Dont use cheap chargers - Xperia Z1 Compact General

So with this thread I would like to tell you what happens when you use cheap magnetic chargers.
But most of all to WARN you to be careful, because I didn't have any indication or even heard that this was possible before it happened to me.
I got my new phone twenty something days ago and today I got my cheap magnetic charger from ebay.
Not knowing there is a significant importance in the way you plug it, I managed to do it the wrong way....
What happened:
The phone shut itself off.
When connected to the wall plug it only flashes in red.
When connected to PC (win 7 64x) it pulses slowly but still no go.
When you try to flash firmware - not recognized.
When you try hard reset (volume up key + power button) - no go.
When you try the hard reset red button next to sim holder (I didn't even knew it existed) - again no go.
When you try pressing every button and praying - no go.
When you curse and threaten it so loudly that your neighbors call the police - no go.
I will try 2 more things - discharging the battery completely and charging it again over night to see what happens. If any improvements appear or don't I will edit the thread so you can learn from my misfortune and hopefully avert one of your own.
And now for the fun part:
Q: What does a XZ1c + cheap magnetic charger add up to ?
A: Red Christmas lights.
Q: What happens if you do the same thing as me?
A: You teach your phone to play dead.
Q: What should you say if people ask if your phone is bricked?
A: Tell them that you googled images of dark chocolate
And if you want to know how the cable looks like here's a link - next to it you can see burned to black 200 euros :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update
Phone is completely and utterly bricked.
Discharging and charging has no effect.
Flashtool doesn't recognize the phone when I want to flash ftf.
Another person with the same issue contacted me, he told me that these are the signs of a burned mobo, in his case the lcd was a goner too...
So now you know, please if you read this be careful, this could happen to other xperias with magnetic charging I suppose
For the people that posted up till now:
im not sure the cheap carger cause this... could be other harware failure or even sw.
Click to expand...
Click to collapse
unfortunately it's from the charger
It seems the problem is you plugging it in the wrong way. Not the charger....
Click to expand...
Click to collapse
50% correct, the problem is that these chargers are not supposed to be connectable in other ways, the cheap ones are however...
I have cheap magnetic cable and it's awesome you can't plug it in a wrong way hehe you must be lucky guy if you have done this hehe.
Click to expand...
Click to collapse
40% luck and 60% skill
Thankfully mine didn't suffer any permanent damage
Click to expand...
Click to collapse
lucky b*stard
bought that adapter:
Click to expand...
Click to collapse
just know there is a possibility of this happening
Hmm very strange because in my case I can't plug my charger in other way it's simply impossible hehe I have +,- signs too
Click to expand...
Click to collapse
a picture is worth a thousand words, now I see a big difference, my charging pins are hanging out if the plastic, making the contact much more easier, with yours it would be difficult
Same thing happened to my phone
Click to expand...
Click to collapse
no boot at all in my case, hopefully yours will be OK
christmas tree an extra light.
Click to expand...
Click to collapse
haha I said exactly the same
So my new Z1C is on its way, this time I bought a used one, so if it dies I wouldn't be so angry
There is saying in Bulgarian that is: What a person does to himself cannot be done to him by another.
So I could only wish you happiness and no trouble with magnetic chargers

im not sure the cheap carger cause this... could be other harware failure or even sw.

It seems the problem is you plugging it in the wrong way. Not the charger....

I have cheap magnetic cable and it's awesome you can't plug it in a wrong way hehe you must be lucky guy if you have done this hehe. People learns on mistakes get your phone on warranty and tell that it bricked while performing update via pc companion it should works

mosespl said:
I have cheap magnetic cable and it's awesome you can't plug it in a wrong way hehe you must be lucky guy if you have done this hehe. People learns on mistakes get your phone on warranty and tell that it bricked while performing update via pc companion it should works
Click to expand...
Click to collapse
You most definitely can plug the Chinese fakes in the wrong way. Virtually no extra force required, and the phone instantly crashes/reboots.
Thankfully mine didn't suffer any permanent damage

Strange...
I bought that adapter: http://www.dx.com/p/aluminum-alloy-...dapter-for-sony-z1-z1-mini-more-silver-320911
It's working like a charm... No problems at all, charging time is the same... :highfive:

Darkimmortal said:
You most definitely can plug the Chinese fakes in the wrong way. Virtually no extra force required, and the phone instantly crashes/reboots.
Thankfully mine didn't suffer any permanent damage
Click to expand...
Click to collapse
Hmm very strange because in my case I can't plug my charger in other way it's simply impossible hehe I have +,- signs too. When I will be at home i will make screenshots with my cable but if phone got bricked it can be send on warranty without problem.

As you can see (or not) ;p in my Chinese charger cable I have two different plug wholes and because of that I can't plug my charger in different way as normal way i bought it for 5 euro 6 months ago and for now it charge fast as normal stock charger so for me good deal

Same thing happened to my phone, though it came back after a while after hitting the red button.
Timeline:
- slept with phone at ~70%
- woke up to a phone that is turned off
- no LED when charged through the magnetic charger or the USB port
- PC does not recognize phone
- held power button: no response. Held power+down: no response. Pressed red button: no response.
- left phone plugged in to PC while I google around
- phone vibrates and boots but fails to boot completely
- tried to interrupt to recovery which works; perform a full restore
- phone able to reboot completely
Here's the strange part
- plug magnetic charger
- see temperature ramp up quickly from ~33c to 38-39c and fluctuate quickly from 37-39c; same result with other apps
- use original cable+original charger: sticks at 33c
Suffice to say I'm back to USB charging

Same thing happened here i got the same cheap magnetic charger - which doesnt always work at all- and i accidentally snapped it the opposite way 2 times the first the screen flash but nothing else happened..the 2nd it shut down and wouldnt turn back on...i froze too and then i googled about hard reset and it came alive again...after that i went to add my christmas tree an extra light..

I do use a cheap magnetic charger cable for months and have no problems with it!

update - the phone is dead, original post edited

st3ch said:
Another person with the same issue contacted me, he told me that these are the sings of a burned mobo, in his case the lcd was a goner too...
Click to expand...
Click to collapse
Fuark.
Alright in my case windows recognizes that a device (I forgot what windows called it) is present when I plugged it in.
This problem would have been avoided if Sony actually sold genuine cables themselves (they don't sell in my country) instead of just the dock (which you couldn't use with a large number of common cases.)

mosespl said:
As you can see (or not) ;p in my Chinese charger cable I have two different plug wholes and because of that I can't plug my charger in different way as normal way i bought it for 5 euro 6 months ago and for now it charge fast as normal stock charger so for me good deal
Click to expand...
Click to collapse
Congrats, you got one where the metal contacts are correctly recessed far enough. On some, despite the different shaped plastic on each pin, the metal sticks out far enough to still make contact

Related

RED LED of Death - Guide to get phone back up and running

Hey all,
Surely at some point we have all gone to pick up our x10's and seen nothing on the screen and a blinking red led when you try to turn it on.
Immediatly thoughts of Phone Death and End of the World will undoubtably echo through our minds. Fear not!
Well, this happened to me on the weekend again (a few times now) so i thought i'd try a few different ways of getting it back up again and i think i nailed it first go
1. Yank battery out
2. connect charger and wait for green charging led
3. insert battery and wait for charging icon to appear in screen* (SE logo first, then Charging screen)
4. power phone on with cable still connected. Phone will boot as normal and continue charging.
5. celebrate avoidance of mobile technology isolation with a few cold ones
Hope that helps someone!
* For what its worth, i am running Zdzihu's 2.2 Beta4, but i think this should work on most. Only thing that might be different would be the charging icon does not appear on some ROMS. That i cannot answer but is probably worth a shot anyway
Tim.
Hasn't happened to me yet. Do you let your battery get fully drained?
Sent from my X10i using XDA app - FX10B4
violentgoomba said:
Hasn't happened to me yet. Do you let your battery get fully drained?
Sent from my X10i using XDA app - FX10B4
Click to expand...
Click to collapse
did happen that way once, was not anywhere near anything remotely power generating (camping) but this last time was still on 70% charge and on charge via USB at the time. weird!
Ok that sounds alarming. I'll keep an eye out for this on my x10
Sent from my X10i using XDA app - FX10B4
Hi,
I am facing the same issue as mentioned above but unable to resolve it.
I tried the steps mentioned:
1. Yanked battery out
2. connected charger and waited for green charging led
But for me the green charging led does not come up!!
What could be the issue?
I don't quite understand. Are you saying that X10's are just suddenly and mysteriously dying? I've never heard of this or had it happen to me on stock firmware. The way you described it sounds like you always leave your screen on. Maybe that's the problem, or it's because 2.2 custom ROMs are completely stable yet? :Confused?
sumtimes strange things happens
i charged the battery completly 100% den wipeout the battery
rubb it in my palmm ...insert it back
turn on the phone it says 3 % charged RED led starts blinking
ahahahahahahaha..
wipe out battery rub again placing it back it says 100%
Rohveric said:
Hi,
I am facing the same issue as mentioned above but unable to resolve it.
I tried the steps mentioned:
1. Yanked battery out
2. connected charger and waited for green charging led
But for me the green charging led does not come up!!
What could be the issue?
Click to expand...
Click to collapse
Or it could be that your USB port is broken.
same issue...
i don't think usb is broken...coz the phone went dead when i was playing a game...there was no issue with the usb port then...
when i charge the RED light blinks...
if i remove the battery and place it back and swith it on RED light blinks again but for 3 times....and no display....
i've been searchin solution for this issue on sonyericsson support forums and xda support forums but no solution that i came across works...
does this mean that xperia x10 dies just by playing games? phone freezes and dies....weird!!
this was some time ago for me, and has not happened since, but i was thinking about it recently and i was actually thinking it was heat related. i was charging (at the time it died last time) via usb-pc connection, and that always gets really hot. maybe its a thermal heat saving thing?
mrtim123 said:
this was some time ago for me, and has not happened since, but i was thinking about it recently and i was actually thinking it was heat related. i was charging (at the time it died last time) via usb-pc connection, and that always gets really hot. maybe its a thermal heat saving thing?
Click to expand...
Click to collapse
You should avoid charging via usb on PC...it never charges battery properly and is recommended when you only want to charge your phone to do it via charger, not PC usb.
simacid said:
You should avoid charging via usb on PC...it never charges battery properly and is recommended when you only want to charge your phone to do it via charger, not PC usb.
Click to expand...
Click to collapse
Where is the data on this?
I just discovered as of yesterday, that my Lenovo (IBM) Thinkpad T400 only has one good USB port as far as my X10a is concerned. The other 2 ports appear to connect, but the charge still falls down.
My best port is on the left side, further back of the two.
I am using rendeiro2005's [MOD/ROM)scamble_v01[CM6.1.3][30MAR]
http://forum.xda-developers.com/showthread.php?t=1015765
I am attempting a portion of the cycle of power as noted here:
http://forum.xda-developers.com/showthread.php?t=1010070
# Unplug Charger and do not plug back in until your phone dies
# Reboot into recovery once it is dead by connecting charger
# Wipe battery stats
# Charge to 100% and repeat the discharging, wiping, and charging process about 3-5 times
In attempt to make sure my battery was drained, I kept turning my phone on.
This led to my flashing red LED of death.
I attempted this workaround, but it didn't work exactly, but close enough.
I had to pop the battery out and in and disconnect usb a few times and back in until it started charging.....
simacid said:
You should avoid charging via usb on PC...it never charges battery properly and is recommended when you only want to charge your phone to do it via charger, not PC usb.
Click to expand...
Click to collapse
yep, i generally do, but i was away on a trip and only had access to a pc/usb for charging (forgot my AC charger!)
Red flash of death:
For me it was because the connector on my phone(!), was broken.
So I send it back for repair.
A friend of mine had exact the same.
Vodafone is currently repairing mine, and made a photo of what was broken. ;p
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now the wait till they repair it and send it back to me
x10 not charging, not working at all
when i got my x10 which was sent to me thru dhl, i saw it was working before it was placed inside the box then when i get it just this morning i tried to power it on but it didn't so i charged it but nothing happened. Even the led indicator is not blinking so i tried to buy a new one. there, the indicator blinks when i power it up but still didn't work. i tried to charge my original battery thru usb for more thn 2 hours and charge it thru clipped charger for almost half day now but nothing happened. issue is still persisting. can somebody help me with these?
haha.. this had happen to me be4 when i flash to custom ROM. and tht time my phone battery was 34%. After flash. it show only 10% ._. how funny it is..
mrtim123 said:
Hey all,
Surely at some point we have all gone to pick up our x10's and seen nothing on the screen and a blinking red led when you try to turn it on.
Immediatly thoughts of Phone Death and End of the World will undoubtably echo through our minds. Fear not!
Well, this happened to me on the weekend again (a few times now) so i thought i'd try a few different ways of getting it back up again and i think i nailed it first go
1. Yank battery out
2. connect charger and wait for green charging led
3. insert battery and wait for charging icon to appear in screen* (SE logo first, then Charging screen)
4. power phone on with cable still connected. Phone will boot as normal and continue charging.
5. celebrate avoidance of mobile technology isolation with a few cold ones
Hope that helps someone!
* For what its worth, i am running Zdzihu's 2.2 Beta4, but i think this should work on most. Only thing that might be different would be the charging icon does not appear on some ROMS. That i cannot answer but is probably worth a shot anyway
Tim.
Click to expand...
Click to collapse
i tried using these steps but nothing happened. the green led lights up but after a minute is goes out and then nothing happened.
what else can i do to turn my x10 on? i'm really losing hope for this phone. really disappointed. and i don't wanna say these but i'm starting to hate sony ericsson for not responding to these issue. i've read from different forums from different sites that a lot of same issue is happening to same brand and model yet all of these haven't responded even a single solution and that's really frustrating.
i have the same issue phone turns on on some point but battery keeps on 0% even if i charge it for more than 2 hours it doesnot goes past 0%..............I tried the genuine charger and everything
Rohveric said:
Hi,
I am facing the same issue as mentioned above but unable to resolve it.
I tried the steps mentioned:
1. Yanked battery out
2. connected charger and waited for green charging led
But for me the green charging led does not come up!!
What could be the issue?
Click to expand...
Click to collapse
i am in the same boat. had more than 70% when mine died... now all it does is the flashing light thing...
i kno the usb port works b/c ONE time out of probably about a 100 that i've tried, it actually worked and brought me to the charging battery screen then immediately died again...
i can't seem to get the phone to go to xRecovery OR boot into flash mode...
this is all very upsetting... what to do?
Is this topic still alive.i v the same issue like other frends told.my x10 is dead.when i press power button it vibrates for less than a sec and then ..... no life.

low temperature unable to charge battery

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a problem with charging the battery
I do not know why What should I do?
Rom D80210B_00 (Thailand) :crying:
This is something new. I have never seen this before.
:crying:
Same Issue
I am having the exact same issue on my G2. I have it in a repair shop currently and I will let you know what they find out. Have you dropped or damaged your phone in any way? Mine only started doing this after I dropped it and cracked the screen. I have the screen repaired and then that error message started showing up. I figured I would reset the phone and see if it made the error message go away, well when I turned the phone off...it wouldnt turn back on. so i took it to the repair shop and they fixed it!
It turns on no problem and the new screen is perfect. well, that was for about 2 days, then the error messaged popped up again, I reset the phone, it powered right back on and the message was gone. the next day, same Low Temp message AGAIN! I reset the phone and it would not power back on. Its at the repair shop again, 3rd time in a week, to try and figure it out. I'll keep ya posted and if you fix yours let me know!
-Adam
LG G2 "Solved it" low temperature unable to charge battery
Hi,
I too had the same problems as you, also after i received the Phone back after fixing an broken screen.
The Phone says it's charging, but it isn't.
I noticed a very very thin gab on the left top of the back cover.
I opened the Phone, and saw that the top cover (where the power buttun is) wasn't at his precise place.
It really was a fraction of a millimeter, but still.
I unscrewed it and noticed that there is a very very thin line for the corners, so to get it good on his place you have to first put in the corners of the plate then lower it before screwing it back tight.
Now my back cover closed correctly everywhere.
I put in the charger and voilla, it charged again like it should..:good:
i hope this can help you people somehow.
Good luck.
huff
Problem Update
Adam,
I have the same problem, do you have any update?
Is it fixed or NOT?
and if fixed what was the problem?
Regards,
Hello.
I'm having this problem on AT&T G2 (D800). Yesterday I tried to put a hair dryer on the back for a while and started to charge until it was 100%, now it was on 26% of charge and plugged it but started to show the message again. Then I tried another shot with the hair dryer but didn't worked this time.
Also I tried to restart the phone but it never power back on. Does anyone have a solution? It's really dissapointing having a $400 paperweight.
BTW, ask for a replacement is not an option.
danielr410 said:
Hello.
I'm having this problem on AT&T G2 (D800). Yesterday I tried to put a hair dryer on the back for a while and started to charge until it was 100%, now it was on 26% of charge and plugged it but started to show the message again. Then I tried another shot with the hair dryer but didn't worked this time.
Also I tried to restart the phone but it never power back on. Does anyone have a solution? It's really dissapointing having a $400 paperweight.
BTW, ask for a replacement is not an option.
Click to expand...
Click to collapse
So, this just happend to me, Same problem with "low temperature unable to charge", I tried to restart my phone. but it went off and didnt come back on, Did YOU find a solution??
Lg g2 screen crack low temperature no charge
I am having the same exact issue. Screen cracked and after being fixed gave me that low temp message. Now it won't turnon. Anybody have any fixes???
please somebody try install (or just connect and try to power on with) another battery. PM me after replacement, to tell result.
Hi I have same issue....sometime when I unconnect the battery then it works and shows normal temp of the battery and charging works .... but later it shows -30C (-22F) ...and phone wont turn on I must open cover and disconnect/connect battery...I dont know where is the sensor for the battery temp....I also try to bend a connector on motherboard then its works..but after several days it wont turn on/charge....(I bend only two connector for + and - the third connector was to small) ..... I think the issue was only the sensor but dont knows where is it.....
Same problem, only I press really hard on the power/vol buttons sometimes fixes the temp.
It seems to be a deep rooted function of the phone since if the sensor detects -30 Deg C while off, it won't allow you to turn it on.. but i'd really like some kind of kernel mod or something that can fix this
found a solution ...
the problem is related to the battery temperature sensor .. i tried everything like hairdryer ... reassembling the phone etc but nothing worked
than i came to to a solution when i was moving through the service menu (launched by the code 3845#*800# as my device is d800 for other models code will be like 3845#*model no# eg; for d801 put 801 in place of model no )
now you can move to setting tab
than in setting press battery tab
here press battery fake mode and turn it on
thats it now it will charge ....
however it will show always a fixed level of battery like 80% or something else but it will charge ....
if you want to see how much it has charged just turn off the fake battery mode and it will show you how much battery is there ....
if it works and you got your phone working and useful again you can donate me a beer ...... on paypal [email protected]
Hello dears
The same problem happened with me (low battery temprature ,unable to charge battery) .I installed Avira antivirus and scanned all files on the memory and 4 hidden viruses were caught and deleted , then the mobile returned back to its normal trend and charging normally
2nd Solution maybe...
I have same issue like you guys, I bought used G2 and the phone has got an new LCD , the first owner send the phone to official LG repair service to prague,but they said tho mobo is dead.Then I bought the phone and removed the screw near the battery and it works perfectly.Try and will see ..... sorry for my bad english
Found temp sensor on the back cover
I´ve found a solution.
The temperature sensor is on the bottom of the back cover, you will see two small contacts there.
I got the phone to charge by removing the cover, and shorting these contacts while plugging in the charger.
I think this bypasses the initial temp test, and so it charges. (Doesn't charge just without cover)
If this works for you, then changing the back cover should solve the problem for good. (Or until the new sensor breaks too)
If it doesn`t, then my money is on changing the battery flex.
Do not try to short the contacts permanently, that would remove all temperature protections and batteries can get explosive if overheated.
Good luck,
Camo
i have same problem but i m using verizon so can anyone tell me how to i fix it?

Galaxy S8 Won't Charge When Powered Off

The problem:
When my S8 is turned off and plugged in (yes, stock charger), the device won't charge. The charging icon show on the screen nor will the LED indicator light up. However, the device will still charge while it's ON (with the same charger).
This matter hasn't really been pressing because I rarely run out of battery. However, the few times I drain the battery completely, it's been extremely hard to turn the device on again. I'll have to trickle charge it and then turn the device on, hope the device doesn't die while turning on, and only then will the S8 start charging normally.
A ton more details:
Sometimes, I'll see a charging warning that there is water in the port. I think that this entire problem has arisen from the device thinking that there is water in the port, but I don't see why it would refuse to charge only when the device is turned off. My device has not been in water for 3-4 months.
This problem has been ongoing for 3-4 months
If turned off, the device will still charge WIRELESSLY
When I plug in the charger while the device is off, there's a small horizontal line on the screen that will light up every few seconds. I'm assuming that this is a boot loop due to charge failure.
I've been "trickle charging" the device by holding the power down and volume down button to start the bootloader. I'm unsure if this is a permanent solution, though, and it is not quite consistent.
Thanks in advance.
bump
bump 2
I have the same problem buddy.
I don't know how to fix that.
did you manage to fix it ?
p.s : I just bought this phone.
Sounds defective, I'd contact Samsung about a warranty repair.
Have the exact same issue. It will wireless charge when off, though.
Won't fast charge when on.
All the problems started when all of a sudden I got the old "moisture" in USB warning.
Got rid of that and downhill from there.
This started around 21 January, but the not charging when off, and slow charging seemed to have come on at a later stage.
Not impressed as I tend to baby my phones.
I have the same issue.
If i quickly press the power button while it's turned off and immediatly plug the charger, the phone shows the moisture warning and starts to vibrate.
The phone has never been exposed to moisture. I already tried to clean the usb and jack ports, and i also cleaned the usb app without success.
Any idea before a factory reset or rma?
I had exactly the same problem as Spike96.It seems it's a software problem from Samsung.I tried everything on the net to fix it,including talking to Samsung,nothing worked.I then systematically went through the entire usb programs and settings-FINALLY I found the problem,the USB audio routing when turned on,,causes the USB failure,go to developer options,disable USB audio routing,and your phone will charge as it should when powered off
12 hours later problem returned
U have to turn off " Varify apps via USB" in developers option, as well.
I had the same problem and just fixed it by clicking every option and found the luck.
Came here because I also have this problem now. Which unfortunately happened to start the DAY AFTER I pre-ordered the S10+ with my S8 included as part exchange.
If the phone is off, it says theres moisture in the port and wont charge. If I hold volume down and power, it resets and turns on like normal and charges like normal. Phone has been exposed to water in the past but not in the last few days. Strange that it says there's moisture when the phone is off.
Same issue over here. No quick charge and it won't charge when my phone is off. It also won't turn on with the charging cable is connected, I have to disconnect it before I'm able to turn on my phone.
Tried fully cleaning all my phone ports with a wooden toothpick and some alcohol, but without luck. (Had a charging issue before, with another phone, and this is what fixed it)
After reading this tread I changed the developer options, but I still have the problem.
I also recorded a bug report, but I got a really big file out of it and I can't find anything regarding the phone charging.
Are there any other suggestions for things I can try without having to factory reset my phone?
Any suggestion is welcome.
I've noticed that sometimes after i unplug the phone from the charger (obv i can charge only if it's on) the warning appears.
Do you think that a custom rom would solve the problem?
MrRanza said:
I've noticed that sometimes after i unplug the phone from the charger (obv i can charge only if it's on) the warning appears.
Do you think that a custom rom would solve the problem?
Click to expand...
Click to collapse
No. I have lineageos 16, but the problem is present.
Superweird problem. I always had this problem, when the phone was fully off it would not charge unless I powered it on first.
Disabling "USB audio routing" PLUS disabling "Verify apps via USB" in developer options like suggested fixed this for me!
I've got the same issue, and I have been dealing with this for over 2 years now. I initially thought my phone was gone for good because it wouldn't turn on at all, flash me a working screen, or vibrate like it usually does. So, I just kept it hidden in my cabinet for almost a year.
When I remembered I had this S8+ device, I decided to take one more look at it and it finally turned on!.. Well, the charging icon before actually being turned on did, at least. However, like @Spike96, @MrRanza, @AC5L4T3R, and @IkBenNietHier mentioned, the off charging screen showed a water-in-port warning below the charging icon and would vibrate non-stop — and not charge too, of course. Here's a picture of what the screen looks like on the device:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I later then found that either hard resetting the device or using a wireless charger would pretty much fix the issue, but again, like @Spike96 presumed, it isn't a permanent solution and isn't very consistent, because I've noticed that the longer I leave my S8+ uncharged and dead, the harder it is to get it starting again. I'm quite relieved, though, that a lot of other people are experiencing this predicament, as well, because I know I'm not alone with having this annoying issue anymore.
A couple of people in this thread suggested going to Developer Options > Debugging: disable Verify apps via USB + Media: Prevent USB audio routing, but my Verify apps via USB was always disabled (by default, unless I turn Debugging: USB debugging on), and doing the given steps did nothing for me. I appreciate the help a lot, though, but I'm still stuck with the same problem...
Actually, it's worse now — for some reason, after turning my phone off to see if it'll charge, it now won't react to any of the button combinations except for Odin mode (volume down + power key + Bixby key). I'll just try again some other time — this happens a lot, anyway...
I faced exactly similar issue with s9+ around a year back .... I tried cleaning the port etc and flashing custom rom ... Nothinh fixed the issue .... Wireless charging worked fine .... Finally i got the usb port changed and it fixed this issue ...

Phone not charging, stuck at 1% after factory reset

Hi everyone,
My Axon 7 is not charging at all after I did a factory reset. The phone is almost 2 years old and battery was degrading a lot so I went and decided to do a factory reset. It was at 50% and charging fine before I hit reset, but once I reset and came to the setup screen, I noticed the battery showed 1% which was weird. I then unplugged the charger and it immediately died. Turning it on without charger will automatically turn off.
The phone does show the red led light and charging icon but no matter what it will stay at 1%.
Here's what I've tried so far:
-Change cable/charger
-Left overnight charging with phone on
-Left overnight charging with phone off
-Reset phone/wipe cache many times
I have always been on stock A2017U and wondering if flashing another ROM may help?
If anyone have tips on how I can revive my Axon 7 that would be appreciated. I really don't want to retire it yet.
Two years? Consider replacing the battery? The degradation on this thing is horrendous.
Hamburgle4 said:
Two years? Consider replacing the battery? The degradation on this thing is horrendous.
Click to expand...
Click to collapse
Uh no.Even with degraded battery,it should not stick to 1%.
---------- Post added at 01:07 PM ---------- Previous post was at 01:04 PM ----------
krazemonkey said:
Hi everyone,
My Axon 7 is not charging at all after I did a factory reset. The phone is almost 2 years old and battery was degrading a lot so I went and decided to do a factory reset. It was at 50% and charging fine before I hit reset, but once I reset and came to the setup screen, I noticed the battery showed 1% which was weird. I then unplugged the charger and it immediately died. Turning it on without charger will automatically turn off.
The phone does show the red led light and charging icon but no matter what it will stay at 1%.
Here's what I've tried so far:
-Change cable/charger
-Left overnight charging with phone on
-Left overnight charging with phone off
-Reset phone/wipe cache many times
I have always been on stock A2017U and wondering if flashing another ROM may help?
If anyone have tips on how I can revive my Axon 7 that would be appreciated. I really don't want to retire it yet.
Click to expand...
Click to collapse
If i were you,i should flash twrp,boot in twrp,wipe all partitions,boot in twrp.See battery now and flash custom ROM maybe
krazemonkey said:
Hi everyone,
My Axon 7 is not charging at all after I did a factory reset. The phone is almost 2 years old and battery was degrading a lot so I went and decided to do a factory reset. It was at 50% and charging fine before I hit reset, but once I reset and came to the setup screen, I noticed the battery showed 1% which was weird. I then unplugged the charger and it immediately died. Turning it on without charger will automatically turn off.
The phone does show the red led light and charging icon but no matter what it will stay at 1%.
Here's what I've tried so far:
-Change cable/charger
-Left overnight charging with phone on
-Left overnight charging with phone off
-Reset phone/wipe cache many times
I have always been on stock A2017U and wondering if flashing another ROM may help?
If anyone have tips on how I can revive my Axon 7 that would be appreciated. I really don't want to retire it yet.
Click to expand...
Click to collapse
if i were you, i'd ignore this predatorhaze guy...
Whatever you do, I'd say go for it, buy a new battery. It won't be for nothing.
But on the matter at hand: This comes down to charging mechanics. Your battery will charge with a set voltage (usually 4.4V) after the fastest stretch which is constant-current fast charge. If your phone stays on, you should check a couple of things to be sure that the phone is trying to charge at least.
First of all download Ampere, it'll show you the charge rate and battery voltage. You should leave it charging for a minute with the app open, and check how much current goes through. The battery voltage should be reported below as well. Then disconnect the charger, and see if you can see what the voltage says. If it is below 3.3 V then BCL (Software that controls some battery-related functions, one of which is this brown-out protection that turns the phone off after a certain voltage) will shut down the phone. Degraded batteries have certain physical properties that make them heat more and have serious voltage dips when a sizable current is demanded, something which Predatorhaze here doesn't seem to understand.
Now, you could try to disable BCL completely by simply adding root to the mix and running some commands that Infy_AsiX posted in the BCL degradation thread, this is obviously temporary if your battery is past the point of charging but it's possible. no need to switch ROMs although that might not be as bad.
This happens to me too, sometimes. Shockingly enough, once I charge it via USB cable from my laptop (I have an ASUS ROG G750JS, if that matters) , the charging picks up. Moment it crosses 36%, I can now charge it via the wall charger again; I'm careful now not to let my phone die down anymore.
I should change the battery, but I'm planning on selling this thing by February anyway and want to give the buyer a new battery altogether, by then.
Choose an username... said:
if i were you, i'd ignore this predatorhaze guy...
Whatever you do, I'd say go for it, buy a new battery. It won't be for nothing.
But on the matter at hand: This comes down to charging mechanics. Your battery will charge with a set voltage (usually 4.4V) after the fastest stretch which is constant-current fast charge. If your phone stays on, you should check a couple of things to be sure that the phone is trying to charge at least.
First of all download Ampere, it'll show you the charge rate and battery voltage. You should leave it charging for a minute with the app open, and check how much current goes through. The battery voltage should be reported below as well. Then disconnect the charger, and see if you can see what the voltage says. If it is below 3.3 V then BCL (Software that controls some battery-related functions, one of which is this brown-out protection that turns the phone off after a certain voltage) will shut down the phone. Degraded batteries have certain physical properties that make them heat more and have serious voltage dips when a sizable current is demanded, something which Predatorhaze here doesn't seem to understand.
Now, you could try to disable BCL completely by simply adding root to the mix and running some commands that Infy_AsiX posted in the BCL degradation thread, this is obviously temporary if your battery is past the point of charging but it's possible. no need to switch ROMs although that might not be as bad.
Click to expand...
Click to collapse
Here's readout from Ampere at 4.4v but the mA is very low. I couldn't get a proper readout after unplugging the phone as it dies immediately before it could measure.
Thanks for the post, will try to root and perform the BCL methods, if doesn't work ill try to flash LOS.
Just wanted to exhaust my options before replacing battery, seems tough to do and could be the motherboard or something else at fault.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KwesiJnr said:
This happens to me too, sometimes. Shockingly enough, once I charge it via USB cable from my laptop (I have an ASUS ROG G750JS, if that matters) , the charging picks up. Moment it crosses 36%, I can now charge it via the wall charger again; I'm careful now not to let my phone die down anymore.
I should change the battery, but I'm planning on selling this thing by February anyway and want to give the buyer a new battery altogether, by then.
Click to expand...
Click to collapse
Unfortunately this doesn't work for me either, I left it for a whole day while at work charging through pc, same symptoms
krazemonkey said:
Here's readout from Ampere at 4.4v but the mA is very low. I couldn't get a proper readout after unplugging the phone as it dies immediately before it could measure.
Thanks for the post, will try to root and perform the BCL methods, if doesn't work ill try to flash LOS.
Just wanted to exhaust my options before replacing battery, seems tough to do and could be the motherboard or something else at fault.
Unfortunately this doesn't work for me either, I left it for a whole day while at work charging through pc, same symptoms
Click to expand...
Click to collapse
well, if anything, the battery swap is extremely easy on this phone
You don't even need to use heat on the grilles, just use something very sharp like a craft knife on the right corners of the grilles, pry upwards, then very carefully use a flat screwdriver or something like that. if you have the gold one, the grilles are very flexible, unlikely that you'll do any damage. If you have the gray model you'll need to be extremely careful with the top grille where you have the hole because it'll probably snap there.
Then take the screws off (6), open just slightly, take the fp cable sensor off carefully, take one more screw off, pry the battery, insert new one
You can watch JerryRigEverything's disassembly video to know every step of the process, it's useful for that
Finally I've managed to get the phone charging.
Flashed LOS but didn't remediate the issue, although TWRP does show 73%, phone dies after booting up.
So I attempted to go back to stock again. Voila this time turning on the phone, battery started to go up, unplugging holds.
However, issue remain is that charging now is significantly slower even though it is showing fast charging, and once it hits 75% it takes roughly an hour and a half to 2 hours to get to 100%.
I guess I will see how it goes for the next week or so and if battery performs poorly I will go ahead and buy a replacement battery.

Battery charging problem

Hi there,
I have a Leeco Le Pro 3 x720 running Lineage OS 17.1 (last version) . I was very happy with it but recently it is giving me a good headache due to the next battery charging problem.
This is a description on how the phone behaves depending on the situation:
* if the phone is powered off -> it just charges fine .
Once the phone is charging at this stage, if it boots while charging, it keeps charging until it is unplugged. This is perfectly right.
* But if the phone is already powered on, with no charging cable plugged, there are two behaviors depending on the charger:
** chargers that only can charge if they are plugged when the phone is powered off: if the phone boots connected to this kind of chargers, it charges and works as usual until they are unplugged. But they won't charge at all If they are plugged once the phone is on. I have no idea about what is happening in this case
** chargers that can charge anyway: if these chargers are plugged once the phone is on, the battery charging logo doesn't show the battery logo charging ray that means the phone is charging, but the phone is actually charging. The battery logo won't update the battery level shown, it will just stay at the last battery level, the battery level won't rise at all. In example, the battery level shown stays at 50%, and when the battery drops from that level, it goes down as usual, but it never shows a higher battery level, it is not going to show a 51% battery level. Only if the phone is rebooted, the battery level logo will show the right battery level. Looks like the phone is not detecting it is charging, although it is actually charging.
This behavior don't depend on the battery charger watts:
- I have some 10 Watts and 24 Watts battery chargers made by Amazon, Leeco, Samsung, that work in the first way described (they only work if they are plugged at boot time), and
- I have a 10 Watts battery charger made by Aukru that works the second way described, (it charges anyway).
I have tried wiping and reinstalling the Lineage ROM using TWRP but this didn't fix the problem.
At the beginning I thought it was a software issue but now I have no idea.
EDIT: I noticed that each time a system update was applied, the next time the phone boots, the charging worked without any problem. Charging whenever it was plugged to the battery charger. After that, the next time the system reboots it works in the way described above.
Questions:
- is this a software issue or a hardware issue?
- Could you explain what is happening?
- How could I fix it?
Thanks in advance.
Regards!
I have a quite similar situation.
Mi Le Pro 3 stopped charging, just charges when the battery completely drains and the phone turns off.
Once I turn the phone on it keeps charging but if it´s unplugged it stops charging until the battery is completely drained again.
I´ll reinstall LOS 17.1 again, if it doesn´t work I´ll try with 18.1.
I´ll let you know any update.
I've had the same/similiar problem it seems since I've had the phone almost. I got the phone in July of 2018, and within a week of getting it a dropped it in the toilet (feel free to laugh). Let it dry, and it's still worked ever since. I just don't know if that could cause issues down the road or not. I figured when it comes to water, it's either screwed, or not, but I don't know enuff about how that works. Anyways, I used the phone for a little less than a year and got another phone, and rarely used it since. Started using it again recently, and there's the usual problem with some cords or chargers not working for it. And then there's the phone either reading the battery information wrong, or it's getting fed the wrong information, regarding battery level as well as charge time left. Like, it's said 2% charging, 2 min left till full ha. Almost the phone likes to randomly shut off, but i'm thinking now that it's not randomly shutting off, but it's because the battery is actually dead even though it's reading say, 52%. And then sometimes when the phone shuts down and I'm charging it, when i hit the power button to see the charge level, I instead get a battery icon with a ? in the center of it!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what it shows now, which looks correct.
Ok, a bit more info now that i've been trying to watch for any patterns on this issue. So, if the phone is off and i put it on a charger, any charger that it recognizes and does so with an led light coming on, hitting the power button to check the charge level displays this fun little icon:
Annoyances aside, I find this (never seen it before) quite comical, just in the fact of me visualizing a conversation between me and my phone, and the phone gets an attitude and throws up a question mark symbol in response to any question i have for it lol...
But yeah, so not all chargers will charge the thing, even tho it acts like it's charging. Turning it on while on one of these chargers will make the phone shut back off during boot, no matter how long u leave it plugged in to charge. There's only a few chargers i have that will actually charge it.
Another thing I noticed is I have Battery Saver set to pop on at 30%, but i dont see any indication that it is on, and the buutton that says "TURN ON NOW" can never be clicked, no matter what.
GWARslave119 said:
I've had the same/similiar problem it seems since I've had the phone almost. I got the phone in July of 2018, and within a week of getting it a dropped it in the toilet (feel free to laugh). Let it dry, and it's still worked ever since. I just don't know if that could cause issues down the road or not. I figured when it comes to water, it's either screwed, or not, but I don't know enuff about how that works. Anyways, I used the phone for a little less than a year and got another phone, and rarely used it since. Started using it again recently, and there's the usual problem with some cords or chargers not working for it. And then there's the phone either reading the battery information wrong, or it's getting fed the wrong information, regarding battery level as well as charge time left. Like, it's said 2% charging, 2 min left till full ha. Almost the phone likes to randomly shut off, but i'm thinking now that it's not randomly shutting off, but it's because the battery is actually dead even though it's reading say, 52%. And then sometimes when the phone shuts down and I'm charging it, when i hit the power button to see the charge level, I instead get a battery icon with a ? in the center of it!
Click to expand...
Click to collapse
Lol that's weird. I've got my X722 since Feb 2018 and used it for all these years every single day (no signs of replacing it until it dies...probably), and in contrast I've taken quite some care with it: Never ever using the original charger and cable (just throw them away as these were the cause of many burnt ports back then) and using QC3 only when I actually need it (mainly because the phone gets pretty warm when charging this way, especially during summer, Lithium cells don't like extreme heat too much). It doesn't even have any noticeable scratches (a couple super small ones that are pretty hard to even notice).
I've gone through every single Android revision and currently in 10 (AICP) and experienced some of those issues a couple of times:
- The phone would, quite literally, randomly shutdown without any warnings (nothing to do with the battery, as it would turn on like normal after a hard reset). Maybe like 10 times since I've got it. Sometimes I just noticed it's actually turned off or it dies in my hands while doing anything. I've got no clue why this might happen, but it's so rare (like once every couple of months) that it doesn't bother me.
- The phone would not charge AT ALL when using some particular chargers (nothing to do with the cables as I've tested).
So far: Huawei and Samsung original chargers would only turn on the charging LED indicator for it to turn off like 2 seconds later (no charging whatsoever); and crap quality bootleg chargers (like those fake Samsung ones from Aliexpress) or those ****ty $1 chargers that you can buy everywhere would trigger charging but at unreasonably low speed (like 15mA charging current, basically not charging at all).
My Tronsmart 2 port charger (one with and one without QC3) coupled with the same 2 cables I've bought with it still works like a charm (been using it ever since I've got this phone). Only the port on the cable I use for normal (non QC3) charging is slightly loose (because that's the one I use the most) and the phone still holds quite a charge even though I charge it almost everyday (too much Youtube...).
Apart from this one, all the Xiaomi chargers I've tried also works fine (although none of the QC capable ones actually charge with QC3, I've only get this to work with my Tronsmart one). And the Nokia charger from my sister's phone also works fine.

Categories

Resources