Database Users

[Q] Whiped OS, cant get back.

Hey everyone,
I got this problem, today i wanted to whipe my phone... But i failed and also whiped the OS... So i was stuck on samsung logo.. After i got into download mode i tried to flash the standard unbranded S4 called:I9505XXUFNC4_I9505PHNFNC1_PHN
After i tried to flash that as PDA with ODIN v3.04, it says it failed..
What to do now?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505PHNFNC1_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I used the official cable ...
Any options?
EDIT:
Now when i boot the phone it only says:
Firmware upgrade encountered an issue.Please select recoverymode in Kies & try again.

Tunestwo said:
Hey everyone,
I got this problem, today i wanted to whipe my phone... But i failed and also whiped the OS... So i was stuck on samsung logo.. After i got into download mode i tried to flash the standard unbranded S4 called:I9505XXUFNC4_I9505PHNFNC1_PHN
After i tried to flash that as PDA with ODIN v3.04, it says it failed..
What to do now?
I used the official cable ...
Any options?
EDIT:
Now when i boot the phone it only says:
Firmware upgrade encountered an issue.Please select recoverymode in Kies & try again.
Click to expand...
Click to collapse
just repeat procedure, change odin version, change usb port, change usb cable....

samersh72 said:
just repeat procedure, change odin version, change usb port, change usb cable....
Click to expand...
Click to collapse
no effect so far.... T.T

Try it on another pc
Or
Download another firmware

I had the same issue yesterday phone stoipped working got andropid.phone errors and phone would not make or take calls when go to dialer kept crashing and black screen tried wiping/factory reset and still had same issue on djembey stock pre root
I decided to then download stock EE firmware latest 4.4.2 this then failed and phone after this would not even boot up only thing I could manage to do now was to put into download mode would no longer even go into recovery mode either
I tried flashing about 4times and ODIN kept on failing tried with Odin 1.85, 3.04 3.07
FED up I read somewhere to try diff cable ( like that will make a diff I thought)
YESSSSS it flashed and now I have a working phone

After using, diffrent pc's, diffrent cables, and diffrent usb ports...
it worked... Jezus i love you guys!

[Q] Bootloop that can't be fixed, have tried every image

I have looked and tried and still can't fix my bootloop.
I was on Factory 4.3 rooted with towel and had OTA blocked. I need to update to 4.4 for a bluetooth device I have so set superSU to save root and removed the OTA block, although the updates would fail over OTA. I then downloaded the 4.4 NC4 image and used odin to image the phone. No I didn't do any of the recommend pre-imaging because I failed to look up the procedure as I had done other phones in the past.
I am now in a bootloop where it boots into the setup wizard, locks up after 2-3secs and reboot. Over and over. The phone still shows custom after a factory image flash. i've tried every recover from softbrick option I could find and nothing. It boots into setup, freezes, and reboots. Even went as far as erase nand because nothing else worked and the same thing happens.
These images all give me an auth failed: MJE, MI9, MJ7, MJE, NC2. The NC4 image will let me flash, but still results in a bootloop. Again, the lock still shows custom.
Any chance in saving this thing?

I went thru this very same thing just the other day. Go to my post. I posted the link for all the downloads on it. You'll have to Odin flash a complete stock 4.4 Ota. Then you can root with towel root and go from there. Here is the link.
http://forum.xda-developers.com/showthread.php?t=2914890
---------- Post added at 05:38 PM ---------- Previous post was at 05:36 PM ----------
Here is the link for all carriers stock files.
http://galaxynote3root.com/galaxy-note-3-stock-firmware/

i think I tried every image, although i'm more then willing to try again. I'll use the link you provided and see what happens.
Thanks for the reply.

Same thing using the image link provided, still in a bootloop, still showing custom/unlocked.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> cache.img.ext4
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

pretty desperate at this point so i decided to try a flash the nc2kernel ontop of the nc4 as described in some rom hack, i figured what do i have to lose. it did flash, although never made it passed the vzw screen during the boot. i flashed the factory nc4 image to get it back and was surprised to see a android running an upgrade, i was excited for about 3mins until it went right back to the boot loop again with the unlock/custom screen. damn.
still looking for help if anyone has any ideas i'll try them tomorrow.

Calzoniee said:
pretty desperate at this point so i decided to try a flash the nc2kernel ontop of the nc4 as described in some rom hack, i figured what do i have to lose. it did flash, although never made it passed the vzw screen during the boot. i flashed the factory nc4 image to get it back and was surprised to see a android running an upgrade, i was excited for about 3mins until it went right back to the boot loop again with the unlock/custom screen. damn.
still looking for help if anyone has any ideas i'll try them tomorrow.
Click to expand...
Click to collapse
Make sure you have the right PIT file or use KIES.
Sent from my Note 3 via Tapatalk

donc113 said:
Make sure you have the right PIT file or use KIES.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. Kies comes back with "phone not supported", the PIT file I'm using is HLTE_USA_VZW_32G.pit which I believe is correct.
I've tried the verizon recovery assistant as well; it goes through the whole process tell me it's repaired and then just go right back into the bootloop, the lock still showing unlocked/custom.

I tired another computer and then another cable as suggested in another thread, still stuck in bootloop.

Calzoniee said:
I tired another computer and then another cable as suggested in another thread, still stuck in bootloop.
Click to expand...
Click to collapse
Have you pulled battery booted into stock recovery and done a factory reset yet?

RomsWell said:
Have you pulled battery booted into stock recovery and done a factory reset yet?
Click to expand...
Click to collapse
Thanks for the reply, yes I have. I have done all the steps to repair a softroot and to restore to factory. The factory restore steps were not tried until the phone was softbricked and stuck in the bootloop.
I called Samsung, they recommend I take the phone to the Best Buy Samsung repair center. I guess I'll try that tomorrow if nothing else works today.

Cannot flash Firmware with Odin

Code:
Hi, I have a serious problem with my Note 4 (SM-N910F).
Since the phone where lagging a lot from a few days, yesterday I choose to do a restore to factory condition, but after that it begun to bootloot.
So I flashed the latest 5.11 firmware available (this from Sammobile for Italy.
As soon as I did, I thought that all my problems were gone, but no. After the firmware, I wanted to get root, so after a quick search on Internet, I choose to get this kernel.
But after the flash of the kernel, I begun to have A LOT of problem. So I decided to flash again only the firmware.
Today I tried again to flash the TWRP recovery to flash the kernel .zip to get the root, but as soon as I did it, the phone didn't go beyong the Samsung logo.
I tried to take these steps: firmware-recovery-root, but after a while, ODIN gave me the error of "PIT binary missing" (or similar).
So, I downloaded a .PIT file for the 5.1.1 (I don't remember where) and I reflashed the firmware with the .PIT file and I didn't got any errors.
After I checked that there were no problems, I tried again to install that kernel.
And I tried again, and again, with different 5.1.1 firmwares.
A thing that I think it's important, it's that I noticed that sometimes while powering on the phone, it went automatically to Download Mode, with a message saying that it couldn't boot in "normal mode" and "MMC read error".
Also I noticed that everytime a powered off, or I rebooted the phone, I had to take off the battery in order to turn on again the phone. It seems like the phone never really turns off.
Now, the phone doesn't boot, the recovery isn't working, and the only thing I have is the download mode.
I tried on 2 pcs, with 2 usb cables, with 2 ODIN versions (3.09 and 3.10.6) to flash a couple of 5.1.1 firmware with and without the .PIT file.
Every time I start the flash on ODIN, while flashing the SYSTEM.img, the flashing stops and on the phone I get this message "ODIN: flash write failure".
I don't really know what to do, unless took it to a warranty center. I think that this problem could be caused by a faulty EMMC, or a brick caused by me.
PS: this is the log from ODIN
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910FXXU1COH4_N910FITV1COH1_N910FXXU1COH4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005>[COLOR="Red"] FAIL! (Write)[/COLOR]
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
UPDATE:
I successfully installed the TWRP recovery (twrp-2.8.6.0-trltexx.img.tar) with ODIN, so I wiped all the partitions but one: SYSTEM. The error is "E:Unable to mount '/system'.
At this point I think I messed up with the partitions.
UPDATE2:
I installed the CWM PhilZ, and with that I formatted the /system partition.
So I tried to re-flash the firmware with no success, but I tried again with the .PIT file and it succeeded!
Do you think I should retry to root it?
UPDATE 3:
So, after the first setup (google account, samsung account, time, etc.) I turned the phone off to insert my SIM card.
But as soon as the smartphone turned off, it powered on itself again in Download mode, showing me this error:
Could not do normal boot.
ddi : mmc_read failed
I think that maybe, there's a problem with the eMMC

Hi there
Do you want to flash the firmware?
i have s6 edge and when i choose file(in odin) for (PA) it falis so i tried for (CSC) and it worked.

Exactly the same thing happened to me. I have not been able to fin any solution to this topic. Every new you report will be very appreciated. If I find any solution y will post it here.

landerhazard said:
Exactly the same thing happened to me. I have not been able to fin any solution to this topic. Every new you report will be very appreciated. If I find any solution y will post it here.
Click to expand...
Click to collapse
i had a simialar problem with odin but my problem was that the adb wasnt successful i had to do it twice before it said successful then when i ran odin it worked not sure if this will help but i was stuck for days with the odin fail it was frustrating but good luck hope you find a solution

(Help)Samsung N9005 Stuck on Samsung Logo with the led blinking

Hi guys, I have an issue with my phone and I´ll be glad if you guys can help me! the issue is after I install stock rom from sammobile (TPH from Portugal version 5.0 Lollipop my device is unlocked) by odin I stay stuck on samsung logo with animation logo and led blinking. The flash ran without problems getting pass message on green in odin screen, so the phone boots up shows me a model after that the samsung logo with animation and stuck there. when I see that the phone dont boot and stuck on there, I try to enter on recorevy mode and I can't go inside to make a wipes, the phone just reboot again. So I try to a download mode to make reflash of rom and I cant enter too. I dont know what to do right now. When I plug the phone on pc MTP cant install but in odin its reconized the phone. CAN ANYONE HELP ITS MY DAYLY PHONE
thanks in advance
the log of odin is this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOK6_N9005OXXGBOJ2_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> modem.bin
<ID:0/008> NON-HLOS.bin
<ID:0/008> recovery.img
<ID:0/008> rpm.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> sdi.mbn
<ID:0/008> system.img.ext4
<ID:0/008> tz.mbn
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Added!!
<ID:0/011> Removed!!

Mobita said:
Hi guys, I have an issue with my phone and I´ll be glad if you guys can help me! the issue is after I install stock rom from sammobile (TPH from Portugal version 5.0 Lollipop my device is unlocked) by odin I stay stuck on samsung logo with animation logo and led blinking. The flash ran without problems getting pass message on green in odin screen, so the phone boots up shows me a model after that the samsung logo with animation and stuck there. when I see that the phone dont boot and stuck on there, I try to enter on recorevy mode and I can't go inside to make a wipes, the phone just reboot again. So I try to a download mode to make reflash of rom and I cant enter too. I dont know what to do right now. When I plug the phone on pc MTP cant install but in odin its reconized the phone. CAN ANYONE HELP ITS MY DAYLY PHONE
thanks in advance
the log of odin is this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOK6_N9005OXXGBOJ2_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> modem.bin
<ID:0/008> NON-HLOS.bin
<ID:0/008> recovery.img
<ID:0/008> rpm.mbn
<ID:0/008> sbl1.mbn
<ID:0/008> sdi.mbn
<ID:0/008> system.img.ext4
<ID:0/008> tz.mbn
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Added!!
<ID:0/011> Removed!!
Click to expand...
Click to collapse
Try unplug battery and let it boot to screen after 5minutes.
If still same try boot to download mode and reflash by untick the autorestart.

Yumiko87 said:
Try unplug battery and let it boot to screen after 5minutes.
If still same try boot to download mode and reflash by untick the autorestart.
Click to expand...
Click to collapse
try to boot the phone without batery?

Mobita said:
try to boot the phone without batery?
Click to expand...
Click to collapse
still every time the same thing samsung animation logo and blue led blinking. I do a combination and the phone boots normaly until logo. once it arrive at logo just keeping with animation and led noting else appears
any idea?

Mobita said:
still every time the same thing samsung animation logo and blue led blinking. I do a combination and the phone boots normaly until logo. once it arrive at logo just keeping with animation and led noting else appears
any idea?
Click to expand...
Click to collapse
What I mean it's make sure the phone is in warm condition before you flash again via Odin. Then in Odin v3.09 untick the autorestart for the process. And after that wait until the green passed come out then only plug out battery and cable then wait for 1 min plugin back and wait at least 30min and report.
The longest bootloop will be 30min to wait.

Boot into stock recovery, perform a factory reset, reboot.

mine Note N9005 take 20 to 25 minute on first boot after flashing.

Munawar Mehmood said:
mine Note N9005 take 20 to 25 minute on first boot after flashing.
Click to expand...
Click to collapse
After flashing what ??

Yumiko87 said:
What I mean it's make sure the phone is in warm condition before you flash again via Odin. Then in Odin v3.09 untick the autorestart for the process. And after that wait until the green passed come out then only plug out battery and cable then wait for 1 min plugin back and wait at least 30min and report.
The longest bootloop will be 30min to wait.
Click to expand...
Click to collapse
So I have to put the phone in hot state??!how I do that? I made a flash with odin 3.07. but if I cant enter on dowload mode how can I flash thing with odin?

audit13 said:
Boot into stock recovery, perform a factory reset, reboot.
Click to expand...
Click to collapse
I cant enter on recovery

Mobita said:
I cant enter on recovery
Click to expand...
Click to collapse
Download a new stock rom and flash via Odin .make sure you have a N9005.
Boot phone to download mode and read the phone model .
Dont bother about warm thats nonsense .

JJEgan said:
Download a new stock rom and flash via Odin .make sure you have a N9005.
Boot phone to download mode and read the phone model .
Dont bother about warm thats nonsense .
Click to expand...
Click to collapse
thanks for reply mate but I cant enter on download mode too like I said before

You have NO Recovery and No Download mode then you require a service centre .

JJEgan said:
You have NO Recovery and No Download mode then you require a service centre .
Click to expand...
Click to collapse
is no way to get download mode or recovery functional by pc? my phone is reconized by odin when I plug it

Mobita said:
is no way to get download mode or recovery functional by pc? my phone is reconized by odin when I plug it
Click to expand...
Click to collapse
It should give you work on download mode even you have wrong flash on it. Try press volume down+home+power for several times to make it force boot to download mode. Without that mode you can't do anything .

Yumiko87 said:
It should give you work on download mode even you have wrong flash on it. Try press volume down+home+power for several times to make it force boot to download mode. Without that mode you can't do anything .
Click to expand...
Click to collapse
is another way to get download mode? I cant do it like you said

JJEgan said:
After flashing what ??
Click to expand...
Click to collapse
After flashing rom it take 20 to 25 minute to complete boot.
As your mentioned you have not recovery or download mode. try this method.
Install keis on your pc and connect your mobile. kiew will detect your phone.
http://www.samsung.com/us/support/owners/app/kies
In kies you will get option to upgrade or reinstall the firmware. reinstall your firmware through kies. it will download appropriate firmware and install it on your phone. Hope it will make your phone back to normal.

Munawar Mehmood said:
After flashing rom it take 20 to 25 minute to complete boot.
As your mentioned you have not recovery or download mode. try this method.
Install keis on your pc and connect your mobile. kiew will detect your phone.
http://www.samsung.com/us/support/owners/app/kies
In kies you will get option to upgrade or reinstall the firmware. reinstall your firmware through kies. it will download appropriate firmware and install it on your phone. Hope it will make your phone back to normal.
Click to expand...
Click to collapse
my kies do not recognize the phone :s

Standard replies .
Swap usb port on PC.
Use Samsung USB cable .
Use another PC .
More under kies fails search .
Sent from my SM-N930F using XDA-Developers mobile app

JJEgan said:
Standard replies .
Swap usb port on PC.
Use Samsung USB cable .
Use another PC .
More under kies fails search .
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
I cant try it in other because I dont have another one.. I swap usb port I use samsung usb cable and nothing :crying: :crying: :crying:

Device blocked by FRP Lock

Hello guys,
I know sounds kinda stupid but this is what i've done:
- Installed TWRP and flashed LineageOS 14.1 on Samsung Galaxy J3 SM-J320FN . All fine all good
- After booting into the system i disabled the setting for developer mode and the party started :\
After the first shut down of the phone the device will not boot any more, it says in the top corner "Custom binary blocked by FRP lock"
Tried to enter in Download mode to try flash again TWRP or custom ROM (named J320FNXXU0APH1_J320FNOXX0APH1_J320FNXXU0APH1_HOME.tar.md5) but the operation fails and on the phone's display appears "Custom Binary(RECOVERY) Blocked by FRP Lock
Tried also fix the problem with Samsung Kies but without success. In the latest version of the app they removed menu tools>Firmware upgrade and initialization and with previous versions after typing the model name of the phone appears a message that say "Please check the model name and enter it" .
Is there a way make the phone boot again normally ?
Odin's Log
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

Exactly the same problem here. Did you find a solution ??

PsychoticMind said:
Exactly the same problem here. Did you find a solution ??
Click to expand...
Click to collapse
Find a way to solve the problem. Probably not the best one but it works
1. I flashed the Stock ROM of the phone using Odin . Because i'm a new member i cannot post an outside link so far. But you can search for your ROM on the site updatodotcom and download it from that website
2. After the ROM is flashed still i had a problem. Phone turns on, and at the welcome screen when the phone language should be chosen it enters in a reboot loop. I solved this by wiping phone data (press volume up + menu + power on to enter in that menu)
After those two steps the phone will boot normally . Al least mine booted

FinuCCi86 said:
Find a way to solve the problem. Probably not the best one but it works
1. I flashed the Stock ROM of the phone using Odin . Because i'm a new member i cannot post an outside link so far. But you can search for your ROM on the site updatodotcom and download it from that website
2. After the ROM is flashed still i had a problem. Phone turns on, and at the welcome screen when the phone language should be chosen it enters in a reboot loop. I solved this by wiping phone data (press volume up + menu + power on to enter in that menu)
After those two steps the phone will boot normally . Al least mine booted
Click to expand...
Click to collapse
Lifesaver, I ended up reflashing stock rom and got stuck in that awful bootloop. Was gonna try flashing GAPPS using sideload but this has worked a treat nice one
Thank you