[Q] What's next - Galaxy S 4 Q&A, Help & Troubleshooting

I'm going to flash the new ROM over my 4.4.2 S4 LTE. After flashing this new ROM, what are the necessary steps I should do to get my phone rooted?
Which are the compatible flashing/rooting programs to use for this new ROM?

greeny2010 said:
I'm going to flash the new ROM over my 4.4.2 S4 LTE. After flashing this new ROM, what are the necessary steps I should do to get my phone rooted?
Which are the compatible flashing/rooting programs to use for this new ROM?
Click to expand...
Click to collapse
You're talking about official 5.0.1?

GDReaper said:
You're talking about official 5.0.1?
Click to expand...
Click to collapse
Yes. That's the ROM I'm talking about. I've just flashed Philipz recovery using Odin and everything looking fine. However, I still get the default recovery and not the PhilipZ version.
Is the 5.0.1 not ready for the present recover like Chainfire or Philipz?

greeny2010 said:
Yes. That's the ROM I'm talking about. I've just flashed Philipz recovery using Odin and everything looking fine. However, I still get the default recovery and not the PhilipZ version.
Is the 5.0.1 not ready for the present recover like Chainfire or Philipz?
Click to expand...
Click to collapse
I had problems flashing recovery on stock kitkat. Used a workaround with Nandroid manager from play. But you need root for that..
Maybe try a different recovery. I don't see why PhilZ would be the only one to work with the 5.0 rooting method presented somewhere around the forum.

A recovery has nothing to do with the version of the rom you have flashed.
Uncheck auto-reboot before flashing the rom with Odin.

Lennyz1988 said:
A recovery has nothing to do with the version of the rom you have flashed.
Uncheck auto-reboot before flashing the rom with Odin.
Click to expand...
Click to collapse
Will give this a try.
Update - No go with what you have described. Stuck at the end of Odin flashing. Have to pull out the battery. Luckily, phone still can boot but with the default recovery.

Related

[Q] S4 Bell 1337m wont boot after flash.

Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
BurnAll said:
Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
Click to expand...
Click to collapse
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
agent929 said:
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
Click to expand...
Click to collapse
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
heck at this point i'd be happy just to get it back to normal as its late and i need to sleep and work tomorrow
BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
agent929 said:
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
Click to expand...
Click to collapse
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
BurnAll said:
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
Click to expand...
Click to collapse
It says page not found...get the dots out of your link
Did you use your carriers Kernel?
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
agent929 said:
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
Click to expand...
Click to collapse
i have the m
BurnAll said:
i have the m
Click to expand...
Click to collapse
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
agent929 said:
It says page not found...get the dots out of your link
Click to expand...
Click to collapse
sorry here it is.
another fella on bell said this one worked for him
http://forum.xda-developers.com/showthread.php?p=41675354
lgsshedden said:
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
Click to expand...
Click to collapse
okay thanks i'll try to restore it using odin with the MG1 and then give the philz a shot. i'll update u once i've done so.
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
lgsshedden said:
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
Click to expand...
Click to collapse
okay got it back to stock, now quick question for the philz do i flash the .tar with odin? or do something else with the .zip?
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
agent929 said:
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
BurnAll said:
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
Click to expand...
Click to collapse
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
READ THIS FIRST:
MAKE SURE YOU DO NOT HAVE THE MF3 FIRMWARE ON YOUR S4. THAT IS THE MOST IMPORTANT THING TO DO RIGHT NOW. IF YOU DO, DO NOT ATTEMPT TO INSTALL A CUSTOM RECOVERY.
You don't have a custom recovery already that's why. Did casual not install TWRP for you? If not try installing Goo Manager from the app market and try installing TWRP that way. MAKE SURE THAT WHEN YOU INSTALL IT, IT SAYS YOUR MODEL NUMBER EXACTLY! I CAN NOT STRESS THIS ENOUGH! When you have TWRP installed, then flash philz with TWRP and you'll have that custom recovery instead.
BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
do not use the zip you quoted it is not for your phone
use odin flash the tar philz_touch_5.15.0-jfltecan.tar.md5
now you have stock updated MG1 firmware with the latest baseband
root by CF root
Philz Recovery
Now follow the next steps:
1. set up your google account play store etc.
2.next, go into the recovery and do a full nandroid backup -- this gives you a stable base you can restore when needed
3. go flash a custom rom, I highly recommend the latest version of Goldeneye -- updated, well maintained, great developer, clear install instructions
4. try itt then again, use recovery to make a 2nd nandroid, this one of your custom rom install -- try different kernels, every phone is different and someone's favorite kernel just may not like your phone -- doesn't make it a bad kernel just makes it the wrong one for your phone, flash a different one
5. theme if you want -- this is where your recoveries become important as themes are notorious for not always sitting well and all is ok if you have a backup you can return to
6. NEVER flash a baseband from another variant -- stick with your MG1 from your carrier until your carrier updates stock firmware

Att GS4 stuck in custom screen after reboot

My GS4 ATT keeps getting stuck on the Samsung Custom screen after rebooting my rom.
The initial reboot after doing a clean install works fine, but after restarting, it gets stuck.
I have tried 3 different roms so far and all have the same problem, any suggestions?
other information:
model#: sgh-1337
version 4.3
baseband:1337UCUAMDL
kernal:3.4.0-g4fe9989-dirty
what recovery
what roms did you try
by clean, i assume you wiped system also
i don't pay attn to kernel names. is that part of the rom you last flashed or did you get it elsewhere and if so exactly how did you flash it
rugmankc said:
what recovery
what roms did you try
by clean, i assume you wiped system also
i don't pay attn to kernel names. is that part of the rom you last flashed or did you get it elsewhere and if so exactly how did you flash it
Click to expand...
Click to collapse
I tried hyperdrive rls14 3 times and lquidsmooth, shostock, all have the same problem.
I flashed it through TWRP like normal, wipe, install, wipe chache ...
i might have to go back to stock via odin, but im currently running a mac.
is that kernel stock for one of the roms, if not flash rom with it's stock kernel
which twrp, 2.5.0.2 is best
rugmankc said:
is that kernel stock for one of the roms, if not flash rom with it's stock kernel
which twrp, 2.5.0.2 is best
Click to expand...
Click to collapse
its the stock kernals with the roms, im not sure which version of twrp I have because then I wont be able to boot into into rom.
ok, so you can't boot into recovery?
have you ever flashed and ran a rom successfully, which one?
if so, what has changed if anything to be a possible cause
rugmankc said:
ok, so you can't boot into recovery?
have you ever flashed and ran a rom successfully, which one?
if so, what has changed if anything to be a possible cause
Click to expand...
Click to collapse
No i can boot into recover, i cant boot into the rom after restarting (after installing the rom it will boot, but after restarting it gets stuck on boot)
I have ran many roms in the past, i flashed over stock root. I am not sure what to, and dont want to restore it completely unless its a must.
baseband is your radio, what's your Build number, if you know
i think on a mac you will need to use heimdal, this guy Ashton may be able to help if you go that route
http://forum.xda-developers.com/showthread.php?t=1917237
i just was confused. if you can't get to recovery, how did you flash 3 roms and have same issue?
rugmankc said:
baseband is your radio, what's your Build number, if you know
i think on a mac you will need to use heimdal, this guy Ashton may be able to help if you go that route
http://forum.xda-developers.com/showthread.php?t=1917237
i just was confused. if you can't get to recovery, how did you flash 3 roms and have same issue?
Click to expand...
Click to collapse
I dont think you completely understand my situation. So everything works fine, except when I restart my phone after flashing a new rom, it will get stuck on the samsung boot logo. this happens to every rom I have tried.
Bump.
gsr101 said:
Bump.
Click to expand...
Click to collapse
You do know that the first boot after flashing a rom is going to take longer than normal. I think that's what you're experiencing
jd1639 said:
You do know that the first boot after flashing a rom is going to take longer than normal. I think that's what you're experiencing
Click to expand...
Click to collapse
it boots perfectly after flashing the rom, but after i get into the rom and install stuff and then I reboot causes the phone to get stuck on the logo.
I noticed that there is something wrong with the root permissions.
gsr101 said:
it boots perfectly after flashing the rom, but after i get into the rom and install stuff and then I reboot causes the phone to get stuck on the logo.
I noticed that there is something wrong with the root permissions.
Click to expand...
Click to collapse
Try flashing super su in recovery again
jd1639 said:
Try flashing super su in recovery again
Click to expand...
Click to collapse
I have, it works but wont boot into the os unless i wipe and install the rom again
gsr101 said:
I have, it works but wont boot into the os unless i wipe and install the rom again
Click to expand...
Click to collapse
What recovery are you using?
also, i don't remember you saying what your build is, just the baseband.
these things uaually happen if you are flashing a rom not meant for your phone or an incompatible kernel
rugmankc said:
also, i don't remember you saying what your build is, just the baseband.
these things uaually happen if you are flashing a rom not meant for your phone or an incompatible kernel
Click to expand...
Click to collapse
oh, thanks for the help. I really want to run Hyperdrive RLS14 on it, so should I goto stock then update and root?
well, would like to know your build not baseband
ie, mdl, mf3, mk2
otherwise back to stock thru heimdall, since you are on mac, may be path, never used it but there is info on it thru google searches
also, if possible backing up important info on internal card and reformatting may be another option
rugmankc said:
well, would like to know your build not baseband
ie, mdl, mf3, mk2
otherwise back to stock thru heimdall, since you are on mac, may be path, never used it but there is info on it thru google searches
also, if possible backing up important info on internal card and reformatting may be another option
Click to expand...
Click to collapse
My BASEBAND says MDL, My BUILD says RLS13.
gsr101 said:
My BASEBAND says MDL, My BUILD says RLS13.
Click to expand...
Click to collapse
Still think it's an issue with your recovery. Google twrp 2.5.0.2 zip xda and flash that in your current recovery. Then flash your rom and see if you still have the problem

[Q] Flash from recovery or Odin

Sorry if this is a simple question; What I want to know is, do I have to use some recovery mod and flash from the SD card, or can I simply flash custom ROMs from odin 3.09, the same as I did for my stock rom?
Specifically Imperium ROM: http://forum.xda-developers.com/showthread.php?t=2706844&nocache=1
Many thanks.
OriginUK said:
Sorry if this is a simple question; What I want to know is, do I have to use some recovery mod and flash from the SD card, or can I simply flash custom ROMs from odin 3.09, the same as I did for my stock rom?
Specifically Imperium ROM: http://forum.xda-developers.com/showthread.php?t=2706844&nocache=1
Many thanks.
Click to expand...
Click to collapse
You always need a custom recovery to flash roms from either your internal or external sd card
I'd suggest philz recovery just flash the .tar file from here in odin then enter recovery & flash away
Not sure if you have rooted your phone as yet if not follow this link first
Okay, I never used a custom recovery when flashing the stock rom.?
I can't just download and flash the rom in Odin from my pc then?
OriginUK said:
Okay, I never used a custom recovery when flashing the stock rom.?
I can't just download and flash the rom in Odin from my pc then?
Click to expand...
Click to collapse
No bud you can't :crying:
You aren't flashing a stock rom it's a custom rom hence the custom recovery ?
Darn, and I thought it was all so easy!
Okay, I need to start looking how to put a custom recovery on then.
I have rooted it using Odin already yeah
OriginUK said:
Darn, and I thought it was all so easy!
Okay, I need to start looking how to put a custom recovery on then.
I have rooted it using Odin already yeah
Click to expand...
Click to collapse
Just flash the .tar file I gave you a link to & your good to go ? Honestly it's dead easy fella
Need any more help just ask
11calcal said:
Just flash the .tar file I gave you a link to & your good to go ? Honestly it's dead easy fella
Need any more help just ask
Click to expand...
Click to collapse
Thanks man. Is that flashed in the same field as when doing Roms? (Pda)
I have to Flash the new rom from recovery then? I can't just use odin again?
Thanks again.
OriginUK said:
Thanks man. Is that flashed in the same field as when doing Roms? (Pda)
I have to Flash the new rom from recovery then? I can't just use odin again?
Thanks again.
Click to expand...
Click to collapse
Yeah just flash it in pda then flash rom from philz recovery then it's done just setup required
You won't need odin again unless you want to return to stock (which I doubt).
P.s you should like the imperium rom you've been lookin at
11calcal said:
Yeah just flash it in pda then flash rom from philz recovery then it's done just setup required
You won't need odin again unless you want to return to stock (which I doubt).
P.s you should like the imperium rom you've been lookin at
Click to expand...
Click to collapse
Thanks, its between that one and Purified with Domination theme (http://forum.xda-developers.com/showthread.php?t=2454205). Not sure which to go for yet, it'll be down to style/reliability/stability/speed.
What I meant was, I can't flash the recovery in odin, then flash the new rom in odin too?
OriginUK said:
Thanks, its between that one and Purified with Domination theme (http://forum.xda-developers.com/showthread.php?t=2454205). Not sure which to go for yet, it'll be down to style/reliability/stability/speed.
What I meant was, I can't flash the recovery in odin, then flash the new rom in odin too?
Click to expand...
Click to collapse
No just flash recovery in odin & then just use recovery (power/volume up) to flash rom. No need for odin again

[Q] lost root and can't get it back

Hi all,
I rooted my smg900f two days ago and flashed a recovery, everything went fine, I tried a couple of custom rom and at some point I noticed that I didn't have root access anymore (checked with root checker). I launched towelroot again, and now it says that my device is not supported yet. Does anybody encountered the same issue ?
ElChouch said:
Hi all,
I rooted my smg900f two days ago and flashed a recovery, everything went fine, I tried a couple of custom rom and at some point I noticed that I didn't have root access anymore (checked with root checker). I launched towelroot again, and now it says that my device is not supported yet. Does anybody encountered the same issue ?
Click to expand...
Click to collapse
Just flash the latest superSU.zip with a custom recovery, link http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip.
Thanks for the tip but it didn't work
ElChouch said:
Thanks for the tip but it didn't work
Click to expand...
Click to collapse
What recovery do you have and what did you do exactly?
gee2012 said:
What recovery do you have and what did you do exactly?
Click to expand...
Click to collapse
I have clockwork recovery, I had Omega ROM running on my phone (maybe at this moment I already lost root but I only noticed it after), I tried to flash this mod, it didn't work so after a few tries I full wiped my phone and insalled Omega 8.0 again. Then I noticed I lost root access when trying to open some apps.
I also flashed the bootloader for SMG900F featured in the Omega rom thread
That's about it
ElChouch said:
I have clockwork recovery, I had Omega ROM running on my phone (maybe at this moment I already lost root but I only noticed it after), I tried to flash this mod, it didn't work so after a few tries I full wiped my phone and insalled Omega 8.0 again. Then I noticed I lost root access when trying to open some apps.
I also flashed the bootloader for SMG900F featured in the Omega rom thread
That's about it
Click to expand...
Click to collapse
Flash CF Auto Root with Odin, your KNOX flag is tripped anyway. Link http://download.chainfire.eu/397/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltexx-smg900f.zip.
gee2012 said:
Flash CF Auto Root with Odin, your KNOX flag is tripped anyway. Link http://download.chainfire.eu/397/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltexx-smg900f.zip.
Click to expand...
Click to collapse
Might be a stupid question but in which slot should I load the tar file ? BL/AP/CP/CSC ?
ElChouch said:
Might be a stupid question but in which slot should I load the tar file ? BL/AP/CP/CSC ?
Click to expand...
Click to collapse
AP is the right one.
gee2012 said:
AP is the right one.
Click to expand...
Click to collapse
This didn't work neither :-/
ElChouch said:
This didn't work neither :-/
Click to expand...
Click to collapse
Then i suggest you flash a stock rom, factory reset and root/flash custom recovery from scratch. Its seems some files are messed up that prevents you to root. Backup important files to the pc/sdcard first. That is what i would do at least
gee2012 said:
Then i suggest you flash a stock rom, factory reset and root/flash custom recovery from scratch. Its seems some files are messed up that prevents you to root. Backup important files to the pc/sdcard first. That is what i would do at least
Click to expand...
Click to collapse
I ll try this asap thanks for the help
ElChouch said:
I ll try this asap thanks for the help
Click to expand...
Click to collapse
Good luck mate. After the flash and factory reset flash a custom recovery and then the superSU.zip and you`re rooted.
gee2012 said:
Good luck mate. After the flash and factory reset flash a custom recovery and then the superSU.zip and you`re rooted.
Click to expand...
Click to collapse
Last question (I hope) I have backup files (from my stock rom) I generated with CWM recovery, but it seems I lost CWM too, can I flash this backup with Odin ?
ElChouch said:
Last question (I hope) I have backup files (from my stock rom) I generated with CWM recovery, but it seems I lost CWM too, can I flash this backup with Odin ?
Click to expand...
Click to collapse
There should be a folder on the sdcard named Clockworkmod with the backup, save it to the sdcard before you factory reset. No a backup can`t be flashed with Odin, only in recovery
gee2012 said:
There should be a folder on the sdcard named Clockworkmod with the backup, save it to the sdcard before you factory reset. No a backup can`t be flashed with Odin, only in recovery
Click to expand...
Click to collapse
Ok so I got this rom Alvin's_G900F_XXU1ANG2_Deodexed I boot in regular recovery, start flashing the rom, but it doesn't work and I'm still stuck on Omega rom with no root nor custom recovery :-/ what did I do wrong ?
ElChouch said:
Ok so I got this rom Alvin's_G900F_XXU1ANG2_Deodexed I boot in regular recovery, start flashing the rom, but it doesn't work and I'm still stuck on Omega rom with no root nor custom recovery :-/ what did I do wrong ?
Click to expand...
Click to collapse
Did you flash a stock rom with Odin or flash a custom rom in 3rd recovery? Just do a data factory reset in recovery, pull the battery and wait 20 seconds and flash a stock rom with Odin.
gee2012 said:
Did you flash a stock rom with Odin or flash a custom rom in 3rd recovery? Just do a data factory reset in recovery, pull the battery and wait 20 seconds and flash a stock rom with Odin.
Click to expand...
Click to collapse
There is definitely something i miss... The Rom I downloaded is a .zip with the regular boot.img and all that stuff into it, I can't flash that with Odin right ? I need a .tar right ?
ElChouch said:
There is definitely something i miss... The Rom I downloaded is a .zip with the regular boot.img and all that stuff into it, I can't flash that with Odin right ? I need a .tar right ?
Click to expand...
Click to collapse
You need a md5/tar file for Odin, look on Sammobile/firmwares for it.
gee2012 said:
You need a md5/tar file for Odin, look on Sammobile/firmwares for it.
Click to expand...
Click to collapse
I did it all as you said, everything went fine, Odin said it passed the rom flashing, but then I'm stuck in a boot loop any idea ?
I'm about to try to flash a stock bootloader
ElChouch said:
I did it all as you said, everything went fine, Odin said it passed the rom flashing, but then I'm stuck in a boot loop any idea ?
I'm about to try to flash a stock bootloader
Click to expand...
Click to collapse
No, pull the battery andere wait 20 seconds. Then boot into recovery and data factory reset and reboot.

Stock ROM Backup

Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
pmlfrew said:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
Click to expand...
Click to collapse
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Racinghart91 said:
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Click to expand...
Click to collapse
Thanks will flash to lollipop today then....
pmlfrew said:
Thanks will flash to lollipop today then....
Click to expand...
Click to collapse
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
pmlfrew said:
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
Click to expand...
Click to collapse
I got it working by flashing the German non branded ROM... Got the error message again but then used a "All samsung recovery.tar" as stated on another post in here and it booted fine eventually... Now on Lollipop. Now time to flash with TWRP.... Again!!!
Please, i need help !
I need help, urgently !
My Note 4 SM-N910C does not work. I can enter the Recovery and the Download Mode. When attempting to install a Custom ROM gives me an error that says I have no data. In the internal memory I have 0mb.
I tried using odin, but I can not .. Salta error.
Someone who can make a backup of your phone (which is factory), leave me a link to download it? So I install the TWRP. Please.
They have another solution?
Thank you.:good:

Categories

Resources