Database Users

[Q] Boot Loop when attempting to update CM after installing

I successfully rooted and modded my Note 3 to run CyanogenMod 11-20140916-SNAPSHOT-M10-hlte. Since that time there have been 2 updates (M11 and M12).
I have downloaded and attempted to update both by using ROM Manager as well as the Update feature in the Settings Menu. Whenever I try to do this, I get the phone's opening splash screen along following messages:
RECOVERY BOOTING ...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
The phone then reboots and returns to this screen.
The only thing I can do is pull the battery, reinsert it, then perform the Volume Down + Home + Power reboot then press Volume Down to force the reboot back to normal.
Did I screw up something when I rooted my phone that is preventing the updates from processing, or am I stuck with manual updates from here on out. If that is the case, what do I need to do to make that happen?

Anyone? Anyone? Beuller? Beuller?
I am bumping this in hopes to get an answer. I am getting really sick of the instability and want to get the newest ROM flashed or, if that's not possible, flash the stock ROM back on the phone.

Odin a recovery like twrp after the odin is done shut down the phone . press volume up +power+home to get back in recovery . from here flash the cm ROM.
---------- Post added at 02:06 PM ---------- Previous post was at 02:05 PM ----------
Lol and if you don't know what Odin is than you shouldn't be messing with your phone..

Do a clean flash and it will be good...factory reset+wipe cache and dalvik....

gabesir said:
Odin a recovery like twrp after the odin is done shut down the phone . press volume up +power+home to get back in recovery . from here flash the cm ROM.
---------- Post added at 02:06 PM ---------- Previous post was at 02:05 PM ----------
Lol and if you don't know what Odin is than you shouldn't be messing with your phone..
Click to expand...
Click to collapse
I am familiar with Odin, but was able to do everything the first time with ROM Manager.

osutuba said:
I am familiar with Odin, but was able to do everything the first time with ROM Manager.
Click to expand...
Click to collapse
so it doesnt boot into recovery at all? the only way to fix it is to odin your recovery again and than flash your rom.

gabesir said:
so it doesnt boot into recovery at all? the only way to fix it is to odin your recovery again and than flash your rom.
Click to expand...
Click to collapse
Yeah, I had to Odin TWRP on there. Now, I just need to figure out which CM build to use, because there's only nightlies for my specific model (T-Mobile), while there are snapshots of the base model.
I'm welcome to trying other ROMS, but CM is what I am most accustomed to.

osutuba said:
Yeah, I had to Odin TWRP on there. Now, I just need to figure out which CM build to use, because there's only nightlies for my specific model (T-Mobile), while there are snapshots of the base model.
I'm welcome to trying other ROMS, but CM is what I am most accustomed to.
Click to expand...
Click to collapse
Awesome man! glad you back in TWRP..
Look for a CM11(most stable) port for your phone and go from there. :highfive:

gabesir said:
Awesome man! glad you back in TWRP..
Look for a CM11(most stable) port for your phone and go from there. :highfive:
Click to expand...
Click to collapse
Well, I have tried several different mods and keep getting the same error in TWRP:
E:Unable to open ZIP file
Error flashing zip <filename.zip>
Updating partition details ...
Ideas/suggestions? I'm comfortable enough with Odin now to the point that I can flash a ROM that way, if necessary.

rayman95 said:
Do a clean flash and it will be good...factory reset+wipe cache and dalvik....
Click to expand...
Click to collapse
Do read before you post. OP couldn't even access his recovery.
osutuba said:
Well, I have tried several different mods and keep getting the same error in TWRP:
E:Unable to open ZIP file
Error flashing zip <filename.zip>
Updating partition details ...
Ideas/suggestions? I'm comfortable enough with Odin now to the point that I can flash a ROM that way, if necessary.
Click to expand...
Click to collapse
First of all, why is it called filename.zip? Put the CM .zip file to internal or external SD card (latter preferred if you have one) and then flash it directly from there after wiping (I wipe system, data, cache, dalvik cache).

Someguyfromhell said:
Do read before you post. OP couldn't even access his recovery.
First of all, why is it called filename.zip? Put the CM .zip file to internal or external SD card (latter preferred if you have one) and then flash it directly from there after wiping (I wipe system, data, cache, dalvik cache).
Click to expand...
Click to collapse
why do you propose him to flash CM11 if he can't get recovery mode????

Someguyfromhell said:
First of all, why is it called filename.zip?
Click to expand...
Click to collapse
I used <filename.zip> as a generic marker, as I have tried several different ROMs with the same outcome. As I stated in a previous reply, I was able to flash TWRP using Odin without issue. I have even re-flashed it several times since getting the aforementioned error, thinking something wasn't working.
Someguyfromhell said:
Put the CM .zip file to internal or external SD card (latter preferred if you have one) and then flash it directly from there after wiping (I wipe system, data, cache, dalvik cache).
Click to expand...
Click to collapse
I don't have an external SD Card on hand at the moment, otherwise I would try that.

rayman95 said:
why do you propose him to flash CM11 if he can't get recovery mode????
Click to expand...
Click to collapse
Please keep an eye on the topic. You can see that he solved the issue (after your and before my post) with accessing recovery, thereby we have moved on to solve his next problem - flashing the ROM.
osutuba said:
I used <filename.zip> as a generic marker, as I have tried several different ROMs with the same outcome. As I stated in a previous reply, I was able to flash TWRP using Odin without issue. I have even re-flashed it several times since getting the aforementioned error, thinking something wasn't working.
I don't have an external SD Card on hand at the moment, otherwise I would try that.
Click to expand...
Click to collapse
Re-download the .zip file and place it on the internal storage then. Do MD5 check also before moving, seems like the zip file was corrupted (faulty download?) when you tried to flash it.

Soft Brick need access to shell.

Been doing my own searches for the passed few days to find a way. I need my phone now so I'm going to ask in my own thread. Sorry if my search foo is failing me.
I rooted my note 3 (no custom rom) with CFfire one touch and it worked great. I then wanted to try pimp my rom and all its features. Pimp my rom had a boot animation changer and I tried it ...now my phone wont boot passed the tmobile login.
Some research told me to edit build.prop and reset it or something but I need access to shell.
forum.xda-developers.com/showthread.php?t=1927198
That was a great thread and I thought I made a break through ...but my phone is not recognized in device manager so I can't install the custom naked drivers. So now I'm stuck where I need to get shell access but I'm lost.

1. You can't access to shell coz your device don't boot.
2. That thread is for one Samsung Galaxy S3. Build.prop isn't the same for your device. Better don't play with it.
3. Is your device a SM-N900T? For be sure...

Joku1981 said:
1. You can't access to shell coz your device don't boot.
2. That thread is for one Samsung Galaxy S3. Build.prop isn't the same for your device. Better don't play with it.
3. Is your device a SM-N900T? For be sure...
Click to expand...
Click to collapse
1. Can't I access it from recovery?
2. I notice ...wasn't going to use that build.prop ...just the process to get to mine.
3. Yep
Any advice would be great. I'd rather not reset...I tried running CFfire again....didn't work.

Voluntarist said:
1. Can't I access it from recovery?
2. I notice ...wasn't going to use that build.prop ...just the process to get to mine.
3. Yep
Any advice would be great. I'd rather not reset...I tried running CFfire again....didn't work.
Click to expand...
Click to collapse
The solution is easy.
1. Put your phone in DOWNLOAD MODE.
2. You will have to download and unzip STOCK ROM. Reflash it through ODIN then. The latest for your model is: HERE
3. Good luck :highfive:

Joku1981 said:
The solution is easy.
1. Put your pone in DOWNLOAD MODE.
2. You will have to download and unzip STOCK ROM. Reflash it through ODIN then. The latest for your model is: REMOVED BECAUSE I DONT HAVE 10 POSTS
3. Good luck :highfive:
Click to expand...
Click to collapse
Really? That easy? I don't lose anything?
Will I need to reroot after? (just curious)

Voluntarist said:
Really? That easy? I don't lose anything?
Will I need to reroot after? (just curious)
Click to expand...
Click to collapse
Yep and yep.

Joku1981 said:
Yep and yep.
Click to expand...
Click to collapse
I flashed that file. Now it wont get passed app 5 out of 206 then I decided to just flash the root. Then it wont get passed app 2 of 204.
I have no clue where to go from here.

Using a custom recovery, wipe your dalvik cache and reboot.

gilliardmelo said:
Using a custom recovery, wipe your dalvik cache and reboot.
Click to expand...
Click to collapse
Still wont get passed app 6 of 210

Take the battery out for a few minutes then try to boot up again with the battery back in. If that doesn't work I'm afraid you have to do a factory reset, then flash the ROM. Next time make sure you do a nandroid backup before you try anything like this.
Sent from my SM-N900T using xda premium
---------- Post added at 05:16 PM ---------- Previous post was at 04:44 PM ----------
Don't wipe, I have an idea if the battery thing doesn't work!
Sent from my SM-N900T using xda premium

Nathan.7118391 said:
Take the battery out for a few minutes then try to boot up again with the battery back in. If that doesn't work I'm afraid you have to do a factory reset, then flash the ROM. Next time make sure you do a nandroid backup before you try anything like this.
Sent from my SM-N900T using xda premium
---------- Post added at 05:16 PM ---------- Previous post was at 04:44 PM ----------
Don't wipe, I have an idea if the battery thing doesn't work!
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
Through the custom recovery tool I can see my files. Is there a way I can get them? Most important my Chrome bookmarks... I didn't sync with the cloud.

The short answer is yes. Now here's what I want you to do:
1. In your custom recovery make a backup of all your files
2. Reboot into recovery (I always do a reboot after I do a backup)
3. Do a factory reset/wipe data
4. Flash the ROM that you wanted on your phone.
5. Reboot the phone normally which it should just go straight to the welcome screen
6. You will have to flash the recovery again via odin or some app on your phone.
7. reboot into recovery and do an advanced restore via:
A.CWM - (I don't use this so if someone knows please correct me) go to backup and restore
B. Go to advanced restore
C. Pick your backup file
D. Pick Data ONLY
E. Restore Data and reboot normally
a. TWRP - Reboot into recovery
b. Choose restore
c. Choose file
d. Choose "date" only and restore and reboot.
This should give you back your data on a clean ROM. Let me know if it works for you.

Nathan.7118391 said:
The short answer is yes. Now here's what I want you to do:
1. In your custom recovery make a backup of all your files
2. Reboot into recovery (I always do a reboot after I do a backup)
3. Do a factory reset/wipe data
4. Flash the ROM that you wanted on your phone.
5. Reboot the phone normally which it should just go straight to the welcome screen
6. You will have to flash the recovery again via odin or some app on your phone.
7. reboot into recovery and do an advanced restore via:
A.CWM - (I don't use this so if someone knows please correct me) go to backup and restore
B. Go to advanced restore
C. Pick your backup file
D. Pick Data ONLY
E. Restore Data and reboot normally
a. TWRP - Reboot into recovery
b. Choose restore
c. Choose file
d. Choose "date" only and restore and reboot.
This should give you back your data on a clean ROM. Let me know if it works for you.
Click to expand...
Click to collapse
The person who's windows machine im using is leaving soon and I wont have it for a while.
Thanks! I'll do a backup and hopefully it works when I can try later.

Thanks for the help everyone!

screen gone vivid (strange hues)

I flashed MIUI v6 it was working ok but then i stupidly applied the update. now the phone boots up i can see all the icons but there are bars on the screen, but when i try to reboot into twrp i cant see anything but the bars, and i can see icons in the background, can it be fixed by somehow installing stock firmware or the screen is fried.
Sorry if it i am not clear enough dont know how to phrase it.

same happed with me when i flash some odd recovery u should trun off your phone and leave it for some time willl fix the problem

Lonely khan said:
same happed with me when i flash some odd recovery u should trun off your phone and leave it for some time willl fix the problem
Click to expand...
Click to collapse
tried that it didn't work out

Lonely khan said:
same happed with me when i flash some odd recovery u should trun off your phone and leave it for some time willl fix the problem
Click to expand...
Click to collapse
got it to work , used twrp to flash worked like a charm

carelessmunk said:
got it to work , used twrp to flash worked like a charm
Click to expand...
Click to collapse
Bro can you tell me procedure how to make phone function
I'm also stuck in same problem.

stranzer05 said:
Bro can you tell me procedure how to make phone function
I'm also stuck in same problem.
Click to expand...
Click to collapse
Sorry i have not been around here. If you can boot in to your mobile then you can do as following.
1. Install flashify from app store.
2. Install TWRP from app store.
3. Flash the TWRP recovery using flashify.
4.Now run TWRP app and flash your ROM, remember to select wipe data,cache and dalvik, and you are done.
Download TWRP recovery from here http://forum.xda-developers.com/eli...e-e7-discovery-elite-porting-project-t3009765.
don't forget to thank the original developers.

Thanks Buddy
carelessmunk said:
Sorry i have not been around here. If you can boot in to your mobile then you can do as following.
1. Install flashify from app store.
2. Install TWRP from app store.
3. Flash the TWRP recovery using flashify.
4.Now run TWRP app and flash your ROM, remember to select wipe data,cache and dalvik, and you are done.
Download TWRP recovery from here http://forum.xda-developers.com/eli...e-e7-discovery-elite-porting-project-t3009765.
don't forget to thank the original developers.
Click to expand...
Click to collapse
Thanks bro
I did it...
It takes few days to fade that logo

Probably soft bricked my OP5, is this fixable?

Dear XDA,
I screwed up... I think my device is now soft bricked.... :crying:
It all started good on a sunny saturday. I thought this was a good day to try another custom rom. Namely Codename Phoenix.
My device was already rooted so i started with upgrading my TWRP to the latest Blu_Spark TWRP 3.2.1. After flashing the recovery i continued with the ROM. It all went downhill from there....
The install finished and i booted my device. Knowing this could take a while i got into the shower thinking it would finish when i got back. But when i got back it was still booting. Knowing the first boot can take a while so I let it be. After an hour or so it was still stuck on the google logo and the weather and my mood changed for the worse.
I figured something in the process went wrong and tried to boot into recovery. That worked so I thought 'Cool, let's fix it there'. But the recovery was encrypted so i couldn't get to my data. Normally you put in your pincode and it decrypts your phone. This was not the case.... I couldn't put in my pincode so decrypting was out of the question.
Luckily ADB was still working so I downloaded the original Oxygen OS rom and tried to side-load it... This got stuck on 47% for no reason at all. Phone had 100% battery and didn't time-out..
I was really confused, but I let the device do it's thing and maybe things would work out... I was wrong. Everything was worse. Because i tried installing the original firmware it removed the custom recovery....
So now i have a device with no OS and I can't get into recovery. Luckily there is a unbrick tool for OnePlus 5. Following those steps i got stuck on the part that it does not show in my device-manager.
Currently i'm really grumpy and have no idea how to fix this.
I humbly ask for advice. Is this solvable or do i have a wasted OnePlus 5?
Thanks in advance,
Lennard

can you reboot to bootloader?
if yes, you can flash original or custom recovery...

---------- Post added at 09:39 AM ---------- Previous post was at 09:38 AM ----------
[/COLOR]
len.asdf said:
Dear XDA,
I screwed up... I think my device is now soft bricked.... :crying:
It all started good on a sunny saturday. I thought this was a good day to try another custom rom. Namely Codename Phoenix.
My device was already rooted so i started with upgrading my TWRP to the latest Blu_Spark TWRP 3.2.1. After flashing the recovery i continued with the ROM. It all went downhill from there....
The install finished and i booted my device. Knowing this could take a while i got into the shower thinking it would finish when i got back. But when i got back it was still booting. Knowing the first boot can take a while so I let it be. After an hour or so it was still stuck on the google logo and the weather and my mood changed for the worse.
I figured something in the process went wrong and tried to boot into recovery. That worked so I thought 'Cool, let's fix it there'. But the recovery was encrypted so i couldn't get to my data. Normally you put in your pincode and it decrypts your phone. This was not the case.... I couldn't put in my pincode so decrypting was out of the question.
Luckily ADB was still working so I downloaded the original Oxygen OS rom and tried to side-load it... This got stuck on 47% for no reason at all. Phone had 100% battery and didn't time-out..
I was really confused, but I let the device do it's thing and maybe things would work out... I was wrong. Everything was worse. Because i tried installing the original firmware it removed the custom recovery....
So now i have a device with no OS and I can't get into recovery. Luckily there is a unbrick tool for OnePlus 5. Following those steps i got stuck on the part that it does not show in my device-manager.
Currently i'm really grumpy and have no idea how to fix this.
I humbly ask for advice. Is this solvable or do i have a wasted OnePlus 5?
Thanks in advance,
Lennard
Click to expand...
Click to collapse
Don't worry! Your device is safe. At most, you'll be required to wipe your data.
Try using the official twrp recovery here:
https://twrp.me/oneplus/oneplus5.html
If this doesn't work, let me know.

canteo said:
can you reboot to bootloader?
if yes, you can flash original or custom recovery...
Click to expand...
Click to collapse
I can go into fastboot and managed to install TWRP with the comment below!
Zohair.ul.hasan said:
---------- Post added at 09:39 AM ---------- Previous post was at 09:38 AM ----------
[/COLOR]
Don't worry! Your device is safe. At most, you'll be required to wipe your data.
Try using the official twrp recovery here:
https://twrp.me/oneplus/oneplus5.html
If this doesn't work, let me know.
Click to expand...
Click to collapse
Thanks for these words! That's a big relieve
With your link I managed to install TWRP through fastboot. So now i have a custom recovery. The current problem is that my data is encrypted and I cannot decrypt it. There is no option to fill in a password since there is no OS that requires a password. So it's sort of a neverending cycle . Although fastboot, recovery and sideload should work now.
The thing is, previously I tried installing the original firmware and that failed at 47%. So i'm not sure what to do now.
I tried installing 'codeworkx universal twrp 3.2.1-0 recovery' since he seems to have fixed the encrypt issue. But when I tried sideloading the file it says "Zip file is corrupt!". So no succes there yet.
To be precise, this is the threat for Codeworkx Universal TWRP : https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
And i downloaded and tried installing: twrp-3.2.1-0-universal-codeworkx-cheeseburger.img
I was thinking about downloading the latest Codename Phoenix ROM, but when I try to download the latest release the file is name "Codename-Phoenix-NOS-8.1-oneplus5t-20180303.zip". That implies it's only for the 5t and not for the 5. So that could be my original problem? That i downloaded the wrong ROM?
That aside.
Should I try to get the download link for CNP and download the latest release for the OP5 and install that.
Or
Should i try to install the original firmware. Reset everything and start over from the beginning (unlocking, rooting, etc..)
Thanks again for all the help

len.asdf said:
I can go into fastboot and managed to install TWRP with the comment below!
Thanks for these words! That's a big relieve
With your link I managed to install TWRP through fastboot. So now i have a custom recovery. The current problem is that my data is encrypted and I cannot decrypt it. There is no option to fill in a password since there is no OS that requires a password. So it's sort of a neverending cycle . Although fastboot, recovery and sideload should work now.
The thing is, previously I tried installing the original firmware and that failed at 47%. So i'm not sure what to do now.
I tried installing 'codeworkx universal twrp 3.2.1-0 recovery' since he seems to have fixed the encrypt issue. But when I tried sideloading the file it says "Zip file is corrupt!". So no succes there yet.
To be precise, this is the threat for Codeworkx Universal TWRP : https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
And i downloaded and tried installing: twrp-3.2.1-0-universal-codeworkx-cheeseburger.img
I was thinking about downloading the latest Codename Phoenix ROM, but when I try to download the latest release the file is name "Codename-Phoenix-NOS-8.1-oneplus5t-20180303.zip". That implies it's only for the 5t and not for the 5. So that could be my original problem? That i downloaded the wrong ROM?
That aside.
Should I try to get the download link for CNP and download the latest release for the OP5 and install that.
Or
Should i try to install the original firmware. Reset everything and start over from the beginning (unlocking, rooting, etc..)
Thanks again for all the help
Click to expand...
Click to collapse
Nice to hear that!
To be clear, does the TWRP decrypt you data? When you click install in TWRP, is it a bunch of randomly named files?
I think you should go ahead with installing CNP, you shouldn't have any problems with it now that you've got the correct version.
Good luck!

Zohair.ul.hasan said:
Nice to hear that!
To be clear, does the TWRP decrypt you data? When you click install in TWRP, is it a bunch of randomly named files?
I think you should go ahead with installing CNP, you shouldn't have any problems with it now that you've got the correct version.
Good luck!
Click to expand...
Click to collapse
Yeah it's a bunch of random file names. Like "2TAjnCI8CpHDL38Oh684DuTSgaO".
Alright, i'll let you know if I succeed. Thanks for the help

len.asdf said:
Yeah it's a bunch of random file names. Like "2TAjnCI8CpHDL38Oh684DuTSgaO".
Alright, i'll let you know if I succeed. Thanks for the help
Click to expand...
Click to collapse
Wait! Staying encrypted is a bunch of trouble. I recommend u to follow these steps:
Go to recovery
Select wipe
Select advanced wipe
Clear dalvik and cache
Go back
Select wipe
Click "Format Data"
Type in yes
Go back
Select wipe
Swipe to factory reset
Reboot recovery
Transfer the ROM from PC to phone
Install it

Zohair.ul.hasan said:
Wait! Staying encrypted is a bunch of trouble. I recommend u to follow these steps:
Go to recovery
Select wipe
Select advanced wipe
Clear dalvik and cache
Go back
Select wipe
Click "Format Data"
Type in yes
Go back
Select wipe
Swipe to factory reset
Reboot recovery
Transfer the ROM from PC to phone
Install it
Click to expand...
Click to collapse
Haha thanks! Just in time. Was still downloading the latest CNP .

Whew! Update me after flashing.

Zohair.ul.hasan said:
Whew! Update me after flashing.
Click to expand...
Click to collapse
Hmm, the installation should be a succes. But when i tried to reboot and start up the OS / System it just reboots into TWRP.... ? It's sort of boot looping into recovery.
I tried installing a couple of times with and without wiping dalvik/cache/system.
Could the install file not be complete?
On a side note, my data is not encrypted

len.asdf said:
Hmm, the installation should be a succes. But when i tried to reboot and start up the OS / System it just reboots into TWRP.... ? It's sort of boot looping into recovery.
I tried installing a couple of times with and without wiping dalvik/cache/system.
Could the install file not be complete?
On a side note, my data is not encrypted
Click to expand...
Click to collapse
Did you factory reset by going into wipe>swipe to factory reset?
If not then do that and flash it

Zohair.ul.hasan said:
Did you factory reset by going into wipe>swipe to factory reset?
If not then do that and flash it
Click to expand...
Click to collapse
YES! It work. Many thanks

len.asdf said:
YES! It work. Many thanks
Click to expand...
Click to collapse
Congrats! Please like my replies if you don't mind

Zohair.ul.hasan said:
Congrats! Please like my replies if you don't mind
Click to expand...
Click to collapse
But of course! Already did that. But i'm not sure if it shows or not. Tried clicking multiple times on the thanks button but it doesn't highlight. It should do that right?

len.asdf said:
But of course! Already did that. But i'm not sure if it shows or not. Tried clicking multiple times on the thanks button but it doesn't highlight. It should do that right?
Click to expand...
Click to collapse
Yes it should but that's okay

Zohair.ul.hasan said:
Yes it should but that's okay
Click to expand...
Click to collapse
installed the xda app and there I could give you a 'thanks'

MIUI 10 for Mi Note 3 - 8.8.15 Android 8.1

China
8.6.25: https://goo.gl/1Bw2So
8.6.26: https://goo.gl/vPwX2H
8.6.27: https://goo.gl/cTz1n3
8.7.2: https://goo.gl/9t8ebL
8.7.3: https://goo.gl/7g3xwF
8.7.5: http://bigota.d.miui.com/8.7.5/miui_MINote3_8.7.5_8cc30ff428_8.1.zip
8.7.16: http://bigota.d.miui.com/8.7.16/miui_MINote3_8.7.16_a78b3714e8_8.1.zip
8.7.26: http://bigota.d.miui.com/8.7.26/miui_MINote3_8.7.26_655203d184_8.1.zip
8.8.15:
http://bigota.d.miui.com/8.8.15/miui_MINote3_8.8.15_57afca2d39_8.1.zip
Source: https://goo.gl/f11anE
Only English and Chinese
Bug:
- Unknown
Android Version:
8.1

Is it an alpha / beta release?

How can we install it ? My bootloader is unlocked.

Comemesas said:
Is it an alpha / beta release?
Click to expand...
Click to collapse
Closed Beta

finally something move to oreo...hopefully in a few weeks will come .eu or some stock Android O.
great!

I advise you to think before you install this version. The data partition is encrypted when it is reprogrammed.

Guys when i flash this rom the twrp said MD5 FILE NON FOUND.. What is out?

Already downloaded here and testing. Thanks man!

i flash it through twrp. it say succesful. then when i reboot to system, it just bootloop. am i wrong flash it via twrp?

Bugs? Comments?

anyone here should tell us "how to flash this ROM".
---------- Post added at 10:59 AM ---------- Previous post was at 10:53 AM ----------
afonsobr said:
Already downloaded here and testing. Thanks man!
Click to expand...
Click to collapse
Can you tell me how to flash it?

agileart said:
anyone here should tell us "how to flash this ROM".
---------- Post added at 10:59 AM ---------- Previous post was at 10:53 AM ----------
Can you tell me how to flash it?
Click to expand...
Click to collapse
need twrp man. Just like other miui rom, you need to clear davlik, chache and data, then flash the zip.
it is very usable for a nighlty. Maybe there is some fb and whatsapp's notification bug (u dont get the notifications), and that's it. The battery management is AWESOME!! i liked a lot. however i have to say that is a very clean UI just like apple xD

afonsobr said:
need twrp man. Just like other miui rom, you need to clear davlik, chache and data, then flash the zip.
it is very usable for a nighlty. Maybe there is some fb and whatsapp's notification bug (u dont get the notifications), and that's it. The battery management is AWESOME!! i liked a lot. however i have to say that is a very clean UI just like apple xD
Click to expand...
Click to collapse
how long it takes ? i'm waited about 20 minute, but still stuck on android booting logo. or should i replace my TWRP?

agileart said:
how long it takes ? i'm waited about 20 minute, but still stuck on android booting logo. or should i replace my TWRP?
Click to expand...
Click to collapse
nooo, it is super fast!
Wipe cache, data and davlik and then flash TWO TIMES. The first boot is very fast

afonsobr said:
nooo, it is super fast!
Wipe cache, data and davlik and then flash TWO TIMES. The first boot is very fast
Click to expand...
Click to collapse
No luck. i tried just like you did. but still stuck on that android booting logo. i try to download he file again. may be its just corrupted.

http://bigota.d.miui.com/8.6.25/miui_MINote3_8.6.25_fdb0118de0_8.1.zip

Flashing tips
Flash the Rom on top of the miui 9. Just erase the data, cache and nothing more. If you try to erase everything you're going to get a boot loop. Install magisk after the first boot but be aware that you won't be able to flash modules as the data storage isn't recognisable for some reason. Supersu can't be flashed. Other than that the rom works fine and you're going to like a few of the new features.

agileart said:
i flash it through twrp. it say succesful. then when i reboot to system, it just bootloop. am i wrong flash it via twrp?
Click to expand...
Click to collapse
You need twrp which support Android 8.1

?

Gogentle97 said:
You need twrp which support Android 8.1
Click to expand...
Click to collapse
Which one?