Hello everyone, I've been playing with some of the available roms for the E7 here for quite some time. I would like to know, how can I put the E7 into diagnostic mode?
I tried searching but there wasn't anything available that I could find.
Hi, i have the same question, i'm waiting the phone to charge a little meanwhile...
I just tried. Looks like all you have to do is turn off the phone and then it will be detected as if its in diagnostic mode. Went as far as using the flash tool and it did work.
Related
Hello,
I have problem with my SGS I9000. When I am trying to turn on my phone, I can see only SAMSUNG boot screen blinking again and again. I am NOT able to run recovery mode or download mode (it's strange for me). And what is strange, when phone is turned off and I will plug in battery charger, there is only "spinning" circle.
I know there are threads regarding this problem but other users were able to run download mode, but I am NOT :-(
Thanks to everyone for any answers.
skipper_nb said:
Hello,
I have problem with my SGS I9000. When I am trying to turn on my phone, I can see only SAMSUNG boot screen blinking again and again. I am NOT able to run recovery mode or download mode (it's strange for me). And what is strange, when phone is turned off and I will plug in battery charger, there is only "spinning" circle.
I know there are threads regarding this problem but other users were able to run download mode, but I am NOT :-(
Thanks to everyone for any answers.
Click to expand...
Click to collapse
Have you been able to get into download mode previously? If not it's probably not enabled.
The best approach is probably to make/buy a USB jig. Check ebay.
I was able to run download mode before. Yes, thank you, I already found out how to create jig and I made it.
So pls close this post and sorry.
Hello developers,
I am not really new here, but more a reader than a writer. But this time I need your help.
I have tried to flash a Chinese I9500 clone (mtk6589), with an chinese recovery and without a download mode.
After i tried with MtkDroidtools, neither have a download mode, recovery mode or rom.
After turning on the phone it keeps rebooting after showing the I9500 logo. Even if i connect it to the computer.
The real problem is: I can't make a stable connection with the computer to flash a new image.
Is there another option or did i really bricked this one?
skiawolf said:
Hello developers,
I am not really new here, but more a reader than a writer. But this time I need your help.
I have tried to flash a Chinese I9500 clone (mtk6589), with an chinese recovery and without a download mode.
After i tried with MtkDroidtools, neither have a download mode, recovery mode or rom.
After turning on the phone it keeps rebooting after showing the I9500 logo. Even if i connect it to the computer.
The real problem is: I can't make a stable connection with the computer to flash a new image.
Is there another option or did i really bricked this one?
Click to expand...
Click to collapse
only thing i could suggest is try finding , the software designed for flashing that device, maybe try contacting the actual manufacturer.
you may be waiting some time as clones arent supported here on xda
andy1weir said:
only thing i could suggest is try finding , the software designed for flashing that device, maybe try contacting the actual manufacturer.
you may be waiting some time as clones arent supported here on xda
Click to expand...
Click to collapse
Thnx for your reply, but even if i have the right software. The phone keeps restarting,
so i have to stop the rebooting, otherwise the computer won't recognize the phone.
You get what you pay for.
#Fixed
This will sound implausible but:
I deleted the battery, installed the last usb driver en used the hard reset combination. So the rebooting stopped.
after that, I followed the tutorial called "How To use SP Flash Tool For China Mobile Phones - HDC Legend S4 [HD]" (on youtube) and its done.
I had this problem for months and now this solution finally worked for me.
Hello guys,
I searched on the net but didn't find any answers. I'll try to be clear : Today I flashed my international G2 with the LG flash tool. Everything worked fine. Then, when I tried to put a new rom on the phone (by using a custom recovery), I made a mistake and soft-bricked the LG. Now I can still access to the download mode, but the tool doesn't work anymore when i plug the phone in download mode. I tried to reinstall the drivers, but my computer doesn't seem to see anything...
What's wrong ?
Precision : At each time, my phone was rooted, but this morning when I succeed, nothing was written in the download mode and now, I see the word "rooted" in the bottom of the screen.
Hi guys,
I have a samsung galaxy s4 with no imei label on the battery place and the screen is smashed so no way to activate the debug mode or the diag mode
The only thing I did so far to be able to read the IMEI is to boot the phone in Download mode but CDMA tools are not working as the phone is not in diag mode.
Anybody knows how can I read the IMEI of this phone? I checked this post but even getting into ADB it´s complicated as it never boots on the Recovery mode.
Thanks in advance.
Yedi
yedi1002 said:
Hi guys,
I have a samsung galaxy s4 with no imei label on the battery place and the screen is smashed so no way to activate the debug mode or the diag mode
The only thing I did so far to be able to read the IMEI is to boot the phone in Download mode but CDMA tools are not working as the phone is not in diag mode.
Anybody knows how can I read the IMEI of this phone? I checked this post but even getting into ADB it´s complicated as it never boots on the Recovery mode.
Thanks in advance.
Yedi
Click to expand...
Click to collapse
Ok, I think I know now the answer for this just in case somebody will have the same issue...
As I don't have any option to control the phone as the screen is smashed, there is no way to activate the Diag Mode (*#0808#) in order to make the CDMA tool read my IMEI.
Solution: I found on Ebay an HDMI adapter with also USB host for 10 british pounds approx. This way I should be able to use my TV as the screen with a mouse or keyboard
It's on its way, so as soon as I get it working or not I will post how it goes.
Cheers,
Yedi
Solved.
With the device I mentioned I was able to connect the phone to the TV via HDMI and also adapt a USB keyboard to be able to control it as the screen was broken.
Happy days!
Yedi
Hi guys,
i know this is not the right section, but i think that my friend has bought one of the 100 Lg L4 II sold in the world... :v but maybe you can help me the same. He has tryed to make a restore through the option placed in the setting menu, but when it rebooted, it went in bootloop. I'v read i can use KDZ to flash a sock rom, but it has to get into emergency mode, and i can't . Well i can get into download mode only, but the device is not recognised by the PC. So, maybe i don't do the right sequence for emergency mode (the one i found , i.e. volume buttons + power, let me get into download mode). thanks in advance.
up
sliker90 said:
Hi guys,
i know this is not the right section, but i think that my friend has bought one of the 100 Lg L4 II sold in the world... :v but maybe you can help me the same. He has tryed to make a restore through the option placed in the setting menu, but when it rebooted, it went in bootloop. I'v read i can use KDZ to flash a sock rom, but it has to get into emergency mode, and i can't . Well i can get into download mode only, but the device is not recognised by the PC. So, maybe i don't do the right sequence for emergency mode (the one i found , i.e. volume buttons + power, let me get into download mode). thanks in advance.
Click to expand...
Click to collapse
I don't know if it works on LII and here's how we enter to emergency mode, take out battery and press volume down + connect USB to pc.
But before that you need to install lg driver.
You can check the sticky for l7 on this section for more details.
And also, I think there's a separate LII section. Try to search.