Related
Brief: Back up All - Contacts & Data (Remove Sim Card)
[Unlock Phone] [Install 'z4root.1.3.0.apk' 955.48kb] [Install 'Rom Manager' Android Market][Install 'Superuser' Android Market]
Ok the way we are doing this is
2.1 -> 2.2 fastboot -> 2.3.3
Start -
First Install Driver on PC:
'LGAndroidDriver_WHQL_ML_Ver_1.0_All_Win7'
Download this Link to PC: KDZ Updater Europe Open.zip 144mb
Put your phone into Download Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'volume down' and hit 'Power-on'
4. The screen should display 'Download mode'
5. Plug in 'USB'
Extract KDZ Updater Europe Open.zip to your PC/Laptop
1. Run 'kdz_fw_upd'
2. Choose '3gqct' as the 'Type'
3. Choose 'Diag' as the mode
4. Click 'File icon' and select 'Europe Open+Fastboot.kdz'
then hit Launch Software Update
Please note: that you DO NOT have to let this flash finish (BUT IT IS EXTREMLY RECOMMENDED.. takes forever on this rom tho lol)
as we only need the fastboot part of it so leave it flashing for a few mins then remove the phone the updater software will come up with a few errors but just ignore them
Ok now we need the latest Recovery version of the swiftdroid software
Since i used 1.8 i will use this in this tutorial
Download Gingerbread 2.3.3 SwiftDroid_v1.9 95.2Mb
Ok extract the above file to your Pc/Laptop
Now take the 'update.zip' file from extracted folder and copy it to the root of your phones 'SD card'
Now put your phone into fastboot mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold in 'Camera button' and press 'Power-on'
4. Keep camera button pressed until 'logo' disappears and it shows a 'blank screen'
5. Make sure phone is plugged into USB
Now open where you extracted folder the above archive (Gingerbread 2.3.3 SwiftDroid_v1.9)
1. Open 'CMD' within folder
2. Type 'flash_recovery.bat' to run
What this does is flash cyanogenmod recovery to your phone
which is a great tool for updating firmwares and restoring from bricks
Now we will put the phone into 'recovery mode'
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'Home button' and press 'Power-on'
4. Keep holding down the 'Home button' until the cyanogenmod recovery menu pops up (it takes a while.)
Now to install the 2.3 rom
1. Press the 'volume' down until 'install zip from sdcard' is selected
2. Then press the 'camera button'
3. Then press the 'camera button' on 'apply /sdcard/update.zip'
4. Then Press the 'volume' up and choose 'yes' and press the 'camera button'
Now this part will take a while (around 5-10mins)
it will say flash complete! when finished and will return to menu once done.
Menu will come back up...
Hit your 'Back button' and select 'reboot system now'
-------------------------------------------------------------------------
Note: if your phone hangs after reboot - I would like you to do below because you have ran out of room on your 'Internal memory' or 'Conflict'
Recovery Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'Home button' and press 'Power-on'
4. Keep holding down the 'Home button' until the cyanogenmod recovery menu pops up (it takes a while.)
Wipe Data/Factory Reset
1. Press the 'volume' down to 'Wipe Data/Factory Reset'
2. Then Press the 'volume' up and choose 'yes' and press the 'camera button'
Now restart back at top of this page write-up
Put your phone into Download Mode
1. Take out 'Battery'
2. Put in 'Battery'
3. Hold down 'volume down' and hit 'Power-on'
4. The screen should display 'Download mode'
5. Plug in 'USB'
-------------------------------------------------------------------------
Tips..
When it loads it will ask you to slide the keyboard( lol what keyboard) the workaround this is to exit out of that part and sign in with ur google login in the market this will activate all the google apps and give you options to download gmail etc
Produced by Stryker’s Lounge AUS
Original Guide by aaa801 (good effort for first guide)
You have any video it is very clumsome for me please upload any
Sent from my GT540 using XDA Premium App
Ummm you forgot to provide any download links for the files you mentioned in the post. No use without those.
Getting Widgets Working in Android version 2.3.3
Home – Setting – Applications – Manage applications
Under Downloaded:
Look for Widgets you want to use on phone desktops
Click ‘Move to Phone’
Reboot Phone after..
Now Long-press Desktop
Select Widgets and Scroll and select
By Stryker's Lounge AUS
Thank you for your responce, I have included the MB, KB etc
Just copy/paste program as is on search web and download exact MB,KB
We are new here so I have to wait for 9 before I can come back and readd Links
Hope this helps...
p.s careful of downloads not exact MB or KB they are fake/trojans
Rooting doesn't unlock the phone and also you don't need to install ROM Manager, the GT540 doesn't support it.
Jack
HQRaja said:
Ummm you forgot to provide any download links for the files you mentioned in the post. No use without those.
Click to expand...
Click to collapse
Download links are available just hit search......
Sent from my GT540 using XDA App
JackG256 said:
Rooting doesn't unlock the phone and also you don't need to install ROM Manager, the GT540 doesn't support it.
Jack
Click to expand...
Click to collapse
Thanks JackG256,
The title of cause does not state anything about unlocking phones but however if you
go to Stryker's Lounge AUS Facebook...
Stroll down to bottom the last on current and older posts you'll find two free options but if your phone is not in list or a member of second option being 'Vodaphone' and neither have it -
I would recommend using a retail store to unlock....
bretthutton said:
Thanks JackG256,
The title of cause does not state anything about unlocking phones but however if you
go to Stryker's Lounge AUS Facebook...
Stroll down to bottom the last on current and older posts you'll find two free options but if your phone is not in list or a member of second option being 'Vodaphone' and neither have it -
I would recommend using a retail store to unlock....
Click to expand...
Click to collapse
I know it wasn't in the title, I thought it said at the top Unlock phone by rooting at the top of the post. Also, my phone is factory unlocked.
Jack
This seems familiar, AHA I WROTE MOST OF IT lol
Sent from my GT540 using XDA App
Produced by Stryker’s Lounge AUS
Original Guide by aaa801
ermm why did you remove the original guide credit..
Does everything work with this/these updates? anny (negative) effects on e.g. battery life?
aaa801 said:
Produced by Stryker’s Lounge AUS
Original Guide by aaa801
ermm why did you remove the original guide credit..
Click to expand...
Click to collapse
I've reported this post as copyright infringing and said you are the rightful owner of this article. Hopefully XDA Admins sort it out.
Jack
JackG256 said:
I've reported this post as copyright infringing and said you are the rightful owner of this article. Hopefully XDA Admins sort it out.
Jack
Click to expand...
Click to collapse
-.- i just want the credits to be left in like every other forum did -.-
With Compliments
aaa801 said:
This seems familiar, AHA I WROTE MOST OF IT lol
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
Thank you aaa801, As I said great first guide write-up, we fix tweaks up now and then that have been written because people overlook things, do not account for updates in their tweaks or forget that people are 'Novice Users'
Its not a good unless it works top to bottom....
My suggestion is to write it as you are doing it to guarantee that nothing is overlooked...
I could not suggest site of original post because they compete with this site..
..........
LEN
Only one don't use 'Lock Similar Card' drops you off provider
There are no problems batterylife is same don't forget to follow the setups guide after done 'Performance Setup CyanogenMod Settings' found in xda
Sent from my GT540 using XDA App
yer when i was writing the guide i had fastboot etc all in my path as i like screwing with android phones etc
nice rewrite tho, much easier for the newbs
btw the original guide was on modaco and they post links to xda there so i see no problem with saying that here
the headset button on mine doesn't work.. is this a known?
DingIsBack said:
the headset button on mine doesn't work.. is this a known?
Click to expand...
Click to collapse
Yes, that's a known bug with SwiftDroid
Sent from my jv02 using XDA App
ROM contents
1, using the latest development version of the the MIUI transplant system perfectly stable, change the model for the HTC, modify the boot animation
2, the kernel G major MIUI repair kernel, do not break the sound
3, individuals joined enhance the script and add a few features: turned on by default 80M of Zram default unlock the FPS, you can turn off to enhanced.conf
4, all normal functions, to in addition to FM, the TV-OUT .
5, by adding the RE Manager, Google PLAY, goggles, the Huawei document management, animation acceleration, replace the input method Sogou
Integrated titanium backup and MIUI control center, you can customize the status bar
8, modify the boot theme is self produced IPHONEV1 optimize the camera and power-saving mechanism. Interface fluency can be used to adjust other settings
9 , add ice4.0, window effects, if you feel slow with other settings to modify the animation speed
10, to modify the system wallpaper, system sounds, calls music and other more personalized
11, the boot since the launch of the EQ manager, automatically adjust the sound of music. Listen to music the effect of greatly optimized.
PS: MIUI2.3 now break the sound problem solved, reaches the perfect state, there are some minor issues such as: volume shock and screenshots screenshots screenshots repair will lead to gravity sensing, I have limited skills do not specify a screenshot button . After miui no major updates, and I are working on to release a small update patch package. Can be updated to the OTA, as removed from Brush Shuangqing troubled.
Think the effect is not convenient students can turn off the animation displayed inside.
Install the ROM:
1 will download the zip Brush package do not extract directly into the SDcard
Hold the volume up + power button is turned on, do not release until well into the recovery mode
Recovery, the volume up and down keys / menu Home key to move up and down the power button / Search button to confirm the back key to return to the previous menu level.
Select "Clear all data recovery factory
Select from the SD card, select the Brush package "
6 re-election to select the ZIP file from the SD card "
7 to find just download the zip Brush package confirmed
8 confirmed, Brush, wait about 1 minute to complete.
After brushing, back to the first menu, select "immediately reboot the system restart the phone
10 and then patiently wait for a while, you first start will be relatively slow.
http://www.mediafire.com/?108h4zeap2dcx31
pikachukaki said:
ROM contents
1, using the latest development version of the the MIUI transplant system perfectly stable, change the model for the HTC, modify the boot animation
2, the kernel G major MIUI repair kernel, do not break the sound
3, individuals joined enhance the script and add a few features: turned on by default 80M of Zram default unlock the FPS, you can turn off to enhanced.conf
4, all normal functions, to in addition to FM, the TV-OUT .
5, by adding the RE Manager, Google PLAY, goggles, the Huawei document management, animation acceleration, replace the input method Sogou
Integrated titanium backup and MIUI control center, you can customize the status bar
8, modify the boot theme is self produced IPHONEV1 optimize the camera and power-saving mechanism. Interface fluency can be used to adjust other settings
9 , add ice4.0, window effects, if you feel slow with other settings to modify the animation speed
10, to modify the system wallpaper, system sounds, calls music and other more personalized
11, the boot since the launch of the EQ manager, automatically adjust the sound of music. Listen to music the effect of greatly optimized.
PS: MIUI2.3 now break the sound problem solved, reaches the perfect state, there are some minor issues such as: volume shock and screenshots screenshots screenshots repair will lead to gravity sensing, I have limited skills do not specify a screenshot button . After miui no major updates, and I are working on to release a small update patch package. Can be updated to the OTA, as removed from Brush Shuangqing troubled.
Think the effect is not convenient students can turn off the animation displayed inside.
Install the ROM:
1 will download the zip Brush package do not extract directly into the SDcard
Hold the volume up + power button is turned on, do not release until well into the recovery mode
Recovery, the volume up and down keys / menu Home key to move up and down the power button / Search button to confirm the back key to return to the previous menu level.
Select "Clear all data recovery factory
Select from the SD card, select the Brush package "
6 re-election to select the ZIP file from the SD card "
7 to find just download the zip Brush package confirmed
8 confirmed, Brush, wait about 1 minute to complete.
After brushing, back to the first menu, select "immediately reboot the system restart the phone
10 and then patiently wait for a while, you first start will be relatively slow.
http://www.mediafire.com/?108h4zeap2dcx31
Click to expand...
Click to collapse
Thank you for sharing this rom, but i have some questions: have you tried it? If yes, which are the bugs? Does it work perfect and fast?
MyNameIsKappa said:
Thank you for sharing this rom, but i have some questions: have you tried it? If yes, which are the bugs? Does it work perfect and fast?
Click to expand...
Click to collapse
Im using it right now its very fast and stable with tweaksv5 and kickasskernelizer i get 2500+ on quadrant but i only want to change the long press search key to open the mini menu with send sms and take screenshot option than open camera..anyone knows how i can change it?
Ok i fix it! ^_^ now the only one not working is the screenshot but there an app for that!
so no bugs on this rom?
matteof93 said:
so no bugs on this rom?
Click to expand...
Click to collapse
ss don't work i don't found other bug everything works fine
is this me or its to iOs looking?, and whats about with more statistic? does someones some numbers , on why this is perfect?
blksina said:
is this me or its to iOs looking?, and whats about with more statistic? does someones some numbers , on why this is perfect?
Click to expand...
Click to collapse
You can also change the theme if you like, some people prefer the look of iOS but not the way it performs.
It has only English and Chinese?
sewa2k said:
It has only English and Chinese?
Click to expand...
Click to collapse
Yes, I'm using it right now as we speak. It has both English (which I use) and Chinese.
The only issue is that I can't seem to sync my account.
KayxGee1 said:
Yes, I'm using it right now as we speak. It has both English (which I use) and Chinese.
The only issue is that I can't seem to sync my account.
Click to expand...
Click to collapse
It needs gapps!
pikachukaki said:
It needs gapps!
Click to expand...
Click to collapse
My gapps were bad, thanks!
is there a Russian language in this firmware?
Can I update to this ROM with only wiping cache and dalvik from MIUI 2.3.2?
EDIT: Nevermind, I've tried it and I can confirm that you can't update from MIUI 2.3.2 with only wiping cache and dalvik
borisstone said:
is there a Russian language in this firmware?
Click to expand...
Click to collapse
No, sorry. There are only a few versions of English based on the region, and Chinese.
pikachukaki said:
Im using it right now its very fast and stable with tweaksv5 and kickasskernelizer i get 2500+ on quadrant but i only want to change the long press search key to open the mini menu with send sms and take screenshot option than open camera..anyone knows how i can change it?
Ok i fix it! ^_^ now the only one not working is the screenshot but there an app for that!
Click to expand...
Click to collapse
Thank you! I upgraded to this ROM and i can confirm that is perfect!
Could you tell me please how did you change the long press search key to open another application?
MyNameIsKappa said:
Thank you! I upgraded to this ROM and i can confirm that is perfect!
Could you tell me please how did you change the long press search key to open another application?
Click to expand...
Click to collapse
/system/usr/keylayout/qwerty.kl
change
#key 127 SEARCH WAKE_DROPPED
#key 217 CAMERA WAKE_DROPPED
to
#key 127 SEARCH WAKE_DROPPED
#key 217 SEARCH WAKE_DROPPED
pikachukaki said:
/system/usr/keylayout/qwerty.kl
change
#key 127 SEARCH WAKE_DROPPED
#key 217 CAMERA WAKE_DROPPED
to
#key 127 SEARCH WAKE_DROPPED
#key 217 SEARCH WAKE_DROPPED
Click to expand...
Click to collapse
Thank you, it works !
MyNameIsKappa said:
Thank you, it works !
Click to expand...
Click to collapse
np!!i want it to have the mini menu so i can took screenshots...how is your battery drain??this is my only concern with this rom!
I do not understand a thing, is based on ics?
Kautuak said:
I do not understand a thing, is based on ics?
Click to expand...
Click to collapse
No its based on 2.3.9 miui but has ics animations...its translated from chinese but you can get the picture of what about this rom is!
Running sub-Show Time (screenshot above version)
is not overclocked: 3200 +,
overclocked to 1.4:3900 + points
[For U8800 + updated introduction] This version is the complete package ... need Shuangqing brush into!
* Increased power management
* Fixed some minor problems on the version of
* optimization
* Modify the search key lock screen
on the U8 + fluency * Other updates see above * LEZO join X5 convenient overclocking putting break the sound is perfect repair (from the G major) BOOT permission to crack zipalign optimization script FPS unlock FPS modify the script for the 55 stable transplant to accelerate the running speed of operation to optimize power absolute Province, built-in Jiaru Ou Peng browser built-in sogou input method to improve the quality of photographic and video increase the long-press the power button to pop-up menu to adjust WIFI power to strengthen the WIFI stable 3G user-specific optimization of the script, 3G, 2G are the same to the force to retain all of the services of google (not google, not the Android system) comes with the calendar does not need to visit the google services (also with the festival) other settings LEZO official to set the built-in the Europe Peng browser: Europe Peng browser - free software, please support, do not brush into the first rush to delete, click on the installation once, so for me is also a support, or statistical the Brush amount for this version! [ROM is installed] the end of package: Please use the official or other card brush package as the end of Brush Pack 1 downloaded zip Brush package do not extract directly into the SDcard on
hold the volume up + power button boot, do not release until into recovery mode
. recovery, volume up and down keys / menu, the Home key to move up and down the power button / search button to confirm the return key to return to previous menu.
(4) Select "Clear all data" restore factory
5. select from the SD card, select the Brush package "
re-election to select the ZIP file "
7 "from the SD card to find just download the zip Brush package to confirm
8. confirmed, Brush, wait about one minute to complete.
After brushing, back to the first menu, select "reboot the system immediately and restart the phone
10. and then patiently wait for a while, for the first time you start slow.
Specify: Please double clear, reboot into recovery mode and then a double clear, and finally painted into. (Brush ROM package, please use the G major of Chinese recovery)
Download : http://dl.dbank.com/c0kopvhkv7
Languaje
which languaje?
seryioo said:
which languaje?
Click to expand...
Click to collapse
English - chinese!
pikachukaki its nice that u copy paste from Chinese site and all.. but Most of us can go to Chinese page with Google translate and BRUSH that package
anyway plz dont just copy paste from google translate... try to BRUSH things up...
wtf BRUSH means?
Zaic said:
pikachukaki its nice that u copy paste from Chinese site and all.. but Most of us can go to Chinese page with Google translate and BRUSH that package
anyway plz dont just copy paste from google translate... try to BRUSH things up...
wtf BRUSH means?
Click to expand...
Click to collapse
brush zip = install zip..he means to install the zip from sdcard at cwm!you can get the picture of what this rom is all about..you can test it and if you like stick with it...noone else doing roms here..so we have to use something..if you don't like it stick with froyo!!
Disclaimer: I am not responsible for what YOU do to your tablet...
You assume all responsibility and risk associated with flashing any ROM. Make a backup!!!
ICS 4.0.3 for our xPAD-70 (Type 1 iDx7) and xTAB-70 (Type 2 iDx7).
I must say, that these roms very fast and stable.
What's Working:
camera
touchscreen
physical buttons
wifi
audio, ringtones, notifications, alarms
microphone
root
adb
sdcard
sensors
usb host
everything
Install instruction/download links:
1. Connect the home charger to the Tablet PC. Charge the battery.
2. Download the compressed file to your PC/Laptop.
3. Create an empty folder on your desktop PC / laptop. Extract the downloaded .zip file into this empty folder.
4. Copy the four extracted files ("update.zip", "uImage_recovery", "uImage", "u-boot-512M-UartB.bin","factory_update_param.aml") to the root folder of an empty microSD card (2GB or higher). I you want to wipe and install manually, just delete the factory_update_param.aml file and boot into recovery without that.
5. Safely remove (disconnect) the microSD card.
6. Turn off the Tablet PC, but keep the home charger connected to it.
7. Insert the microSD card into the Tablet PC. After this step, don't pull out the microSD card.
8. Press and hold down the "volume up" button.
9. While holding down the "volume up" button , press and hold down the "power on" button for 6-9 seconds, and release the buttons after the last "upgrading... please wait" like messages.
Navigation inside the menu:
- Volume up and down buttons can be used to select a menu item.
- The "back" button (which is between the "home" and "menu" buttons) will activate a menu item.
10. Dont forget to hit the thanks button
Downloads:
==============
xPAD-70 (Type 1 iDx7) ICS 4.0.3 :
==============
ROM:http://www.mediafire.com/?1iqt5f1uamtrw2f
==============
xTAB-70 (Type 2 iDx7) ICS 4.0.3 :
==============
ROM: http://www.mediafire.com/?gtlqgdk33bhhtj2
===============================
ROOT packcage for ICS roms, xPAD/xTAB(apply after installig the upgrade) :http://www.mediafire.com/download.php?pfrrx7ja502qz2j
===============================
Older ROMs:
soon...
The language could be hungarian, but you can change to english with these settings:
1. Beállítások (its the hungarian word for Settings. Its in the menu) 2. Nyelv és billentyűzet (means Language and keyboard) 3. Nyelv kiválaszása (Select language) 4. Chose the English languge from that list. Thats all.
Copyright:
=========================================
[email protected]___________________
=========================================
2 links for xPAD-70 ?
murigny64 said:
2 links for xPAD-70 ?
Click to expand...
Click to collapse
Sry, i corrected, the second is the xTAB-70 ICS 4.0.3
I can't get BBC I player or Netflix to run with this rom. I get sound but no picture. Does anyone know why. Avi files run fine. Otherwise the from is very good. Been following this on the Hungarian forum but relying on google translate. Only other issue is the inertia scrolling.
Cheers carrotts
Sent from my xPAD-70 using xda premium
I have no idea about Netflix. Is seems to be working with CM nightlies. There is a XDA thread about netfix. I hope there is a solution for this.
This is the link: http://forum.xda-developers.com/showthread.php?t=1076150
The inertia scrolling fix appears in the next rom update. I hope.
cant use boot menu
Hi when i restart in boot menu i cant navigate it
When i press any button it reboots,
Anyone know if a setting needs adjusted?
As really needs updated
I got a question too....
I copied the files on SD Card but when i Press "volume Up" and "Power" Butten i get the upgrade Message and after the secon one he starts flashing but he doesnt start. i only get the waycom logo and the he reboots ....
Can someone help me?
Hello,
Do you have copy of ROM for similar device xTAB-70i ?
I am looking for Wayteq_xTAB_70i_20120620.zip.
Hello everybody! I have searched for all the topics talking about How to your S III to Lollipop 5.1.1? So i'm here today to show you the complete steps to:
I - Root your Phone.
II - Flashing the recovery Mode.
III - Installing the ROM in your device.
IIII - Enjoying the Lollipop 5.1.1
HTML:
WARNING:
-I'm not responsable for any damage can caused in your device or losing your SD Card. Everything is working fine in my device.
I - Root your phone:
Rooting your device is so easy that means to give your OS a new options contains Flashing ROMs
So to root your phone you need a PC and a software called Odin. First search on it and download it
After downloading software: to open it:
1) Right Click on the Winrar ZIP.
2) Choose "extract files" option.
3) Then you'll have a folder open it.
4) Right Click on Odion.exe (application)
5) Choose "Run as administartion".
6) The Proogram will be opened.
7) Next to complete the rest of rooting you should get the access to download in your device by :
_Click the "-" Volume button + Power Button + Home Button together for a little while.
_ Then click "+" Volume Button.
8) Now Connect your PC with your device using USB cable then wait windows installs drivers (for 10 or 20 secs) and you'll see a blue case in the left corner upper.
9) Click on "PDA" Button and search the file "CF-Root".
10) Click on "Start" button after few minutes Odin will show in the up of the bleu square "RESET!"
If everything is done like the above steps then Reboot your phone and remove the USB cable . then you'll see a new application added called "Super SU" that means your device rooted successfully
Note: if you are not seeing the "CWM" on your device that means the "ClockWorkMod" application not installed yet so you must download it by the following steps:
1) Go to the PlayStore and write in the search bar: "Rom Manger".
2) Then you'll see "Rom Manager" application download it.
II - Flashing the recovery Mode:
So after you downloadthe clockworkmodmod application now you have to install the recovery on your device to do that:
1) Open the applicaion installed.
2) Choose the first option "Flash ClockWorkMod Recovery".
3) Choose your phone's name from the list once you find it, click on it.
4) Once the installing finished, Power off your phone
_Click "+" Volume Button + Power Button + Home Button simultanity (to ckeck the result).
And now the last part of all this.
III- Installing the ROM on your device:
Note: you must have a SD Card of 2GB or more
First thing to install the ROM you need to download GAPPS (Google Apps) and the ROM
Why we are needing GAPPS?
GAPPS is the complitation of google Apps on the new ROM.
You can download them from any website
After downloading them as a Winrar ZIP on your PC copy them and past them on your SD Card. Now to flash everything and install Lollipop on your Android device:
1) Put your SD Card on your device.
2) Click on "+" Volume Button and the power button and the home button in the same time.
3) The ClockWorkMod Recovery will open
_Go to "Wipe data/cache " option and click on it by the power button, then Select YES.
_ The Same thing in "Wipe cache" option.
Currently your device is wipped or formatted
Now Flash Your ROM:
_ Go to "install ZIP from SD Card " option, Select your ROM that u installed it on your SD Card by the power button.
_then the same thing to installing GAPPS.
Once Everything is done and you see "installing complete", Reboot your system now (open your device)
Finally your device is upgrading to Lollipop 5.1.1!
So yeah! that's all, Thank you for your support and we hope this work be helpful!! :laugh:
Reb0t said:
Hello everybody! I have searched for all the topics talking about How to your S III to Lollipop 5.1.1? So i'm here today to show you the complete steps to:
I - Root your Phone.
II - Flashing the recovery Mode.
III - Installing the ROM in your device.
IIII - Enjoying the Lollipop 5.1.1
HTML:
WARNING:
-I'm not responsable for any damage can caused in your device or losing your SD Card. Everything is working fine in my device.
I - Root your phone:
Rooting your device is so easy that means to give your OS a new options contains Flashing ROMs
So to root your phone you need a PC and a software called Odin. First search on it and download it
After downloading software: to open it:
1) Right Click on the Winrar ZIP.
2) Choose "extract files" option.
3) Then you'll have a folder open it.
4) Right Click on Odion.exe (application)
5) Choose "Run as administartion".
6) The Proogram will be opened.
7) Next to complete the rest of rooting you should get the access to download in your device by :
_Click the "-" Volume button + Power Button + Home Button together for a little while.
_ Then click "+" Volume Button.
8) Now Connect your PC with your device using USB cable then wait windows installs drivers (for 10 or 20 secs) and you'll see a blue case in the left corner upper.
9) Click on "PDA" Button and search the file "CF-Root".
10) Click on "Start" button after few minutes Odin will show in the up of the bleu square "RESET!"
If everything is done like the above steps then Reboot your phone and remove the USB cable . then you'll see a new application added called "Super SU" that means your device rooted successfully
Note: if you are not seeing the "CWM" on your device that means the "ClockWorkMod" application not installed yet so you must download it by the following steps:
1) Go to the PlayStore and write in the search bar: "Rom Manger".
2) Then you'll see "Rom Manager" application download it.
II - Flashing the recovery Mode:
So after you downloadthe clockworkmodmod application now you have to install the recovery on your device to do that:
1) Open the applicaion installed.
2) Choose the first option "Flash ClockWorkMod Recovery".
3) Choose your phone's name from the list once you find it, click on it.
4) Once the installing finished, Power off your phone
_Click "+" Volume Button + Power Button + Home Button simultanity (to ckeck the result).
And now the last part of all this.
III- Installing the ROM on your device:
Note: you must have a SD Card of 2GB or more
First thing to install the ROM you need to download GAPPS (Google Apps) and the ROM
Why we are needing GAPPS?
GAPPS is the complitation of google Apps on the new ROM.
You can download them from any website
After downloading them as a Winrar ZIP on your PC copy them and past them on your SD Card. Now to flash everything and install Lollipop on your Android device:
1) Put your SD Card on your device.
2) Click on "+" Volume Button and the power button and the home button in the same time.
3) The ClockWorkMod Recovery will open
_Go to "Wipe data/cache " option and click on it by the power button, then Select YES.
_ The Same thing in "Wipe cache" option.
Currently your device is wipped or formatted
Now Flash Your ROM:
_ Go to "install ZIP from SD Card " option, Select your ROM that u installed it on your SD Card by the power button.
_then the same thing to installing GAPPS.
Once Everything is done and you see "installing complete", Reboot your system now (open your device)
Finally your device is upgrading to Lollipop 5.1.1!
So yeah! that's all, Thank you for your support and we hope this work be helpful!! :laugh:
Click to expand...
Click to collapse
Hi Thanx, where to download the ROM package from?
ukchy123 said:
Hi Thanx, where to download the ROM package from?
Click to expand...
Click to collapse
Hi, Sorry but i can't add outside links that's why i didn't put links to download. (you know XDA rules :crying: )
Lollipop ROMs
[INDEX] Galaxy S3 - ROMs, Kernels, MODs, GUIDES [19/01/16]
Look there, to find a Lollipop ROM for S3.
Yes you can find there.
Trafalgar Square said:
[INDEX] Galaxy S3 - ROMs, Kernels, MODs, GUIDES [19/01/16]
Look there, to find a Lollipop ROM for S3.
Click to expand...
Click to collapse
yes you can find in this link.