I have flashed my galaxy S with ROM 2.3.3 XXJVK, odin finished, and rebot my phone into recovery mode where i got this error
E: failed to mount /dbdata
E: copy_dbdata_media: can't mount /dbdata
so i select just restart, and phone start.. So i don't know what this mean. Anything wrong? Cause my phone is working on this rom alright, didn't find problems
Only strange thing i find, when i tried to install doc rom it doesn't install.
I selected:
*Wipe version
*Chainfire's Kernel
*All Apps with default Samsung TW Launcher
*XXJVK Stock Theme + AOSP lockscreen + Shut Off Animation
But none of that install after in say in recovery COMPLETE..
if the phone is working fine, dont worry about it.
if it starts to cause issues, you need to flash 'dbdata' thru odin, or a firmware that contains it, such as JM8 or Darkys 9.2 resurrection.
ive had this issue a few times, leading me to boot loops. so if you experience them, you will know why.
or, a more simple solution,
CLEAN YOUR DEVICE BEFORE FLASHING.
i think it is written in every guide,
erase cache, erase internal storage, erase user data!
then flash, and there will be no problem, no error.
also, disable all lagfixes!
nonyhaha said:
or, a more simple solution,
CLEAN YOUR DEVICE BEFORE FLASHING.
i think it is written in every guide,
erase cache, erase internal storage, erase user data!
then flash, and there will be no problem, no error.
also, disable all lagfixes!
Click to expand...
Click to collapse
if any error appear i will do that and flash again.. But i don't use any lagfixes..
Please help.
I'm stuck on bootloop after flashing stock XXUAME2 rom with Odin.
The reason is - I checked/enabled the "Nand Erase All" before flashing. I know, stupid. But what should I do now to unbrick it?
Well, firstly I successfully flashed stock ME2 over my MDM with Odin. But all my stuff was still there (apps, huge files and so on - which I already backed up on my pc) and my memory was almost full. So I wanted to clean everything before flashing TWRP and a custom rom. And then I checked the freaking Nand Erase.
Now, I tried to flash TWRP and do a factory reset/full wipe, but couldn't even enter into recovery mode (vol up+home+power) - it shows "GT-I9505 logo" with small blue text "recovery mode" on top of the screen and then it quickly returns to power off state (with battery charging animation).
The Download/Odin mode is working, thank God. But flashing a stock rom from Odin doesn't solve the problem of bootloop.
I've read that after a nand erase it is needed to flash a PIT file to fix it. Any suggestions where to download it? What version of a PIT file should i look for?
Thank you, guys in advance.
I dont think it will do the job.
I think that nand erase has wiped partitions data.
Any way try with pit. It is in my signature. (Choose right pit file)
Sent from my Galaxy using xda premium
samersh72 said:
I dont think it will do the job.
I think that nand erase has wiped partitions data.
Any way try with pit. It is in my signature. (Choose right pit file)
Sent from my Galaxy using xda premium
Click to expand...
Click to collapse
Thank you, but flashing PIT didn't work - I made everything according your instructions. Still bootloop.
Maybe I need to reflash Bootloader/Phone/CSC?
jzxe10 said:
Thank you, but flashing PIT didn't work - I made everything according your instructions. Still bootloop.
Maybe I need to reflash Bootloader/Phone/CSC?
Click to expand...
Click to collapse
U need someone to extract partitions for you to flash, except what is included in the stock firmware. Do you have a backup for efs partitions?
I have param partition fir i9505 to flash. I will attach it soon
Sent from my Galaxy using xda premium
samersh72 said:
U need someone to extract partitions for you to flash, except what is included in the stock firmware. Do you have a backup for efs partitions?
I have param partition fir i9505 to flash. I will attach it soon
Sent from my Galaxy using xda premium
Click to expand...
Click to collapse
Thank you! I will wait for you to upload it . And could you please tell how to flash these partitions?
unfortunately I never made any partition backup.
jzxe10 said:
Thank you! I will wait for you to upload it . And could you please tell how to flash these partitions?
unfortunately I never made any partition backup.
Click to expand...
Click to collapse
go into recovery, if it is possible, wipe data and cache, then flash with odin the stock firmware in pda with the pit file in pit window. just check auto reboot, f.reset and re-partition. when it say "pass" remove battery, re-insert it, go to recovery, wipe data and cache reboot.
im afraid that ticking "nand erase all" in odin, usually lead to a hard brick!
samersh72 said:
before flashing param.tar. go into recovery, if it is possible, wipe data and cache, then flash with odin the stock firmware in pda with the pit file in pit window. just check auto reboot, f.reset and re-partition. when it say "pass" remove battery, re-insert it, go to recovery, wipe data and cache reboot.
if it didnt work, unzip attached file and flash "param_I9505.tar" in pda. (without pit file)(dont tick re-partition)
im afraid that ticking "nand erase all" in odin, usually lead to a hard brick!
Click to expand...
Click to collapse
Duuude! It worked!!!!
Even without flashing param partition. Just the first step:
go into recovery (I flashed CWM with Odin), if it is possible, wipe data and cache, then flash with odin the stock firmware in pda with the pit file in pit window. just check auto reboot, f.reset and re-partition. (then it went into bootloop as usual and after a moment Odin said "pass") when it say "pass" remove battery, re-insert it, go to recovery (the recovery at that moment returned to stock), wipe data and cache reboot.
Click to expand...
Click to collapse
And ta-daaa! It works now. Ahhh! that was close! )))
You should write this instruction for [email protected] like me.
You can't imagine how I'm grateful to you!
jzxe10 said:
Duuude! It worked!!!!
Even without flashing param partition. Just the first step:
And ta-daaa! It works now. Ahhh! that was close! )))
You should write this instruction for [email protected] like me.
You can't imagine how I'm grateful to you!
Click to expand...
Click to collapse
glad to hear that....
Never and Ever tick "NAND ERASE ALL" in odin
next time, if you want to erase data, do it from recovery.
samersh72 said:
glad to hear that....
Never and Ever tick "NAND ERASE ALL" in odin
next time, if you want to erase data, do it from recovery.
Click to expand...
Click to collapse
Sure! And for the next time what exactly should I pick from recovery to erase everything? apart from wipe data/cashe/factory reset? There are also some format options in advanced menu (format system, data, cashe, dalvik cashe and so on). Or I should not touch anything there anymore? )))
jzxe10 said:
Sure! And for the next time what exactly should I pick from recovery to erase everything? apart from wipe data/cashe/factory reset? There are also some format options in advanced menu (format system, data, cashe, dalvik cashe and so on). Or I should not touch anything there anymore? )))
Click to expand...
Click to collapse
no need for format system..
if you format system, then it must be a ready custom rom in your sd card to flash via cwm. or you must flash stock via odin.
wiping data and cache and dalvik is enough
Thanks very much everyone who partisipated in this thread! You saved me a lot of time and a lot of effort! I was stuck in the boot screen because i formated the whole system. I tried that solution and worked for me! Thanks very very much!
jzxe10 said:
Duuude! It worked!!!!
Even without flashing param partition. Just the first step:
And ta-daaa! It works now. Ahhh! that was close! )))
You should write this instruction for [email protected] like me.
You can't imagine how I'm grateful to you!
Click to expand...
Click to collapse
I got the same problem but it didn´t work. Where can I find the param_i9505 file?
the stock recovey isn´t working, i can flash CWN but when it stuck because it can´t mount sdcard.
please help.
gastipies said:
I got the same problem but it didn´t work. Where can I find the param_i9505 file?
the stock recovey isn´t working, i can flash CWN but when it stuck because it can´t mount sdcard.
please help.
Click to expand...
Click to collapse
you dont need param file just redo this:
go into recovery, if it is possible, wipe data and cache, then flash with odin the stock firmware in pda with the pit file in pit window. just check auto reboot, f.reset and re-partition. when it says "pass" remove battery, re-insert it, go to recovery, wipe data and cache reboot.
Click to expand...
Click to collapse
if stock recovery didnt work at first, flash any custom recovery and make the wipe.
it is important to use pit file with the firmware.
samersh72 said:
you dont need param file just redo this:
if stock recovery didnt work at first, flash any custom recovery and make the wipe.
it is important to use pit file with the firmware.
Click to expand...
Click to collapse
I try it but it didn´t work. CWM give a error when it try to wipe data, "error can´t mount sd card"
gastipies said:
I try it but it didn´t work. CWM give a error when it try to wipe data, "error can´t mount sd card"
Click to expand...
Click to collapse
flash pit alone
samersh72 said:
flash pit alone
Click to expand...
Click to collapse
Didn´t work, still looping.
samersh72 said:
flash pit alone
Click to expand...
Click to collapse
Hi I change the pit file to other and after the process it allow me to enter in the stock recovery mode. Without any errors in odin.
The stock start with this error mesage:
#manual mode#
-- apling the csc code: BTU
sucefull aplied multi- CSC ----
E: failed to mount /data (invalid argument)
can´t mount /data (invalid argument)
E: faliled to mount /data (invalid argument)
The same problem in CWM custom recovery.
I think i need to mounth the sdcard or /data but i don´t know how to do it.
please help...
---------- Post added at 07:01 PM ---------- Previous post was at 06:51 PM ----------
gastipies said:
Hi I change the pit file to other and after the process it allow me to enter in the stock recovery mode. Without any errors in odin.
The stock start with this error mesage:
#manual mode#
-- apling the csc code: BTU
sucefull aplied multi- CSC ----
E: failed to mount /data (invalid argument)
can´t mount /data (invalid argument)
E: faliled to mount /data (invalid argument)
The same problem in CWM custom recovery.
I think i need to mounth the sdcard or /data but i don´t know how to do it.
please help...
Click to expand...
Click to collapse
problem solved i just do wipe in sotck recovery thanks for help
i need the file param.tar please
jzxe10 said:
Duuude! It worked!!!!
Even without flashing param partition. Just the first step:
And ta-daaa! It works now. Ahhh! that was close! )))
You should write this instruction for [email protected] like me.
You can't imagine how I'm grateful to you!
Click to expand...
Click to collapse
hello. i need the file param.tar please
samersh72 said:
go into recovery, if it is possible, wipe data and cache, then flash with odin the stock firmware in pda with the pit file in pit window. just check auto reboot, f.reset and re-partition. when it say "pass" remove battery, re-insert it, go to recovery, wipe data and cache reboot.
im afraid that ticking "nand erase all" in odin, usually lead to a hard brick!
Click to expand...
Click to collapse
can you give me file param_I9505.tar? i need it, thanks first :laugh:
whynot4444 said:
can you give me file param_I9505.tar? i need it, thanks first :laugh:
Click to expand...
Click to collapse
why you need it? and what is the problem.
any way it is atttached, i didnt test it yet, flash it at your own responsibility
Hello
I have a Galaxy Tab 4 7.0 SM-T230 that is not booting correctly.
I got it in a non working condition, kept rebooting when turned on.
I reflashed the stock ROM using Odin after installing TWRP but this would results in the tablet getting to the choose your language screen then restarting itself.
I tried the below versions of the stock ROM but they all have the same result:
T230XXU0ANG3_T230SER0ANG2_T230XXU0ANG3_HOME.tar.md 5
T230XXU0ANJ4_T230BTU0ANJ2_T230XXU0ANJ4_HOME.tar.md 5
T230XXU0ANK3_T230BSE0ANK1_T230XXU0ANK3_HOME.tar.md 5
StockRoms-Series_T230(NU)+V1.6.3
The custom ROMs I have tried get stuck on their startup/boot screen.
I have also tried:
Wiping all david, cache, data, system, internal.
Re partitioning using DEGASWIFI_HIDDEN_100M.pit
Using Odin 3.9 and 3.12 with the md5 file in the AP section
TWRP openrecovery-twrp-2.8.0.1-degas and TRWP_2.8.7.0_EUR_VERSION
The custom ROMs cm-v13-degaswifi-kids-unofficial-20170713, ACHERON_ROM_V2.3.5_SM_T230_NU and [KK] [SM-T231/T230/NU] + Android 5.0 Lollipop Material Design
Combinations of reflashing, factory reseting, cache wiping.
Kies recovery but it will not maintain a connection, keeps disconnecting the tablet
Fixing partitions in TWRP
The only thing left to do as far as I am aware is to NAND Erase all but I am not sure if recovering after doing that is feasible.
Update: Tried Nand erasing, then re partitioning and reflashing of stock firmware, no change.
Tried EFS clear and Phone bootloader update.
Now the partitions appear to be broken and re partitioning with the pit file and reflashing does not fix it, cannot mount data or system.
Any suggestions to resolve this issue?
Thank you
Hi,
My s7 got a little bit strange so there very heavy lags.
After this I decided to try a cache wipe.
Aftrerwards I thought i going on the over to the factory reset and this will fix everything.
BUT still it didn´t worked and the reset failed
The output looks like this:
E:format_volume: make ext4 failed on /devblpck/platform/155a0000ufs/by-name/US
Data wipe failed!
Afterwards I reinstalled the OS several times with ODIN.
Still stuck in a Bootloop and a factory reset brings up the same error.
Even a nand erase aswell as a repartition with the correct pit file leeds to the same error.
At the moment I guess the phone is dead and there is no more help.
Or am I wrong and there is a way to bring this back to live?
How did you wipe the phone? You can wipe with twrp and also with adb.
I wiped it with the standard recovery delivered from the Phone.
I tried to flash it a couple of times with odin but still ran in to this error..
Try wipe it with adb. Can you boot into stock recovery? If you cant wipe, make sure you are flashing the correct csc for your phone. So it has to be explicitly for your region and network operator.