Network unlock Galaxy Tab 4 8.0 LTE (SM-T335)? - Galaxy Tab 4 Q&A, Help & Troubleshooting

Does anybody know how to remove a network lock from a galaxy tab 4 8.0?
There's loads of apps on the play store but none seem to work.
It's currently locked to Vodafone UK. It's rooted and model SM-T335 LTE
Cheers

marbelly said:
Does anybody know how to remove a network lock from a galaxy tab 4 8.0?
There's loads of apps on the play store but none seem to work.
It's currently locked to Vodafone UK. It's rooted and model SM-T335 LTE
Cheers
Click to expand...
Click to collapse
And that does not allow Vodafone to download applications from the Play Story? If yes , then try to install the firmware is not from Vodafone .
http://www.sammobile.com/firmwares/database/SM-T335/ .

repey6 said:
And that does not allow Vodafone to download applications from the Play Story? If yes , then try to install the firmware is not from Vodafone .
http://www.sammobile.com/firmwares/database/SM-T335/ .
Click to expand...
Click to collapse
I can install play store apps but they seem to fail to unlock it.
Am I able to flash an unbranded equivalent firm over the branded Vodafone one?

marbelly said:
I can install play store apps but they seem to fail to unlock it.
Am I able to flash an unbranded equivalent firm over the branded Vodafone one?
Click to expand...
Click to collapse
Your native firmware is Vodafone ?

repey6 said:
Your native firmware is Vodafone ?
Click to expand...
Click to collapse
Yes. It is branded with some vodaphone (UK) apps.
Im trying to get the original owner to contact voda, but it's slow.
If i was able to flash a BTU firmware over this, would it remove the sim lock?
Cheers

marbelly said:
Yes. It is branded with some vodaphone (UK) apps.
Im trying to get the original owner to contact voda, but it's slow.
If i was able to flash a BTU firmware over this, would it remove the sim lock?
Cheers
Click to expand...
Click to collapse
I think no . I dont have locked device ever
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
I think that need change settings

repey6 said:
I think no . I dont have locked device ever
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
I think that need change settings
Click to expand...
Click to collapse
I'll try to flash a non branded version to see if it makes non-voda.
I might wait unitl i get an unlock code first tho...
Thanks

marbelly said:
I'll try to flash a non branded version to see if it makes non-voda.
I might wait unitl i get an unlock code first tho...
Thanks
Click to expand...
Click to collapse
So good luck !

marbelly said:
I'll try to flash a non branded version to see if it makes non-voda.
I might wait unitl i get an unlock code first tho...
Thanks
Click to expand...
Click to collapse
If you do need or want the BTU firmware (as opposed to the Vodafone firmware) here is a good download link (android file host). All the other download hosts are some combination of slow, buggy, or unreliable.

repey6 said:
I think no . I dont have locked device ever
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
I think that need change settings
Click to expand...
Click to collapse
thisisapoorusernamechoice said:
If you do need or want the BTU firmware (as opposed to the Vodafone firmware) here is a good download link (android file host). All the other download hosts are some combination of slow, buggy, or unreliable.
Click to expand...
Click to collapse
Thanks for the info. stumbled across that file when I searched for roms. (i take it that you hosted theose files?)
My tab4 is now rid of the voda stuff, but lost root. I used autoroot to get it back (tripped the knox tho)
Just waiting for the SIM unlock code....
Cheers!

Related

SIM Unlock Sprint Galaxy S7 SM-G930P

I am tired of fighting with Sprint to unlock my phone. What options do I have to unlock my SIM on my Sprint Galaxy S7 SM-G930P it is running 6.0.1, G930PVPU4APL6 to use a different carriers SIM?
Find @simunlockremote in telegram he can do remotly have a cost and you will be able to unlock, I Unlocked mine in my country using a z3x box yesterday
melvingutierrez said:
Find @simunlockremote in telegram he can do remotly have a cost and you will be able to unlock, I Unlocked mine in my country using a z3x box yesterday
Click to expand...
Click to collapse
That user has not been active since, "Last Activity: 7th December 2008 08:08 PM"? Maybe you linked it wrong?
Check the capture
He was online yesterday my friend, I gonna unlock with him but one of my costumer have a store where unlock with box and I do here in Dominican republic
melvingutierrez said:
He was online yesterday my friend, I gonna unlock with him but one of my costumer have a store where unlock with box and I do here in Dominican republic
Click to expand...
Click to collapse
The link you sent me takes me to a user named "simunlock" not simunlockremote. Would you please send me the link to that user, I have tried searching for them and did not find them, thank you
Try @simunlockremote typing manually in contact add contact
---------- Post added at 05:53 AM ---------- Previous post was at 05:50 AM ----------
And another thing is in telegram so don't click in the link !!! Just copy and paste in telegram
melvingutierrez said:
Try @simunlockremote typing manually in contact add contact
---------- Post added at 05:53 AM ---------- Previous post was at 05:50 AM ----------
And another thing is in telegram so don't click in the link !!! Just copy and paste in telegram
Click to expand...
Click to collapse
What is Telegram? How do I get to it?
Mr Stewart said:
What is Telegram? How do I get to it?
Click to expand...
Click to collapse
It's a messaging app like WhatsApp, Viber, etc. Download it on Google Play Store or Apple AppStore.
I got in touch with him through Facebook of all places, ty!
He is telling me the phone has to be rooted before he can unlock the SIM.
I have been reading the forum he linked me to to root the S7 but it seems like a lot has gone wrong for many people who have tried to do it.
I'm on pg 5 of the post and will update my next move, as always open to advice, ty!
So just got done rooting and then Unlocking device, root wasn't that bad to do but I am getting a constant notification telling me unauthorized changes were made and to restart the device to undo changes. Now I am supposed to use Odin to flash my current rom G930PVPU4APL6_SPT4APL6_SPR_Sprint_USA_6.0.1.zip and then turn off OTA updates, not sure how to turn OTA off yet or that I want to, due to security updates?
If you unlock you device you just can flash again the same firmware that's you use to root and from this point just upgraded but you can ask to the guy that's unlock if you can flash it... I think that's you don't will have trouble since you are with the official one of sprint in my case I lost the unlock because I pass from sprint room to a U room and after that I back to sprint but if you do the upgrade with the same official firmware I think that all gonna be OK, just ask before...
Yes I flashed back to PL6 build 6.0.1 so all is good! I am back to latest stock ROM, Un-Rooted and SIM Unlocked! I am very HAPPY! I Recommend www.simunlockremote.com to anyone who needs SM-G930P SIM Unlocked. Very good service.
Yes is trusted unlocker i'l will use they service if i block again my phone, i was afraid to to the root proccess
Hey I'm on pl6 as well and want to unlock. So I need to root first? Then unlock? If I flash a u ROM I'll lose the unlock?
brownd7380 said:
Hey I'm on pl6 as well and want to unlock. So I need to root first? Then unlock? If I flash a u ROM I'll lose the unlock?
Click to expand...
Click to collapse
send me a pm i can help you out , and no you wont lose unlock if you flash u firmware , using the u firmware is the best thing to do with an unlocked sprint s7
Im having the same problem with Sprint on my sm-g930p. I know the S7 is a great phone and would like to the phone, as well as my carrier. Which involves an unlock. To my understanding i must root, then unlock ??? Can i get some insight, plz???
---------- Post added at 09:19 PM ---------- Previous post was at 08:53 PM ----------
goonygugle said:
send me a pm i can help you out , and no you wont lose unlock if you flash u firmware , using the u firmware is the best thing to do with an unlocked sprint s7
Click to expand...
Click to collapse
how can this method work for me?
How much was it for the unlock?
I charge whatever you donate
My sprint sm-g930p, when i bought the phone it had an frp lock. I successfully bypassed the frp through bluetooth accessibility and it keeps showing error code 43 everytime i connect it to my computer

SM-G950W + SamPWND

Has anyone been successful with rooting the Canadian variant using SamPWND method?
I've been too busy at work to try myself up to this point but would like to root and use the XAC or CHR CSC firmware for the system.img.ext4.
This has been asked in the SamPWND root post but answers are vague at best.
I am too is eager to root my s8 sm-g950w from Rogers, I don't care about unlocking the bootloader or custom roms or any in-depth customisation, I'm fine with Samsung's skin. I just want root access to use things like "freedom" for in app purchases or "gameguardian" and other apps that benefit from root.
Hope there is a method soon
Same here I am also wondering if there is a root for the Canadian version of the s8. And maybe sometime a boot loader unlock as well
---------- Post added at 03:00 AM ---------- Previous post was at 02:11 AM ----------
So apparently it's the same procedure as the 950u version I'm going to try it on mine soon and I'll let youkbkw if it works or not
It is a sm-g950u. Look at the fine print on the lower back of your phone.
sorry that is what i mean to say sm-g950u but im trying this for the sm-g950w with telus as the carrier
The actual root method (SamPWND) will work but whether I can use the Canadian firmware is what I'm wondering. I don't want to use the 950U or U1.
I'm going to try but it'll be another week before I'm home and can do it.
killswitch_engage said:
The actual root method (SamPWND) will work but whether I can use the Canadian firmware is what I'm wondering. I don't want to use the 950U or U1.
I'm going to try but it'll be another week before I'm home and can do it.
Click to expand...
Click to collapse
I tried. Doesn't work with Telus system IMG.
kmjsmith said:
Same here I am also wondering if there is a root for the Canadian version of the s8. And maybe sometime a boot loader unlock as well
---------- Post added at 03:00 AM ---------- Previous post was at 02:11 AM ----------
So apparently it's the same procedure as the 950u version I'm going to try it on mine soon and I'll let youkbkw if it works or not
Click to expand...
Click to collapse
Did you manage to get the root working?
(Damn dident see the message that it does not work)
Andrewbud said:
I tried. Doesn't work with Telus system IMG.
Click to expand...
Click to collapse
Thanks for letting me know. Just downloaded the Telus firmware and have been thinking about giving it a go. Will probably break down and use a US firmware at some point here. I thought I had made my peace with not having root but seeing that people have Xposed working too is pushing me over the edge to try. Not that keen on 80% battery though. Got spoiled by the battery life on my Pixel XL before it died and find I have to charge my S8 quite a bit more with fully working battery.
Hi all. Yeh the telus image did not work for me. Either. What I ended up doing to still have root is not to flash the image with flash fire. Basicly after I got super su on my phone I stopped
kmjsmith said:
Hi all. Yeh the telus image did not work for me. Either. What I ended up doing to still have root is not to flash the image with flash fire. Basicly after I got super su on my phone I stopped
Click to expand...
Click to collapse
Interesting... Let us know if it works well. In the root thread OP it says that might not be stable or smooth
Yeh it works fairly well. In my oppinion. Only issue is chrome does this weird thing it's hard to explain but it does not crash.
kmjsmith said:
Yeh it works fairly well. In my oppinion. Only issue is chrome does this weird thing it's hard to explain but it does not crash.
Click to expand...
Click to collapse
What kind of issues do you have after rooting?? Everything all good just following the guide?
Yeh I unrooted yesterday because it was to glitchy for me some apps I use like air audio did not work well and a few others. and like I said earlier the telus firmware gave that locked phone error so i kept the modified firmware on it overall I don't recommend if you are given that error and using just the modified firmware. and on top of it the 80% battery was a issue also.
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
Reechings said:
Interesting... Let us know if it works well. In the root thread OP it says that might not be stable or smooth
Click to expand...
Click to collapse
You were right it's glitchy and not very stable
kmjsmith said:
Yeh I unrooted yesterday because it was to glitchy for me some apps I use like air audio did not work well and a few others. and like I said earlier the telus firmware gave that locked phone error so i kept the modified firmware on it overall I don't recommend if you are given that error and using just the modified firmware. and on top of it the 80% battery was a issue also.
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
You were right it's glitchy and not very stable
Click to expand...
Click to collapse
My understanding is that we can use the 950U1 firmware to do the second method where root is more stable but I haven't tried it yet.
So your saying we just need to wait for another method?? Glitchy root isn't worth it. Sounds like there's way too many issues not to mention it being too unstable
thatsup now said:
So your saying we just need to wait for another method?? Glitchy root isn't worth it. Sounds like there's way too many issues not to mention it being too unstable
Click to expand...
Click to collapse
What's wrong with using the U1 firmware for flashing the second part?
It's an unbranded/unbloated version which has all the US and Canada frequencies.
You can dial *#243203855# (or make a shortcut to the activity Preconfig with ShortcutMaster) and select XAA or XAC then select "Do not change QA" which will lock in the CSC settings permanently without switching based on the inserted sim.
As far as waiting for another method, probably not a good idea since the US root took months and many devs to come alive.
If you do Part 2 with the U1 firmware it shouldn't be too glitchy. The 80% battery remains. There's a fix for the green screen issue.
I'm not sure what is lost by switching to US firmware from the Canadian firmware, if anything.
https://forum.xda-developers.com/galaxy-s8+/help/root-canadian-s8-sm-g955w-variants-t3680497
Im with rogers. The only issue i seem to have noticed is. There is u.s. options. In settings. An xac is showing when in download mode rather than rwc like it originally was. Also bixby an samsung translation seems to not be working . I think im going to try to flash the csc file for xac from sammobile an see if that fixes any issues (radio issues)
I dont think it has anything ti do wit csc. Just checked nuff samsung apps. Heres the issue i think with some of the apps from samsung. (Samsung root security)
Root https://imgur.com/gallery/ScXsQ
iAmChump said:
https://forum.xda-developers.com/galaxy-s8+/help/root-canadian-s8-sm-g955w-variants-t3680497
Im with rogers. The only issue i seem to have noticed is. There is u.s. options. In settings. An xac is showing when in download mode rather than rwc like it originally was. Also bixby an samsung translation seems to not be working . I think im going to try to flash the csc file for xac from sammobile an see if that fixes any issues (radio issues)
I dont think it has anything ti do wit csc. Just checked nuff samsung apps. Heres the issue i think with some of the apps from samsung. (Samsung root security)
Root https://imgur.com/gallery/ScXsQ
Click to expand...
Click to collapse
Hi
Getting luck with rooting Rogers s8 ??? (G950w) i try getting info but theres no clean explication for us

Moto E4 XT1764 [perry] need stock ROM

I accidentally deleted it with TWRP and I can't find it anywere
https://firmware.center/firmware/Mot...to E4/Stock/
I've already searched there, but how do I know which is the correct for my variant? it looks like there are a lot of versions for Moto E4 and I just can't find specifically the XT1764
Moderi said:
I've already searched there, but how do I know which is the correct for my variant? it looks like there are a lot of versions for Moto E4 and I just can't find specifically the XT1764
Click to expand...
Click to collapse
check your device build.prop for more info.
Francesco Franz said:
check your device build.prop for more info.
Click to expand...
Click to collapse
How do I do it from fastboot? It can't boot, it starts a bootloop every tine I try to start it normally
Moderi said:
How do I do it from fastboot? It can't boot, it starts a bootloop every tine I try to start it normally
Click to expand...
Click to collapse
what is the SKU version of your device ?
Francesco Franz said:
what is the SKU version of your device ?
Click to expand...
Click to collapse
XT1764
SPR for boost, virgin, and Sprint.
Your carrier is the other thing you need to think about.
---------- Post added at 11:15 AM ---------- Previous post was at 11:15 AM ----------
Moderi said:
How do I do it from fastboot? It can't boot, it starts a bootloop every tine I try to start it normally
Click to expand...
Click to collapse
Vol up and power
SykkNyzz said:
SPR for boost, virgin, and Sprint.
Your carrier is the other thing you need to think about.
---------- Post added at 11:15 AM ---------- Previous post was at 11:15 AM ----------
Vol up and power
Click to expand...
Click to collapse
I got the phone from AT&T so I guess it has its carrier, I just want the stock rom to reflash it
Moderi said:
I got the phone from AT&T so I guess it has its carrier, I just want the stock rom to reflash it
Click to expand...
Click to collapse
If you can boot to the bootloader, you need to flash the firmware with adb/fastboot. If you can't boot to the bootloader, you may have a brick.
amarc78 said:
If you can boot to the bootloader, you need to flash the firmware with adb/fastboot. If you can't boot to the bootloader, you may have a brick.
Click to expand...
Click to collapse
I can, I just need the firmware, I cant find it anywere
Moderi said:
I can, I just need the firmware, I cant find it anywere
Click to expand...
Click to collapse
I don't see it anywhere, I guess you'll just have to wait until it's available.
Sent from my Moto E (4) using XDA Labs
Isn't the "Retail" version the one on the unlocked E4's?
The retail unlocked model is XT1768. Unless someone knows otherwise, I think there are really only two US versions (well and the Verizon bootloader version) - one with a fingerprint reader and one without. I would go ahead and try the retail firmware, but maybe only flash the system partition to be safe.
https://androidfilehost.com/?w=files&flid=195327
It is officially here as well
---------- Post added at 11:36 AM ---------- Previous post was at 11:26 AM ----------
I guess you already figured that yours is mediatek
https://www.mobosdata.com/motorola-moto-e4-xt1764
SykkNyzz said:
https://androidfilehost.com/?w=files&flid=195327
It is officially here as well
---------- Post added at 11:36 AM ---------- Previous post was at 11:26 AM ----------
I guess you already figured that yours is mediatek
https://www.mobosdata.com/motorola-moto-e4-xt1764
Click to expand...
Click to collapse
which one should I use? I've tried with some but none of them seem to be for xt1764
Moderi said:
which one should I use? I've tried with some but none of them seem to be for xt1764
Click to expand...
Click to collapse
I have one that works, send me inbox, since it does not let me publish links :good:
I have sprint xt1766 and trying to flash retail firmaware but nothing works, does anyone have working rom without bloatware that can be flashed on sprint's xt1766? Thank you
oiwearsprada said:
I have one that works, send me inbox, since it does not let me publish links :good:
Click to expand...
Click to collapse
yup, this ( https://www.needrom.com/download/moto-e4-xt1762-nma26-42-75-row-official-rom/ ) rom worked perfectly! however, it has bloatware, but with root and a little of creativity you can get rid of it, thank you very much!!!
help
oiwearsprada said:
I have one that works, send me inbox, since it does not let me publish links :good:
Click to expand...
Click to collapse
i need that rom too what can we do about this?

unlocked S8 [G950U] after Android update can't connect to 4G or 3G network

Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help
idrissbravo said:
Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help
Click to expand...
Click to collapse
can you screenshot your "about phone" screen and post it here? Please be sure to block out your sensitive info like phone number, IMEI, ESN etc etc
youdoofus said:
can you screenshot your "about phone" screen and post it here? Please be sure to block out your sensitive info like phone number, IMEI, ESN etc etc
Click to expand...
Click to collapse
i don't know from where i post photos here
And links
idrissbravo said:
i don't know from where i post photos here
And links
Click to expand...
Click to collapse
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
idrissbravo said:
Hi
I bought an S8 G950U unlocked with Android 8 , it was working perfect as normal connecting to 4G(LTE) and 3G in Algeria.
The day that i upgrade it to android 9 , i wasn't able to connect to 4G and to use mobile hotspot.
I brought my phone to a repairer he flashed my phone and it stucks in "Galaxy S8" screen and loops.
i used odin to flash ADP with firmware (csc: CHA) , it enters to android and it reads the sim in 2G but i can,t reach neither 4G nor 3G.
i think he erased the NAND because the serial number and model number are not true.
and i've other problem, the dial codes like *#06# or *#0011# doesn't work.
idon't know what i should i do. please Help
Click to expand...
Click to collapse
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin
TheMadScientist said:
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin
Click to expand...
Click to collapse
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks
TheMadScientist said:
You can't post pics or links yet. Either 10 or 25 posts.
I always tell people first check imei. Make sure the device isn't black listed. If that's good. We need to make sure it's truly sim unlocked. If so. Then maybe need to flash your carriers csc
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
I don't know how to flash the csc from other countries. Maybe try flashing the newest u1 bit 6 firmware. In the latest Odin
Click to expand...
Click to collapse
you dont know how to flash other countries CSC's?
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
idrissbravo said:
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks
Click to expand...
Click to collapse
im running the U1 version of the firmware for my phone and its been perfect. The U1 is the unbranded version, so no dumb boot animation anymore etc etc
youdoofus said:
you dont know how to flash other countries CSC's?
Click to expand...
Click to collapse
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
I have no boot animation but there is sprint OMADM notification now
youdoofus said:
you dont know how to flash other countries CSC's?
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
im running the U1 version of the firmware for my phone and its been perfect. The U1 is the unbranded version, so no dumb boot animation anymore etc etc
Click to expand...
Click to collapse
Yea since I'm in us I don't habe to mess with changing csc never had to. That's what it sounds like if he updated. It replaced the csc to. And don't know what to do with his sim. Unless his apn is gone and needs 're input
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
idrissbravo said:
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
Click to expand...
Click to collapse
I've seen guys flash other country csc files. I just don't know the method as I believe Odin will fail.
TheMadScientist said:
Yea since I'm in us I don't habe to mess with changing csc never had to. That's what it sounds like if he updated. It replaced the csc to. And don't know what to do with his sim. Unless his apn is gone and needs 're input
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
I've seen guys flash other country csc files. I just don't know the method as I believe Odin will fail.
Click to expand...
Click to collapse
since you would be technically changing carrier information with the Odin flash, yes, it should fail in stock Odin. But it will work in modded Odin.
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
idrissbravo said:
after flashing many csc (there is no for my country for 950U) it stucks in bootloop
I have no boot animation but there is sprint OMADM notification now
Click to expand...
Click to collapse
factory reset the phone.
idrissbravo said:
i've checked my phone is "clean status" is not black listed it was working normally.
G950U1 ? U1 bit 6 firmware i will search to try thanks
Click to expand...
Click to collapse
youdoofus said:
since you would be technically changing carrier information with the Odin flash, yes, it should fail in stock Odin. But it will work in modded Odin.
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
factory reset the phone.
Click to expand...
Click to collapse
i downloaded the U1 6 firmware csc:xaa . I used the modded odin (odin 3b) i ve made a factory reset i tried to reflash csc the modded odin fails
Still bootloop
idrissbravo said:
i downloaded the U1 6 firmware csc:xaa . I used the modded odin (odin 3b) i ve made a factory reset i tried to reflash csc the modded odin fails
Still bootloop
Click to expand...
Click to collapse
try another cable, reboot your machine, get a new fresh download (dont go directly to sammobile.cim to get it, get the Frija tool or Samfirm, they take literally 1/5th the time to download the firmware sets), try a different computer, uninstall the drivers and let windows reinstall them when you connect your phone, is ADB installed system wide? if not, there is a small tool to do it for you
youdoofus said:
try another cable, reboot your machine, get a new fresh download (dont go directly to sammobile.cim to get it, get the Frija tool or Samfirm, they take literally 1/5th the time to download the firmware sets), try a different computer, uninstall the drivers and let windows reinstall them when you connect your phone, is ADB installed system wide? if not, there is a small tool to do it for you
Click to expand...
Click to collapse
NO THING of those done . i think erase NAND and re-input SN (that i didn't found) , IMEI and information (prod name, device type...) the repairer made a catastrophe. i installed phone info i can't imagin what i found all information are false.
can i set to zero and re-inter the information ?
idrissbravo said:
NO THING of those done . i think erase NAND and re-input SN (that i didn't found) , IMEI and information (prod name, device type...) the repairer made a catastrophe. i installed phone info i can't imagin what i found all information are false.
can i set to zero and re-inter the information ?
Click to expand...
Click to collapse
IMEI changing and that kind of stuff is sketchy. Can they reflash it for you?
youdoofus said:
IMEI changing and that kind of stuff is sketchy. Can they reflash it for you?
Click to expand...
Click to collapse
how those "they" we haven't samsung service , we have just some stores that sell phones and they can "repair" them
they says to me that they don't knows about american samsung (something that i love because of snapdragon)
thank you for all your effort to help me
Nand erase does not wipe IMEI.
And rewriting isn't discussed on XDA
idrissbravo said:
how those "they" we haven't samsung service , we have just some stores that sell phones and they can "repair" them
they says to me that they don't knows about american samsung (something that i love because of snapdragon)
thank you for all your effort to help me
Click to expand...
Click to collapse
the "they" is the repair shop you had work on it. its hard to know how to un-do what they did if we dont know what they did
i also cant imagine a repair shop that can work on Exynos S9s competently but not snapdragon ones

Sim unlock s10+ from sprint to metropcs

Good morning. I was just curious, is there anyway to unlock my phone myself using ODIN?
If so, is there a link to the correct files I would need?
TIA
G975USQS2SBSIA is the pda version
anyone?
NO not compatible
What do you mean its not compatible?
ANGMORRIS said:
anyone?
Click to expand...
Click to collapse
You need to have Sprint unlock it first and they require 50 days with service on that device and no outstanding bill.
Then you can put in your MetroPCS sim and call Metro and they will add the IMEI and it will work fine, or if you want, download the unlocked file and flash with ODIN to remove the bloatware.
jimd144 said:
You need to have Sprint unlock it first and they require 50 days with service on that device and no outstanding bill.
Then you can put in your MetroPCS sim and call Metro and they will add the IMEI and it will work fine, or if you want, download the unlocked file and flash with ODIN to remove the bloatware.
Click to expand...
Click to collapse
Where can i find the file
https://androidfilehost.com/?w=file...191a2f4a12730a065090a256ed328229706d53b8f97ed
You also need ODIN patched and the Samsung drivers.
This will only work after you have Sprint unlock the sim
jimd144 said:
https://androidfilehost.com/?w=file...191a2f4a12730a065090a256ed328229706d53b8f97ed
You also need ODIN patched and the Samsung drivers.
This will only work after you have Sprint unlock the sim
Click to expand...
Click to collapse
Would you possible pm me and walk me through this ? I would really appreciate it
ANGMORRIS said:
Would you possible pm me and walk me through this ? I would really appreciate it
Click to expand...
Click to collapse
https://www.reddit.com/r/galaxys10/comments/b4udmb/unlocked_s10_plus_firmware_flash/
I have to go do DoorDash so no time.
https://piunikaweb.com/2019/03/11/samsung-galaxy-s10-how-to-manually-unbrand-update-us-models/
You will need to search Google on how to unlock your S10.
It's easy. Just read and breathe.
jimd144 said:
https://www.reddit.com/r/galaxys10/comments/b4udmb/unlocked_s10_plus_firmware_flash/
I have to go do DoorDash so no time.
https://piunikaweb.com/2019/03/11/samsung-galaxy-s10-how-to-manually-unbrand-update-us-models/
You will need to search Google on how to unlock your S10.
It's easy. Just read and breathe.
Click to expand...
Click to collapse
Doing this carrier unlock it, correct ?
ANGMORRIS said:
Doing this carrier unlock it, correct ?
Click to expand...
Click to collapse
It will let you use any carrier as long as the SIM is unlocked.
If the sim is locked by Sprint you need them to unlock it first.
---------- Post added at 10:59 PM ---------- Previous post was at 10:58 PM ----------
The carrier must unlock it first. Then this allows other carriers to work. But if Sprint has it locked you are SOL.
jimd144 said:
It will let you use any carrier as long as the SIM is unlocked.
If the sim is locked by Sprint you need them to unlock it first.
---------- Post added at 10:59 PM ---------- Previous post was at 10:58 PM ----------
The carrier must unlock it first. Then this allows other carriers to work. But if Sprint has it locked you are SOL.
Click to expand...
Click to collapse
my phone is currently stuck on activate your device

Categories

Resources