Related
Hello everyone,
I had a Samsung S5 G900F from stock with Lollipop, and tried to root and change recovery with ODIN, first downloaded CF root, which ODIN said pass but on reboot said system error, and then downloaded twrp recovery which ODIN also said passed.
After, couldn't restart phone, couldn't go to recovery, no light when charging, through that had hard bricked phone. Removed battery went to dinner and after tried again, and was able to to to download mode, phone charges, and I am able to go to twrp recovery, but before it says
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
And when I reboot or start phone it stays in samsung s logo.
Can someone help?
Thanks
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
is normal - mine does that with TWRP too
Boot to TWRP, clear CACHE - Reboot
If that fails, factory reset from TWRP and try booting again
If that fails
Grab a custom ROM / Gapps, copy to MicroSD Card, boot to TWRP Recovery, wipe SYSTEM / DATA / CACHES - Flash ROM, Flash Gapps, Reboot
Or Grab a stock ROM from sammobile and flash from ODIN
*Detection* said:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
is normal - mine does that with TWRP too
Boot to TWRP, clear CACHE - Reboot
If that fails, factory reset from TWRP and try booting again
If that fails
Grab a custom ROM / Gapps, copy to MicroSD Card, boot to TWRP Recovery, wipe SYSTEM / DATA / CACHES - Flash ROM, Flash Gapps, Reboot
Or Grab a stock ROM from sammobile and flash from ODIN
Click to expand...
Click to collapse
Tks I will try the last option. The others, already had done and still same situation. Already had download a CM12 ROM and gapps just needed to install to try. So will try the last option and give a feedback later. Tks again.
*Detection* said:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
is normal - mine does that with TWRP too
Boot to TWRP, clear CACHE - Reboot
If that fails, factory reset from TWRP and try booting again
If that fails
Grab a custom ROM / Gapps, copy to MicroSD Card, boot to TWRP Recovery, wipe SYSTEM / DATA / CACHES - Flash ROM, Flash Gapps, Reboot
Or Grab a stock ROM from sammobile and flash from ODIN
Click to expand...
Click to collapse
It worked, flashed CM12 and gapps and its working.
Tks for the help.
Great
zzzferino said:
Hello everyone,
I had a Samsung S5 G900F from stock with Lollipop, and tried to root and change recovery with ODIN, first downloaded CF root, which ODIN said pass but on reboot said system error, and then downloaded twrp recovery which ODIN also said passed.
After, couldn't restart phone, couldn't go to recovery, no light when charging, through that had hard bricked phone. Removed battery went to dinner and after tried again, and was able to to to download mode, phone charges, and I am able to go to twrp recovery, but before it says
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
And when I reboot or start phone it stays in samsung s logo.
Can someone help?
Thanks
Click to expand...
Click to collapse
This is a knox error.
There are 3 ways to remove this:
1. Flash stock recovery (This is easier if you can get your hands on a stock recovery)
2. Delete knox (This is hard as there are duplicates)
3. Using Android terminal emulator
type: su (enter)
pm disable com.sec.knox.seandroid
Note: The third may not work. (I think it depends on the version idk)
Also try a custom ROM with knox removed.
Hello,
I´ve got a problem with my Samsung Galaxy S5
The History:
I bought a Samsung Galaxy S5 SM-G900f from Ebay with a Software Problem. The seller said, he try to flash a Custom Room like Cyanogenmod, he don´t know which)
The flash failed (i don´t know why). Now the S5 have a brick.
I tried so much, but i can´t repair it, pls help me.
The Problem is:
I can not start the Recovery Menü to flash a new Custom room. Always i tried to start the Menü, there is just a text "recovery Booting", then the phone restarts after round about 10 sec.
So even if i tried to start the S5 normally without recovery Menü, it´s just the Samsung Galaxy S5 Logo power by Android, then the phone restarts all the time.
The only thing i can do is start the download mode.
Things i tried:
- Firmware installation about Kies (pass, but still the Same Problem)
-Firmware Installation about Odin (pass, but still the same Problem)
- CF-Autoroot flashing (pass) then i tried to flash a recovery like PhilZ but then when i tried to open the recovery it`s "Recovery is not seandroid enforcing" Set Warranty bit
I tried so many firmwares but still the same Problem. Now it is installed Lollipop 5.0 G900FXXU1BOI3_G900FDBT1BOI1_G900FXXU1BOI3_HOME
There is no chance to repair it over ADB oder Fastboot, cause USB-debugging is disabled
Maybe you can help me and help me to stop spend all my time for this phone, cause im interested to know how i can repair it.
flash twrp from odin
then sideload a rom
install the rom
tell me if it works
.
I tried to install twrp 2.7.0.0-klte with odin. It´s pass, but when i tried to boot into Recovery he said "recovery is not seandroid enforce" Set Warranty bit: recovery
Pls help me i´ve got no idea more
Try this hold on (power volume up and home) then do not release until recovery mode boot
sh4dow6oy said:
flash twrp from odin
then sideload a rom
install the rom
tell me if it works
Click to expand...
Click to collapse
I tried to install twrp 2.7.0.0-klte with odin. It´s pass, but when i tried to boot into Recovery he said "recovery is not seandroid enforce" Set Warranty bit: recovery
Pls help me i´ve got no idea more
With some of the newer LP based firmwares, twrp 2.8.7.0 klte is the only version that works.....
Other than that, you might find it necessary to odin back to KitKat (flashing a pit file too) and try 'towelrooting' your device.......
BE WARNED.......If you *do* flash a pit file, make sure it's the CORRECT pit for your device.....In some cases, flashing the wrong pit will permanently kill a device.
http://i.imgur.com/rVnFwJM.jpg
So i had try it.
1.)hold on ( volume up and home) then do not release until recovery mode boot
--> The phone always restart no recovery is possible
2.) I try to install on LP the TWRP 2.8.7.0 Still the Same error "recovery is not seandroid enforce" Set Warranty bit: recovery
Before i root the device with CF-Autoroot and it´s pass
3.) I downgrade to 4.4.2 with a full package of Firmware with CSC,BL,AP,CP and a pit file.
The downgrade pass, when the phone starts it says recovery booting in blue script, then the phone restarts. I can´t intstall towelroot, cause the system is not booting, so i´d tried to install CF-Autoroot (pass) and then also the TWRP 2.7.0.0 pass but not booting and then 2.8.0.0.
But still the same "recovery is not seandroid enforce" Set Warranty bit: recovery
If you got a pass on your KK flash, you have a stock recovery......
Have you tried booting into that recovery and wiping cache and factory resetting? It is necessary to do this when downgrading......
http://i.imgur.com/rVnFwJM.jpg
Yes it was a KK stock recovery.
I tried to boot in this recovery, but when the phone starts it says recovery booting in blue script, then the phone restarts after a few seconds.
It´s not possible to wipe cache or make a factory reset, cause the recovery is not booting. That´s my problem. Also when i have flash the stock firmware i tried to go into the recovery but when the phone starts it says recovery booting in blue script, then the phone restarts after a few seconds. ( 4.4.2 and 5.0)
I´can´t flash a custom rom cause the recovery is not booting. I´ve no idea
Are you attempting the 3 button combination from powered off to get into recovery?........
@'detection' does the OP's situation sound familiar?.....
http://i.imgur.com/rVnFwJM.jpg
Very familiar -
https://dl.twrp.me/klte/
Flash TWRP 2.8.7.0 .TAR (Do not unzip) with ODIN 3.10.7 - in Download mode (Volume Down & Home & Power)
It will say "recovery is not seandroid enforce" Set Warranty bit" at the top when you boot into recovery, give it a few seconds and you should see the TWRP blue splash screen, and then recovery should load up
Then flash a custom ROM from TWRP
--
If that all still fails, try flashing the PIT file for the G900F along with a Stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract this one so it is .PIT, and add it to ODINs PIT section
If that still fails, try flashing just the PIT file with ODIN, and then the TWRP 2.8.7.0 with ODIN and see if you can get in that way
Or PIT and TWRP together
Try a combination until you get back in
Also try different versions of TWRP from 3.07 up to 3.10.7
keithross39 said:
Are you attempting the 3 button combination from powered off to get into recovery?........
@'detection' does the OP's situation sound familiar?.....
Yes i did, than the it happen what i wrote upside
What do you mean with "@'detection' does the OP's situation sound familiar?....."
Click to expand...
Click to collapse
It sounds familiar because it's happened to many other people recently too, although TWRP usually fixes it
Follow my instructions above
No chance guys,
i´d tried to install all TWRP which i found once in 5.0 and also i tried to install on 4.4.2. But always the same mistake. (recovery is not se.....)
Now i´ve tried to install CWM-Recovery and now there is no mistake like upside. Now in blue "recovery booting" and in yellow set warranty bit: recovery
But the recovery is not booting, the phone always make a restart. I´d also tried to install the recovery without auto-reboot in odin. But no help.
I don´t understand, cause when i flash a Stock Firmware, the recovery menu ,in my opinion, it have to start, but it doesn´t. Maybe i have anexpensive paper weight now
I search the internet to install a Custom room over Odin, but i don´t find any results, so i think it is not possible.
Do you have more ideas? Pls help. Thanks
I have the exact same problem, some are calling it the Black Screen of Death (with the blue led flicker). This is what happened to me:
0) had TWRP + latest 12.1 Cyanogenmod
1) installed the alpha 13 Cyanogenmod, which worked, more-or-less...
2) lost access to TWRP recovery, did not lose access to download
3) tried every single type of black magic from XDA (Kies, pit files, bootloader files, etc)
4) now it turns on, the LED turns blue and slowly, slowly flickers, but the screen is blank. At some point it plays the Samsung boot sound
Any help will be enormously appreciated.
check PM
bowzee said:
I have the exact same problem, some are calling it the Black Screen of Death (with the blue led flicker). This is what happened to me:
0) had TWRP + latest 12.1 Cyanogenmod
1) installed the alpha 13 Cyanogenmod, which worked, more-or-less...
2) lost access to TWRP recovery, did not lose access to download
3) tried every single type of black magic from XDA (Kies, pit files, bootloader files, etc)
4) now it turns on, the LED turns blue and slowly, slowly flickers, but the screen is blank. At some point it plays the Samsung boot sound
Any help will be enormously appreciated.
Click to expand...
Click to collapse
Another idea?
Joda899 said:
Another idea?
Click to expand...
Click to collapse
Ithink you should try re instal original firmware using odin and get ur warranty back then fix it on samsung
I found a trick that seems to help slightly, until an actual solution is published. During a misbehave episode, assuming that something shows up (which is not always the case):
1) press <power + home + vol-down> until the download thing shows up
2) press <up-arrow> so that it actually gets into download mode
3) press <power> until the screen turns off and immediately release (otherwise it will try to reboot); this makes it stay off
4) let it "rest" for a certain period of time (could be 5 minutes or more)
5) back to normal
Did u root your device vai CF auto root? Did it work?
This is not the first time i root an android device but it is the first time im doing it on an S5, nonetheless I am pretty much stuck right now.
I tried to install CF-Auto-Root-klte-kltexx-smg900f.tar using Odin from here, it installed with no problems, but when the phone restarted I get:
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and then it shuts down.
I tried to enter recovery mode by doing power+vol up+menu but nothing happens ?
Can anyone help ?
EDIT: ok, so I did manage to get it running again by flashing openrecovery-twrp-2.8.5.0-gt-klte. This got me past the "Recovery is not seandroid...", but all in all I still didn't manage to get root access...
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
You don't flash .img - you flash .tar
*Detection* said:
You don't flash .img - you flash .tar
Click to expand...
Click to collapse
I did flash .img.tar actually. Still no effect - boots to regular recovery. Can't figure this out...
i get in the same situation...why still rebooting in original recovery?
i installed this one CF-Auto-Root-klte-kltexx-smg900f.tar with odin with succes but still have
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
then when i boot i get a black screen with all application error....the only way to get it back working was to wipe factory reset in original recovery.
what can i do to get it working so i can install custom roms?
thx in avance
seaskyways said:
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
Click to expand...
Click to collapse
I can't seem to get the coustom recovery installed, and after some digging i found this :
manubhargav said:
Actually the problem was that custom recovery(twrp here) was not installed at all, that above mentioned error occurs when you try to install SuperSU.zip from stock recovery<3e>.
This happens because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
VL4DST3R said:
I can't seem to get the coustom recovery installed, and after some digging i found this :
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
Click to expand...
Click to collapse
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
---------- Post added at 05:36 AM ---------- Previous post was at 05:32 AM ----------
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
manubhargav said:
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
VL4DST3R said:
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
Click to expand...
Click to collapse
Ah, So the problem you're facing is NOT getting into recovery mode
There are 2 ways to solve the problem, (1st -> flashing recovery.tar again, 2nd-> flashing stock firmware)
First method:
Enter "Download Mode" by holding down "Volume Down"+ "Home" + "Power" button.
Flash recovery.img again and check if it boots into recovery this time.
Sometimes this may not work and you may need to try flashing firmware
Second method:
Download Firmware from here
Open odin in your PC
Enter "Download mode"
Connect the device to PC using USB
Flash the PDA, BL, AP, CSC etc.
Alternatively, You can flash the firmware using SmartSwitch
manubhargav said:
Ah, So the problem you're facing is NOT getting into recovery mode
Click to expand...
Click to collapse
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
VL4DST3R said:
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
Click to expand...
Click to collapse
Which Kernel version are you in? Which TWRP version did you try? Install other custom recoveries? On locked bootloader?
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
VL4DST3R said:
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
Click to expand...
Click to collapse
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
manubhargav said:
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
Click to expand...
Click to collapse
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
VL4DST3R said:
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
Click to expand...
Click to collapse
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
Boot Rom and go into settings/aboutphone/ click build number rapidly.
Developer settings should appear, then go into developers options/ click on "root access" and enable it.
---- now test if its working . however....
2)
If its not working, take yourself back into twrp and flash that supersu beta.
----now test again. However ....
3)
If it doesn't work again .
go back to stock 5.0 rom>>> put twrp on >>> and flash DAT supersu .
now test ya rom again. However.........
4)
If it dont work again ..
go back to stock 4.4 rom>>> put twrp on>>> and flash a random supersu.
now test ya rom again. However.....
5)
if that doesn't work again,
Go back to stock rom through (odin) and restart the process from the top .
btw the "recovery is not seandorid enforcing" is normal . not an error.
GeniusisHere said:
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
---- now test if its working . however....
2)
----now test again. However ....
3)
If it doesn't work again .
now test ya rom again. However.........
4)
If it dont work again ..
now test ya rom again. However.....
5)
if that doesn't work again, .
Click to expand...
Click to collapse
First of all holy **** what an answer... let's SLOW DOWN a bit first, shall we ?
Secondly you lost me from step 1, I don't want CyanogenMod, I want the default Samsung 5.0 with TouchWiz (contrary to popular belief I actually like it).
Also I would really like to know (from someone that actually knows why this happens) why is it reverting to default recovery and how can I stop it from doing so ? manubhargav had an interesting idea, but sadly it doesn't work for everyone (as someone else mentioned on that other post)
So I'm guessing no one knows the answer to my problem considering almost a moth has passed...
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
RL is still there with LP too
Hello , this is my first post and straight away looking for help!
I have a note 3 sm-n9005(not vendor specific), I upgraded it to Lollipop using the normal stock update. After that I wanted to install a custom recovery using a (very probably) erratic image of clockwork mod. After that, I installed clockwork rom manager and using its interface I tried to reboot into recovery mode. Since then, my phone is constantly saying
'RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
SET WARRANTY BIT: RECOVERY'
Right now I am in download mode but I don't know what file to use in Odin to restore the original recovery mode.. Can someone help me?
P.S. I searched the forums and I see a lot of people having a similiar problem but all of them as a consequence of trying to root the phone, which is not my case.
Thanks
I did it! I just used the newest stock firmware from sammobile and did the trick!
Hi, i have a sm-n910f galaxy note 4 that is stuck on boot, the samsung logo appears and get stucked. If i try to boot the recovery i get stucked too whith the logo and the msg that say "recovery booting...". I have tryed to flash stock roms throught odin (with autoreboot unticked, factory reset ticked, with pit and without pit) i have tested samsung firmware rom (N910FXXS1DQC3) and the rom that besoeasy suggested on that thread. If i flash twrp i get stuck on the screen "Recovery: is not seandroid enforcing set warranty bit recovery" and the phone starts vibrate and autoreboot if not stucked. Any suggestions?
Greetings
I had the same problem with TWRP, flash TWRP, untick auto reboot. flash TWRP, remove battery and charger. boot into recovery again. that will work. sorry for my English