need GT-i9500 fix_imei_null.zip file - Galaxy S 4 Q&A, Help & Troubleshooting

Hello,
i'm looking for this file "GT-i9500 fix_imei_null.zip" if u would please help me
i just found this old and non working link here http://www.mediafire.com/download/61zvhbf5c9a46dc/GT-i9500+Fix_imei_null_new
thanks in advance

vbfather said:
Hello,
i'm looking for this file "GT-i9500 fix_imei_null.zip" if u would please help me
i just found this old and non working link here http://www.mediafire.com/download/61zvhbf5c9a46dc/GT-i9500+Fix_imei_null_new
thanks in advance
Click to expand...
Click to collapse
HERE.

Joku1981 said:
HERE.
Click to expand...
Click to collapse
thank you, i got this message when i try to flash it by odin
"MD5 hash value is invalid
S4-GT-i9500-Fix_imei_null.tar.md5 is invalid"
and one thing more that this file is 1.6 gb ! so it seems as i9500 software file i thought that fix file has lower size than that?!

vbfather said:
thank you, i got this message when i try to flash it by odin
"MD5 hash value is invalid
S4-GT-i9500-Fix_imei_null.tar.md5 is invalid"
and one thing more that this file is 1.6 gb ! so it seems as i9500 software file i thought that fix file has lower size than that?!
Click to expand...
Click to collapse
The size is the correct. They were using it for recover one i9500 in this forum too.

Joku1981 said:
The size is the correct. They were using it for recover one i9500 in this forum too.
Click to expand...
Click to collapse
thanks again, tested by remove .md5 extension but i still have problem with imei. its generic imei now

Related

[Q] NexusHD2 3.0 won't unzip

okay i know this is a very noobish question, but i've downloaded NexusHD2 Version 3.0 the SD one. it downloads as a 7z file. i can't get it to unzip! it says the structure is damaged or corrupted. i've tried stuffit expander and the unarchiver and nothing is working. help????
Just redownload it.
i have several times. and on different computers
make sure you have the lastest version of 7-zip.
here is their link : http://7-zip.org/
montecarlo5 said:
make sure you have the lastest version of 7-zip.
thanks m8, really solve my problem
MT
Click to expand...
Click to collapse
mt2011 said:
montecarlo5 said:
make sure you have the lastest version of 7-zip.
thanks m8, really solve my problem
MT
Click to expand...
Click to collapse
He'd like it more if you hit his Thanks button instead of saying "thanks" to him .
Click to expand...
Click to collapse

Nice work for cm10.1

tks
but nvflash_CM10.1_Wifi_Kaschemme_v1.zip is corrupt
nobody......
kayinchan said:
tks
but nvflash_CM10.1_Wifi_Kaschemme_v1.zip is corrupt
Click to expand...
Click to collapse
anyone here?
kayinchan said:
tks
but nvflash_CM10.1_Wifi_Kaschemme_v1.zip is corrupt
Click to expand...
Click to collapse
i cant use it.can anyone help me ?
If it says its corrupt then it downloaded wrong - download it again. Confirm its md5sum matches up before trying to install it. If it still is corrupt, then try another browser or computer... the last time I was having corrupt file downloads it ended up being the download manager I was using.
Check the newest release. It was released 7-19. It works great!
Pls I want to download cm 10.1 for my Lenovo ThinkPad tab, help me

[Q] Can't install hltexx CM rom on hltexx SM-N9005 device.

Hello guys, I have a Samsung Galaxy Note 3 SM-N9005 device on which I installed CyanogenMOD from a tutorial I found on the Internet, but everytime I was going through my Setting > About I could see that it showed my device as an N9000 device. So now I was thinking to do a reinstall with the correct hltexx version but when I'm trying to install the cm-11-20140123-NIGHTLY-hltexx.zip It shows me an ERROR: 'This package is for "hltexx" devices; this is a "hlte".
What can I do to fix my phone? I have already formated everything and I'm just waiting for a solution. I searched already on google but I couldn't find anything.
Thank you in advance, I will try to reply instantly check back if you replied. I hope I didn't broke my device.
Sorry for my English.
nexussp said:
Hello guys, I have a Samsung Galaxy Note 3 SM-N9005 device on which I installed CyanogenMOD from a tutorial I found on the Internet, but everytime I was going through my Setting > About I could see that it showed my device as an N9000 device. So now I was thinking to do a reinstall with the correct hltexx version but when I'm trying to install the cm-11-20140123-NIGHTLY-hltexx.zip It shows me an ERROR: 'This package is for "hltexx" devices; this is a "hlte".
What can I do to fix my phone? I have already formated everything and I'm just waiting for a solution. I searched already on google but I couldn't find anything.
Thank you in advance, I will try to reply instantly check back if you replied. I hope I didn't broke my device.
Sorry for my English.
Click to expand...
Click to collapse
You need to edit your updater script.
OR
You can try one of the custom CM's we have HERE on XDA, that have all the CM features plus some extra's baked in
nexussp said:
Hello guys, I have a Samsung Galaxy Note 3 SM-N9005 device on which I installed CyanogenMOD from a tutorial I found on the Internet, but everytime I was going through my Setting > About I could see that it showed my device as an N9000 device. So now I was thinking to do a reinstall with the correct hltexx version but when I'm trying to install the cm-11-20140123-NIGHTLY-hltexx.zip It shows me an ERROR: 'This package is for "hltexx" devices; this is a "hlte".
What can I do to fix my phone? I have already formated everything and I'm just waiting for a solution. I searched already on google but I couldn't find anything.
Thank you in advance, I will try to reply instantly check back if you replied. I hope I didn't broke my device.
Sorry for my English.
Click to expand...
Click to collapse
common problem !
extract the updater-script from the cm archive. folder = \META-INF\com\google\android
open in texteditor, remove the first line and save the file. (first line is the device check.)
repack the file to the archive.
flash and enjoy !
radicalisto said:
You need to edit your updater script.
OR
You can try one of the custom CM's we have HERE on XDA, that have all the CM features plus some extra's baked in
Click to expand...
Click to collapse
Thank you! Wow, so many of them which should I try. For start I will try to edit my updater script and if it doesn't work I will try something from that huge list you gave me! Thank you again!
Thank you A.N.Droid. I can't find the updater-script in META-INF>com>google>android. The only thing I can find there is the: metadata and otacert file, maybe it's because I'm using Linux and I don't have the right Archive Manager.
Should I delete the third line in metadata?
post-build=samsung/hltetmo/hltetmo:4.3/JSS15J/N900TUVUBMI7:user/release-keys
post-timestamp=1390477424
pre-device=hltexx
Click to expand...
Click to collapse
nexussp said:
Thank you! Wow, so many of them which should I try. For start I will try to edit my updater script and if it doesn't work I will try something from that huge list you gave me! Thank you again!
Thank you A.N.Droid. I can't find the updater-script in META-INF>com>google>android. The only thing I can find there is the: metadata and otacert file, maybe it's because I'm using Linux and I don't have the right Archive Manager.
Should I delete the third line in metadata?
Click to expand...
Click to collapse
Remove the two xx
radicalisto said:
Remove the two xx
Click to expand...
Click to collapse
does this work too ? just wonderig...
@nexussp
you looked at the wrong folder(\META-INF\com\android). updater script is located at \META-INF\com\google\android
A.N.Droid said:
does this work too ? just wonderig...
@nexussp
you looked at the wrong folder(\META-INF\com\android). updater script is located at \META-INF\com\google\android
Click to expand...
Click to collapse
I just realized that. THANK YOU EVERYONE, my phone is fine and is working like a charm.
And removing the two xx from hltexx in metadata doesn't work.

[N8000][ROM 4.4.2 Samsung offcial not final] So I herd u lieke kitekats?

I tihnk you know what to do with those :
Code:
PIT if you **** something up :
NOTE.pit
[url]http://www50.zippyshare.com/v/47648425/file.html[/url]
BL :
[B]BL_N8000XXUDND5.tar[/B]
[url]http://www13.zippyshare.com/v/45313724/file.html[/url]
MODEM :
[B]MODEM_N8000XXUDND2.tar[/B]
[url]http://www64.zippyshare.com/v/59505193/file.html[/url]
CSC :
[B]CSC_OXA_N8000OXADND5.tar : [/B]
CSC_OXA_N8000OXADND5.zip
[url]http://www67.zippyshare.com/v/82582924/file.html[/url]
CSC_OXA_N8000OXADND5.z01
[url]http://www48.zippyshare.com/v/56875063/file.html[/url]
CSC_OXA_N8000OXADND5.z02
[url]http://www39.zippyshare.com/v/97261232/file.html[/url]
AP:
[B]AP_N8000XXUDND5.tar [/B]:
AP_N8000XXUDND5.zip
[url]http://www57.zippyshare.com/v/73873394/file.html[/url]
AP_N8000XXUDND5.z01
[url]http://www3.zippyshare.com/v/46722430/file.html[/url]
AP_N8000XXUDND5.z02
[url]http://www30.zippyshare.com/v/47884001/file.html[/url]
AP_N8000XXUDND5.z03
[url]http://www32.zippyshare.com/v/39571794/file.html[/url]
AP_N8000XXUDND5.z04
[url]http://www65.zippyshare.com/v/21536434/file.html[/url]
AP_N8000XXUDND5.z05
[url]http://www69.zippyshare.com/v/78725952/file.html[/url]
AP_N8000XXUDND5.z06
[url]http://www35.zippyshare.com/v/63192076/file.html[/url]
Total size is 1.7 GB
cd693fa332ba726865f2a4c9deb8bcf8 *AP_N8000XXUDND5.z01
7bb5c3d04a78ce33a25d290e9e94449f *AP_N8000XXUDND5.z02
930b5e9b9967ce8bbe86636300306a11 *AP_N8000XXUDND5.z03
efed7941769df605fbe6688c90ab81ba *AP_N8000XXUDND5.z04
cc5e7392fd478c5ef5f323ec51670abc *AP_N8000XXUDND5.z05
84717273ef520fd5c0ca75a606744bf9 *AP_N8000XXUDND5.z06
e125605342807fe474903fef7ca9c873 *AP_N8000XXUDND5.zip
806c518c6e1ceb508c469f7a607dd753 *BL_N8000XXUDND5.tar
e88023c8350a74bb78ba6412aa8f71bb *CSC_OXA_N8000OXADND5.z01
1b7a5a5c93508c3b8ba5e5c094ba0307 *CSC_OXA_N8000OXADND5.z02
ab7450381eef3797c009c264081d9d78 *CSC_OXA_N8000OXADND5.zip
09c4f509d471d857f292c603d147ffe1 *MODEM_N8000XXUDND2.tar
Thanks!!
Great neeew!! Now we need 4.4.2 for the 8010/8013!!
Thanks !! And what about the 8010/8013 version ?
You can add the N8010?
These files are not very heavy, do not think they are the roms, as installed? works with odin?, my to install my tablet stays in download mode
1.86 mb? This isn't the full update file, it didn't upload properly
Sent from my SM-N900P using Tapatalk
This clearly isnt a samsung rom or any rom of any sort, not at those file sizes, what is this junk?
Guys, can you read?
It clearly says :
CSC :
CSC_OXA_N8000OXADND5.tar
uploading...
AP:
AP_N8000XXUDND5.tar
uploading...
CSC and AP tomorrow/saturday
Click to expand...
Click to collapse
AP is the whole operating system to flash! This file may be over 1Gb .
i will believe it when i see if, nothing anywhere about any kitkat leaks, no explanation from OP where it came from... very suspect.
Could someone post screenshots please?
Finished.
Also I think this CAN work on 8010, you just flash without MODEM part.
Try at your risk tho.
da.trute said:
i will believe it when i see if, nothing anywhere about any kitkat leaks, no explanation from OP where it came from... very suspect.
Click to expand...
Click to collapse
Because you totaly cant check someones thread history and thanks meters
where it comes from?
izap said:
Finished.
Also I think this CAN work on 8010, you just flash without MODEM part.
Try at your risk tho.
Because you totaly cant check someones thread history and thanks meters
Click to expand...
Click to collapse
Izap, thanks sharing this files, could you explain where the files come from?
izap said:
Finished.
Also I think this CAN work on 8010, you just flash without MODEM part.
Try at your risk tho.
Because you totaly cant check someones thread history and thanks meters
Click to expand...
Click to collapse
I would try to flash it on my n8010. But if it fails, can i flash back to 4.1.2 or a rom?
beginner said:
Izap, thanks sharing this files, could you explain where the files come from?
Click to expand...
Click to collapse
Santa Claus
Akeel1994 said:
I would try to flash it on my n8010. But if it fails, can i flash back to 4.1.2 or a rom?
Click to expand...
Click to collapse
Probably
If you put BL, AP and CSC in good places in Odin it shouldn't fail.
If it fails on the very beginning then it's just not compatible with N8010 and nothing bad should happen.
Okay, I see there are different parts of AP for example. How can I make one zip of them?
Akeel1994 said:
Okay, I see there are different parts of AP for example. How can I make one zip of them?
Click to expand...
Click to collapse
You unpack them into 1 tar file.
If you dont know what you are doing please dont do it. I posted it here on developers forum for people who know what to do.
Why parts? Because zippyshare has 200MB limit.
That is not a problem. I already flashed a lot of roms and worked with odin. But I never used zip files which were splited. So to make it clear: I download and mark the parts and zip them to a .tar archive. Right?
izap said:
Finished.
Also I think this CAN work on 8010, you just flash without MODEM part.
Try at your risk tho.
Because you totaly cant check someones thread history and thanks meters
Click to expand...
Click to collapse
should have, didnt really have time, made an incorrect assumption, apologies. Holding my hands up !
Akeel1994 said:
That is not a problem. I already flashed a lot of roms and worked with odin. But I never used zip files which were splited. So to make it clear: I download and mark the parts and zip them to a .tar archive. Right?
Click to expand...
Click to collapse
LOL, Not quite. You would download them all, then use 7-Zip or something like that to unpack the first one in the series. It will unpack them all, and the result should be one .tar file
Sent from my GT-N8013 using Tapatalk
Thank you!
Can someone make a screenshot?
Verstuurd vanaf mijn GT-I9300 met Tapatalk

[Q] T530NU Pit file???

Hello guys,
I'm new to the forum, but i am having a serious issue with my galaxy tab T530NU.
can anyone post me the pit file for the above model.
Thank you very much
nadimrishmawi said:
Hello guys,
I'm new to the forum, but i am having a serious issue with my galaxy tab T530NU.
can anyone post me the pit file for the above model.
Thank you very much
Click to expand...
Click to collapse
Hi ,
How to make a PIT look http://forum.xda-developers.com/showpost.php?p=56571584&postcount=1 .
I think that my pit for SM-T530 can approach, and if not will approach, then everything will remain as before.
hi,
okay, i recommend following @repey6 's suggestion
and then comparing the pit file you generate/extract
with the one i extracted with the following command.
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=481 skip=2176
link- edit -fails
to curb the noob menace, extract the file first. :cyclops:
looking at the file i believe the name of the pit file should be PITMSM8x26.pitH
if incorrect remove the H
i have attached the file for comparison. Execute the same above command in your device's own terminal [any interested user]
to generate your own out.pit for comparison with the output from repey6 's suggestion.
m
moonbutt74 said:
hi,
okay, i recommend following @repey6 's suggestion
and then comparing the pit file you generate/extract
with the one i extracted with the following command.
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=481 skip=2176
link- http://d-h.st/Zajw
to curb the noob menace, extract the file first. :cyclops:
looking at the file i believe the name of the pit file should be PITMSM8x26.pitH
if incorrect remove the H
i have attached the file for comparison. Execute the same above command in your device's own terminal [any interested user]
to generate your own out.pit for comparison with the output from repey6 's suggestion.
m
Click to expand...
Click to collapse
Hi , what TAB you have ?
repey6 said:
Hi , what TAB you have ?
Click to expand...
Click to collapse
repey,
hi, i have an sm-t530nu.
m
moonbutt74 said:
repey,
hi, i have an sm-t530nu.
m
Click to expand...
Click to collapse
m , sorry I do not speak English very well, so I do not quite understand what I should do. And why? I SM-T530. My pit is absolutely correct and reliable.
Regards .
repey6 said:
m , sorry I do not speak English very well, so I do not quite understand what I should do. And why? I SM-T530. My pit is absolutely correct and reliable.
Regards .
Click to expand...
Click to collapse
repey,
hi, my interest is in finding out if the pit i pulled using the command i mentioned is correct.
can you post yours so i can compare them?
m
moonbutt74 said:
repey,
hi, my interest is in finding out if the pit i pulled using the command i mentioned is correct.
can you post yours so i can compare them?
m
Click to expand...
Click to collapse
Do you want me to do out.pit through the terminal to your recipe? And then you want to compare them?
repey6 said:
Do you want me to do out.pit through the terminal to your recipe? And then you want to compare them?
Click to expand...
Click to collapse
repey,
hi, can you post the pit file you generated with efs pro?
m
moonbutt74 said:
repey,
hi, can you post the pit file you generated with efs pro?
m
Click to expand...
Click to collapse
So this pit I made using efs pro
repey6 said:
So this pit I made using efs pro
Click to expand...
Click to collapse
repey,
hi, okay so can you post it? i'd like to see it.
m
moonbutt74 said:
repey,
hi, can you post the pit file you generated with efs pro?
m
Click to expand...
Click to collapse
moonbutt74 said:
repey,
hi, okay so can you post it? i'd like to see it.
m
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56133249&postcount=3
repey,
hi, thanks, iwas trying to figure out if the command i was talking about before worked for the galaxy tab4.
Your pit file looks similar to mine so i think the command does work like on other samsung devices.
thanks. :good:
m
moonbutt74 said:
repey,
hi, thanks, iwas trying to figure out if the command i was talking about before worked for the galaxy tab4.
Your pit file looks similar to mine so i think the command does work like on other samsung devices.
thanks. :good:
m
Click to expand...
Click to collapse
Before we found efs pro, we've done a lot of attempts to create a pit terminal. All failed. With efs pro obtained 100% results.
repey6 said:
Before we found efs pro, we've done a lot of attempts to create a pit terminal. All failed. With efs pro obtained 100% results.
Click to expand...
Click to collapse
repey,
does efs handle custom pit creation ?
if not, do you know of an application that does?
m
moonbutt74 said:
repey,
does efs handle custom pit creation ?
if not, do you know of an application that does?
m
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
Pit
Thank you all,
the thing is that my tab tells me : memory damaged reset device. and i cannot boot into recovery mode, the only thing that i can boot into is download mode, and when i tried to flash a rom it fails telling me that mmc write failure . and when i searched in all forums, i understood that my tab's PIT is corrupted and i need a new one in order to flash it with odin .along with a rom. i tried the pit that moonbutt74 posted but still the same thing . It fails.
nadimrishmawi said:
Thank you all,
the thing is that my tab tells me : memory damaged reset device. and i cannot boot into recovery mode, the only thing that i can boot into is download mode, and when i tried to flash a rom it fails telling me that mmc write failure . and when i searched in all forums, i understood that my tab's PIT is corrupted and i need a new one in order to flash it with odin .along with a rom. i tried the pit that moonbutt74 posted but still the same thing . It fails.
Click to expand...
Click to collapse
M Ask for him to make a pit with efs pro . How get pit read http://forum.xda-developers.com/tab-4/general/guide-how-to-pit-file-qualcomm-device-t2932088 .
M can you do it for me?
thanks
nadimrishmawi said:
M can you do it for me?
thanks
Click to expand...
Click to collapse
You can to try my pit and your stock firmware at the same time via Odin .

Categories

Resources