so i rooted my device i got root access but didnt got cwm recovery
i ws ok with it but after some months i wanted recovery so i triede twrp recovery app but that didnt helpd me
and after that i was stuck in bootlooop cannot go to recovery mod also just can open downloading mod only....
and i also get " SW rev check fail " when i tried to install another stock firmwr via odin
pleas help me soon
current binart custom
knox warranty woid 1
rp swrev a3
sw rev check fail
Related
Hey fellas,
This is my 1st time trying to root a phone, please forgive my total ignorance
I am having an impossible time rooting my galaxy note 3
SM-N9006 (Chinese)
Android ver: 4.4.2
baseband: N9006ZCUEND1
I tried several methods, mainly ODIN with " n9006-cwm-recovery-6.0.3.7(0922)-fix-adb"
the problem is that every time I have to reboot the phone in recovery mode, I get:
RECOVERY BOOTING (in blue),
RECOVERY IS NOT SEANDROID ENFORCING (red)
Set Warranty Bit: recovery (yellow)
and it bootloops till that. ( root de la vega, kingo, ODIN, etc... same problem, grrrr!)
I am guessing that's because I am using the wrong firmware to flash my phone
I just want to install Google play store ( Chinese note 3 blocked it, some bull****!!!!) and customize my phone
any suggestion?
luv u guys, keep up the good work
EDIT : It's works ! Just use the SM-N9505 CF-Root :
http://download.chainfire.eu/352/CF-Root1/CF-Auto-Root-hlte-hltexx-smn9005.zip
I have the same problem. Impossible to root my Galaxy Note 3 (SM-N9006). If I try to root my phone with Odin, I have bootloops.
In the download mode I have :
ODIN MODE
PRODUCT NAME: SM-N9006
CURRENT BINARY: Custom
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTION: Enable
WDC START
Nobody can help us? Thanks.
Did you?
Did you finally fix your problem? I got the same problem now, dunno what to do next
goukison said:
Hey fellas,
This is my 1st time trying to root a phone, please forgive my total ignorance
I am having an impossible time rooting my galaxy note 3
SM-N9006 (Chinese)
Android ver: 4.4.2
baseband: N9006ZCUEND1
I tried several methods, mainly ODIN with " n9006-cwm-recovery-6.0.3.7(0922)-fix-adb"
the problem is that every time I have to reboot the phone in recovery mode, I get:
RECOVERY BOOTING (in blue),
RECOVERY IS NOT SEANDROID ENFORCING (red)
Set Warranty Bit: recovery (yellow)
and it bootloops till that. ( root de la vega, kingo, ODIN, etc... same problem, grrrr!)
I am guessing that's because I am using the wrong firmware to flash my phone
I just want to install Google play store ( Chinese note 3 blocked it, some bull****!!!!) and customize my phone
any suggestion?
luv u guys, keep up the good work
Click to expand...
Click to collapse
sikching said:
Did you finally fix your problem? I got the same problem now, dunno what to do next
Click to expand...
Click to collapse
I have a SM-N9006 and I got the same problem.
Try the CF-Auto-Root for SM-N9005 (http://download.chainfire.eu/352/CF-Root1/CF-Auto-Root-hlte-hltexx-smn9005.zip), it works for me.
still cannot
but the phone keep entering the boot loop, I cannot enter the root mode or any other mode
it enter into boot loop one the battery is put
did u got same problem?
Thanks
mick39 said:
I have a SM-N9006 and I got the same problem.
Try the CF-Auto-Root for SM-N9005, it works for me.
Click to expand...
Click to collapse
mick39 said:
I have a SM-N9006 and I got the same problem.
Try the CF-Auto-Root for SM-N9005 (http://download.chainfire.eu/352/CF-Root1/CF-Auto-Root-hlte-hltexx-smn9005.zip), it works for me.
Click to expand...
Click to collapse
It's work for me too.
goukison said:
Hey fellas,
This is my 1st time trying to root a phone, please forgive my total ignorance
I am having an impossible time rooting my galaxy note 3
SM-N9006 (Chinese)
Android ver: 4.4.2
baseband: N9006ZCUEND1
I tried several methods, mainly ODIN with " n9006-cwm-recovery-6.0.3.7(0922)-fix-adb"
the problem is that every time I have to reboot the phone in recovery mode, I get:
RECOVERY BOOTING (in blue),
RECOVERY IS NOT SEANDROID ENFORCING (red)
Set Warranty Bit: recovery (yellow)
and it bootloops till that. ( root de la vega, kingo, ODIN, etc... same problem, grrrr!)
I am guessing that's because I am using the wrong firmware to flash my phone
I just want to install Google play store ( Chinese note 3 blocked it, some bull****!!!!) and customize my phone
any suggestion?
luv u guys, keep up the good work
Click to expand...
Click to collapse
I had the same problem with 9005
Used CF Auto root via Odin
and had the problem you described
Pulled and replaced battery
Rebooted to download( Power,Volume Down and Home then volume up)
Flashed custom recovery via odin
Rebooted phone
Now rooted with custom recovery and all worked fine.
Copied custom ROM to SD card
Rebooted to custom recovery
Flashed Custom ROM and all working fine.
Hi there guys,
I have a Note 3 N9005, and I am from Romania. My phone had the ORO Firmware (I think)but it was not SIM locked, or something like that, and it had Lollipop, the latest OTA version.
I've tried to install TWRP with Odin, on Windows (I have an MacBook, but I have installed Windows 7 x64 on VMware Fusion 8PRO).. but it gave me an error in.. and since then, when I restart the phone, it will say this : "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I've tried several versions of Odin, like : 3.09 ; 3.07 and 1.85 but I have the same error.
I've also tried to install the latest firmware (N9005XXUGBOB6_N9005OXXGBOB4_ROM) , but I receive the same error, which can be seen in the printscreen.
This is what it says on the Download Mode :
ODIN MODE
Product name: SM-N9005
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: OFF
Knox Warranty Void: 0x0
Qualcomm SecureBoot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P3
Secure Download: Enable
UDC Start
---------------------------------------------------------
What can I do?
Thanks in advance!
I would try from a real Windows OS .
JJEgan said:
I would try from a real Windows OS .
Click to expand...
Click to collapse
Thanks for ur reply.. but the problem is that I ain't got a real windows computer..
Later Edit : I remembered I've had an old hard disk with Windows 7 which I used it for playing GTA5 a year ago.. (I have a Hackintosh).. and I've plugged it in.. and here it worked Odin.. to flash TWRP.. but now if I restart the phone.. it will get stuck where it says "Samsung N9005" ..but I can enter TWRP recovery menu..
zuzuzuzu said:
Thanks for ur reply.. but the problem is that I ain't got a real windows computer..
Later Edit : I remembered I've had an old hard disk with Windows 7 which I used it for playing GTA5 a year ago.. (I have a Hackintosh).. and I've plugged it in.. and here it worked Odin.. to flash TWRP.. but now if I restart the phone.. it will get stuck where it says "Samsung N9005" ..but I can enter TWRP recovery menu..
Click to expand...
Click to collapse
Of course. Earlier you flashed the phone but it doesn't completed. Reflash stock firmware. Or flash custom rom with twrp.
Sent from my SM-N920C
Have been using a S5 for several years which I unlocked bootloader and rooted at the beginning. Been running a NI2 firmware with no problems. Decided I wanted to try a Lineage rom and when I tried to flash it, it failed. I wanted to update to later android so I flash a Stock firmware through ODIN and it work fine for several days. For reasons unknown to me I went into recovery again and did a factory reset. Now when I turned on phone this is all I get and it will no longer let me boot into recovery mode. No matter what key combination I push, I just get the following screen:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Software Update Failed
etc etc etc
Tried flashing different firmware in ODIN (3.09 and 3.10) and still boot into same
screen with following line added:
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
Have tried Samsung Switch, Kies and Verizon Software Update to no avail. Have uninstalled drivers and reinstalled several times. Also ADB does not recognize phone.
At wits end - any suggestions appreciated!
kd3yt said:
Have been using a S5 for several years which I unlocked bootloader and rooted at the beginning. Been running a NI2 firmware with no problems. Decided I wanted to try a Lineage rom and when I tried to flash it, it failed. I wanted to update to later android so I flash a Stock firmware through ODIN and it work fine for several days. For reasons unknown to me I went into recovery again and did a factory reset. Now when I turned on phone this is all I get and it will no longer let me boot into recovery mode. No matter what key combination I push, I just get the following screen:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Software Update Failed
etc etc etc
Tried flashing different firmware in ODIN (3.09 and 3.10) and still boot into same
screen with following line added:
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
Have tried Samsung Switch, Kies and Verizon Software Update to no avail. Have uninstalled drivers and reinstalled several times. Also ADB does not recognize phone.
At wits end - any suggestions appreciated!
Click to expand...
Click to collapse
You need to install using odin the last update avaliable for G900V. The last update is QF2. Download from updato and flash it..
Tried flashing QF2 and Odin failed again. I did manage to pick up a new in the box S5 and it arrived today. Works great and it is on 6.0.1 DPF4.
Just wanted everyone to know that the phone is now working!! Had not done anything to the phone since last post. Yesterday took it downstairs to an old computer running XP. When I turned the phone one got a surprise, it booted to the Verizon splash screen and stuck there. Installed ODIN on the computer, was able to put phone in download mode and then ODIN worked and was able to flash the DQH2 rom and phone works great. I now have a back up phone!
kd3yt said:
Just wanted everyone to know that the phone is now working!! Had not done anything to the phone since last post. Yesterday took it downstairs to an old computer running XP. When I turned the phone one got a surprise, it booted to the Verizon splash screen and stuck there. Installed ODIN on the computer, was able to put phone in download mode and then ODIN worked and was able to flash the DQH2 rom and phone works great. I now have a back up phone!
Click to expand...
Click to collapse
glad to hear it all worked out! I was in a very similar situation for the past week (S3 to the rescue), but using the latest Odin and the latest update for my VZW S5, I'm back on the S5. Now to search for regaining root....
RA
before begin, im sorry for my bad english. now i had a big problem so far and make me crazy some times.
i have note 3 (ha3g) with TWRP 3.1.1-0 installed but not rooted yet. i have been istalled any Custom rom but stuck on boot, all of it! i trying SD version still same problems. if you have an idea please help me..
If you are on KitKat
First flash lollipop bootloader
I have root my note 3 ( hltexx , Qualcomm adreno 330) with Odin but I have problem to install TWRP, I try couple time and when I go to recovery I get message:
Fail to normal boot to recovery
Odin mode error
Downloading mode..
Now , I have a question: I try to install recovery with Odin and have no luck , try with Oficial TWRP app from Play store and it's the same problem..
Can I use Rom Manager from Play Store to download and install Rom without TWRP?
And why I can't install and have problem with Recovery?
@jjoeshua, what is the model # of the phone in download mode?
This is what I get when I try to go to Recovery:
Could not do normal boot
ODIN MODE
product name: sm-n9005
Current binary:custom
System status:custom
Reactivation lockff
Knox warranty void: 0x1 (4)
Qualcomm secureboot:enable (csb)
RPswrev:s2 , t2 , r2 , a3, p3
Secure download: enable
Udc start
Downloading. ....
Do not turn off target!!
This is my model number and firmware :
What Twrp to download?
Hltexx
Hlte
Ht3g
Twrp for now 3: https://twrp.me/samsung/samsunggalaxynote3qualcomm.html
i'm install custom rom alexega_project_N950FXXU3BRA2 but can not power on show custom binary blocked. i'm download stock rom from sammobile but can not fash. show system rev. check fail device 1 binary 0. but can fash recovery official. but in recovery dm-verity error help me plzzzzz
It means it thinks you are downgrading, flash a newer stock rom