TeamUB lollipop ROM - USB unmount - Galaxy S 4 Q&A, Help & Troubleshooting

Hi all,
Thought I'd make a separate thread for this one as my previous 3 posts have been completely ignored in various help threads.
I'm running the TeamUB lollipop ROM on a galaxy S4 I9505.
Problem: cannot unmount a USB drive connected via an OTG cable. Drive information is not displayed in the storage menu either.
However I can access the USB using ES File Explorer, which also has the eject icon next to the USB drive. Using this method seems to disrupt the expansion micro SD card, with my almost new 32gb card becoming unreadable after copying from the USB drive to the Micro SD. Internal storage is fine.
Are there any tools to help debug this issue, or has anyone got any advice?
Thanks in advanced.
LUK3H4RR15.

Related

USB memory Stick

Does Elocity A7 support NTFS file system? I have problems accessing my USB stick which is formatted in NTFS...or something else may be an issue !?!. In any event it can not read it...any suggestion?
Regards
Upgraded firmware and now when USB memory stick is plugged in I am getting a message the it is being checked for errors....but data on it so far cannot be accessed...Anybody else has issues with reading memory stick thru USB port?...SD card works like charm...
Regards
When I first got mine I was using my key which is fat32 and ran into the same problem. I had to reset the device before I could use my usb stick again. Haven't tried an NTFS usb device but either way it's not on the a7 to support NTFS, it is Android's task.
It would be interesting to know if other people had problems of accessing USB memory stick...for me memory stick would be much easier mean of exchange software/data between PC and Elocity than microSD.
Regards
I found out that if memory stick is formated as FAT32 then Elocity has no problem reading it...
USB memory stick
I have no problem accessing my USB stick, my problem is transfering the data like music or movies into folders which Elocity a7 doesn't allow me to do.
I have tried coping and or moving files i.e., songs, movies, am I doing something wrong or is there a right way to do it?
You can copy files from USB to SD card...only file by file not directories
The other way is to pull out your SD card and copy files on it using adapter on your PC
The third way is to use application which lets you access your Elocity using your browser on your network which will then allow you to copy files to/from device
Regards
My a7 originally could mount and read the sd card and the usb drive. Then one day it suddenly would not mount the sd card and it always said it was checking for errors. I tried a wipe and restore, formatting the card, and a different card. None of it worked. Finally I loaded Dexter's 1.41 mod. The mod worked great but the sd card still couldn't be mounted. And then the usb drive gave me errors and one time would work and another time it says preparing storage checking for errors. Right now neither the sd card or the usb are being mounted. After 4 emails to elocity support I am pretty frustrated with this unit and thinking of just ordering an ipad.
ellwilson said:
My a7 originally could mount and read the sd card and the usb drive. Then one day it suddenly would not mount the sd card and it always said it was checking for errors. I tried a wipe and restore, formatting the card, and a different card. None of it worked. Finally I loaded Dexter's 1.41 mod. The mod worked great but the sd card still couldn't be mounted. And then the usb drive gave me errors and one time would work and another time it says preparing storage checking for errors. Right now neither the sd card or the usb are being mounted. After 4 emails to elocity support I am pretty frustrated with this unit and thinking of just ordering an ipad.
Click to expand...
Click to collapse
Do you apply the vold patch with 1.41? Also you have to have a folder/directory sdcard/sdcard-disk (sdcard-disk) is the one needed. This still won't allow card to be read from boot other then applying zips with sysrecovery. It has been mentioned before in another thread if your not running elocitys FW you can't really complain about it to them.
If that folder/directory isn't created it won't read with the patch. USB also has something about it. Read up on this thread.
http://forum.xda-developers.com/showthread.php?t=890042
Hello, I'm new here and I did experience some sort of USB or MicroSD issue where the eLocity unit did read the USB at first and then the next time I put the USB flash drive it cannot read it, no matter what I do. Then I hit the reboot key at the back using a pin or something sharp and I tested both drives and it did read them.
I learn that before removing the USB FD you need to dismount by tapping the connection icon to safely remove the USB. You will then receive a message to confirm the removal of USB drive.
I hope this help.
Peace....

How to format micro sd to FAT32 DIRECTLY from my samsung galaxy s 3

Hello guys, I am new here...
Yesterday I rooted my devices and planned to installed Supernexus Rom. But in the forum said that it needed FAT32 micro SD so I need to format it.
Unfortunately, i dont have adapter for microSD and my USB card doesnt have slot for micro SD.
I only have USB cable that connect me to my mac.
Is there other way to format my microSD to fat32 DIRECTLY from my samsung galaxy s 3?
thanks
You need to go to Settings -> Storage and scroll to the bottom of the list. before formatting the card you most likely have to mount it.

[Q] Can't detect my(Samsung Galaxy Y S5360) storage through cable.

Hello
I bought Samsung Galaxy Y a year ago.I got installed 16GB memorycard and I rooted it.
Recently I have partitioned it into #1GB EXT2 RAM and rest of memory into FAT32, henceforth i didn't connect my storage through the cable but it is able to charge through my PC.I tried it in both Linux and Windows platforms but problem remained same.
Can u please suggest the solution to me?
Try
have you tried card reader?
Can your phone read the sd card?
If so go into cwm and you can repartition your sd card (all data on sd card will be lost)
if after that your pc can't read sd card but your phone can it's the cable
of course I'm assuming when you plug in the cable you are getting the notification in the statusbar bar on phone that usb is connected and you open the statusbar click the notification then depending on rom either press on the android image or button to connect storage

File transfers to usb or sdcard (turned into internal storage) question

Hey everyone,
I was wondering if anyone can help me. I'm trying to put files like emulator files on my usb drive that has been converted internal storage (usb). My computer won't read the usb after it is formatted to be an internal storage.
I have the files on a sdcard but wondering how I can transfer all that to be on the usb drive.
Please let me know thanks!
As far as I know once you format any external storage as internal then that drive is going to be encrypted. This is the reason why your PC won't read it when you insert it back to its own USB ports. You can read it via NSTV if you connect it to your computer via USB cable as long as you enable USB debugging. To recover the USB for general use you have to erase it from NSTV/storage and then eject and then it might work again on your PC. I said it might because sometimes you would have to do a low lever format to completely remove the encryption. Good luck.

SD Card now showing when i connect my S7E to the Computer?

Hey guys,
as written in the topic, since yesterday i cannot access my SD Card when i plug my S7E via USB Cable to the PC. It just shows the Internal Storage but not the "SD Card" folder anyway.
tho, i can access it via FTP.
I already tried to format my SD but it still doesnt show up on USB mode.
Any help?
no one got an Idea?

Categories

Resources