I tried to download tmobile gs5 from 5.0 to 4.4.x and somehow my simcard is now not being detected. I upgraded back to 5.0 with odin. the firmware is crashing a lot. I am going to try to restore the efs and imei with kies but I need by serial.
The problem is my status menu in the about menu is completely white blank. Also the #06# code does nothing.
I tried to get the serial from ADB using twrp but that isn't the serial, kies won't accept it. What do I do?
Related
I was trying to upate the SUBinary and it told me to reboot. As soon as I did I get a message saying "Custom Binary Blocked by FRP" and a red text saying "Secure Fail : Kernal" help me.
It has something to do with your Google account being logged into the phone.. samsung can send signal to reset it but they won't if it's been rooted etc still trying to make sure reflash omg the phone with original rom would make it worse or not. Or maybe just reflash in the kernal. I'm on t mobile but can only find original rom on t mobile same network but we will see. I'm on my fiance a accident messaging from her phone lol or maybe just reflash the kernal the whole problem for me is I don't have a computer to try to reflash from what someone told me I may try to reflash with odin 3.90 with a tar file to the exact model number
Solution
I had the exact same problem as you but i found a fix
i know this is a very late response but who knows maybe some people will run into it
First of all you will need
-odin3
-samsung usb drivers
-g530w tar md5 file find yours here (im telus variant but bell worked for me)
https://1fichier.com/dir/OgrN3QNx
or
https://www.youtube.com/watch?v=N33i15UVCyA
g530w Pit file here
https://drive.google.com/file/d/0BzyeAt2hy6Xea0VPUDBLOWY5WU0/view
or
http://www.sammobile.com/forum/showthread.php?t=30863
and use odin to flash your phone while its in download mode connected to your computer
skip to 1:28
https://www.youtube.com/watch?v=6lki9ei2-WM
sorry for super messy post i rarely post things i hope this saves you time
This is the best and quick fix for FRP Lock
...Just follow the link: https://forum.xda-developers.com/grand-prime/help/custom-binary-blocked-frp-t3266961/page3
Worked for my SM-G530W
I had the same problem, and i used Kies3 (not compatible with my phone anyway), but if you go on toolbar to "TOOLS", "Firmware Upgrade and initialisation", it asks you for your device model (for mine i typed SM-G530W, and then it asks you for device serial number (S/N) found under the battery by the IMEI number. After this, follow on screen prompts (Restart your device in Download mode/ PDA, connect USB cable, etc), and let the software download and install (factory rom); After your device restarts, you are good to go (sometimes if it gets stuck on booting, remove battery for few second and start again.) Now you have to go back and set up everything you want, including re-rooting your device... Good luck. (My device is Galaxy Grand Prime SM-G530W Factory unlocked rom, Android 5.11.
Hey guys, my device lost it's IMEI number when the battery died. When i check with *#06# i get a message with "null" on the screen, and i constatly get a popup that the LG keyboard has stopped. Is there anything i can do to get the phone working again? Just to mention my phone is not rooted.
Thanks
Edit: when i tried to put the phone in download mode i get boot sertification error and my phone is recognized as storage device with two folders called "image" and "verinfo" on device manager it's recognized as "LGE AndroidNet USB Serial Port" How can i restore download mode? :/
try this: http://en.miui.com/thread-245598-1-1.html
I somehow managed to boot it in download mode via "QPST" and reflash the stock ROM, but i have a wierd bug, everytime my battery dies or i turn off the phone the IMEI get lost again and i have to flash the ROM to get the phone work again... If anyone know how to fix thiss issue let me know
Thanks
Dears, I hope someone has any idea about what I can do...
Yesterday I had the G6 with fulmics ROM installed. I tried to make a factory reset with TWRP to clean everything was fine but I was not able to get out of the recovery. I was stuck in a recovery bootloop...
I tried this command from another thread:
Code:
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/misc
and I was able to get out of recovery, but now I was stuck at bootloop with the message "Your device is corrupt"
I let the battery discharge completely then I pressed UP button and inserted USB to my PC and I was in Download Mode.
With LG UP and Uppercut I loaded the image of the stock firmware I was having before and now the G6 is booting correctly when I have no SIM card inside.
If I put the SIM Card the process com.android.phone stops working continuously and I cannot have network connection...
I browsed the phone informations without SIM Card and I still have the correct IMEI inside but, the IMEIsv is 00 and the S/N of the phone is empty...
So, do anyone have any idea of what I can do to have it working back again?
I cannot unlock the bootloader again because the unlock.bin is related to the IMEI and S/N and one of them is gone....
Authorized service should repair it free of charge. By the way, tempering with S/N etc. is illegal and not supported by this community.
oh good, I was thinking I destroyed it completely. Tomorrow I will bring it to the LG service. Thank you!
So I got a lg k8 2017 m200 .Used for a while but yesterday i did a reset and now imei is gone. I have tried the following:
1)Unable to root it.
2)Found no custom rom or custom recovery.
3)EFS Pro said successfully IMEI written but upon restart its still null.
4)Tried qpst but mobile is unknown and keeps disconnecting.(I enabled port check test and usb debugging)
5)Flashed stock rom 3 Times.
6)Reset it 8 Times.
9)Also wasn't able to use diag port command due to lack of superuser in adb.
None of all worked so can anyone help please. Reset of functionality is good. So i also turned off my lg and press vol up and vol down along with power button and it displayed imei there.
"So i also turned off my lg and press vol up and vol down along with power button and it displayed imei there."
Wait, it displays the correct IMEI there?
You said your IMEI is gone. but is it blank or its written "unknown" there? Or the IMEI is just wrong?
I had a problem with IMEI some years ago on a LG E610f and I fixed it by using LG tools back then. I still have the version 9.5 here and I doesnt support your phone, but Maybe the latest version supports your phone.
Hi
I had a working & rooted (Magisk) Device and tried to fix a problem with an App, requiring unrooted device.
I disabled OEM unlock accidently, so I was captured in FRP lock after I had to reboot the A5.
I replaced my USB Flex Module, as device could not communicate with PC via USB anymore (this issue is definitively fixed).
I tried to do a emergency flashing with Samsung's Smart Switch, but I didn't work, as my device was not recognized/supported by Smart Switch.
I tried to flash an old Firmware (known to be working before) with ODIN, resulting in a Rev. error.
I tried some other Firmwares and accidently checked "NAND Erase", so I ended up with a soft bricked device. Flashing recent Stock Firmware didn't change anything.
I managed to download a weird 4-files Firmware (BL, AP, CP, CSC) version and a appropriate PIT file and flashed this via ODIN, so I finally got a bootable device back.
That enabled me to remove OEM lock and activate USB Debug.
Next I was flashing TWRP and restoring a recent backup from SD card. Everything looked fine but I couldn't make a call due to phone didn't register in network (IMEI and S/N are shown in Status menue and look good).
I flashed 2 Stock ROMs (A510FXXS8CTI7 & A510FOXA8CSF3) to get a working GSM network. -> no change
I installed "Network Cell Info Lite" app to validate radio is working correctly -> positive.
Anything else I can try?
Is there any kind of logfile, where I can read what happens during GSM network registering?