Related
Disclaimer
What's posted here is tested before sharing
but if something bad happens, it's not my problem.Originally posted @MotoModTR by »CanERYVZ« to restore the stock firmware of any XT1033 converted to XT1032 GPE 4.4.2 with deej_roamer's instructions posted here,then OTA'd to GPE 4.4.4. I'm just sharing, all credits to »CanERYVZ« :good:
Your device will be restored to XT1033 Asia.retail 4.4.2 successfully
TESTED and WORKS for XT1033 Asia Retail Dual-Sim version.
1- Download 4.4.2 stock version for your device RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
1a- Extract firmware to c:\retail
2- Download stock OTA 4.4.4 file for XT1033 Blur_Version.171.44.31.falcon_umtsds.AsiaRetail.en.03.zip
2a- Extract just the 3 files "gpt.bin", "logo.bin" and "emmc_appsboot.mbn" to c:\retail and overwrite the old ones.
3- Download mfastboot-adb.rar
3a- Extract mfastboot-adb.rar to c:\retail
4- Open CMD (command prompt) and go to C:\retail (type cd c:\retail in cmd)
Note: you need to run command prompt as administrator.
4a- Type the following commands one by one:
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
5- Go to stock recovery. Wipe data / factory reset and wipe cache for a clean start.
ps : motoboot partition will result error because we don't have it in the moto 4.4.4 ota file, just don't worry and continue. :good:
Greetings. :highfive::good:
So, this will restore the mobile from GPE to Stock 4.4.4 with dual sim capability ?
When does the android s friends
No,
This will restore XT1033 from GPE 4.4.4 to Moto 4.4.2 , but if you like you can OTA to Moto 4.4.4.
When does the android l friends
Awesome, but i have a question.
Some people just take the gpt.bin, replace it to 4.4.2 firmware pakage and flash without flashing motoboot.img.then ok.
Some people take logo.bin too.
But i did not see anyone take the emmc_appsboot.mbn. can u explain what is emmc_appsboot.mbn
Sorry for being noob.
Btw, how many devices did u test?
Sent from my SM-G900F using Tapatalk
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
aboot loads the kernel and ramdisk into memory at the addresses requested by the boot image header, and then signature validation is performed after this loading is complete. Because the boot image header is read straight from eMMC flash prior to any signature validation, it contains essentially untrusted data. As a result, it's possible to flash a maliciously crafted boot image whose header values cause aboot to read the kernel or ramdisk into physical memory directly on top of aboot itself!
Click to expand...
Click to collapse
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
fatihtpr said:
When does the android l friends
Click to expand...
Click to collapse
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Semseddin said:
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Click to expand...
Click to collapse
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
fatihtpr said:
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
Click to expand...
Click to collapse
Xt1032 is one sim version.
Xt1033 is dual sim version
Gửi từ GT-N7105 của tôi bằng cách sử dụng Tapatalk
Thanks windylawyer
Thanks OP...
THANKS!!!
thank youuu good sir! this is total life saver!!
Preflash validation failed
I have got a 1032. Used to have GPE, installed as 4.4.2, OTA upgraded to 4.4.4.
I want to get back the Motorola ROM, 4.4.2, or 4.4.4.
When I tried, I got a few "Preflash validation failed" errors, bootloader complains: "version downgraded for xxx". After the "downgrade" I have got just bootloader and recovery. No sstem can be booted/installed.
I have also tried this script (first few steps), but I have got the same errors for the first 2 commands
Tried with 4.4.2 and 4.4.4 xml.zip versions as well.
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
... and after the whole thing ran, boot process stops in logo (bootloader is open blahblahblah...)
bootloader / recovery can be started, nothing more.
is this method working successfully??
jbanti said:
is this method working successfully??
Click to expand...
Click to collapse
Yes
can i ota after following this procedure to restore to xt1033 firmware?
pfufle said:
can i ota after following this procedure to restore to xt1033 firmware?
Click to expand...
Click to collapse
YES... u can its fully Stock
Sent from my XT1033
Bootloader unlocked flashing and stuck
Semseddin said:
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
Click to expand...
Click to collapse
please somebody help.....after doing all this my screens blink with logo of BOOTLOADER UNLOCKED........and when i go to the fastbootboot and connect usb it now doesnt recognize it........plz help me save my moto g....plzzzzzzzzzzzzzzzz
I am Starting this with a very simple reason that the filefactory link for the Firmware which is the only link currently available right now is a crapy link. The download failed six times before i could finally download it. :highfive:
Downloads:
1.http://goo.gl/5aVzPE [Dev-Host]
2.http://goo.gl/JsWtVE [Mirror]
Pre-Requisite:
1.http://goo.gl/Wl50A3
Instructions 4.4.4:
1. Download 4.4.4 and Extract it to a folder
2. Download mfastboot-v2 and Extract it into the same folder [mfastboot Download: http://goo.gl/lTYq4F]
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
If you do not wish to lock bootloader skip 4.1 and 4.3
4.1
Code:
mfastboot.exe oem lock begin
4.2
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
4.3
Code:
mfastboot.exe oem lock
4.4
Code:
mfastboot.exe reboot
New 4.4.4 Software Update Is Available [Build KXB21.85.23]
Code:
Model number: Moto G (2nd Generation)
Android version: 4.4.4
Baseband version: MSM8626BP_1032.394.88.00R,EMEA_DSDS_CUST
Kernel version: 3.4.42-g668a77b [email protected] #1 Tue Aug 26 20:30:04 CDT 2014
System version: 21.11.23.titan_retaildsds.retaildsdsall.en.03 retin
Build number: KXB21.85-23
Instructions New 4.4.4 Update:
IF you are restoring to complete stock prefer the above method to go 4.4.4 method below is obsolete
1. Download The Firmware Package: http://goo.gl/NoKvOu
2. Copy this file into the root of directory of Internal SD (i.e Internal SD itself, no subfolders)
3. Reboot to Stock Recovery using Holding down VolumeDown+Power button to go to Bootloader, Then VolumeDown=>VolumeUp to recovery
or using ADB
Code:
adb reboot recovery
4. Apply update from SD and choose the downloaded package.
5. TaDa, Stock 4.4.4.
4.4.4 Update Doesn't wipe Internal Memory
And the Phone is as good as new.
Many thanks!!:good:
katobest said:
Many thanks!!:good:
Click to expand...
Click to collapse
Press Thanks Button. :good:
I'm new to motorola phones,
Can we unlock the moto g bootloader without getting the unlock code from motorola? and does that have any effect on warranty?
Is this mfastboot tool from motorola?
littleromeo said:
I'm new to motorola phones,
Can we unlock the moto g bootloader without getting the unlock code from motorola? and does that have any effect on warranty?
Is this mfastboot tool from motorola?
Click to expand...
Click to collapse
Without Unlock code u cant unlock booloader. your warrenty void after unlock.mfastboot tool from devlopers (google)
Failed to Validate System Image
Hi,
I have Moto G 2014 XT1068 model with locked bootloader. I have followed steps in 4.2 section, now the phone is not booting up with error message "Failed to validate system image boot uo failed" Please help revive my moto g 2014.
Thanks
Dhamukanna said:
Hi,
I have Moto G 2014 XT1068 model with locked bootloader. I have followed steps in 4.2 section, now the phone is not booting up with error message "Failed to validate system image boot uo failed" Please help revive my moto g 2014.
Thanks
Click to expand...
Click to collapse
Bro,
Never flash stock Firmware with a locked bootloader. -_-
Solution: Unlock Bootloader and reflash Stock Firmware with same steps.
Unlock Bootloader From Here: http://forum.xda-developers.com/mot...wip-unlock-bootloader-moto-g-2nd-gen-t2875728
SST Lock Failure
archies20 said:
Bro,
Never flash stock Firmware with a locked bootloader. -_-
Solution: Unlock Bootloader and reflash Stock Firmware with same steps.
Unlock Bootloader From Here: http://forum.xda-developers.com/mot...wip-unlock-bootloader-moto-g-2nd-gen-t2875728
Click to expand...
Click to collapse
Thanks Bro.. I unlocked bootloader.. followed steps in 4.2 section.. once I perform 4.4 step, phone reboots with a bootloader unlocked warning message and vibrates and then screen blinks with bootloader unlocked warning message and not booting into system.. Please help Bro
Dhamukanna said:
Thanks Bro.. I unlocked bootloader.. followed steps in 4.2 section.. once I perform 4.4 step, phone reboots with a bootloader unlocked warning message and vibrates and then screen blinks with bootloader unlocked warning message and not booting into system.. Please help Bro
Click to expand...
Click to collapse
I had the same issue. What I did was, in code 4.2, before this line:
"mfastboot.exe flash modem NON-HLOS.bin",
i added
"mfastboot.exe flash system system.img_sparsechunk.3",
as in the archive, there are three sprsechunk files.. Then the device booted up fine. Pls try and do let me know if I am wrong.
Is it necessary to flash all modules if we just want to return to stock recovery and remove root? Can we remove root and lock the bootloader without flashing all modules?
Thank you very much bro.. Issue resolved
deepaklunked said:
I had the same issue. What I did was, in code 4.2, before this line:
"mfastboot.exe flash modem NON-HLOS.bin",
i added
"mfastboot.exe flash system system.img_sparsechunk.3",
as in the archive, there are three sprsechunk files.. Then the device booted up fine. Pls try and do let me know if I am wrong.
Click to expand...
Click to collapse
Thanks bro.. I noticed system.img_sparsechunk.3 in the firmware folder and reflashed it as you have suggested.. worked like a charm now I am able to boot my moto g 2014 into system. Thanks again bro. I am going to post a new thread for properly reflashing stock rom on moto g 2014...
Update Steps else phone won't boot into system
archies20 said:
I am Starting this with a very simple reason that the filefactory link for the Firmware which is the only link currently available right now is a crapy link. The download failed six times before i could finally download it
Downloads:
1.http://goo.gl/5aVzPE [Dev-Host]
2.http://goo.gl/JsWtVE [Mirror]
Pre-Requisite:
1.http://goo.gl/Wl50A3
Instructions 4.4.4:
1. Download 4.4.4and Extract it to a folder
2. Download mfastboot-v2 and Extract it into the same folder [mfastboot Download: http://goo.gl/lTYq4F]
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
If you do not wish to lock bootloader skip 4.1 and 4.3
4.1
Code:
mfastboot.exe oem lock begin
4.2
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
4.3
Code:
mfastboot.exe oem lock
4.4
Code:
mfastboot.exe reboot
And the Phone is as good as new.
Click to expand...
Click to collapse
Please add mfastboot.exe flash system system.img_sparsechunk.3 after mfastboot.exe flash system system.img_sparsechunk.2 (I have XT1068 model). Users need to flash all system files (sparsechunk.0, 1, 2, 3) to reflash stock firmware on Moto G 2014 else phone won't boot into system saying Failed to Validate System Image".
Dhamukanna said:
Please add mfastboot.exe flash system system.img_sparsechunk.3 after mfastboot.exe flash system system.img_sparsechunk.2 (I have XT1068 model). Users need to flash all system files (sparsechunk.0, 1, 2, 3) to reflash stock firmware on Moto G 2014 else phone won't boot into system saying Failed to Validate System Image".
Click to expand...
Click to collapse
Oh my god sorry guys for issue. mfastboot.exe flash system system.img_sparsechunk.3 added thanks.
Help..!!!
I ve messed up with one of the system apk and now want to flash stock firmware. I followed the steps but at first command it says "waiting for device".. It stays forever. pls help
I am not able to relock the bootloader nor able to flash stock rom
i simply followed OP's guide but still
Any help would be appreciated
haytham.kenway said:
I am not able to relock the bootloader nor able to flash stock rom
i simply followed OP's guide but still
Any help would be appreciated
Click to expand...
Click to collapse
And in phone i Get "Failed to Vaildate System Image":crying::crying::crying::crying::crying:
in Phone "Invalid PIV signed image file"
http://imgur.com/xCCr3IZ
Anyone please help me
haytham.kenway said:
Anyone please help me
Click to expand...
Click to collapse
Follow the steps provided below:
1. Install Motorola Device Drivers
2. Get Unlock Code from Motorola Website
3. Download firmware for your phone model
4. Follow the instructions provided in this thread
Dhamukanna said:
Follow the steps provided below:
1. Install Motorola Device Drivers
2. Get Unlock Code from Motorola Website
3. Download firmware for your phone model
4. Follow the instructions provided in this thread
Click to expand...
Click to collapse
Bro i have succesfully flashed the rom but i'm not able to lock the bootloader
it says failed to lock bootloader sst failure
help please
Im not able to flash the rom. Extrcted fastboot and rom in the same folder. shift and fight click, run cmd here. i entered the command but it says ' waiting for device' im rooted , bootloader is unlocked and usb debugging is on
This method are originally made by the member ffosilva, I just made a step-by-step tutorial.
Works on the XT1068 (Dual-SIM) and XT1069 (DSTV)
What you need:
XT1068 or XT1069 stock ROM.
Unlocked Bootloader.
Necessary Files:
ADB
mfastboot
ROMS:
XT1064 Firmware
Lollipop modified to work dual SIM
Recovery:
CWM Philz Touch
OPTIONAL:
If something goes wrong...
XT1068 (Dual-Sim variant)
XT1069 (DSTV variant)
BUGS:
If use only 1 SIM: Nothing
If use 2 SIM's: Dialer fc when try to call or accept a call. You can use 2 SIMs, but you has to choice manually the SIM that you makes call. To solve this problem: Open the Dialer, Dialer setting (three dots) Call settings >phone account settings>Makes call with> Select the SIM that you use for make calls. (Correct-me if the names of options are wrong, cause I use another language.)
DSTV: function lost on XT1069.
Lets install Lollipop 5.0:
1. Download the necessary files.
2. Extract the adb tools, mfastboot, XT1064 firmware, CWM Philz Touchin a folder.
3. Put the Moto G on Bootloader Mode (Power on and Volume down)
4. Press and hold the Shift key, press the right button of mouse and select the option "Open a prompt".
5. Follow the commands below:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe reboot
6. Wait the system start, move the file "update_nofsg.zip" to the Moto G internal storage's. You lost the signal, don't worry, cause you will recover when you do the next step.
7. Go to bootloader screen (power on and volume down) and install the CWM Philz Touch Recovery using the command "mfastboot.exe flash recovery CWM_Touch_Titan_V2.img".
7. Acess the recovery mode, just select "Recovery" in bootloader screen.
8. Select "Install" in the CWM Philz Touch, select the "update_nofsg.zip" file and wait the process finish (It takes a while, but it will work).
9. Reboot, wait the system boot and update the apps.
Well done, Android 5.0 Lollipop installed!
Thanks for you tutorial. Lollipop is not so smooth as Kitkat was..
delete
Or just wait a little bit longer for lollipop to hit. Be any time soon for the dual sim version.
chamadas off
Vithalvess said:
This method are originally made by the member ffosilva, I just made a step-by-step tutorial.
Works on the XT1068 (Dual-SIM) and XT1069 (DSTV)
What you need:
XT1068 or XT1069 stock ROM.
Unlocked Bootloader.
Necessary Files:
ADB
mfastboot
ROMS:
XT1064 Firmware
Lollipop modified to work dual SIM
Recovery:
CWM Philz Touch
OPTIONAL:
If something goes wrong...
XT1068 (Dual-Sim variant)
XT1069 (DSTV variant)
BUGS:
If use only 1 SIM: Nothing
If use 2 SIM's: Dialer fc when try to call or accept a call. You can use 2 SIMs, but you has to choice manually the SIM that you makes call. To solve this problem: Open the Dialer, Dialer setting (three dots) Call settings >phone account settings>Makes call with> Select the SIM that you use for make calls. (Correct-me if the names of options are wrong, cause I use another language.)
DSTV: function lost on XT1069.
Lets install Lollipop 5.0:
1. Download the necessary files.
2. Extract the adb tools, mfastboot, XT1064 firmware, CWM Philz Touchin a folder.
3. Put the Moto G on Bootloader Mode (Power on and Volume down)
4. Press and hold the Shift key, press the right button of mouse and select the option "Open a prompt".
5. Follow the commands below:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe reboot
6. Wait the system start, move the file "update_nofsg.zip" to the Moto G internal storage's. You lost the signal, don't worry, cause you will recover when you do the next step.
7. Go to bootloader screen (power on and volume down) and install the CWM Philz Touch Recovery using the command "mfastboot.exe flash recovery CWM_Touch_Titan_V2.img".
7. Acess the recovery mode, just select "Recovery" in bootloader screen.
8. Select "Install" in the CWM Philz Touch, select the "update_nofsg.zip" file and wait the process finish (It takes a while, but it will work).
9. Reboot, wait the system boot and update the apps.
Well done, Android 5.0 Lollipop installed!
Click to expand...
Click to collapse
ola amigo fiz todo o processo mas nao consigo fazer ligaçoes somente envio de sms, rede e receber chamadas. alguma dica? obrigado.
Works fine
please mirror this files to some other site coz mega host not opening
mrstabs said:
Or just wait a little bit longer for lollipop to hit. Be any time soon for the dual sim version.
Click to expand...
Click to collapse
Then what are u doing on XDA buddy...
U should not be reading this post..if u r waiting for the Lollipop update.
---------- Post added at 10:07 PM ---------- Previous post was at 10:06 PM ----------
pradeepmaddy said:
please mirror this files to some other site coz mega host not opening
Click to expand...
Click to collapse
Install the mega app from playstore.
Then click on the mega link..& transfer the file to ur Mega account & download it.
This works. Done it with two phones so far.
if I want to move back to Kitkat what are the steps I should follow?
For in the Spanish XT1068 dialer FC continues. To continue waiting for the officer if that product or method works
It could not be done as follows: Flash the rom without flash the baseband files (either in exchange for American rom as the update for the lollipop)?
Like this:
Flash this:
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot erase cache
fastboot erase userdata
fastboot reboot
Don't flash this:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
djixon said:
For in the Spanish XT1068 dialer FC continues. To continue waiting for the officer if that product or method works
Click to expand...
Click to collapse
It works, I have an XT1068 too
You must to set a SIM as default, because it crash when prompt is selected
Sent from my XT1063 using XDA Free mobile app
Good work!!!
How i know if the xt1068 have the bootloader unlocked?
Thanks in advance!!!
luisjoseb said:
It works, I have an XT1068 too
You must to set a SIM as default, because it crash when prompt is selected
Sent from my XT1063 using XDA Free mobile app
Click to expand...
Click to collapse
Your sing is xt1063
djixon said:
Your sing is xt1063
Click to expand...
Click to collapse
Yes, because I install the LOLLIPOP XT1063 firmware on my XT1068
Sent from my XT1063 using XDA Free mobile app
I used xt1063 firmware on my xt1068 and flashed lollipop .... Now hw can I root my device ?
thomstrack said:
It could not be done as follows: Flash the rom without flash the baseband files (either in exchange for American rom as the update for the lollipop)?
Like this:
Flash this:
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot erase cache
fastboot erase userdata
fastboot reboot
Don't flash this:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
what do mean ... what shouldnt i flash this ????
---------- Post added at 07:26 PM ---------- Previous post was at 07:17 PM ----------
what should i do if i dont want the dual sim version ???? i am from india ... us rom dosnt recieve signal here ... but i use only one sim ... and i dont want those dual sim symbol thats on the lock screen ... what should i do to get us rom have signal
Vappali!
Vithalvess said:
This method are originally made by the member ffosilva, I just made a step-by-step tutorial.
Works on the XT1068 (Dual-SIM) and XT1069 (DSTV)
What you need:
XT1068 or XT1069 stock ROM.
Unlocked Bootloader.
Necessary Files:
ADB
mfastboot
ROMS:
XT1064 Firmware
Lollipop modified to work dual SIM
Recovery:
CWM Philz Touch
OPTIONAL:
If something goes wrong...
XT1068 (Dual-Sim variant)
XT1069 (DSTV variant)
BUGS:
If use only 1 SIM: Nothing
If use 2 SIM's: Dialer fc when try to call or accept a call. You can use 2 SIMs, but you has to choice manually the SIM that you makes call. To solve this problem: Open the Dialer, Dialer setting (three dots) Call settings >phone account settings>Makes call with> Select the SIM that you use for make calls. (Correct-me if the names of options are wrong, cause I use another language.)
DSTV: function lost on XT1069.
Lets install Lollipop 5.0:
1. Download the necessary files.
2. Extract the adb tools, mfastboot, XT1064 firmware, CWM Philz Touchin a folder.
3. Put the Moto G on Bootloader Mode (Power on and Volume down)
4. Press and hold the Shift key, press the right button of mouse and select the option "Open a prompt".
5. Follow the commands below:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe reboot
6. Wait the system start, move the file "update_nofsg.zip" to the Moto G internal storage's. You lost the signal, don't worry, cause you will recover when you do the next step.
7. Go to bootloader screen (power on and volume down) and install the CWM Philz Touch Recovery using the command "mfastboot.exe flash recovery CWM_Touch_Titan_V2.img".
7. Acess the recovery mode, just select "Recovery" in bootloader screen.
8. Select "Install" in the CWM Philz Touch, select the "update_nofsg.zip" file and wait the process finish (It takes a while, but it will work).
9. Reboot, wait the system boot and update the apps.
Well done, Android 5.0 Lollipop installed!
Click to expand...
Click to collapse
Hi!
Thank you! Hungarian language is it?
Root
Now how do I root it on my xt1069?
The title should have "update"... Thanks autoincorrect.
Sent from my XT1052 using XDA Free mobile app
Mine's just on the way down.
Just got mine but it won't update. I have no idea why. Maybe it's because I have a custom recovery?
It says it's expected to have a version ie victara and I have cm_victara. Any one know how to get this to update? My phone is currently rebooting constantly unless I turn it off myself.
Custom recovery is why. Look for guides to reflash
kboya said:
Custom recovery is why. Look for guides to reflash
Click to expand...
Click to collapse
I just used multi tool to install the stock recovery and wipe but it still won't work. Any ideas?
Please can someone upload the GB Retail firmware for the XT1092 if they have now got this successfully. Thanks!
Thats interesting, so the EU and GB versions have the same baseband.
Might be alright to stick to the EU firmware for now then, maybe it gets the next update faster
There's nothing on the surface to mark it out as being GB specific.
To be fair, I'm not sure a week's update difference is enough for me to care.
transmission1 said:
Please can someone upload the GB Retail firmware for the XT1092 if they have now got this successfully. Thanks!
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showpost.php?p=57591807&postcount=36
Diesel779 said:
Here you go: http://forum.xda-developers.com/showpost.php?p=57591807&postcount=36
Click to expand...
Click to collapse
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
AllenLoyola23 said:
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
Click to expand...
Click to collapse
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
AllenLoyola23 said:
Hey any ideas how i can go about installing that? Ive tried to use Multi tool to get stock but now it says my phone is xt1095 but it was originally xt1092 :/ ive tried to find the uk stock firmware but no luck.
Click to expand...
Click to collapse
Multi-Tool is made for the XT1095, so that's probably why. It even says that in the title.
You can use my guide here, to convert your phone back to XT1092 and get RETEUALL instead.
Lafenear said:
Multi-Tool is made for the XT1095, so that's probably why. It even says that in the title.
You can use my guide here, to convert your phone back to XT1092 and get RETEUALL instead.
Click to expand...
Click to collapse
Diesel779 said:
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
Click to expand...
Click to collapse
Thanks guys. I'm stuck tho. It says I'm missing AdbWinApi.DLL which is a driver right? I've got AndroidSDK tho so I don't why that's popping up.
AllenLoyola23 said:
Thanks guys. I'm stuck tho. It says I'm missing AdbWinApi.DLL which is a driver right? I've got AndroidSDK tho so I don't why that's popping up.
Click to expand...
Click to collapse
I wouldn't bother with the RETEU version if you're in the UK, the link I gave you is to the official RETGB factory image. As regards your problem try putting the msfastboot in your ADB folder and also extract your RETGB zip into the same folder, then open up a terminal in that folder and run the commands. Also, have you put your phone in fastboot and let Window automatically install the fastboot driver for your device?
Edit to add: If you are having problems though the RETEU is the same and you'll still receive official OTA's in the future. Just try what I typed above and if all else fails follow the other posters guide to install rthe RETEU version.
Diesel779 said:
I wouldn't bother with the RETEU version if you're in the UK, the link I gave you is to the official RETGB factory image. As regards your problem try putting the msfastboot in your ADB folder and also extract your RETGB zip into the same folder, then open up a terminal in that folder and run the commands. Also, have you put your phone in fastboot and let Window automatically install the fastboot driver for your device?
Edit to add: If you are having problems though the RETEU is the same and you'll still receive official OTA's in the future. Just try what I typed above and if all else fails follow the other posters guide to install rthe RETEU version.
Click to expand...
Click to collapse
Got it. I actually almost couldn't find my ADB folder. Somehow I didn't have in C: and had it installed in my documents folder. dumb.
But yeah I managed to get it. This means I get all future OTAs right? and Even if I don't I could still use that method to update? And thanks so much guys. Really appreciate it, I thought I was never going to get Lollipop on this.
AllenLoyola23 said:
Got it. I actually almost couldn't find my ADB folder. Somehow I didn't have in C: and had it installed in my documents folder. dumb.
But yeah I managed to get it. This means I get all future OTAs right? and Even if I don't I could still use that method to update? And thanks so much guys. Really appreciate it, I thought I was never going to get Lollipop on this.
Click to expand...
Click to collapse
Yes, you will get all future OTA's. This is an official RETGB retail image. It's exactly what you would have got if you had received the OTA normally, but instead of upgrading you've done a fresh install.
Diesel779 said:
Yes, you will get all future OTA's. This is an official RETGB retail image. It's exactly what you would have got if you had received the OTA normally, but instead of upgrading you've done a fresh install.
Click to expand...
Click to collapse
Is there a way to flash 4.4.4 images again? i went straight to L when i got my phone and didn't get a chance to test it out on kitkat, but it fails to flash the partition or motoboot image as the current version is too high, do you know how to bypass the checks?
IINexusII said:
Is there a way to flash 4.4.4 images again? i went straight to L when i got my phone and didn't get a chance to test it out on kitkat, but it fails to flash the partition or motoboot image as the current version is too high, do you know how to bypass the checks?
Click to expand...
Click to collapse
don' t worry about this
Diesel779 said:
It's a factory image you can flash it over anything you currently have running. Open the Multi tool folder and you will see some called 'msfastboot' Make a new folder on your desktop and place that in there, then download the factory image I gave you the link for and extract it into the same folder you placed the msfastboot into. Then, whilst in that folder hold the shift key on your keyboard and then right click on your mouse and select 'open a command window here' Then put your phone in fastboot by turning it off and holding the power and volume down keys at the same time. Then, in the terminal you opened earlier type these commands one at a time:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin (REMOVES YOUR CUSTOM BOOTLOGO (Not neccessary))
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata (FACTORY RESETS YOUR FLASH MEMORY (Not neccessary))
mfastboot erase customize (REMOVES MOTOMAKER CUSTOMIZATIONS (Not neccessary))
mfastboot erase clogo (REM
mfastboot reboot
Click to expand...
Click to collapse
Thank you for your link.
Could I ask, If i flash this over my european moto x will it turn it into a GB version in settings and receive future OTA updates? I assume it should.
Likewise do I need to unlock my boot loader to flash this, or will putting into fast boot do.
Thanks for your advice in advance.
nookcoloruser said:
Thank you for your link.
Could I ask, If i flash this over my european moto x will it turn it into a GB version in settings and receive future OTA updates? I assume it should.
Likewise do I need to unlock my boot loader to flash this, or will putting into fast boot do.
Thanks for your advice in advance.
Click to expand...
Click to collapse
Yes and yes and no you don' t need to unlock. But why do this as the reteu model received the update before the retgb model, you can just sideload the ota if you didn't get it yet?
I have found that the new update is not a newer Android version but a security patch according to identifications made in July 2016.
Total size of update is 508.4 MB.
Some people have reported problems with notification sounds.
Do we have any more news about this update.?
Please upload stock rom for indian variant moto g4plus xt1643
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory
I have installed the update and everything is working fine for me.
help
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
can u backup ur rom nd upload
navi74644 said:
can u backup ur rom nd upload
Click to expand...
Click to collapse
My phone is not rooted. So I guess I can not take ROM backup.
no need to be rooted
jack_04 said:
My phone is not rooted. So I guess I can not take ROM backup.
Click to expand...
Click to collapse
just put it in fastboot mode and pull the rom
navi74644 said:
just put it in fastboot mode and pull the rom
Click to expand...
Click to collapse
Can You Tell Me How To pull the rom In fastboot mode?
I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..
How is your phone working now?
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
Motorola claims that they have solved all the reported issues except heating because of its board.
Many people have found that notification volume is decreased to 30%.
Could you share detailed information about what is included in update?
Have you reported this with Motorola?
Milan Samani said:
I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..
Click to expand...
Click to collapse
If you are using unrooted phone the I would suggest you to report this with Motorola. Let us know how do they respond and if they are willing to offer any quick solution to this issue.
first thing first: I have rooted using systemless root method. so if I update to this latest patch will I have to root it again? and will it be a complete factory reset or I can expect my apps persisting after update?
Sent from my Moto G (4) using Tapatalk
is there any way to update my unlocked bootloader phone ? I tried everything.. Flashed stock recovery... Unroot my phone.. Flash fire etc. nothing works.. Any suggestion will be appriciate.
navi74644 said:
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory
Click to expand...
Click to collapse
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )
I got this update and after updating, I am facing low notification sound.
Sent from my Moto G (4) using Tapatalk
By my ear notification sound is about 60% what it was before (this is sitting two devices next to each other and comparing the updated device at max volume with the non-updated device, when the nud's volume bar was at ~60℅ they sounded equal). Incidentally 100℅ on the non-updated device was probably a bit too loud.
I've contacted Moto and requested they acknowledge the issue and provide a timeframe for a solution; I have threatened to return both devices to my supplier. I'll share the reply.
The US unlocked XT1644 didnt get any updates. Anybody expecting android 7.0 before the holidays is going to be disappointed.
Pranav Kumar said:
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )
Click to expand...
Click to collapse
how to remove warning nd here did get it flashed again i mean which service centre
navi74644 said:
how to remove warning nd here did get it flashed again i mean which service centre
Click to expand...
Click to collapse
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot
anhoxhrs said:
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot
Click to expand...
Click to collapse
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u
navi74644 said:
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u
Click to expand...
Click to collapse
Lol this guy who mentioned the stepd just did a copy paste.the url he provided is incomplete.the complete url is - https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view