Hey guys!
I have a weird problem with my LG D801 phone...
When I bought it the owner told me that was a D802 phone and it worked well but suddenly touchscreen stops working... so I have been reserching about this and found out that actually the phone is a D801 (printed in motherboard) flashed with a d802 rom so random touch problems may be because of this.
Then, I have tried to flash a KDZ of D801 by LG mobile support tool but not success it stops at 2%...
So... I have tried a LG FlashTool with the D801 TOT from this forum and get crossDL error I went across this searching here by changing the model with a HEX editor so thats no problem anymore but, when I try to flash with flash tool now it begins and suddenly stops at: LAF: BIN_USER_MODE reporting the error "Erase command failed"!
Any idea?? how to pass this weird error? there is other way to flash the D801 correct TOT or to force a KDZ with no errors? Thanks in advance!
Anyone?
need help
Related
I royally messed up. i got my lg g2 bricked and lg flash tool won't work with my device (at&t lg g2 D800) becuase it says device model is different even thought i have the right .dll and .tot. I learned that this is due to a type of system check done by lg flash tool. I tried the lg mobile support tool but it just gets stuck downloading the software. LGNPST is my only hope but there is a masterbin d/l error. I can't find a .kdz or bin file to use with another software. Any response would be very helpful.
Hey Guys,
Hoping someone can help me out here. I've got a friend's LG G2 and I'm trying to help him get it working. When I first got the device, it just booted to a black screen and when plugged into Ubuntu, it would show 15 or so drives that were unable to mount. I followed a guide to fix through Ubuntu and eventually got it to boot to where it would show a black screen with small white text indicating it was in fastboot mode. In fastboot mode, I followed this guide: https://www.youtube.com/watch?v=YEqEE9Qb8Sk and eventually got it to boot showing the LG Screen. I am able to get it into Download Mode and Recovery mode (but performing the hard reset doesn't work, as when the Android Man screen loads up with the progress bar underneath it stays on the screen for about 15 seconds before restarting and staying at the LG logo screen. No matter which Tot file for the D800 I flash through LG Flash Tool, it fails after about 3 seconds stating Cross DL (850) to (800). He had tried to use an G3 Rom on the device, which is what bricked it in the first place. I've noticed that the device is showing a blank IMEI in the flash tool as well. I've also tried using the DLL posted in @hyelton 's guide (LGUP_8974.dll) and it still gives me that same error.
Hoping someone here might have an idea of what I can try next to get this thing working again.
Thanks!
Mark
Fixed
All right guys. After much painstaking searching, I've finally found a solution, thanks to THIS REDDIT THREAD. I used a hex editor to modify the first line mentioning "D800" in the TOT file that is provided along with the link to the YouTube video in my OP, changing it to "D850." I used Hex Editor Neo to do this. This should work with any LG G2 that has had incorrect firmware flashed on it when you are getting an error of CrossDL from the LG Flash Tool.
I bought lg g2 labelled as d802 and i updated it to lollipop with kdz method. Phone successfully updated but touch screen went crazy and there was no network. I have searched several forums and found that my lg g2 is not actually a d802, and then i open my phone battery cover and found it is a d800. Then i followed this tutorial and I bricked my refurbished lg g2 and now there is no fastboot, no recovery mode, no QHSUSB_BULK, only download mode ''blue circles'' but not in firmware upgrade section. Stuck at boot loop only LG logo appears and nothing happen. Computer doesn't recognize, no connecting sound in windows.
Anyone can help me, I don't know what should i do now?
Thanks.
too
I'm with the same problem, my d802 was in F2fs and after install a diferent kernel bricked
Hi,
I bought an LG G2 D802 with kitkat(4.4.2) D80220c installed on it. After reading that G2 got lollipop update, I downloaded lollipop rom for g2 d802 ad manually flashed it, Everything worked fine until the mobile started. Its touch was erratic and there was no network. My mobile was not reading sim card and there was IMEI problem.
I read some posts that advised to open the back of cell and check model. I did, found out it was LS980. Now the real problem is tht when I flashed LS980 stock kitkat through Lg flash tool, it failed on 89%. Now my cell is stuck on LG logo. I tried to get into download mode, But failed to do so because my computer said that the device is not connected. Its not booting into recovery mode also. I'm stuck with this plastic piece of crap.
What should I do?
Plz help
Hi
I have the F320K model of the g2 and I flashed the international models firmware (d802) using the lg flash tool 2014. Now my phone is successfully booted but the screen is having the touch problems. It's pressed in the wrong place not where it's actually touched. Now when I try to get back and flash the F320K rom, the process is always stopped in between for some unknown reason.
Any help is appreciated.