Database Users

4G on D802 HKG version

I have a D802 Hong Kong version. In the secret menu (3845#*802#) i have found this: LGD802AT-00-V10C-HKG-XX-NOV-30-2013
Now, I would like to use the 4g connection in my country (Italy, carrier TIM) but the 4g option is not avaible in "network mode". After a test with another G2 (italian version and same carrier), I can say that the connection don't switch automatically on 4g but keeps the H+ one. So i think is necessary a modification.
Solutions?
Is it necessary to flash an europe radio? or something else? I'd like to keep the stock rom Lg but is not a fundamental.
Baseband: M8974A - AAAANAZM - 1.0.190036
Kernel: 3.4.0
Build: JDQ39B
I have the g2 for two days. I know it very little. I do not have much knowledge about it. Some good soul can explain to me how to do?
I need your help!

Did you verify that the device has the correct radio bands for the lte on that carrier?

x714x said:
Did you verify that the device has the correct radio bands for the lte on that carrier?
Click to expand...
Click to collapse
I don't know how to check! On the box of g2: gsm 850/900/1800/1900; wcdma 850/900/1900/2100; LTE 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20).
My carrier is Tim but i don't kwow which band uses.
In secret menu/LTE Band section: avaible band 1,2,3,4,5,7,8,17,20,40. No one is selected.

Can i flash V10E firmware for Italy on V10C firmware for honk kong (actually on my device)?

Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.

x714x said:
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
Click to expand...
Click to collapse
maybe i should enable "band 3" in LTE setting in secret menu.

Hi,
I've a similar question and I hope someone could help me: I've a G2 phone using the D80210e-ESA-XX firmware.
In the product specifications, supported LTE frequency bands are 900/1800/2100/2600/850. I know that in Italy working frequency bands are 800/1800/2600. Now, my phone does not support 800 MHz: do you think is possible to upload a different firmware (IT or EUR ones) on my phone? With one of these firmware, does the device will work at 800 MHz?
Thank you so much.

I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!

zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you

madner81 said:
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
Click to expand...
Click to collapse
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should

zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Sent from my LG-D802 using Tapatalk

Does your country offer 4G networks? I'm in Kenya n any 4G device I ship in shows 4G even though we dont have it yet
Sent from my HTC One using XDA Premium 4 mobile app

popsi said:
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Click to expand...
Click to collapse
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...

madner81 said:
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
Click to expand...
Click to collapse
My friend i don't really know where in this forum the instructions for flashing a new stock firmware are... (I am also new in this community)
And i flashed it with Greek instructions so my link won't help you and i don't want to post some link i haven't tested by myself...
Sorry i hope you can understand!
At moment i have no time, but if I would be you I would search in the G2 Section for instructions!
They must definitely be somewhere!

Did you subscribe for LTE with your carrier?
Sent from my LG-D802 using Tapatalk

zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you

madner81 said:
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
Click to expand...
Click to collapse
Hi,
the procedure using the secret menu definitively works on my D80210e-ESA-XX, but I need to re-select it after every reboot.
Does anybody know how to make it permanent or how to automate this selection on boot (maybe using Tasker or something similar)?

zacharias99 said:
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
Click to expand...
Click to collapse
by flash, did you mean flash kdz of different region?

gpkumaran said:
by flash, did you mean flash kdz of different region?
Click to expand...
Click to collapse
yes exactly!
I flashed the European .kdz file!

I have an international G2 D802.. We, in india have certain operators in Band 40 LTE.. Is it possible to activate Band 40 in D802 by flashing D802T kdz in D802??? Kindly Help..

N-9005 to use for AT&T?

Just a very quick question...
I moved to US recently and bought AT&T sim, problem is i cant get any data in my Note 3 N9005 LTE international. can I install the AT&T firmware 900T to be able to get the data?
Any particular firmware version?
Thanks in advance.

No, you will brick your device. The reason you can't get data is because the international LTE is not the same frequency with AT&T frequency. Try switching your data to WCDMA (4G in Europe)

Official lollipop for Chinese versions Mate 7 (TL00, TL10, UL00, CL00)

reference: http://club.huawei.com/thread-5831618-1-1.html
What you need to know:
You need to be either on B133, or B3xx to upgrade. (xx means any number, like B312, B303......)
You need to have root/superuser removed to upgrade.
Upgrade might erase user data, to be safe backup first.
If you are not on the required versions, go to the download page, below the big blue "下载" button, there's a link:
版本: B133【EMUI3.0_Android4.4】...................
Click it to download and flash your B133
To download the upgrade ROM, click the big blue "下载" button.
download links:
MT7-TL00:
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=96
MT7-TL10:
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=97
MT7-UL00:
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=98
MT7-CL00:
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=95

Why not for L09 ?!?!?

XDADEVX said:
Why not for L09 ?!?!?
Click to expand...
Click to collapse
http://consumer.huawei.com/my/support/downloads/detail/index.htm?id=53957
Thank you alvinma! I've been waiting for this for a long time!

hi
can someone link me to the dload detailed explanation?
I downloaded the file, i created dload folder in the sd card, the updater couldnt notice it. nor when i placed it in the phone memory

MosheDrori said:
hi
can someone link me to the dload detailed explanation?
I downloaded the file, i created dload folder in the sd card, the updater couldnt notice it. nor when i placed it in the phone memory
Click to expand...
Click to collapse
you probably need to upzip to get the UPDATE.APP

Upxip? Means unzip?
And then to run an exe file? Did I understand you correctly?
I thought to locate the zip file in SD card\dload and to run the updater to local file.

MosheDrori said:
Upxip? Means unzip?
And then to run an exe file? Did I understand you correctly?
I thought to locate the zip file in SD card\dload and to run the updater to local file.
Click to expand...
Click to collapse
Make sure the UPDATE.APP is in the dload folder on the external sd card.
What I did was:
Power off my phone
Press and hold power, volume up, and volume down
Once the phone turns on, release power
Keep holding volume up and volume down until the firmware update starts automatically
Keep in mind that this will wipe all of your data, so you might want to backup.

Is this the final release or it's still on beta stage !?

Al-Mobarmge said:
Is this the final release or it's still on beta stage !?
Click to expand...
Click to collapse
Final
Send from Mate 7 using tapatalk

Managed to get lolli which is running smoothly, however I can not hide anymore the navigation bar...
Any solution?

Is there any way of using these Chinese versions in north america and have data speeds over 2G?
Thanks!

ecep said:
Managed to get lolli which is running smoothly, however I can not hide anymore the navigation bar...
Any solution?
Click to expand...
Click to collapse
If you followed the update guide found in the downloaded zip file and upgrade to lollipop from the recommended versions you should be fine.

chanthony said:
Is there any way of using these Chinese versions in north america and have data speeds over 2G?
Thanks!
Click to expand...
Click to collapse
These versions are for phones sold in main land Chinese only. Is your phone one of the four main land Chinese versions?(TL00, TL10, UL00, CL00)
Note: there's also a TL10 international version. If you have TL10 you probably have the international version.

alvinma said:
These versions are for phones sold in main land Chinese only. Is your phone one of the four main land Chinese versions?(TL00, TL10, UL00, CL00)
Note: there's also a TL10 international version. If you have TL10 you probably have the international version.
Click to expand...
Click to collapse
Unfortunately, I have the CL00 version. Would I be able to use the TL10 rom? Or flashing a portion of the rom?

I have TL10 from UAE region would I able to use chinese version on my phone ? I use malayiza version and some bugs happen to my phone also tell me how I remove this version

baso2000 said:
I have TL10 from UAE region would I able to use chinese version on my phone ? I use malayiza version and some bugs happen to my phone also tell me how I remove this version
Click to expand...
Click to collapse
you can't use the Chinese version
Sent from my HUAWEI MT7-L09 using Tapatalk

chanthony said:
Unfortunately, I have the CL00 version. Would I be able to use the TL10 rom? Or flashing a portion of the rom?
Click to expand...
Click to collapse
you should use the CL00 ROM then....
I will check for the 2G problem for you......What carrier are you on? which band is your carrier using for 3G and 4G?
Sent from my HUAWEI MT7-L09 using Tapatalk

alvinma said:
you should use the CL00 ROM then....
I will check for the 2G problem for you......What carrier are you on? which band is your carrier using for 3G and 4G?
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Currently Telus in Canada, however I would be able/willing to switch to either Bell or Rogers. Below are the bands for the three different carriers I found on the internet.
Telus
2G
CDMA 850/1900
EVDO 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
1x EV-DO CDMA2000
4G (called 4G+)
LTE 1700/2100
Bell
2G
CDMA 850/1900
EVDO 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
1x EV-DO CDMA2000
4G
LTE 1700
Rogers
2G
GSM 850/1900
GPRS 850/1900
EDGE 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
4G
LTE 1700

chanthony said:
Is there any way of using these Chinese versions in north america and have data speeds over 2G?
Thanks!
Click to expand...
Click to collapse
For HUAWEI MT7-CL00 sold and intend to be used in china mainland only then please consider the following:
4G network standard Telecommunications 4G (TDD-LTE / FDD-LTE)
3G network Telecom 3G (CDMA2000) / WCDMA (international roaming)
2G network standard Telecom 2G (CDMA) / Mobile / Unicom 2G (GSM)
Network standard Main card: Support China Telecom 4G / 3G / 2G; Deputy Card: Mobile / Unicom 2G; upper and lower slot can be arbitrarily selected one of the main card set
Network frequency 4G: TDD-LTE: Band 41 (100MHz), FDD-LTE: Band1 / 3 (B1 is limited to international roaming use); 3G: CDMA 800MHz 1X & EVDO, WCDMA / HSPA + / DC-HSDPA: 850/900/1900 / 2100MHz ( international roaming), DC-HSPA + 42Mbps: Band1 (international roaming); 2G: GSM / GPRS / EDGE: SIM1: 850/900/1800 / 1900MHz (international roaming), SIM2: 900/1800 / 1900MHz

ecep said:
For HUAWEI MT7-CL00 sold and intend to be used in china mainland only then please consider the following:
4G network standard Telecommunications 4G (TDD-LTE / FDD-LTE)
3G network Telecom 3G (CDMA2000) / WCDMA (international roaming)
2G network standard Telecom 2G (CDMA) / Mobile / Unicom 2G (GSM)
Network standard Main card: Support China Telecom 4G / 3G / 2G; Deputy Card: Mobile / Unicom 2G; upper and lower slot can be arbitrarily selected one of the main card set
Network frequency 4G: TDD-LTE: Band 41 (100MHz), FDD-LTE: Band1 / 3 (B1 is limited to international roaming use); 3G: CDMA 800MHz 1X & EVDO, WCDMA / HSPA + / DC-HSDPA: 850/900/1900 / 2100MHz ( international roaming), DC-HSPA + 42Mbps: Band1 (international roaming); 2G: GSM / GPRS / EDGE: SIM1: 850/900/1800 / 1900MHz (international roaming), SIM2: 900/1800 / 1900MHz
Click to expand...
Click to collapse
Is there anyway of allowing a different provider's SIM to be the main card?
Is there anyway to unlock the SIM? or flash with a different/custom ROM?

bsnl 3G 4G with non-indian phone

is there some special tuning to do to get efficient 3G 4G bsnl connection? I'm using a bsnl sim which was running nicely on a phone from indian market, but in my european lg v20 it most of the time connects to 2G, and download speed is low.

which variant do you have? I was having same issue. I have the at&t variant. Flashed a custom ROM and is working fine.

nirvikkhanal said:
which variant do you have? I was having same issue. I have the at&t variant. Flashed a custom ROM and is working fine.
Click to expand...
Click to collapse
h990ds, rooted following the dirtysanta procedure and using official rom v10g-ame-xx

How to unlock 4g bands for H910 in UK/Europe?

Hi there. I bought an 'unlocked' AT&T H910 LGV20 from ebay.
I thought would work in the UK as the phone hardware has compatible 4g bands that my provider (EE) uses.
The stock at&t firmware only allowed me to use 2g/Edge.
So I have flashed several other roms / kdz files using LGUP
( h910 Puerto Rico, H915 Canada, US996 unlocked US - variety of android 7 and android 8)
Some roms (particularly Android 7.0 Canada and Puerto Rico) work with 2g and 3g but there isn't even a 4G option in the base menus.
Some roms have global or allow you to select LTE/3Gpp but they don't allow me to get a 4g signal.
One even said 4g at the top but when I checked the connection in phone settings - about - it showed 3g (and this was consistent with the download speed too)
II only got videotron Canada to work. Bell and Rogers should have an overlapping 4g band but I got the CUST error on those roms.
I have tried going through service menu but all that can do is sometimes force a 3g signal from 2g
So what should I do?
1. I s there a rom with overlapping 4g bands that would work? Can I flash a HK rom onto H910?
2. Can I root the phone to unlock 4g bands?
Would this survive unrooting to allow me to access microsoft intune (for work email), banking and sports apps (which sometimes don't like root?)?
3. Would a custom rom work? Which do you recommend to keep as many features as possible eg remote control, camera, DAC?
Do they also work with microsoft intune, banking apps, sports apps etc?
I have followed a few of the posts out there but given the ebay seller I wonder if a few more people in Europe might have been tempted!
Thanks!

Hi
You need Band 20 (800) to use with EE UK and according to GSM Arena list of specs for the H910 that version of the V20 does not have it and I do not know if it can be added.

Stransky said:
Hi
You need Band 20 (800) to use with EE UK and according to GSM Arena list of specs for the H910 that version of the V20 does not have it and I do not know if it can be added.
Click to expand...
Click to collapse
Thank you!
I was led to believe the H910 (same as H915 in Canada) supported all of EE's 4g bands.
But for sure, the carriers seem to have locked some out. But not having any luck with other roms either...
I cannot post the url but
frequencycheck . com
carrier-compatibility/wwW4hXP/lg-h910-v20-lte-a-h915/ee-everything-everywhere-united-kingdom
Compatibility - 3 out of 3 bands supported
100%
Interface Name Supported by device?
LTE B3 (1800 +) Yes
LTE B7 (2600) Yes
LTE B20 (800 DD) Yes

As I said in previous post the H910 does not support Band 20 (800) check GSM Arena site select LG V20 and then H910 and select LTE bands and you will see that Band 20 is missing. The H915 is not listed.
Sent from my iPad using Tapatalk

@jamescarrick
I have a similar issue, having bought an "unlocked" H910 and having only 2G. Is this the file name of the H915 kdz file you flashed to enable 3G: "H91510e_00_VTR_CA_OP_1205.kdz"?
Thanks.