Database Users

Please Help Very Frustrated.

hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:

dork997 said:
hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
Click to expand...
Click to collapse
Akalsemann said:
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Try that

Akalsemann said:
Try that
Click to expand...
Click to collapse
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens

Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann

vinura kithmal said:
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
Click to expand...
Click to collapse
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?

dork997 said:
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Click to expand...
Click to collapse
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk

dork997 said:
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
Click to expand...
Click to collapse
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom

Swimguy14 said:
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
vinura kithmal said:
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Click to expand...
Click to collapse
I followed instructions given earlier to install philz recovery, i opened it by booting into it immediately i selected format for new rom install. after that i am stuck on samsung logo i think the old rom is now deleted. Now i am downloading fresh 5.0.2 UK from sammobile i will download it and try to root it normally with flashing CF ROOT via odin. if it does not work then i will do what u guys said. I dont know if TWRP will work by the same method (booting immediately into recovery) but philz recovery did. And i will also try flashing a prerooted Rom. What i dont understand is that why is this happening in the first place? i had an alpha before i could enter into TWRP normally i rooted it with CF AUTO root normally...no errors or anything why is this happening on my S5? the last owner must have done something weird with it ...i am trying to figure out why is this happening in the first place. Appreciate ur feedback.

I also dont know why this is happening
and yeah
i had all the galaxy S series upto S5 and this the only device that is not rooting with CF-auto root
the latest updates from samsung may have done something i dnt knw
and eralier mentioned method worked 100% for me and i did root my device like that
And last owner may b or may not done anything with it because my device is a brand new and still i had that issue

Galaxy a3 300fu bootloop error

I have rooted my galaxy a3 300fu with kingroot and everything was perfect also I had twrp recovery
I tried to switch from kinguser to supersu with supersume app and everything was perfect I started supersu than it asked me to update binary and I could choose from normal or whatever and cwm/twrp I pressed on cwm/twrp and continued afterfew moments of using the app it asked me to update binary again now i pressed on normal and messege came out that update failed and asked me to reboot i pressed reboot than I was stuck in bootloop but I managed to enter twrp recoveryand tried most of tutorials but nothing works and also when I try to reboot my phone it says supersu not installed do youwant to install it and it says every single time please help me I'm new in this and sorry if I posted this on wrong place and my grammar

Easier way to recover phone is enter in download (vol-,power,menu) and flash stock rom using odin.
After that , you can root your phone and install TWRP again

cbolumar said:
Easier way to recover phone is enter in download (vol-,power,menu) and flash stock rom using odin.
After that , you can root your phone and install TWRP again
Click to expand...
Click to collapse
thank you for your help I will try to do that

cbolumar said:
Easier way to recover phone is enter in download (vol-,power,menu) and flash stock rom using odin.
After that , you can root your phone and install TWRP again
Click to expand...
Click to collapse
I need help where can I find stock rom i have tried dowload it from sammobile but it takes ages please help

I got the stock rom but I read somewhere that usb debugging must be on for download mode but I cant enable it because i cant power on my phone
nevermind I did everything now works fine

My phone won't boot!

Dear xda users,
I have a big problem with my Samsung S7 Edge G935F!
Yesterday my phone restarts continuously so I used Odin to flash Firmware Stock. First, I used this Firmware: http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 .
Odin doesn't show any errors and my phone restarts; but after Samsung S7 Edge Boot Splash Screen, the phone shows a screen with yellow triangle and Android dead and then, phone restarts in Stock Recovery Mode.
In the Recovery mode when I press Reboot System Now or PowerOff, appears "Verifying DMVerity Hash Tree..." and then "Failed" and my phone restarts again in Recovery.
I tried Wipe data and cache but Nothing!
Then I tried to repair firmware with Kies 3: No errors but my phone won't boot!!
And then I tried another firmware file with Odin but nothing!
The phone is Completely Stock! Recovery Mode and Download Mode work and the phone is recognised by PC.
Please help me!
Thanks in advance
Sorry for my english

re: firmware issues
adc.droid said:
Dear xda users,
I have a big problem with my Samsung S7 Edge G935F!
Yesterday my phone restarts continuously so I used Odin to flash Firmware Stock. First, I used this Firmware: http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 .
Odin doesn't show any errors and my phone restarts; but after Samsung S7 Edge Boot Splash Screen, the phone shows a screen with yellow triangle and Android dead and then, phone restarts in Stock Recovery Mode.
In the Recovery mode when I press Reboot System Now or PowerOff, appears "Verifying DMVerity Hash Tree..." and then "Failed" and my phone restarts again in Recovery.
I tried Wipe data and cache but Nothing!
Then I tried to repair firmware with Kies 3: No errors but my phone won't boot!!
And then I tried another firmware file with Odin but nothing!
The phone is Completely Stock! Recovery Mode and Download Mode work and the phone is recognised by PC.
Please help me!
Thanks in advance
Sorry for my english
Click to expand...
Click to collapse
Have you tried doing a "Factory Data Reset" in stock recovery yet?
If not, do that before doing anything else.
The Factory Data Reset in stock recovery will WIPE your internal
sdcard but it will not wipe your external SD if you have one.
Also it would be very helpful to know the exact filename(s) of the
stock firmware(s) which you have tried to odin flash and what the
model of your phone is. (G938F) or other variant?)
Good luck and have a great day!

Misterjunky said:
Have you tried doing a "Factory Data Reset" in stock recovery yet?
If not, do that before doing anything else.
The Factory Data Reset in stock recovery will WIPE your internal
sdcard but it will not wipe your external SD if you have one.
Also it would be very helpful to know the exact filename(s) of the
stock firmware(s) which you have tried to odin flash and what the
model of your phone is. (G938F) or other variant?)
Good luck and have a great day!
Click to expand...
Click to collapse
Thanks for your reply!
Yes I tried Wiped data/Factory Reset and Wipe cache partition in Stock Recovery..
Device: Samsung Galaxy S7 Edge
Model: SM-G935F
Firmwares tha I tried to flash with Odin:
Netherlands (Android 6.0.1) G935FXXU1APF2_G935FPHN1APE2_G935FXXU1APEQ_PHN
Italy (Android 6.0.1) G935FXXU1APF2_G935FITV1APE2_ITV

If flashing succeeds, and you still have the same problem:
go back with your device where you bought it
You can't solve it yourself, and probably something is wrong/defect with the main-board
When you 1st discovered the continuous reboot:
1. why did you not go to the store where you bought your phone?
2. why trying to flash "other firmware" on your phone instead of your "original firmware"?
What's your original CSC? Flash your phone with your original phone's CSC and bring your phone back for repair and/or replacement!

re: Odin flashing
adc.droid said:
Thanks for your reply!
Yes I tried Wiped data/Factory Reset and Wipe cache partition in Stock Recovery..
Device: Samsung Galaxy S7 Edge
Model: SM-G935F
Firmwares tha I tried to flash with Odin:
Netherlands (Android 6.0.1) G935FXXU1APF2_G935FPHN1APE2_G935FXXU1APEQ_PHN
Italy (Android 6.0.1) G935FXXU1APF2_G935FITV1APE2_ITV
Click to expand...
Click to collapse
Are you using the latest version of Odin3?
The latest version is "3.11.1" if not here
is the download link for it, give it a try:
https://www.androidfilehost.com/?fid=24572369242686812
Good luck,
Have a great day!

henklbr said:
If flashing succeeds, and you still have the same problem:
go back with your device where you bought it
You can't solve it yourself, and probably something is wrong/defect with the main-board
When you 1st discovered the continuous reboot:
1. why did you not go to the store where you bought your phone?
2. why trying to flash "other firmware" on your phone instead of your "original firmware"?
What's your original CSC? Flash your phone with your original phone's CSC and bring your phone back for repair and/or replacement!
Click to expand...
Click to collapse
In attacchments there are images of Recovery Mode.
I don't know CSC because phone won't boot to see the code.. Kies says that CSC code is PE2
I can not do anything.. right?

Misterjunky said:
Are you using the latest version of Odin3?
The latest version is "3.11.1" if not here
is the download link for it, give it a try:
https://www.androidfilehost.com/?fid=24572369242686812
Good luck,
Have a great day!
Click to expand...
Click to collapse
Yes, I did. I tried Odin v3.10.7 and v3.11.1

adc.droid said:
Yes, I did. I tried Odin v3.10.7 and v3.11.1
Click to expand...
Click to collapse
you could try samsung smartswitch for pc.If it works cool but if that does not work i suggest taking it back.

jdoggawesomex900 said:
you could try samsung smartswitch for pc.If it works cool but if that does not work i suggest taking it back.
Click to expand...
Click to collapse
I tried with Kies3 but the problem remains.. I think with Smartswitch is the same thing because the file and the installation procedure is identical.. I don't know

adc.droid said:
I tried with Kies3 but the problem remains.. I think with Smartswitch is the same thing because the file and the installation procedure is identical.. I don't know
Click to expand...
Click to collapse
But smartswitch is newer and supports most samsung devices 5.0 and up.Kies is not meant for anything higher than kitkat.

jdoggawesomex900 said:
But smartswitch is newer and supports most samsung devices 5.0 and up.Kies is not meant for anything higher than kitkat.
Click to expand...
Click to collapse
So I'll try with SmartSwitch..

Can't Root & Install CWM Recovery on Samsung Note 4

Hi Guys
I believe you guys on here will be able to help. Let me first tell you about my device and what I want to do and then what I did and what problems I encountered.
Device: Samsung Note 4 International Model SM-N910H (Exynos CPU)
OS: 6.0.1
Build Number: MMB29K.N910HXXU2DPE2
I only want to root my device and install Custom Recovery like CWM. I don't want to install a Custom ROM!
So I downloaded CF-Auto-Root-tre3g-tre3gxx-smn910h.tar.md5 and used Odin 3.12 to flash tar file to phone. After that phone rebooted and got stuck into the "Samsung Galaxy Note 4" Screen displaying in red letters on top left Corner "Recovery is not seandroid enforcing"
So I downloaded CWM Recovery v6.0.3.6.tar and flashed with Odin again, this time the phone rebooted back into my Working Phone OS and all seems fine. SO I wanted to test if CWM is installed? Powered phone down and booted into recovery & then got the same "Recovery is not seandroid enforcing" message on screen, so rebooted phone normally and it goes back into the OS. Also SuperU is not installed and phone is not rooted
So how do I solve this issue getting a Custom Recovery on my Phone Since I don't have any Recovery Mode option when booting into recovery. Your help, effort and time will be appreciated

Try again your steps and using odin both times make sure reboot is not ticked. After the flash pull the battery. There is a remark about that somewhere.
I had the same problem with my n9100 and at the end flashed custom rom to solve this. But my phone is slightly different to yours.

Thanks a mil, however I did manage to fix the issue and still wanted to resolve this post. I downloaded SuperU Beta 2.74 and different version of CWM. Installed CWM 6.0.5.1 (1113).tar with Odin 3.10.7 and it worked installing CWM Recovery. Then installed the SuperU 2.74 with CWM and everything works great. Phone now rooted and CWM installed :good::victory::victory:
******** Resolved ************

wilcovh said:
Try again your steps and using odin both times make sure reboot is not ticked. After the flash pull the battery. There is a remark about that somewhere.
I had the same problem with my n9100 and at the end flashed custom rom to solve this. But my phone is slightly different to yours.
Click to expand...
Click to collapse
I have the n9100 as well with the hong kong rom. I'm having the same problem while trying to root with cf-autoroot. I really want to root the phone while keeping the stock rom.
Is there any way to do so??

Problem with recovery mode

Hello everyone,
I am trying to install new firmware to my phone. i have not made backup of my phone. I root my phone using kingroot but when i reboot my phone into recovery mode, it restart to normal.
my set is
Samsung galaxy Core Prime
Model: SM-G360H
Baseband: G360HDDU0AO
Android: 4.4.2

ahsan12345 said:
Hello everyone,
I am trying to install new firmware to my phone. i have not made backup of my phone. I root my phone using kingroot but when i reboot my phone into recovery mode, it restart to normal.
my set is
Samsung galaxy Core Prime
Model: SM-G360H
Baseband: G360HDDU0AO
Android: 4.4.2
Click to expand...
Click to collapse
Kingroot is always bad for your device.
1) Flash your firmware in the AP slot of Odin.(Using one from sammobile.com is recommended and flashing firmware does not overwrite your data.)
http://www.sammobile.com/firmwares/database/SM-G360H/
2) Flash this TWRP here in Odin (AP slot):
http://forum.xda-developers.com/showthread.php?p=65386115
3) Flash the SuperSU installable zip(not the app) to root from here:
http://forum.xda-developers.com/showthread.php?p=68475511
(By the way, before rooting by any method, make sure "OEM Unlocking" is switched on in Developer Options in Settings or you will likely trip Factory Reset Protection in your device and get locked out, though this is also fixable.)
4) Never select "Reboot to Recovery" from anywhere on your Core Prime device. It will cause a recovery loop.

Odin does not detect my mobile. I have download usb drivers also.