Hi - sorry if this has been answered or is in the wrong place. I have an XDA Mini S which is unlocked. I am trying to connect to the Internet via my BT home hub. The XDA visualises the home hub and says it is connecting but after several minutes it says not connected then tries again. Have changed the power setting so that the wifi has the best power setting but it still will not connect. Any ideas please - am not great technical wise but am far from stupid so should be able to try most things. Thanks from a hopeful newbie!!
What security is on the HomeHub? I'm not 100% certain but maybe the phone won't do WPA encryption.
Also, if the HomeHub is set to 'G' only mode, you may need the hack for the Mini-s to get it to run in the same mode.
Have a look at this thread.
Post 3 has the link and tells you what to do. It does work as I can confirm.
http://forum.xda-developers.com/showthread.php?t=254420&highlight=wifi
Hope that helps
Hi, I've some problem with wifi connections. I own a lynksis wag54g2 wifi router. I can establish a connection, but after some times (it's not standard, it may vary), my device disconnect from the router and it's not able to reconnect. All that i can do is plug off my router (i take off the ac adapter) and when it's up again my phone can connect. it's very frustating, but i don't know what to do? i've tried setting something in wifi preferences' on my phone but nothing change. i've also flashed my firmware to the new one, hoping that it could fix that problem, but it didn't. someone could help me?
you can update the firmware to a newer one. this would fix your problem.
forum.xda-developers.com/showthread.php?t=781149
Hello.
I have a problem with WIFI on Galaxy 5 (i5500)(Europa) too. They have already changed my phone with new one, but the issue remains. So, for the second time now, I was able to connect my phone to my router for the first time, but after the first interruption or disconnection of WIFI I could not access to wifi anymore.
When I enable wifi in the phone starts ''connecting'' but then reports ''interrupted'' eventhough the signal is recognised as strong.
Firmwire version is the latest available. Router is encrypted with WPA2. Also I can access to router with my HTC Tattoo (Click).
Does anyone know the solution?
I have a decision to make(today), becouse If there is no solution to this I will change to another phone as I still can (Galaxy Spica).
Advise please.
Thanks a lot
What router do you have? have you tried with any other wifi network? i said that because my have this problem only with my router, and not for example with my girlfriend's one.
I found a little fix for my router, linksys wag54g2: open up the config page (192.168.1.1), go for wireless tab, select protection page and click on save settings. that reload the router and my phone is able to connect again.
Hi.
Thanks for your advice. There is some problem with router.. When I restart router the wifi on the phone works until swiched off or interruption becouse being out of range. When I try to connect to wifi again does not work unless I restart router again. ..catchy.. Interfering with mobile connection also makes the drop of wireless connection on my computer, so I need to restart router. I don't know the permanent solution. If anyone has any idea how repair this forever please let me know.
Best,
Thanks
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
I have just read similar post on another thread and replied find it here
I ahvent installed anything, perhaps its to do with the handset if its locked to a particular carrier? just a guess and a question...
cheers
helper
try to use static ip!!
CaptainTim said:
Hi,
Here is my problem with my wifi with the galaxy 550.
For security reasons, my wifi network can't be detected (invisible). If i want to connect a new device by wifi, I must first set my wifi visible and then register my device.
Then I set my wifi as invisible again and the device can connect automaticaly to my network without "seeing" my wifi network.
Problem is that once i set my wifi as invisible again, my galaxy fail to connect because the network is unvisible.
Is there anyway to fix this ?
Click to expand...
Click to collapse
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
HeiDuDer said:
try to use static ip!!
Click to expand...
Click to collapse
Didn't work :/
Super1285 said:
I have an answer! Hope it works for you.
My provider gave me really easy solution for wifi connection not connecting even though it was my own network with all the right info. It worked great the first time, then for some reason the phone locked in the "off" position. So I removed the battery to reboot (later learned the right way by pushing the volume button on the left and the power button at the same time)
Anyway, try this....
turn phone off - remove battery - remove sim card - wait a few minutes - reassemble - then the network should log on with no problem.....Good luck!
Click to expand...
Click to collapse
Didn't work neither.
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
htc tattoo
hellllllllllllllllllllllllllllllllllllllllllllllll llllllllp hellllllllllllllllllllllllllllllp
heeeeeeeeeeelp
helppppppppppppppppppp
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times
I have same problem after upgrading to 2.3.5 Wi-Fi shown as it is Active, but it is turning off and on and scaning and off again all times>>>>>>>>>>>>>>
I just installed PROMETEUS ROM so far I'm loving it, good job!!
I have only 1 concerning problem, every time i connect to a same WiFi adapter (home) i need to reenter my password instead of my device remembering the password & connect to it automatically. Can anyone help me to Reeves this problem?
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Hi , I am new here and I have this little problem. My SCH-I545 with Android version 5.0.1 shows wifi connection to my access point ( Got IP address) All my other devices that connect to the web thru the same AP are working . When I try to connect thru WiFi, it will not reach destination, not on browser, not to GooglePlay, my location can't be established....very annoying. It started today...it was working yesterday. I reset the phone to factory default and the problem did not go away. Not sure what to check right now.
Any help will be appreciated.
Thank you
http://forum.xda-developers.com/galaxy-s4-verizon is to place to ask, as there are more people familiar with your device there. This is the international S4 forum.
I've posted it in a few places so I may as well ask here:
Trying to find a fix as it's rather annoying: I can connect to my Phantom 3 but as it has no internet connection, android asks to stay connected and also asks if to remember and not ask again. I can set it to stay connected and it works, if I also tick to not ask again it will connect, but on attempting to reconnect on the next occasion, it will show as its connected but won't actually work and it requires forgetting and repairing to the network. Not a long job but rather annoying. It seems to be a Lineage bug as stock firmware is fine, my Note 2 with a LOS ROM has the same issue