Q&A for [ROOT][CWM]GiONEE E7 Chinese CWM Recovery /w translations
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT][CWM]GiONEE E7 Chinese CWM Recovery /w translations. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
English!
Thanks for that cwm! but, is there any English CWM available for GiONEE Elife E7???
I used the attached file of this article but I take also a black screen... I flashed it with recovery tools..
Please help..
çProblem with recovery
Hi im from spain and i have just instaled this recovery but when i try to reboot my smarthphone and use the recovery this swich off and i had too reboot again could somebody help me pleasee??
nice bro its good job
recovery doesn´t work
I have a blu life pure xl, and i flashed the e7 stock rom, but i had some problems, like the phone always takes about 1 hour for reboot and power on, when i want to shut down it, it takes forever even it has 1% of battery. All of this problems made me want to flash a custom rom for fix this problems. i flashed cwm, but when i want to reboot into recovery, the phone simply shut down. i tried with button combination and fastboot methods, but is always the same. what can i do for fix this problem?
Related
Q&A for [RECOVERY][A3000-H] TeamWin Recovery Project [v2.7.1.0]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][A3000-H] TeamWin Recovery Project [v2.7.1.0]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi Olivier first of all I want to thank you for uploading this recovery.
But there is a slight problem whenever I tried to use it.
Apparently the size of this recovery is slightly bigger than lenovo A3000 partition size. So everytime I used it, I lose my baseband and IMEI number (both changed to unknown).
Maybe if you can make it to 6mb size or less it will work perfectly
When I lose my baseband there is no option to recover it except for fresh flashing the rom.
Maybe the recovery partition overlapped other region. I don't know for sure.
I tried using 140127, 140526 and 140926 version all result the same.
And also I have problem using this to install zip. I tried to install walkman and it failed. I forgot what the log said. Sorry.
* Note for other for download link. It's available on the top section. Just look for download tab of this thread. It's there.
flash this ROM first
h**p://click.xda-developers.com/api/click?format=go&jsonp=vglnk_14246254570608&key=f0a7f91912ae2b52e0700f73990eb321&libId=05c9c7d9-dbe2-4cb5-905d-cbb53e91b055&loc=http%3A%2F%2Fforum.xda-developers.com%2Flenovo-a3000%2Forig-development%2From-cyanogenmod-11-0-t2954370%2Fpage7&v=1&out=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F0B5yhZ9sXUH_GMWhCQllhbkZRbUk%2Fedit%3Fpli%3D1&title=%5BROM%5D%5B4.4.4%5D%20CyanogenMod%2011.0%20for%20A3000-H%20%5BN%E2%80%A6%20-%20Pg.%207%20%7C%20Lenovo%20A3000%20%7C%20XDA%20Forums&txt=A3000_A421_kupyxa4444_%26amp%3B_luckasfb_1.3.rar
Got a 404 hitting the link for the bui;d . . .
Any new active link?
Thank you.
Q&A for [ROM][I9500][AOKP][4.4.4] OFFICIAL/UNOFFICIAL BUILDS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][I9500][AOKP][4.4.4] OFFICIAL/UNOFFICIAL BUILDS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
black screen while calling
Hi, guys! Thx for awesome ROM.
But periodically I face one very annouing bug - when I start the call, talk for some seconds and than look to the phone, the screen remains being black! So, I can't hang up, disable mic or dial additional code .
It seems, like the proximity sensor just stops working or the phone just starts to sleep (like it is blocked by the power button).
This happends periodically, but the probability of this is more than 50%.
Tell me please, what should I do to help you resolve this bug?
Cant install the ROM
Can anyone help me with an odd issue?
From the latest stock, i flashed CWM recovery via ODIN, factory resetted, formated /system, installed the latest AOKP build, and rebooted. the 1st boot is to a black screen and only lasts a few seconds, then it auto-reboots straight into recovery (CWM).
I've tried TWRP, but it's the same, it also ends up rebooting into TWRP.
hi,
I am unable to download AOKP Basket build please give alternate link to download official download
Q&A for [RECOVERY] ClockworkMod Recovery [v6.0.4.6]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] ClockworkMod Recovery [v6.0.4.6]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Downgrade from v6.0.4.6 to v5.5.0.4?
I have the lastest CM11 build installed but due to constant reboots I'm trying to downgrade to something that's a bit more stable.
I wanted to try Aurora but it asks for CWM 5.5.0.4. So I replaced recovery.img through the pink screen method.
But now when I boot up CWM 5.5.0.4 it doesn't mount the SD card.
Did I miss something? Do I have to install CWM 5 in a different way?
Deleted my huawei u8800 pro recovery.img
Can someone pls upload the recovery image..The official one...i forgot to back it up...Thank u.
Q&A for UPSM and Emergency mode N9005 Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for UPSM and Emergency mode N9005 Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
feedback
I flashed UPSM onto my SM-N 9005 running android 5.0 lollipop but at the first start it caused a reboot. After that i was able to start the app but during phone calls there was no voice.. Than i tried to close the app and return to normal functioning but after several reboots was i unable to do it. Itried to flash the other file posted and get working the app or just delete it but after flashing the other file none of them was succesful. So i had go do a hard reset butafter that were several FCs so i decided to flash the whole 5.0 rom again.. after that everithing is back to normal. Hoped UPSM would work well from the start but maybe later..
I have been searching for this fix from quite some time for N9005
Sincere thanks to Dr. Ketan and members for providing the fix. Actually, I have been searching for this fix on internet from quite sometime and was disappointed till I reached here on this thread.
Thank you.
Sorry for my English is too bad.
[quote name="amk19" post=58976986]Thanks.
One more thing, All the widgets will be gone from TW Launcher once returned back to normal mode from UPSM. Including weather widget, SNote widget.
Any fix for this?[/QUOTE]
+1
Admin Note: this thread has a dedicated questions and answers section which you can access here -->.
bootloap
everytime i try to flash UPSM the phone gets into bootloader so i have to flash restore zip to open the phone again any solution please
SM-N9005 Using Omega rom
Q&A for [TWRP-2.8.6.X][ unofficial ][ sm-n9100]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TWRP-2.8.6.X][ unofficial ][ sm-n9100]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
gcappa said:
Sorry none of the recoveries will boot up. All of them get stuck at the boot to recovery screen.
Even the stock recovery didnt work. ON another forum I posted the stock recov ery image as well as the modified cwm that would boot but wouldn't flash anything.
I'm using the 5.01 hong kong update from Sammobile for the sm-n9100.
Heres a link to the stock recovery from the firmware.
And this is the modified CWM that boots up but doesn't flash anything.
Click to expand...
Click to collapse
Hi Could you confirm that you have used Philz touch 6 CWM Advanced Edition, on you Note 4 HK version( N9100ZHU1BOC4 ) ,running on lollipop 5.0.1 ?
I just want to root it. Maybe later I'll flash another ROM in it.
Thanks
Yes I've installed a modified version of Phil's CWM with both kitkat and lollipop. Although it boots up fine on both Roms. I havnt been able to flash anything with it, without getting an error...
SO neither twrp and cwm are working correctly as far as I know right now. I havnt been able to find a custom recovery that works 100% yet. I think CWM can be fixed if someone cares to take a look at it.