my device is fully rooted, running android 4.4.2 custom OzcanRom v6.3
Greenify is enabled and im using it but i keep getting in wakeclock app RILJ.
ive been looking hours for it, but couldnt found any solution..
one thread said google maps can be the problem, so I deleted google maps however no change...
Thanks
????
darixtorento said:
my device is fully rooted, running android 4.4.2 custom OzcanRom v6.3
Greenify is enabled and im using it but i keep getting in wakeclock app RILJ.
ive been looking hours for it, but couldnt found any solution..
one thread said google maps can be the problem, so I deleted google maps however no change...
Thanks
Click to expand...
Click to collapse
Hi mate
RIL stands for Radio Interface Layer , did you try the basics?
Different modem
Different kernel
Switch to WCDMA only see if it goes better
Switch to GSM only see if it helps
MAX 404 said:
Hi mate
RIL stands for Radio Interface Layer , did you try the basics?
Different modem
Different kernel
Switch to WCDMA only see if it goes better
Switch to GSM only see if it helps
Click to expand...
Click to collapse
I have never flashed any kernel..
do u know good kernel for i9500?
ill check this out
thanks
darixtorento said:
I have never flashed any kernel..
do u know good kernel for i9500?
ill check this out
thanks
Click to expand...
Click to collapse
Hi
I use Omega's kernel , is good is almost stock , you could also use Samsung kernel and Maxfour kernel
Related
Hi,
Internet turns off after being idle for some time on ICS 4.04 this problem was there on my phone as soon asi switched from Stock to Cutom 4.03.. even after getting 4.04 this problem persists.
Plz tell me a way around this problem as i have to stay connected all the time..
I ahve to hence toggle the "data enable - On /off" for it to get connected .. and some times whn that doesnt work.. i hv to reboot the phone..
Help .. Help!!!
Guys please help me.. 90 smthing views and no replies.. help me out!!!
Have you changed the baseband to the Asian baseband? that can help.
Never had this problem even when I never changed my baseband. Please post result after changing the baseband.
brajesh.sharma87 said:
Have you changed the baseband to the Asian baseband? that can help.
Never had this problem even when I never changed my baseband. Please post result after changing the baseband.
Click to expand...
Click to collapse
Brajesh.. i had to change the abseband initially for a signal to appear in the first place.. i was on the india..china SEA baseband.. on your request i have tried the other basband as well Hongkong / Taiwan though its the same frequency .
I think i may have put some settlings which might be doing this...
Regualily an "E" sign appear on top when i am online ( E-Edge probably) but i use 2G only.. i read sm whr to save battery .. mobile cuts of internet on phone . Is this why it is happenenig with me??? Please tell me a way around ...
same problem here.
I'm from Poland, Play Mobile. I tried to change bandwidth few times, now I think, internet stops to switching off. Dunno what is causing this problem. On cm7 never happend. However after flashing CM9 from epsylon, network indicator is showing 3g (instead of H in stock or cm7) but in the system information is HSPA.
sorry for my bad english
give today's Epsylon build a try... the first one that data stays connected for me.
ktmbikerman said:
give today's Epsylon build a try... the first one that data stays connected for me.
Click to expand...
Click to collapse
thanks i will try this... but the problem is that i have a defy not a defy plus.. the build you are refering to is for defy + i think....today.. when i tried the 120406 nightly after patching the zip of nightly and gapps.. when i tried to run the kernel(CM7 one).. the phone shutdown.. didnt pose a problem in restarting.. but it did smthing it wasnt suppose to do... hence i am little apprehensive.. so plz clarify which files to use..which kernel. and nightly file..
If you have red lense, then you can use defy+ build by installing cm9 kernel.
If you want to return to a defy build later, just install cm7 kernel again
You can find download links on first page of this post: http://forum.xda-developers.com/showthread.php?t=1432100
javonera said:
If you have red lense, then you can use defy+ build by installing cm9 kernel.
If you want to return to a defy build later, just install cm7 kernel again
You can find download links on first page of this post: http://forum.xda-developers.com/showthread.php?t=1432100
Click to expand...
Click to collapse
Defy, Green - Then i am comfortable with the present build i am on.. But this really doesnt solve my problem.. can this be solved without flashing it again.. Very few seems to face this perticular problem..Help me out!!!
Its very annoying...
coolatin said:
Defy, Green - Then i am comfortable with the present build i am on.. But this really doesnt solve my problem.. can this be solved without flashing it again.. Very few seems to face this perticular problem..Help me out!!!
Its very annoying...
Click to expand...
Click to collapse
You will get CM9 for Defy builds by Epsilon here
Do you flashed the rom only one time? Or have you flashed the rom twice?
For me i had the same problems on cm7 but after flashing latest epsylon all work great. Perhaps try a full wipe and flash once more. (make a backup before and you have nothing to loose or?)
I have defy green lense and after choose the right baseband i have no problems, beofre with asian baseband in germany it doesnt work very well. So be sure you have choose the right baseband and/or full wipe and flash
for me new nighties updated via builtin updater solved problem. Now defy works perfect on ics.
edit:
nope.. it's switching off again... damn...
pranks1989 said:
You will get CM9 for Defy builds by Epsilon here
Click to expand...
Click to collapse
I dont hv a problem with the builds.. I can get that myself.. infact i have the latest one already installed.. what i want is smone to fix my problem of data connectivity.. the data goes off after being idle for smtime.. Help me with this...Please.. anyone..
Any heads up on my problem??
coolatin said:
I dont hv a problem with the builds.. I can get that myself.. infact i have the latest one already installed.. what i want is smone to fix my problem of data connectivity.. the data goes off after being idle for smtime.. Help me with this...Please.. anyone..
Click to expand...
Click to collapse
Have you tried taking your sim card out and giving it a good clean? I actually found that mine was bent from getting hot. After a clean and straighten it works very well with the latest ics builds. I was getting continual disconnects previously.
Sent from my MB526 using xda premium
I had the same issue on my D+ when I was on Quarx latest cm9 nightly. Initially the network doesnt show up at all. So i had to use baseband switcher to select India after flashing every Cm build. Then switched to latest cm7.2 by Quarx, but strangely it happened on 7.2 too. Then I just casually switched baseband to China ME722 1.10 and now the issue seems to be resolved. I'm yet to try the same on Cm9, will be trying it out in a day or two.
coolatin said:
Any heads up on my problem??
Click to expand...
Click to collapse
I can´t help you but i have a same problem like you. And i´m from the Czech Republic. Maybe i can change the bb.
Changing the baseband to other locations did not help the cause.. the same problem still persists..
Also my SIM seems fit and fine( )... and i cleaned it.. ( just for the sake of it)..but the problem is still thr
does no one have a proper solution for this...
I'm using Epsylon's 6th April build and it works perfectly fine. Even what I feel like; it is the best ROM to date which does not disconnects automatically as I face this problem with other ROMs.
Rajneeshgadge17 said:
I'm using Epsylon's 6th April build and it works perfectly fine. Even what I feel like; it is the best ROM to date which does not disconnects automatically as I face this problem with other ROMs.
Click to expand...
Click to collapse
i used that ROM as well it was there in dat ROM as well.. i am stil facing when i am on 4.04 16 Apr build.... still its there..
Could you discuss the setting for internet etc... so i can check if thrs anything i can do on that front.. its selected on "only 2G" with baseband set to SEA (Asia) ...lemme knw about that front.
this problem is the single most irritating problem i am facing ever since i put a custom ROM..
PLZ... some one for FiX for this!!!
HELP, My Phone always reboot. It hangs and then reboot
Sometimes, when my phone is on and my phone's screen is timed out , I wiill press the power button so that the screen will be on,but it auomatically reboots. This always happen. please help:crying:
android_j0405^^ said:
HELP, My Phone always reboot. It hangs and then reboot
Sometimes, when my phone is on and my phone's screen is timed out , I wiill press the power button so that the screen will be on,but it auomatically reboots. This always happen. please help:crying:
Click to expand...
Click to collapse
can you give us more info like when did this started happening after flashing a rom/kernel or fall on the floor
the X Machine said:
can you give us more info like when did this started happening after flashing a rom/kernel or fall on the floor
Click to expand...
Click to collapse
my phone did not fall on the floor and I flashed a custom rom yesterday. it started happening in the afternoon, today
android_j0405^^ said:
my phone did not fall on the floor and I flashed a custom rom yesterday. it started happening in the afternoon, today
Click to expand...
Click to collapse
Give us complete info like ROM name, kernel, tweaks and baseband.
Sent from my GT-S5300 using Tapatalk 2
luqman98 said:
Give us complete info like ROM name, kernel, tweaks and baseband.
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
ROM : Hyperion Gm final
KERNEL: STOCK
BASEBAND: S5360XXKI6
TWEAKS? the tweak that i only remember that I installed is the broadcomm booster version 0.3
android_j0405^^ said:
ROM : Hyperion Gm final
KERNEL: STOCK
BASEBAND: S5360XXKI6
TWEAKS? the tweak that i only remember that I installed is the broadcomm booster version 0.3
Click to expand...
Click to collapse
i think i got it you see Hyperion have a lot of tweaks and they may conflict with broadcom booster causing it to lag like hell try reflashing the hyperion rom deleting the tweaks then using broadcom booster or flash stock vie odin :fingers-crossed:
the X Machine said:
i think i got it you see Hyperion have a lot of tweaks and they may conflict with broadcom booster causing it to lag like hell try reflashing the hyperion rom deleting the tweaks then using broadcom booster or flash stock vie odin :fingers-crossed:
Click to expand...
Click to collapse
I flashed it via odin and flash the rom again but still:crying:
android_j0405^^ said:
I flashed it via odin and flash the rom again but still:crying:
Click to expand...
Click to collapse
maybe the rom is not compatible with the firmware. try to use DXLF1 or DDMD firmware.
maybe its the battery make sure that the battery isn't moving inside the cover
the X Machine said:
maybe its the battery make sure that the battery isn't moving inside the cover
Click to expand...
Click to collapse
Ok. I will go back to stock and observe if it is a hardware problem
flash rom again
flash the rom again i have same problem with hyperion 8 but then it solved
press"thanks" button if helped
android_j0405^^ said:
HELP, My Phone always reboot. It hangs and then reboot
Sometimes, when my phone is on and my phone's screen is timed out , I wiill press the power button so that the screen will be on,but it auomatically reboots. This always happen. please help:crying:
Click to expand...
Click to collapse
I'm on hyperion too... Try hells fusion kernel. It's Stable and smooth...
As for tweaks I'm using vulpix3.0+flyon4.0 + gamers ram manager from flyon thread
As far as stability and performance is concerned there is no problem
Change kernel and flash hyperion ril fix(for older kernels like hells fusion) enjoy
Hello,
it's my first post here, my English is regular so i think you will understand me
I'm using Reincarnation Rom based on CM 7.2 and percy_g2's [email protected]#2 kernel.
There are my problems:
1. I can call people, but nobody can call me. They are hearing normal signal but i don't even see they called.
2. When SIM card is put to the phone, i've got that black curtain after entering PIN(in attachment) or sometimes i see 4 parts of desktop but in bad places.
I hope that anyone knows why these things are happening.
Cheers and thanks in advance
ScarabeusIV said:
Hello,
it's my first post here, my English is regular so i think you will understand me
I'm using Reincarnation Rom based on CM 7.2 and percy_g2's [email protected]#2 kernel.
There are my problems:
1. I can call people, but nobody can call me. They are hearing normal signal but i don't even see they called.
2. When SIM card is put to the phone, i've got that black curtain after entering PIN(in attachment) or sometimes i see 4 parts of desktop but in bad places.
I hope that anyone knows why these things are happening.
Cheers and thanks in advance
Click to expand...
Click to collapse
1. which version r u using ?? make sure it is the updated version !! the older version may have some bugs of calling !!
2. all i can see in attachment is the pattern lock screen !! nothing else !! so please say clearly what is the problem..
ImBJ said:
1. which version r u using ?? make sure it is the updated version !! the older version may have some bugs of calling !!
2. all i can see in attachment is the pattern lock screen !! nothing else !! so please say clearly what is the problem..
Click to expand...
Click to collapse
1. Version of caller app or what? If Rom&Kernel im using newest versions.
2. It's a gif, you need to open it to see.
BUgs
They r hard to b fixed ... so i wud suggest u to change the rom ..... Try Hyperion ....Its stable fast and bug free
Sanjuujosephh said:
They r hard to b fixed ... so i wud suggest u to change the rom ..... Try Hyperion ....Its stable fast and bug free
Click to expand...
Click to collapse
I've had Hyperion, it's a cool ROM with some good features but i like to have polish language.
Anyway, i reinstalled stock firmware, installed percy's kernel and PureKat v2 ROM and everything is working perfectly, thread to close.
EDIT: Tried installing CM7 a few minutes ago and it's also working perfectly, so reinstalling stock rom and then flashing CM7 is the solution.
Q&A for [ROM][KERNEL][Oct 2][20F] Viper ROM V1.2 [MultiVariant]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I have just installed the rom on my F320L, it just kept rebooting. :crying:
pureluck9 said:
I have just installed the rom on my F320L, it just kept rebooting. :crying:
Click to expand...
Click to collapse
Do a clean flash and try again. It should fix your problem
mohamaadhosein said:
Do a clean flash and try again. It should fix your problem
Click to expand...
Click to collapse
I wiped 3 times, TWRP factory wipe twice, then advance wipe once. Same result
I also asked in rom thread but i wanna try zram. But i cant find a good way to turn it on? Can someone please explain where i can turn it on? Rom and kernel are running great btw!!!!
grtz from the crazy bastard from holland
schukje said:
I also asked in rom thread but i wanna try zram. But i cant find a good way to turn it on? Can someone please explain where i can turn it on? Rom and kernel are running great btw!!!!
grtz from the crazy bastard from holland
Click to expand...
Click to collapse
devil kernel manager
Miracast isusse
I can't use Miracast to show my phone display on my sony Bravia. my phone is LG g2 d800
Kernel is good can you add to future fiops and more governor
Gesendet von meinem LG-D802 mit Tapatalk
No mobile data
Hi, since I installed this rom, I don't have access to mobile data connection anymore. I went back to another ROM via recovery and data was back, so it has to be a ROM problem. Any ideas? My model is D806 (Argentina), maybe I should install the D802 version?
Lnfz said:
Hi, since I installed this rom, I don't have access to mobile data connection anymore. I went back to another ROM via recovery and data was back, so it has to be a ROM problem. Any ideas? My model is D806 (Argentina), maybe I should install the D802 version?
Click to expand...
Click to collapse
check your APN settings and reconfig it
Hi everyone, just installed this Rom and new kernel. But my phone never sleeps (see screenshots), maybe because I flashed new kernel in a row with rom on clean install? In addition to that everyone seems to get 40k+ on antutu I only got 29 :/
frajobs said:
Hi everyone, just installed this Rom and new kernel. But my phone never sleeps (see screenshots), maybe because I flashed new kernel in a row with rom on clean install? In addition to that everyone seems to get 40k+ on antutu I only got 29 :/
Click to expand...
Click to collapse
my phone sleeps normaly. kdz or tot then flash rom again
Asphalt 8
For some reason, I can't play Asphalt 8 with this rom, the game crashes instantaneously when I open it. Just happens with this ROM, anyone else?
Hi what kernel control app can i use to customize the govner and gpu?
Hey all,
I have few serious issues with my i9506 mobile that i really would be glad if you put some time into helping me solve them.
I'm using CM11-201501250=NIGHTLY-ks01lte, Android version 4.4.4
Mobile freezes a lot, almost 4+ times a day. nothing responses and i have to reboot it to use it again.
Video recording always have a bad sound quality.
A lot of apps crashes and launchers too.
Over heating (but not much i can do about that i think)
I been using CM11 for long time and i am gonna try to upgrade to CM12 now. all i want is a running CM version with exposed framework.
So please help me fix these issues
M4r5h4ll said:
Hey all,
I have few serious issues with my i9506 mobile that i really would be glad if you put some time into helping me solve them.
I'm using CM11-201501250=NIGHTLY-ks01lte, Android version 4.4.4
Mobile freezes a lot, almost 4+ times a day. nothing responses and i have to reboot it to use it again.
Video recording always have a bad sound quality.
A lot of apps crashes and launchers too.
Over heating (but not much i can do about that i think)
I been using CM11 for long time and i am gonna try to upgrade to CM12 now. all i want is a running CM version with exposed framework.
So please help me fix these issues
Click to expand...
Click to collapse
xposed framework doesn't work with CM12 and lollipop as far as I know..
awyeahh1 said:
xposed framework doesn't work with CM12 and lollipop as far as I know..
Click to expand...
Click to collapse
It works here: http://forum.xda-developers.com/showthread.php?t=3034811
and anyway i didn't upgrade yet. so issues still remain there.
M4r5h4ll said:
Hey all,
I have few serious issues with my i9506 mobile that i really would be glad if you put some time into helping me solve them.
I'm using CM11-201501250=NIGHTLY-ks01lte, Android version 4.4.4
Mobile freezes a lot, almost 4+ times a day. nothing responses and i have to reboot it to use it again.
Video recording always have a bad sound quality.
A lot of apps crashes and launchers too.
Over heating (but not much i can do about that i think)
I been using CM11 for long time and i am gonna try to upgrade to CM12 now. all i want is a running CM version with exposed framework.
So please help me fix these issues
Click to expand...
Click to collapse
Flash stock ROM and you will can flash CWM and Xposed Framework :highfive:
Joku1981 said:
Flash stock ROM and you will can flash CWM and Xposed Framework :highfive:
Click to expand...
Click to collapse
i been always using CM... i don't think everyone have the same issues. so i would like to fix them as i know stock ROM will be so retarded to use? i am used to CM :crying:
M4r5h4ll said:
i been always using CM... i don't think everyone have the same issues. so i would like to fix them as i know stock ROM will be so retarded to use? i am used to CM :crying:
Click to expand...
Click to collapse
CM is buggy crap. Stock 5.0.1 looks gorgeous, is awesome / polished / and rock stable. what more can one ask?
awyeahh1 said:
CM is buggy crap. Stock 5.0.1 looks gorgeous, is awesome / polished / and rock stable. what more can one ask?
Click to expand...
Click to collapse
Okay maybe i give it a try. where can i find one for my device ? GT-i9506 and location Denmark.
M4r5h4ll said:
Okay maybe i give it a try. where can i find one for my device ? GT-i9506 and location Denmark.
Click to expand...
Click to collapse
Install this APP for know your CSC better and tell me what appear.
Joku1981 said:
Install this APP for know your CSC better and tell me what appear.
Click to expand...
Click to collapse
it's: NEE
Thanks a lot!!! now i just need a good stable ROM. sick of crashes and **** :/
M4r5h4ll said:
it's: NEE
Thanks a lot!!! now i just need a good stable ROM. sick of crashes and **** :/
Click to expand...
Click to collapse
Just download from Sammobile.com Web site.
M4r5h4ll said:
it's: NEE
Thanks a lot!!! now i just need a good stable ROM. sick of crashes and **** :/
Click to expand...
Click to collapse
Take a look: HERE. Select the one you prefer: Kit Kat (more stable) or Lollipop.
already installed the L version. but phone stuck so far doesn't pass the Samsung screen (was stuck on recovery before)
so i re-installed Philz Touch recovery and wiped the cache... (btw it asked me to root the phone again before existing recovery)
so phone still stuck... what now
Okay i used this guide http://forum.xda-developers.com/showthread.php?t=2597058
and now it's working and downloading apps backup via titanium backup... will check the issues again and update u guys.
Thanks a lot for the help
Okay phone got stuck on samsung logo again... so now i redo it... and gonna use this kernel https://s.basketbuild.com/filedl/de...Lollipop/3.6.3/arter97-kernel-i9506-3.6.3.zip