went click-happy with ROMs, wiping, and recovery flashing until I was left with a stock OS that wouldn't boot with a Skrillax bootloader but no recovery.
The good news is, I still have cpuid+sbk, it still boots to APX (no idea how I didn't screw that up too.), and I have a nandroid backup on my external_sd which is probably untouched, since I was careful to not wipe it in TWRP.
Please help me fix this. I don't want an excuse to waste money on a flashy new Nexus or Asus Transformer tablet, I already have too many for my wallet's comfort.
I quess you renamed stock rom to update.zip and than flashed it? If you havent do it, put it on sd card and pres power+vol down (if nuttin happens than vol up). That shld trigger flashing proces
poslato sa elmag radija
uglyjohny said:
I quess you renamed stock rom to update.zip and than flashed it? If you havent do it, put it on sd card and pres power+vol down (if nuttin happens than vol up). That shld trigger flashing proces
poslato sa elmag radija
Click to expand...
Click to collapse
I don't have access to a micro sd card reader if the file must be placed on the micro SD card. I already have flashed the stock rom supposedly via TWRP, so I shouldn't have to flash it again, I wouldn't think. If I do, I guess I'll have to get a reader.
Yes. Micro sd. Rename it. You have guodes gere on xda. Im hoping it will help you.
poslato sa elmag radija
It didn't work. Still in same state as before.
I also have access to fastboot if that would help.
m27frogy said:
Simply put, this is what happens when a rooting newbie discovers custom bootloaders and ROMs.
Current State:
A full stock ROM installed (no root) with the Skrillax V8 bootloader plopped on top of it. (which of course means the recovery-from-boot.p file still exists and that I don't have CWM.) The tablet will show the Acer logo then the Android logo and will give the appearance of booting. Then the icon flashes. It does this intermittently and forever.
What I want:
CM 10+ running with Skrillax and TWRP stably. I'd go with Flexreaper for next choice. Maybe I'll try to compile a KitKat version for it someday. Who knows.
How I managed to get my tablet in this crappy state:
Rooted tab a long while ago with a probably far outdated method.
Looked all over the internet later on how to unlock the bootloader and settled on the manual method in this excellent thread.
I flashed V8 and TWRP without a hitch using nvflash.
I wiped and installed Flexreaper.
I liked it but wanted a higher prize. I make a nandroid backup of it onto the external_sd and wiped and installed CM 10.1 from this thread.
This is where everything started going sour. It told me the install was invalid halfway. Disappointed, I wiped again and tried to restore my nandroid backup. It seemed to restore properly, but then Skrillax hung forever loading the kernel.
I wiped again and installed Flexreaper fresh. This time it booted. I downloaded the newest unofficial version of CM they mention on their wiki.
Booted to recovery and installed CM 10. It ran fine and I was impressed with the new OS. Then I noticed the apparent lack of Gapps.
I flashed the Gapps Jellybean package and rebooted. Skrillax hung.
Wiped everything I could fine in the TWRP menu and installed Flexreaper. Got past the primary kernel loading but the android icon would work for a bit then flash, starting all over again.
At this point I flashed several other recoveries, hoping it was my recovery. No such luck. I tried all of them included in V8.
Then finally, I downloaded full stock ICS and flashed it. I rebooted and noticed the same Android flashing thing.
Finally, I flashed V8 again, being the newbie I was, and then suddenly remembered while trying to boot to recovery that the Full install probably rewrote the recovery-from-boot.p.
And here I am.
Tl;dr version:
Went click-happy with ROMs, wiping, and recovery flashing until I was left with a stock OS that wouldn't boot with a Skrillax bootloader but no recovery.
The good news is, I still have cpuid+sbk, it still boots to APX (no idea how I didn't screw that up too.), and I have a nandroid backup on my external_sd which is probably untouched, since I was careful to not wipe it in TWRP.
Please help me fix this. I don't want an excuse to waste money on a flashy new Nexus or Asus Transformer tablet, I already have too many for my wallet's comfort.
Click to expand...
Click to collapse
Babsector should still work - you would need t do a search for it
It seems to have worked properly, sort of. Flashing FLEXReaper results in an "Encryption failed." prompt at boot, which the button, of course, does not work. Wiping everything works except that the prompt notes "E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p4" Trying to reflash V8 with TWRP with the V8.bat file fails at format. More help?
My tablet is still displaying "Encryption failed", the button still doesn't work, and I still love my a500. Help?
Anyone?
I guess I'm screwed, then.
In the end, I think my data partition failed. Formatting or wiping data fails and when installing FlexReaper, it reports /data size as -1. Unless anyone knows how to fix flash memory, I think I'm stuck.
The first issue I started to notice after rooting via Odin & TWRP was when trying to flash the iOS and WP ROMs from this thread, http://forum.xda-developers.com/android/software/3oss-project-samsung-galaxy-tab-4-7inch-t3081478 , it would fail. I was able to successfully flash the Google ROM from same post. I believe it was with one of the other ones that it even said successful yet when i went to reboot said no OS installed. So, I figured update my TWRP to newest version, maybe that was the problem. Well after updating, now when i go to wipe/factory reset it either says unable to mount or it doesnt even make it that far and reboots system. I tried flashing PIT file with Odin and issue persists. Everything still works smoothly but any help fixing this issue would be much appreciated as I do not want to dirty flash anything. Thanks in advance.
So now...after flashing stock firmware, it boots all the way to nook screen (right after samsung logo) and stops. I can boot into TWRP but it still says unable to mount data. Also, in TWRP when i click mount, the only one already checked is cache. I can manually select all others except data. When i go to install, the internal sd has absolutely nothing on it...really hope i didn's completely mess it up, sometimes my eagerness to learn gets the better of me. Thanks again for any help!
I have the same issue, im stuck