Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you
Valerc said:
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you
Click to expand...
Click to collapse
unfortunately I do not have a backup of the SMA-R.
Of course the GW01 and NO.1 G3 firmware have the bluetooth function but only 4.0, while the SMA-R also has Bluetooth 3.0 that I think drain the battery slowly.
Happy Xmas
Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?
Emirio said:
Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?
Click to expand...
Click to collapse
hello , it's happened to me too , i resolved only with turn on , let the battery drain to 0 , connect to pc , turn it on , press file manager , swiping the screen , go to setting and reset all the watch , it worked to me
Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.
Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!
Matuskaur said:
Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!
Click to expand...
Click to collapse
You may need this tutorial.How to update MTK smartwatch
JKSurf said:
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.
Click to expand...
Click to collapse
Hi, i wait somebody who can save the sma r firmware.
I hope you can make it, because my is bricked.
Here is the step by step guide to make it.
https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
If it is working, please send the firmware here to this forum.
Many thanks!
I also have the SMA-R without its original frware, it happened the same to put the faces, and I had to put the No.1 G3 but it does not work well, it lowers very fast the capacity of the battery and besides it does not work The heart meter. If someone can pass the SMA-R firmware for the whole community? We would be very grateful to you
While waiting, can someone tell me where the gw01 ulefone firmware can be downloaded?
Update, is here in case anyone needs it:: Forum: xda-developers Smartwatches Misc Other SmartWatches Ulefone GW01 smartwatch Puesto # 53
Pd: I have requested by mail and by your facebook to SMA to send me the firmware, if they send it I would post it in this forum
Yesterday, after two days i received it, my SMA-R doesn't work anymore. The display is always black... Do you know if there's a way to fix it? Thanks
Install the uplink firmware qw1 that goes very well. Until someone puts sma firmware
Do you have a tutorial? I don't know how to do it
Sorry for not letting me put the link to the page, but follow this route and there you can find the firmware and manual
Update, is here in case anyone needs it::
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
--------Ulefone GW01 smartwatch Puesto(# 53
Manual
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
.............Ulefone GW01 runs with firmware of No.1 G3 by Tornator
Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again
alfhas said:
Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again
Click to expand...
Click to collapse
I know GW01 and G3, but what is SMA-R ? Will you brick your watch if you don't flash the firmware successfully.....Think about Pablo they recommended us not to flash other watch firmware, they might make your watch no longer work.
The sma-r is another smart watch just like g3vo gw1 ... all use similar hardware and firmware is compatible ... If you can repair or reset the clock when it is broken, you can always put another firmware and recover The clock even with different system of these three compatible.
Unfortunately I use a Mac so I can't use FlashTools, even using Virtualbox to emulate Windows... Do you know if there's some other software for mac? thanks
Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.
Original SMA-R Firmware
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...-benzóico.
---------- Post added at 07:09 PM ---------- Previous post was at 07:06 PM ----------
newbiesk said:
Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.
Click to expand...
Click to collapse
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...
Hi, i tried to instal new watchface on my smartwatch. after succesfull installation and the watchface status is installed, the new watchface did not show up in my smartwatch. I tried using both fundo and mediatek app and the result is the same. Any idea why?
I have this watch and the same happen to me. Did anyone knows why?
One thing I noted, this watch has 12 watchfaces pre installed. Maybe it cannot display more than that.
Has anyone been able to remove a watch face to be able to load a new one.
No1 DT98 Watchfaces issue
Having the same issue. Able to 'install' the watchface via MediaTek, but then doesn't show up on dial selector...
Anyone with a way around this - help would be very welcome....
Where did you find the watchfaces?
Someone tried to remove one of the preinstalled WF to free up a slot?
the same problem anf from me i cant install watchfaces,,,and i send email to company and ,,,,1)my questions to company is:..hello i have a few days the model dt98 but i can not install wachfaces or vxp faces...the firmware is XM027_C19_V1_B_2019_0929-3...i tested the app Mediatek SmartDevice_vV1.7.6_ but nothing,,,,, says ok install accsses but dont install if i check the smartwatch,,,,i found the other firmware G8vxptest for vxp watch faces but it is not impossible install this....please send me another firmware who working and i can put watchfaces and vxp files or give me the downloaded link firmware...i am waiting your answer......thank you
And the answer from company ::hi DT98 can't install extra watchface due to the memory and why you do that, my friend?
2)my question again::because i want make some custom vxp watch faces and some vxp football faces....please its impossible.. i no that in forums,, i read with old firmwares its impossible,,,tell me what firmware is this?..its an old firmware??or some new firmware??or firmware from another model who is the same??i am waiting your answer..thank you
the company answer again: Our old android watch can support install watchface but new model like DT98 can't. thanks for the understanding.....
maybe its big fools......the guys
---------- Post added at 03:41 PM ---------- Previous post was at 03:34 PM ----------
must found other firmware from another model or another mark who have the same parameters for hardware and software ,,,,,,,,,,only this solution it is for this model dt98,,,if someone found another firmware post it here..
Issues
Hi.
I'm looking for software update because my dt98 does all...worng (steps, heart rate, distance )
Hi dhiotis,
I think you will be very disapointed: dt98 is not a smartwatch but a ... toy watch! Everything is fake: steps, heart rate, O2... The only thing witch is real is the time!
For example: my pillow has 98% O2! And 72/min heart rate!
Sorry but this is not a firmware problem...
At least, you made me laupgh
But I hope that some day and some how, the software could be updating.
Give up, everyone, there's no way to change a watch's face
MDK125 said:
Give up, everyone, there's no way to change a watch's face
Click to expand...
Click to collapse
Is there no way to replace one face with another?