Related
Hello, a theme ( http://forum.xda-developers.com/showthread.php?t=1328950 ) did brick my device, am using Task650 version 10 ROM WiFi only model 16GB, i installed the "Layers In Paris V3 theme zip file over his rom and now my device get passed the the booth animation, i wiped/reset factory setting, wiped dalvick, cache, and wiped system, it wouldnt get passed it, now i formatted system from recovery and it won't get passed the Samsung Galaxy Tab 10.1 writing you see when you power the Tab on, i need help on what to do because i can't even access the memory to load a ROM zip to reflash it.
someone wrote to me "to set up adb which lets you push files to your tab"
So the question is this too
What is adb ? "to set up adb which lets you push files to your tab" When i went to mount SD card in recovery, the systems keep telling me that "E:unable to open ums file lunfile (No such file or directory) Couldn't open directory," Then what do i do to load new ROM and flash it again or get my tablet working ? Please i need help here
Well you've just learned rule #1 the hard way. Always do a nandroid backup from CMW.
You could restore back to stock using ODIN. All the files you need are in the How To Root thread.
Jay Evans said:
Well you've just learned rule #1 the hard way. Always do a nandroid backup from CMW.
You could restore back to stock using ODIN. All the files you need are in the How To Root thread.
Click to expand...
Click to collapse
Yes i really learnt it the hard way, besides now i know, but can you provide a link to that thread ? but the tablet wouldn't mount on SD Card anymore ? the computer don't see it as a removable drive like it always does, so how would i restore back to stock when i can't load the zip file ?
install Kies at first
zinty said:
Yes i really learnt it the hard way, besides now i know, but can you provide a link to that thread ? but the tablet wouldn't mount on SD Card anymore ? the computer don't see it as a removable drive like it always does, so how would i restore back to stock when i can't load the zip file ?
Click to expand...
Click to collapse
This is the wrong place to ask these questions and there will be people telling you that soon
If you can get into download mode, use Odin to flash stock. Thread below with all info how to do that.
http://forum.xda-developers.com/showthread.php?t=1171089
xpakage said:
This is the wrong place to ask these questions and there will be people telling you that soon
If you can get into download mode, use Odin to flash stock. Thread below with all info how to do that.
http://forum.xda-developers.com/showthread.php?t=1171089
Click to expand...
Click to collapse
Stock What ? ROM or recovery and after that, what happens since i have wiped off the OS inside it when i did system/format ? Yes i have kies a long time ago in my computer but Kies doesnt see the tab if i connect it to the computer but i can still go into downloading mode.
zinty said:
Stock What ? ROM or recovery and after that, what happens since i have wiped off the OS inside it when i did system/format ? Yes i have kies a long time ago in my computer but Kies doesnt see the tab if i connect it to the computer but i can still go into downloading mode.
Click to expand...
Click to collapse
Odin restore will return your device (ROM AND RECOVERY) back to stock. Just boot your tab into download mode then connect to your computer with odin running and you will see a yellow box showing your device is connected. If it doesn't detect it, you need to get the correct drivers.
Sent from my GT-P7510 using Tapatalk
zinty said:
Stock What ? ROM or recovery and after that, what happens since i have wiped off the OS inside it when i did system/format ? Yes i have kies a long time ago in my computer but Kies doesnt see the tab if i connect it to the computer but i can still go into downloading mode.
Click to expand...
Click to collapse
Cromius said:
Odin restore will return your device (ROM AND RECOVERY) back to stock. Just boot your tab into download mode then connect to your computer with odin running and you will see a yellow box showing your device is connected. If it doesn't detect it, you need to get the correct drivers.
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
And then from the stock ROM listed in the provided link, you will then flash the CWM/Recovery to be able to flash a ROM you want to run/flash.
xpakage said:
And then from the stock ROM listed in the provided link, you will then flash the CWM/Recovery to be able to flash a ROM you want to run/flash.
Click to expand...
Click to collapse
Ok thanks so much guys, i have flashed the stock recovery with Odin but it still stops at Samsung Galaxy Tab 10.1 welcome message and won't open the USB Storage for me to load the stock rom, so how do i flash it into the Tab with this Odin i used to restore stock recovery, please i help me one more time, i have learnt my lessons already
Get an ipad
iaminflames said:
Get an ipad
Click to expand...
Click to collapse
Bro, that's not cool, anyone can make a mistake, besides i was only trying to flash a theme, like i always did, no one told me to choose android, i know the best so i went for it, this a place to help everyone not to laugh at them, if you have answers to my last request, please give it to me, thanks.
Ok thanks so much guys, i have flashed the stock recovery with Odin but it still stops at Samsung Galaxy Tab 10.1 welcome message and won't open the USB Storage for me to load the stock rom, so how do i flash it into the Tab with this Odin i have used to restore stock recovery, please i need help here one more time, i have learnt my lessons already
One more lesson you need to learn is, post in the right section? You think QaA stands for Quinn and Anderson? Since you didnt even manage to read the forum rules and post right it was only a mather of time before you bricked something
Sent from my GT-I9100 using xda premium
FLASH STOCK ROM FROM ODIN ALSO FLASH FLASH FLASH ODIN ODIN. You should manage the rest
Sent from my GT-I9100 using xda premium
zinty said:
Ok thanks so much guys, i have flashed the stock recovery with Odin but it still stops at Samsung Galaxy Tab 10.1 welcome message and won't open the USB Storage for me to load the stock rom, so how do i flash it into the Tab with this Odin i used to restore stock recovery, please i help me one more time, i have learnt my lessons already
Click to expand...
Click to collapse
Try going into download and Odin flash the stock ROM again.
If the stock ROM flashed correctly, after up to a 10 minute wait, it should boot into the stock ROM. Then you will go into download again, Odin flash either the recovery from that link or the newer recovery from the below link. You should be able to place the Rom of choice on the SD and flash through recovery.
http://forum.xda-developers.com/showthread.php?t=1090289
norpan111 said:
One more lesson you need to learn is, post in the right section? You think QaA stands for Quinn and Anderson? Since you didnt even manage to read the forum rules and post right it was only a mather of time before you bricked something
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Isn't there also a rule against flaming, and letting mods do the modding?
Sent from my SGH-T989 using xda premium
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
iaminflames said:
Get an ipad
Click to expand...
Click to collapse
+1. Considering the questions, I think a leappad might make more sense.
Thanks guys, my tablet is back, i really appreciate the help and sorry Admin, i didn't know the right place to put the thread, besides that's the side i visit always, that was why i dropped it there, please for some of us, next time, don't joke about things, no one is perfect. Am so happy, thanks everyone.
Hi. I'm not sure if there's someone who can build device specific CWM and I've been wondering if it's possible.
I've tried to flash several device specific CWM recovery fieles on my Galaxy Tab 10.1 LTE, SC-01D(available in Japan).
However, it didn't work.
It freezes when the vendor's logo appear.
I know it's not easy to build CWM, especially for the device which is working on different CPU(it's not tegra2).
I would much appreciate if some of you genius build it for us, SC-01D user.
Thank you.
I'm using cwmr_touch_beta5_maguro on my sc-04d now. Working perfectly.
Oh nice! Thanks for the info!
I'll check it out and will try it when I get home today!
Sent from my GT-I9100 using XDA
Devowa said:
Oh nice! Thanks for the info!
I'll check it out and will try it when I get home today!
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Ah I've missed read.
I don't think it's working on SC-01D.
Because, it's for nexus(sc-04D), not for Galaxy Tab 10.1 LTE, sc-01D.
Anyway, thanks.
Does anyone know how to make / who can make a device specific CWM recovery?
Sent from my GT-I9100 using XDA
Fixed mine... HTH
I had a similar experience - I tried to use the file recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 with Odin on my Docomo Galaxy SC-01D and it wouldn't reboot properly. I was lucky enough that I could boot back into the Download mode (Power+Vol Down).
To recover my Tab, I used the CWM tar file found here:
wwwDOTteamovercomeDOTnet/p7500/?page_id=5
NOTE: I cannot post links yet, so I put DOT instead of .
After using that file, I can reboot into the OS and everything seems normal now. YMMV. I'm not brave enough to try anything further tonight, but tomorrow is another day. =)
Any one SC-01D user who already successful with custom recovery ?
shepherd17 said:
I had a similar experience - I tried to use the file recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 with Odin on my Docomo Galaxy SC-01D and it wouldn't reboot properly. I was lucky enough that I could boot back into the Download mode (Power+Vol Down).
To recover my Tab, I used the CWM tar file found here:
wwwDOTteamovercomeDOTnet/p7500/?page_id=5
NOTE: I cannot post links yet, so I put DOT instead of .
After using that file, I can reboot into the OS and everything seems normal now. YMMV. I'm not brave enough to try anything further tonight, but tomorrow is another day. =)
Click to expand...
Click to collapse
hi
I have the galaxy tab 7 7 with Honeycomb ?
I need to hard reset it
how to do it ?
Settings > privacy> factory reset.
Done ;-)
Sent from my GT-P6800 using XDA Premium HD app
Hard reset is slightly different to factory reset. Wiping internal sdcard I believe, and possibly more
For SGS, type *2767*3855# into dialer
Not sure if work on our tab though.
Sent from my GT-P6810 using xda premium
hi again
help please .
I did hard reset my tab but it still problem to start up
I use the LCD Density Modder Pro v2.4.2
it mess up the my tab
I don't know how to fix this problem
I'm pretty sure a factory reset from settings doesn't touch /system. If you messed up something in there (such as LCD density) your best bet is to flash a stock ROM through Odin. There's a thread in the dev forum that has links to download all the stock firmwares and instructions on how to use Odin.
carlo67 said:
hi again
help please .
I did hard reset my tab but it still problem to start up
I use the LCD Density Modder Pro v2.4.2
it mess up the my tab
I don't know how to fix this problem
Click to expand...
Click to collapse
You should have told the exact problem before.....
Follow the post suggestion above and all will be fine if you follow the guide exactly.
Just make sure you flash P6800 firmware for P6800 & P6810 firmware for P6810.
If you can, factory reset and wipe cache etc in recovery first, then immediately boot into download mode and flash the stock firmware with Odin.
Sent from my GT-I9100 using xda premium
ok
I am new to Odin , I need lot of help.
which rom is good for galaxy tab 7.7/?
Read the stickies first
http://forum.xda-developers.com/showthread.php?t=1469635
And evil penguin excellent guide here;
http://forum.xda-developers.com/showthread.php?t=1587072
Sent from my GT-I9100 using xda premium
hi again;
can I do this on galaxy tab 7.7 https://www.youtube.com/watch?v=UDtxnH4lFuk&feature=fvst
I want to do reset [when it was out the bo]
It may or may not work.
My advice to you is to follow the proven guides using Odin 1.85.
Ensure Kies drivers are loaded, but kies not running with using Odin at the same time. They don't play well together.
You don't want to be yet another "plz help I'm bricked" post! Do you?
Remember;
Just hit "thanks" to any who try to help in XDA .... your welcome
Sent from my GT-I9100 using xda premium
I'm bricked" post! Do you? NO LOL
I haven't use the Odin before
and I can't get it in download mode because I am disabled guy I can't push buttons to get to in download mode
Is your tab rooted yet?
If yes;
And you don't have extended power menu or similar with download mode, recovery etc included, you can download reboot widget from Market (Google Play) and config indiviidual one touch widgets to homescreen for reboot, download, recovery etc. Should make life a little easier......
I wouldn't recommend trying the method shown (edit: in you video) as not for our device.
yes rooted
thank you this widget, I can't use widget for this problem because the LCD Density Modder Pro v2.4.2 broke my tablet.
I was very silly to use app
I tried to make bloody text big lol
So please explain what exact state of your tab? Aslo your model no. and current firmware?
What the tab can and can't do, also yourself?
Just a guess at this "blind" stage that maybe your buildprop file is messed up.
Is it possible to boot into recovery? (yes I know same buttons, but just asking anyway)
I don't know what is version of current firmware. I just got the tab last week. I got the Samsung Galaxy Tab 7.7" P6800 3G WiFi
I can do push buttons ok but I can't push 2 buttons all same time.
I am computers geek i have lot of experience with windows operating [3.1/11, windows 98/me/xp/Vista /7] and little bit of android
the tab can boot up [passed lock screen ok but it gives a error ]] I can't go pass this error.
yes can go into the recovery mode
question
where I can download firmware for Samsung Galaxy Tab 7.7" P6800 3G WiFi?
and
where I can download the Odin
I was wondering if possible Enter recovery mode and downloading mode from command line from pc?
if possible, it will be GREAT
carlo67 said:
I don't know what is version of current firmware. I just got the tab last week. I got the Samsung Galaxy Tab 7.7" P6800 3G WiFi
I can do push buttons ok but I can't push 2 buttons all same time.
I am computers geek i have lot of experience with windows operating [3.1/11, windows 98/me/xp/Vista /7] and little bit of android
the tab can boot up [passed lock screen ok but it gives a error ]] I can't go pass this error.
yes can go into the recovery mode
Click to expand...
Click to collapse
Suppose it doesn't matter if you just want your tab up and running and workiing. Had an idea of just pushing the stock build.prop file to your system directory, but you don't know what firmware version....
Since you can go into recovery, do you have a CWM Recovery and nandroid backup? If so, just flash that back. Wipe data, cahe, format system, advanced/dalvik immediately BEFORE
carlo67 said:
question
where I can download firmware for Samsung Galaxy Tab 7.7" P6800 3G WiFi?
and
where I can download the Odin
Click to expand...
Click to collapse
Read the forum stickies.............
http://forum.xda-developers.com/showthread.php?t=1469635
carlo67 said:
I was wondering if possible Enter recovery mode and downloading mode from command line from pc?
if possible, it will be GREAT
Click to expand...
Click to collapse
Yes, if you are familiar with ADB and have it setup already, will be easy
If not, there are guides on the internet for setup and use.
Power up phone;
In CMD type: adb devices
This will check device can connect to PC through ADB CMD - will return device serial no. if ok)
1. In CMD type: adb reboot recovery
2. Wipe & Flash nandroid backup
or
1. In CMD type: adb reboot download
2. Ensure SDamsung drivers are installed to PC
3. Ensure KIES is NOT running
4. Connect phone to PC and wait for driver initialisation
5. Run Odin
6. READ & Follow guide, link to I posted exactly and you should be ok
ok
unfortunately I don't have CWM Recovery and nandroid backup
I have the ADB. I will try it and I will let you
carlo67 said:
ok
unfortunately I don't have CWM Recovery and nandroid backup
I have the ADB. I will try it and I will let you
Click to expand...
Click to collapse
Since no CWM Recovery, try this before using Odin;
Power up phone;
In CMD type: adb devices
This will check device can connect to PC through ADB CMD - will return device serial no. if ok)
1. In CMD type: adb reboot recovery
2. In Stock Recovery - Factory reset, wipe cache and dalvik (dalvik if available in stock recovery, can't remember)
3. Reboot, may take a few minutes
Hi, i have a galaxy tab 2 10.1 P5100 and i need to install VNC server. VNC server apps needs rooted device to run, so i want to root my tab..
I have follow this thread step by step but i still have no luck to push CWM.. After flash GT-P5100_ClockworkMod-Recovery_5.5.0.4.tar in ODIN, I restart my device into recovery mode but it goes into Android recovery <3e> not into CWM.. has anyone facing this problem?
yuiaddict said:
I have follow this thread step by step but i still have no luck to push CWM.. After flash GT-P5100_ClockworkMod-Recovery_5.5.0.4.tar in ODIN, I restart my device into recovery mode but it goes into Android recovery <3e> not into CWM.. has anyone facing this problem?
Click to expand...
Click to collapse
Hi.
1) When you connect your Tab to the PC does ODIN recognize it? As in in one of the little boxes it should say something like "COM4".
2) Is your tablet is in download mode? This displays the green android with what I think is Metatron's Cube as its heart.
3) Are you making sure that the .tar file is being placed under PDA?
3) Do you get the green box at the completion of the flash?
4) Can you get past 3E recovery to the Samsung logo then to your home screens(s)?
I have same problem with P5113
I am having the same problem with my P5113. The answer to questions 1, 2 and both 3's is yes. For question 4 if your asking can I reboot to stock and use the tablet then that is a yes also. Like yuiaddict I have followed the step just as they are written several times without sucess. I have 4.0.4 installed.
murdawg said:
I am having the same problem with my P5113. The answer to questions 1, 2 and both 3's is yes. For question 4 if your asking can I reboot to stock and use the tablet then that is a yes also. Like yuiaddict I have followed the step just as they are written several times without sucess. I have 4.0.4 installed.
Click to expand...
Click to collapse
Some ppl are having problems flashing cwm on 4.0.4, downgrade to 4.0.3
Sent from my XT860 using xda premium
How do I downgrade to 4.0.3?
murdawg said:
How do I downgrade to 4.0.3?
Click to expand...
Click to collapse
Follow the return to stock instructions
http://forum.xda-developers.com/showthread.php?p=27671362
Sent from my XT860 using xda premium
same
i also cant flash clockworkmod on mp p3100 even after truing this link
So I was trying to find galaxy s2 original touch sound for change the touch sound of my galaxy s4 ( don't ask me why haha )
and there are no results about touch sounds from galaxy s2 on google...:crying:
plz anyone can upload the galaxy s2 ui sounds or just touch sound?
thanks!!
karao said:
So I was trying to find galaxy s2 original touch sound for change the touch sound of my galaxy s4 ( don't ask me why haha )
and there are no results about touch sounds from galaxy s2 on google...:crying:
plz anyone can upload the galaxy s2 ui sounds or just touch sound?
thanks!!
Click to expand...
Click to collapse
extract them from firmware
it is not difficult
Hi all
Since i cant make a New topic i use this one.
I have the following problem, i have rooted my galaxy s4 using odin and all went well. The Phone got rooted and supersu did automaticly installed during the rooting process.
The only problem i cant figure out is how entering the cwm recovery. Using the combination buttons i should use the Phone enters the system recovery and not the cwm recovery. So cwm functions i need for installing zip files i dont have.
What have i doing wrong or What am i missing?
Sent from my GT-I9505 using XDA Premium 4 mobile app
iDreamliner said:
Hi all
Since i cant make a New topic i use this one.
I have the following problem, i have rooted my galaxy s4 using odin and all went well. The Phone got rooted and supersu did automaticly installed during the rooting process.
The only problem i cant figure out is how entering the cwm recovery. Using the combination buttons i should use the Phone enters the system recovery and not the cwm recovery. So cwm functions i need for installing zip files i dont have.
What have i doing wrong or What am i missing?
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I take it you used autoroot method ? That only roots device & doesn't install custom recovery
Here's a cwm custom rec-just flash tar in Odin as you did when you rooted & you'll have custom rec or search Philz.tar & do the same
Thx that worked but need a bit more help.
When i reboot the Phone in cwm recovery i get a notification: rom May flash stock recovery on boot. Fix? This can not be undone.
I can press no or yes-disable recovery flash
When press no another notification promped up saying: root access possibly lost. Fix? This can not be undone.
I now can press no or yes Fix root.
What to do?
Sent from my GT-I9505 using XDA Premium 4 mobile app