Database Users

[XT1033][Restore from GPE 4.4.4 to stock Moto 4.4.2]

Disclaimer
What's posted here is tested before sharing
but if something bad happens, it's not my problem.​Originally posted @MotoModTR by »CanERYVZ« to restore the stock firmware of any XT1033 converted to XT1032 GPE 4.4.2 with deej_roamer's instructions posted here,then OTA'd to GPE 4.4.4. I'm just sharing, all credits to »CanERYVZ« :good:
Your device will be restored to XT1033 Asia.retail 4.4.2 successfully
TESTED and WORKS for XT1033 Asia Retail Dual-Sim version.
1- Download 4.4.2 stock version for your device RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
1a- Extract firmware to c:\retail
2- Download stock OTA 4.4.4 file for XT1033 Blur_Version.171.44.31.falcon_umtsds.AsiaRetail.en.03.zip
2a- Extract just the 3 files "gpt.bin", "logo.bin" and "emmc_appsboot.mbn" to c:\retail and overwrite the old ones.
3- Download mfastboot-adb.rar
3a- Extract mfastboot-adb.rar to c:\retail
4- Open CMD (command prompt) and go to C:\retail (type cd c:\retail in cmd)
Note: you need to run command prompt as administrator.
4a- Type the following commands one by one:
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
5- Go to stock recovery. Wipe data / factory reset and wipe cache for a clean start.
ps : motoboot partition will result error because we don't have it in the moto 4.4.4 ota file, just don't worry and continue. :good:
Greetings. :highfive::good:​

So, this will restore the mobile from GPE to Stock 4.4.4 with dual sim capability ?

When does the android s friends

No,
This will restore XT1033 from GPE 4.4.4 to Moto 4.4.2 , but if you like you can OTA to Moto 4.4.4.

When does the android l friends

Awesome, but i have a question.
Some people just take the gpt.bin, replace it to 4.4.2 firmware pakage and flash without flashing motoboot.img.then ok.
Some people take logo.bin too.
But i did not see anyone take the emmc_appsboot.mbn. can u explain what is emmc_appsboot.mbn
Sorry for being noob.
Btw, how many devices did u test?
Sent from my SM-G900F using Tapatalk

@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
aboot loads the kernel and ramdisk into memory at the addresses requested by the boot image header, and then signature validation is performed after this loading is complete. Because the boot image header is read straight from eMMC flash prior to any signature validation, it contains essentially untrusted data. As a result, it's possible to flash a maliciously crafted boot image whose header values cause aboot to read the kernel or ramdisk into physical memory directly on top of aboot itself!
Click to expand...
Click to collapse
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.

fatihtpr said:
When does the android l friends
Click to expand...
Click to collapse
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...

Semseddin said:
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Click to expand...
Click to collapse
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?

fatihtpr said:
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
Click to expand...
Click to collapse
Xt1032 is one sim version.
Xt1033 is dual sim version
Gửi từ GT-N7105 của tôi bằng cách sử dụng Tapatalk

Thanks windylawyer

Thanks OP...

THANKS!!!
thank youuu good sir! this is total life saver!!

Preflash validation failed
I have got a 1032. Used to have GPE, installed as 4.4.2, OTA upgraded to 4.4.4.
I want to get back the Motorola ROM, 4.4.2, or 4.4.4.
When I tried, I got a few "Preflash validation failed" errors, bootloader complains: "version downgraded for xxx". After the "downgrade" I have got just bootloader and recovery. No sstem can be booted/installed.
I have also tried this script (first few steps), but I have got the same errors for the first 2 commands
Tried with 4.4.2 and 4.4.4 xml.zip versions as well.
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot

... and after the whole thing ran, boot process stops in logo (bootloader is open blahblahblah...)
bootloader / recovery can be started, nothing more.

is this method working successfully??

jbanti said:
is this method working successfully??
Click to expand...
Click to collapse
Yes

can i ota after following this procedure to restore to xt1033 firmware?

pfufle said:
can i ota after following this procedure to restore to xt1033 firmware?
Click to expand...
Click to collapse
YES... u can its fully Stock
Sent from my XT1033

Bootloader unlocked flashing and stuck
Semseddin said:
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
Click to expand...
Click to collapse
please somebody help.....after doing all this my screens blink with logo of BOOTLOADER UNLOCKED........and when i go to the fastbootboot and connect usb it now doesnt recognize it........plz help me save my moto g....plzzzzzzzzzzzzzzzz

[FIRMWARE] XT1068 5.0.2 Retail BRAZIL Firmware

Hey guys, i found out a zip file with the 5.0.2 firmware
Link --> http://www.filefactory.com/file/1j3tpg7jf8dl/RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
(Please, give me mirrors... filefactory it's sooo slow ç.ç)
Instructions:
1. Download 5.02 and Extract it to a folder
2. Download mfastboot-v2 and Extract it into the same folder Download: http://goo.gl/lTYq4F
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
That's all folks! See ya later!

W3ND31 said:
Hey guys, i found out a zip file with the 5.0.2 firmware
Link --> http://www.filefactory.com/file/1j3tpg7jf8dl/RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
(Please, give me mirrors... filefactory it's sooo slow ç.ç)
Click to expand...
Click to collapse
Already made a Easy installer for RETAIL BRAZIL firmware see my signatue (5.0.2) or see Thread here
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612

reefuge said:
Already made a Easy installer for RETAIL BRAZIL firmware see my signatue (5.0.2) or see Thread here
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
Click to expand...
Click to collapse
Sorry man! I had not seen the post , man! :/
How i exclude this?

W3ND31 said:
Sorry man! I had not seen the post , man! :/
How i exclude this?
Click to expand...
Click to collapse
No problem good to have link so people can get only the firmware file

| Read Before You Flash | Unlock | Restore | Stock Firmware |

Read Before You Flash ​
A cautionary advice. If you unlock your bootloader the warranty of all non eu devices are lost. Also to claim warranty of an unlocked EU device you'll need to live in the European Union. Also locking the bootloader won't give back the warranty.
If you came on xda to root and modify your phone, you'll probably need to follow these guides first
For instructions regarding installation of stock firmware head over here
To Restore back to stock head over here
Please keep the discussion regarding each topic separate in their individual threads itself. It'll make managing the threads a lot more easier. This thread is for posting stock firmware only
Happy Flashing

Stock Firmware Files for Moto E​
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads​
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml

Credits
@lohanbarth for lte firmware

thanks @Lucas Eugene
here are the fastboot code:
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
MOTOEFLASHALL.bat

lohanbarth said:
thanks @Lucas Eugene
here are the fastboot code:
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
MOTOEFLASHALL.bat
Click to expand...
Click to collapse
Thanks I forgot to correct it after seeing the firmware images. Thanks a lot for making the parts more clear

any stock firmware for the XT1527? Its the lte US varient i suppose.

Any firmware for XT1526? 4G US Boost Mobile LTE.

phliptrip said:
Any firmware for XT1526? 4G US Boost Mobile LTE.
Click to expand...
Click to collapse
Not sure this thread is being updated or not but no im afraid.

fix-this! said:
Not sure this thread is being updated or not but no im afraid.
Click to expand...
Click to collapse
Bro at least let the firmware images be released or leaked.

Lucas Eugene said:
Bro at least let the firmware images be released or leaked.
Click to expand...
Click to collapse
i know but i said currently there is no cdma nor US based stock firmware yet from moto. i think users should know that before they try to root or flash anything.

fix-this! said:
i know but i said currently there is no cdma nor US based stock firmware yet from moto. i think users should know that before they try to root or flash anything.
Click to expand...
Click to collapse
Ah! My fault but from what I heard Motorola never releases the firmwares they leak. Also the site as sfdev is down so I think it'll probably take longer

Lucas Eugene said:
Stock Firmware Files for Moto E​
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads​
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml
Click to expand...
Click to collapse
@Lucas Eugene
my device is moto e 2015 3g
I unlocked bootloader to root it, after that i read carefully that it meant for LTE version, i then locked the bootloader again without doing anything at same time,
Then when i reboot it gives me "invalid system image" error, and refuses to boot. Then again i unlocked bootloader, it went well, its working
I want to make my device as it was when i purchased it.
Any stock firmware available for my device.
Please suggest some workaround to overcome the above problem.

santoshvaza said:
@Lucas Eugene
my device is moto e 2015 3g
I unlocked bootloader to root it, after that i read carefully that it meant for LTE version, i then locked the bootloader again without doing anything at same time,
Then when i reboot it gives me "invalid system image" error, and refuses to boot. Then again i unlocked bootloader, it went well, its working
I want to make my device as it was when i purchased it.
Any stock firmware available for my device.
Please suggest some workaround to overcome the above problem.
Click to expand...
Click to collapse
You can't reverse time and go back to the original Bootloader state ever. If you lock after unlocking it would just give you a code 1 instead of 3. Also if you live outside the EU your warranty is void as soon as you unlock.
There's no harm to unlock if you don't go further to install unstable operating systems.
Also the firmware for the non lte hasn't been leaked yet

@lohanbarth
can you arrange stock for moto e 2nd gen 3g version?

How about Unlock Bootloader !!

Lucas Eugene said:
Stock Firmware Files for Moto E​
Hi guys, this thread is for official stock firmwares for the device Moto E (2015)
Downloads​
XT1524 (4G-LTE)
XT1524_RETEUALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml
Click to expand...
Click to collapse
Nice!
Now if we could get the stock US version (XT1527_RETUSALL_MOTOE2 (4G-LTE) _5.0.2_LXI22.50-13_cid7_subsidy-DEFAULT_CFC.xml)

will this XT1524 version work for a US 4G-LTE variant XT1527? Would it be possible to flash to this, then unlock the bootloader/root/etc?

Moto E xt1514
Moto E2 xt1514 please

I can help
juniklx said:
Moto E2 xt1514 please
Click to expand...
Click to collapse
I have a New device, non-rooted and original bootloader.
I can help, but, don't knew how.
How make a backup, of all??

Moto E xt1514
juliovieira said:
I have a New device, non-rooted and original bootloader.
I can help, but, don't knew how.
How make a backup, of all??
Click to expand...
Click to collapse
yes please

Stock 6.0/Marshmallow firmware for Latin America (RETLA) XT1072 (fast download)

https://drive.google.com/file/d/0B9JdPPX_cXeAODFEeVlGMkpsREU/view?usp=docslist_api (685mb)

how i can install this?

hitsegam said:
how i can install this?
Click to expand...
Click to collapse
Mfastboot or "apply update from sdcard" there's many guides on the forums

mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
I made a zip whit minimal fastboot + mfastboot v2 and a bat file, extract the rom files in the same folder as fastboot and bat file, run the bat as admin
Fastboot+mfastbootv2
BAT File

dr.nic said:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
I made a zip whit minimal fastboot + mfastboot v2 and a bat file, extract the rom files in the same folder as fastboot and bat file, run the bat as admin
Fastboot+mfastbootv2
BAT File
Click to expand...
Click to collapse
Great stuff. Thankyou

my phone still stuck in the motorola animation 10 min and more
T.T

hitsegam said:
my phone still stuck in the motorola animation 10 min and more
T.T
Click to expand...
Click to collapse
Same here

LuuchoRocha said:
Same here
Click to expand...
Click to collapse
First boot takes a long time. 25mins for most people

Unified firmware thread request
I appreciate a lot your efforts. This will help a load of people who bricked their devices, want to factory reset or just reflash or update to 6.X. However, you should take down all your pages and instead upload all the firmwares in an unified thread, so you won't need to search separately.

benjausen said:
I appreciate a lot your efforts. This will help a load of people who bricked their devices, want to factory reset or just reflash or update to 6.X. However, you should take down all your pages and instead upload all the firmwares in an unified thread, so you won't need to search separately.
Click to expand...
Click to collapse
I did them separately so they would be easier to find, rather than clicking a thread and searching through pages
Sent from my thea using XDA Labs

Hemphiz said:
I did them separately so they would be easier to find, rather than clicking a thread and searching through pages
Sent from my thea using XDA Labs
Click to expand...
Click to collapse
You can actually put a list of all firmwares and an explanation in the first post. So please do that.

benjausen said:
You can actually put a list of all firmwares and an explanation in the first post. So please do that.
Click to expand...
Click to collapse
No. I wont be doing that.

Can I install it with TWRP? or is there a way to convert this to a flasheable zip?

SirGustav said:
Can I install it with TWRP? or is there a way to convert this to a flasheable zip?
Click to expand...
Click to collapse
Not unless someone on the forums has. I'm not sure. If not. It's relatively quite easy to flash. Not as hard as it seems

SirGustav said:
Can I install it with TWRP? or is there a way to convert this to a flasheable zip?
Click to expand...
Click to collapse
Hi dude! Of course there is a way to make a flashable zip from this.
Here is :angel:

LuuchoRocha said:
Hi dude! Of course there is a way to make a flashable zip from this.
Here is :angel:
Click to expand...
Click to collapse
Is that not for things like flashing custom recoveries? I assumed you had to use kitchen tools to make a stock rom flashable zip... Though times do change

Hemphiz said:
Is that not for things like flashing custom recoveries? I assumed you had to use kitchen tools to make a stock rom flashable zip... Though times do change
Click to expand...
Click to collapse
Well the easiest way is with a kitchen but you can do it without one.
I think in edify we have some functions to flash images

New update (MPJ24.139-63) released on September 9, 2016 for moto G4 plus.

I have found that the new update is not a newer Android version but a security patch according to identifications made in July 2016.
Total size of update is 508.4 MB.
Some people have reported problems with notification sounds.
Do we have any more news about this update.?

Please upload stock rom for indian variant moto g4plus xt1643
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory

I have installed the update and everything is working fine for me.

help
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
can u backup ur rom nd upload

navi74644 said:
can u backup ur rom nd upload
Click to expand...
Click to collapse
My phone is not rooted. So I guess I can not take ROM backup.

no need to be rooted
jack_04 said:
My phone is not rooted. So I guess I can not take ROM backup.
Click to expand...
Click to collapse
just put it in fastboot mode and pull the rom

navi74644 said:
just put it in fastboot mode and pull the rom
Click to expand...
Click to collapse
Can You Tell Me How To pull the rom In fastboot mode?

I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..

How is your phone working now?
jack_04 said:
I have installed the update and everything is working fine for me.
Click to expand...
Click to collapse
Motorola claims that they have solved all the reported issues except heating because of its board.
Many people have found that notification volume is decreased to 30%.
Could you share detailed information about what is included in update?

Have you reported this with Motorola?
Milan Samani said:
I hv installed updates..
There is a problem after that..
Sim 1 is automatically Off after sm time..
Click to expand...
Click to collapse
If you are using unrooted phone the I would suggest you to report this with Motorola. Let us know how do they respond and if they are willing to offer any quick solution to this issue.

first thing first: I have rooted using systemless root method. so if I update to this latest patch will I have to root it again? and will it be a complete factory reset or I can expect my apps persisting after update?
Sent from my Moto G (4) using Tapatalk

is there any way to update my unlocked bootloader phone ? I tried everything.. Flashed stock recovery... Unroot my phone.. Flash fire etc. nothing works.. Any suggestion will be appriciate.

navi74644 said:
i have installed a stock rom and it was US but now my phone is unable to connect to any wifi or mobile network plz upload anywhere else than filefactory
Click to expand...
Click to collapse
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )

I got this update and after updating, I am facing low notification sound.
Sent from my Moto G (4) using Tapatalk

By my ear notification sound is about 60% what it was before (this is sitting two devices next to each other and comparing the updated device at max volume with the non-updated device, when the nud's volume bar was at ~60℅ they sounded equal). Incidentally 100℅ on the non-updated device was probably a bit too loud.
I've contacted Moto and requested they acknowledge the issue and provide a timeframe for a solution; I have threatened to return both devices to my supplier. I'll share the reply.

The US unlocked XT1644 didnt get any updates. Anybody expecting android 7.0 before the holidays is going to be disappointed.

Pranav Kumar said:
Same thing happened to me ! What I did is I just gave my mobile to service centre they flashed original firmware( don't forget to remove warning image )
Click to expand...
Click to collapse
how to remove warning nd here did get it flashed again i mean which service centre

navi74644 said:
how to remove warning nd here did get it flashed again i mean which service centre
Click to expand...
Click to collapse
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot

anhoxhrs said:
relock the bootloader and flash the stock rom again.
steps:
Flashing Stock Firmware:
1) Download firmware for XT1643 from https://drive.google.com/file/d/0B1N...tsRU1RTVk/view
2) Download mfastboot from https://drive.google.com/file/d/0B5j...ew?usp=sharing
3) Extract the firmware into the folder containing mfastboot.
4) Reboot the phone into Bootloader (power off, then press the power and volume down buttons simultaneously).
5) Execute these commands and make sure you receive an 'OKAY' after each command.
Code: just type first mfastboot oem lock,then enter this commands
mfastboot oem lock
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem lock
mfastboot reboot
Click to expand...
Click to collapse
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u

navi74644 said:
brother the given link doest not exist plz update ur drive download link it will be highly thankful to u
Click to expand...
Click to collapse
Lol this guy who mentioned the stepd just did a copy paste.the url he provided is incomplete.the complete url is - https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view