This is latest KK flashable zip via CWM which can be flashed over Stock Wiko Kitkat only. Also, it's deodexed.
INSTRUCTION TO FLASH ROM-
1. You must have any recovery installed.
2 .If you have already flashed any recovery then only proceed
3 .Place ROM in your sdcard
4. Wipe data/factory reset
5. Wipe dalvik cache
6.Flash ROM from sdcard
7.Reboot and enjoy
DOWNLOAD : Wiko Flashable
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x (STOCK)
Version Information
Status: FINAL
Current Beta Version: 8
Final Release Date: 2015-01-25
Created 2015-01-25
Last Updated 2015-01-25
Please,
Can you put an screenshot of version info (about phone)?
Thank you for deoxeding the ROM!
manos78 said:
Please,
Can you put an screenshot of version info (about phone)?
Thank you for deoxeding the ROM!
Click to expand...
Click to collapse
Its the same, just deodexed version.
P.S. I am using wr-kernel by @moonrotation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mr-illusionist said:
Its the same, just deodexed version.
P.S. I am using wr-kernel by @moonrotation
Click to expand...
Click to collapse
:good: Me too using the same kernel (v2.1 at time).
You know differences between Wiko v7 and this v8?
I'm not sure about advantages of upgrade to this version (at time using Stock v7 rooted+Xposed).
manos78 said:
:good: Me too using the same kernel (v2.1 at time).
You know differences between Wiko v7 and this v8?
I'm not sure about advantages of upgrade to this version (at time using Stock v7 rooted+Xposed).
Click to expand...
Click to collapse
I never used V7, so can't actually tell you the difference.
However i think you should upgrade, their must be some significant improvements in it.
manos78 said:
:good: Me too using the same kernel (v2.1 at time).
You know differences between Wiko v7 and this v8?
I'm not sure about advantages of upgrade to this version (at time using Stock v7 rooted+Xposed).
Click to expand...
Click to collapse
You can examine update.zip
This update is big!!
Bugfix Languages.
Can silence autofocus camera sound.
New kernel and recovery
And I can not tell you more. Just what I've searched the internet.
I have no idea how decrypt patches .c inside update.zip.
It would be nice if someone starts ROM based wiko last updated.
Im looking all the time wikogeek.com Need new source to merge changes from new update to WR-Kernel
moonrotation said:
This update is big!!
Bugfix Languages.
Can silence autofocus camera sound.
New kernel and recovery
And I can not tell you more. Just what I've searched the internet.
Click to expand...
Click to collapse
Hi,
After several time with MyPhone Agua Rio KitKat ROM I flashed Wiko v7 from here:
http://forum.xda-developers.com/android/general/rom-wiko-kitkat-rom-mmxa120-clones-t2981756
(You point this ROM at required for your kernel).
Now I have Wiko v7 + tweaks (Xposed, etc.), with custom kernel.
Then you recomend to flash this Wiko v8 deodexed?
manos78 said:
Hi,
After several time with MyPhone Agua Rio KitKat ROM I flashed Wiko v7 from here:
http://forum.xda-developers.com/android/general/rom-wiko-kitkat-rom-mmxa120-clones-t2981756
(You point this ROM at required for your kernel).
Now I have Wiko v7 + tweaks (Xposed, etc.), with custom kernel.
Then you recomend to flash this Wiko v8 deodexed?
Click to expand...
Click to collapse
I have no idea if my kernel works well with V8. No V8 deodexed as I know on the forum.
If you want to test, do a full backup first. And share results :good:
moonrotation said:
I have no idea if my kernel works well with V8. No V8 deodexed as I know on the forum.
If you want to test, do a full backup first. And share results :good:
Click to expand...
Click to collapse
Hi,
Only to clarify: Which ROM version are you using? Wiko Stock v7 or v8? Normal or Deodexed?
manos78 said:
Hi,
Only to clarify: Which ROM version are you using? Wiko Stock v7 or v8? Normal or Deodexed?
Click to expand...
Click to collapse
I tested wiko v8 update. Work perfect.
I have DarkL temp. Best wiko based rom is MERE (Battery life + performance)
moonrotation said:
I tested wiko v8 update. Work perfect.
I have DarkL temp. Best wiko based rom is MERE (Battery life + performance)
Click to expand...
Click to collapse
CleanKat 4 coming up for wiko base soon by @umangleekha. Also, i might release an unofficial update for MERE (wiko base), February edition soon. This time full MERE for wiko. Competition will be tough and it will be hard to decide.
Related
DarkCyanogenMod 4.4.4 for the Samsung Galaxy S Advance
What is DarkCyanogenMod?
DarkCyanogenMod is an aftermarket firmware based CyanogenMod project,has every features from CyanogenMod 11 plus:
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known Issues
- Camcorder close after record but movie saves good
Installation
Download ROM and GApps
Put the files on SDCard
Reboot in Recovery
Wipe Data/Factory Reset
Format /System
Select "Install Zip from External Storage"
Choose dCM zip file
Choose GApps zip file
Reboot System
Download
Go to post #2
Google Apps available here
Source
Device tree & kernel: TeamCanjica GitHub
Credits
TeamCanjica
DarkCM team
@AntaresOne
XDA:DevDB Information
DarkCyanogenMod, ROM for the Samsung Galaxy S Advance I9070
Contributors
Bx16
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.1.2
Based On: CM
Version Information
Status: Stable
Created 2014-10-05
Last Updated 2014-11-19
Should will working, if not just tell me
Link: http://d-h.st/IXk (build 1)
Link: http://d-h.st/AMd build 2, dCM 6.00
Link: http://d-h.st/LM5 build 3, dCM 7.00
Link: http://www.mediafire.com/download/k254yevga2fekqf/dcm_janice-19102014-bx16.zip build 4, hw keys fixed
Link: https://www.mediafire.com/?ounqky6zo1b3e8e v8.0
LAST FINAL BUILD v9.0:
https://www.androidfilehost.com/?fid=95784891001612033 PHILZ
https://www.androidfilehost.com/?fid=95784891001613228 CWM
Can you please make the background tiles full black? ( screnshot # 2) And also settings bar , and get rid of that glowing effect from volume slider? ( screenshot #5) In rest....... all we could really want from this beautiful rom is some stamped white icons Good Job This and Vanir rom deserves to be fully blacked out ( pre-themed)
@pictorul20 I can't edit rom and colors but you can try download black themes and apply it (rom support theme manager)
Good work,,
Downloading
Bx16 said:
@pictorul20 I can't edit rom and colors but you can try download black themes and apply it (rom support theme manager)
Click to expand...
Click to collapse
Ok thanks for the tip. and i like that there are people interested in the look of the phone interface . Much apreciated :highfive:
Another great ROM....thanks!
What toolchains are you using for this rom? Anyone tried this rom? How is the performance and battery backup?
@115dan:
GCC 4.8. Performance is like CM. You can overclock cpu and gpu if it's not satisfaction you.
Bx16 said:
@115dan:
GCC 4.8. Performance is like CM. You can overclock cpu and gpu if it's not satisfaction you.
Click to expand...
Click to collapse
Can you use Sabermod 4.8-4.9 for the next build? With that toolchain rom is a little more responsive.
@115dan: i will try build with 4.9 on this week.
Bx16 very very smooth, "customable" and stable ROM, congratulation! I love it!!! :laugh:
Thanks for the rom. One thing: it's possible to integrate "active notifications"?
@gianfrinico: i can't add/remove features. Darkcm Team can do it. I only compiled from sources to our device.
Sent from my GT-I9070 using XDA Free mobile app
Bx16 said:
@gianfrinico: i can't add/remove features. Darkcm Team can do it. I only compiled from sources to our device.
Sent from my GT-I9070 using XDA Free mobile app
Click to expand...
Click to collapse
Dark is a official ROM for Janice?
I find a little bug, MTP doesn't work
gianfrinico said:
Dark is a official ROM for Janice?
Click to expand...
Click to collapse
No, its unofficial build
johnny_cage said:
I find a little bug, MTP doesn't work
Click to expand...
Click to collapse
For me MTP work, maybe try off debugging on developers options
Hello... Is Apollo app also found in this ROM?
TPD-21 said:
Hello... Is Apollo app also found in this ROM?
Click to expand...
Click to collapse
Yes .... as you can see in the screenshots in op...
Sorry for my english...[emoji4] [emoji4]
tommi77 said:
Yes .... as you can see in the screenshots in op...
Sorry for my english...[emoji4] [emoji4]
Click to expand...
Click to collapse
Thanks for the answer. Btw I can not see the screenshot at all on the OP. Maybe the picture is formatted other than JPG or PNG I guess. (I just opened my laptop. Tonight I was able to see some of the sightings screenshot.) Therefore I have to ask it directly here. By the way thanks for the explanation.
First Custom Kernel for Micromax Canvas 2 Colors A120
WARNING:
Code:
I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Xprokernel V2 changelog
All features of V1
Entropy tweaks
Optimized slub
Hard Float optimizations
Undervolting
Optimize XZ compresion
Enhanced HW Composer
Dyanamic fsync by faux123
Click to expand...
Click to collapse
Features of Xprokernel V1
Compiled with latest Linaro Toolchain(4.9.2)
Added Governors
Added I/O scheduler
Default swappiness set to 60->15
Optimized mtk wifi driver
Increased check battery interval from 10 to 15s
Disabled Gentle Fair Sleepers for better UI performance
adjust dirty writeback for IO boost
Optimization for more free ram
Enabled aggressive multicore power savings
Disable crc for better performance
Governors added :
SMARTASS2
INTERACTIVEX
PEGASUSQ
ZZMOOVE
LULZACTIVEQ
SAKURACTIVE
NIGHTMARE
CONSERVATIVE
I/O scheduler
row
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use Trickster mod App to change governors
Intructions
Download the boot.img
Backup your data first
Flash the boot.img alone using Sp flash tool
DOWNLOADS :
Xpro KernelV2
Xpro KernelV1
XprokernelV2 With Int.d support
Kernel Source : https://github.com/SiddheshK15/tinno82_S5501
Credits
Sk.D and mr-illusionist For testinjg
Important Notes
This kernel is tested on wiko stock rom only
This kernel will work on roms having emulated partiton
If you want to include this in your custom rom take wiko stock rom was base rom and port the desired rom. Abviously with credits and link to the thread.
Good, I was also going to start kernel after exams, I'll tell u when i flash :good:
I cannot download the file it says content locked. How can we download this? Tia
Good work!!
Good work. I have started work but not have time. I just become a father.
https://github.com/Al3XKOoL/android_kernel_mediatek_rainbow
In my tests with my code, roms for a120 does not work well with partitions. May cause softbrick.
It would be great if someone started well with cyanogenmod port
moonrotation said:
Good work. I have started work but not have time. I just become a father.
https://github.com/Al3XKOoL/android_kernel_mediatek_rainbow
In my tests with my code, roms for a120 does not work well with partitions. May cause softbrick.
It would be great if someone started well with cyanogenmod port
Click to expand...
Click to collapse
Congratualtions mate.. :good:
And yes my kernel is also not working in a120 roms because a120 has non-emulated partiton and wiko rainbow/Explay Fresh has emulated partiton. Thats the only reason for soft brick. If you flash wiko stock rom and then your kernel with wiko ramdisk it will boot easily.
Siddhesh.K15 said:
Congratualtions mate.. :good:
And yes my kernel is also not working in a120 roms because a120 has non-emulated partiton and wiko rainbow/Explay Fresh has emulated partiton. Thats the only reason for soft brick. If you flash wiko stock rom and then your kernel with wiko ramdisk it will boot easily.
Click to expand...
Click to collapse
Thanks friend !!!
In my opinion it is better to start from a Wiko/Explay rom .
No need repartitioning. And they have worked longer on polishing errors.
Explay especially. already have 3 kitkat updates. And the newest kernel for all.
For problems with Wiko partitions (very small to recovery). I have a android_scatter with custom partitions for Wiko, and also a fully functional touch recovery. Soon share.:good::good:
moonrotation said:
Thanks friend !!!
In my opinion it is better to start from a Wiko/Explay rom .
No need repartitioning. And they have worked longer on polishing errors.
Explay especially. already have 3 kitkat updates. And the newest kernel for all.
For problems with Wiko partitions (very small to recovery). I have a android_scatter with custom partitions for Wiko, and also a fully functional touch recovery. Soon share.:good::good:
Click to expand...
Click to collapse
The kernel source is of Explay fresh only. And about recovery just try philz recovery that i posted some time ago. Full touch recovery. Compiled from source.
Siddhesh.K15 said:
The kernel source is of Explay fresh only. And about recovery just try philz recovery that i posted some time ago. Full touch recovery. Compiled from source.
Click to expand...
Click to collapse
It is this?
http://forum.xda-developers.com/can...pment/cwm-6-0-5-1-philz-touch-6-58-7-t2916856
moonrotation said:
It is this?
http://forum.xda-developers.com/can...pment/cwm-6-0-5-1-philz-touch-6-58-7-t2916856
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/general/philz-touch-6-59-0-cwm-6-0-5-1-t2980650
^This
Some Benchmark scores
Can you add toolchains to repo?
I'm a little lost with Linaro, cortex-a7 and mtk
http://forum.xda-developers.com/showthread.php?p=36677987#post36677987
Take from here
Is it possible add tweaks for improved in ear sound quality, as the sound quality in ears worse than any other phone in this price segment.
There is some sort of audio clipping on higher volumes. Even Viper4audio is not upto the mark with this device.
V2 Released
V2 is released Now
Siddhesh.K15 said:
V2 is released Now
Click to expand...
Click to collapse
Hey, will you please add init.d support in the kernel too.
Siddhesh.K15 said:
First Custom Kernel for Micromax Canvas 2 Colors A120
WARNING:
Code:
I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Xprokernel V2 changelog
Features of Xprokernel V1
Use Trickster mod App to change governors
Intructions
Download the boot.img
Backup your data first
Flash the boot.img alone using Sp flash tool
DOWNLOADS :
Xpro KernelV2
Xpro KernelV1
Kernel Source : https://github.com/SiddheshK15/tinno82_S5501
Credits
Sk.D and mr-illusionist For testinjg
Important Notes
This kernel is tested on wiko stock rom only
This kernel will work on roms having emulated partiton
If you want to include this in your custom rom take wiko stock rom was base rom and port the desired rom. Abviously with credits and link to the thread.
Click to expand...
Click to collapse
Undervolting doesn't work. No Overclock/Underclock working.
shashankgfx said:
Undervolting doesn't work. No Overclock/Underclock working.
Click to expand...
Click to collapse
You can see here as undervolt has been added:
https://github.com/SiddheshK15/tinno82_S5501/commit/441cbe1bebcf08dcadeebf072ac41ca8f7cbbf92
Nowhere does it say that this kernel has overclock/underclock.
Siddhesh.K15 is doing excellent work. Be patient guys :good:
Xpro_V2_Initd
Xpro_V2_Initd flashable zip is available now
Xpro_V2_Initd
thanks to @umangleekha
Will did work in stock KitKat????
Bunny Meher said:
Will did work in stock KitKat????
Click to expand...
Click to collapse
Yes, stock kitkat from wiko
Wiko Rainbow,MyPhone Agua Rio,MicromaxA120 C2C,Explay Fresh ,QMobile i9,BLU Studio 5.0CHD
MIUI 7 V5.9.1 MULTILANGUAGE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DO NOT USE MY WORK WITHOUT MY PERMISSION, FROM NOW ON I WILL REPORT ALL LINKS AND PORTS THAT YOU USE WITHOUT MY PERMISSION OR WITHOUT A LINK TO MY YOUTUBE VIDEO AND MY CREDITS.
Code:
*** Disclaimer
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research and read my tutorials and instructions carefully.
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, i will ignore it.
*/.
CHANGELOG 7
better ram management with 450+ free ram
camera working 100%
rebased to v13 kitkat wiko firmware
great camera and video quality
app2sd supported
battery backup awsome
3G on both SIM CARDS
Known bugs:
you tell me..
INSTRUCTION TO INSTALL MIUI 7 KITKAT ROM:
1. You must be on wiko base.
2. Boot into recovery and wipe/system, wipe/data. If you're on Philz recovery, choose clean to install a new ROM. wipe cache/ wipe dalvik cache. recommended is my TWRP 2.8.2.2 DOWNLOAD HERE:
3. Now select Install zip and browse to the location where you have MIUI7 5.9.1_WR.zip and install it.
4.reboot
DOWNLOADS:
http://smokermanxda.blogspot.pt/2015/09/miui-7-591-multilanguage.html
IF YOU LIKE MY WORK PLEASE CONSIDER A SMALL DONATION.
Click to expand...
Click to collapse
GPL:
The kernel included in this ROM is changed from original 4.4.2 kernel WIKO RAINBOW with ramdisk change to match original kernel included in HONGMI NOTE3G.
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: STABLE
Stable Release Date: 2015-08-05
Created 2015-04-03
Last Updated 2015-08-24
Click to expand...
Click to collapse
F.A.Q
a)i dont know what is WIKO BASE..can you explain?
-see my tutorial and videos explaining in 5 minutes here:http://forum.xda-developers.com/android/general/tutorial-t3070293
b)i have GPS problems,how i fix it?
-see my easy solution here:http://smokermanxda.blogspot.pt/2015/05/gps-fix-for-kitkat-roms-wiko-rainbow.html
c)can i flash WR kernel MIUI by moonrotation?
-NO.
d)i have MyPhone Agua Rio,MicromaxA120 C2C,Explay Fresh ,QMobile i9,BLU Studio 5.0CHD can i flash this rom?
-yes, you can , but first you need wiko rainbow firmware kitkat, flash it with SP FLASHTOOLS , see here :http://forum.xda-developers.com/android/general/tutorial-t3070293
e) i ve lost my IMEI, now what?
-easy, see here how to restore it:http://smokermanxda.blogspot.pt/2015/05/fix-imei-wiko-rainbow-micromax-a120.html
f) i dont have camera working, now what?
-flash kernel v13 first and then make all wipes and flash this rom
Click to expand...
Click to collapse
CREDITS: smokermanXDA,geobaby and ARGN TEAM for original rom ported from here:http://forum.xda-developers.com/android/development/rom-miui-6-5-7-6-gionee-m2-argn-t3152720
.
this thread has been done to be a clean thread from the other versions me and vibhu0009 did..and its only for WIKO BASE KITKAT, please dont ask for FOTA or STOCK KK MMXA120, that you can find here by vibhu0009 only:http://forum.xda-developers.com/showpost.php?p=59253313&postcount=1
thank you all.:good:
@vibhu0009 if you can link it on #1 post please my friend..only for wiko rainbow kitkat base users of course.
Yeah sure... already done @smokerman
---------- Post added at 01:30 AM ---------- Previous post was at 01:25 AM ----------
Awesome work @smokerman
does it requires to have v13 wiko based phone to flash this update or your rom?
or even if just v11 wiko based ?
gunzgunz said:
does it requires to have v13 wiko based phone to flash this update or your rom?
or even if just v11 wiko based ?
Click to expand...
Click to collapse
you can try on any version kitkat wiko base.
smokerman said:
you can try on any version kitkat wiko base.
Click to expand...
Click to collapse
thanks then :good::good::good:
gunzgunz said:
thanks then :good::good::good:
Click to expand...
Click to collapse
seems to have a camera problem if users dont have v13 wiko base kitkat..please if you have v10 or v11 report what problems you have.
smokerman said:
seems to have a camera problem if users dont have v13 wiko base kitkat..please if you have v10 or v11 report what problems you have.
Click to expand...
Click to collapse
camera is not working here @ v11 also cant mount sd card
ill just upgrade my phone to v13 then :good::good::good:
gunzgunz said:
camera is not working here @ v11 also cant mount sd card
ill just upgrade my phone to v13 then :good::good::good:
Click to expand...
Click to collapse
for those with camera problems and others:
download here:http://smokermanxda.blogspot.pt/2015/05/miui-6-551-multilanguage-wiko.html
changed internal storage for external storage
removed xperia keyboard (laggy)
added google keyboard material light
more free ram +500
camera photos, twiiter,facebook all saved on SD CARD now
a few more.
edited.
MIUI6_V7 5.5.1 CAMERA/STORAGE FIX FINAL WORKING 100%:https://www.androidfilehost.com/?fid=23991606952614475
updated..:good:
Hello . i am on v13 base . if i flash it now i will have no bug ??
mourad999 said:
Hello . i am on v13 base . if i flash it now i will have no bug ??
Click to expand...
Click to collapse
rom is rebased to v13....i have it also and its all working for me..
smokerman said:
rom is rebased to v13....i have it also and its all working for me..
Click to expand...
Click to collapse
When i buy the phone I have the kk vesion 8 (v13)
Am i obligated to reinstall it with sp flashtool ??
smokerman said:
rom is rebased to v13....i have it also and its all working for me..
Click to expand...
Click to collapse
camera not workinng
even after flashing the camerafix zip
wiko 13 base
some users said that after flashing v10 base camera works..dont know why for some dont work..im on v13 wiko and works also!
smokerman said:
some users said that after flashing v10 base camera works..dont know why for some dont work..im on v13 wiko and works also!
Click to expand...
Click to collapse
I'm problem in v13 too (camera and flash...)
Are you add a file in you're v13 before flash miui? are you wipe date,cache & dalvik (i'm new v13 (spflash, after install philz recovery (with kingroot & rashr)
After i wipe for new rom (option philz) after flash miui and.. bug :/
I flashed miui6 patch and same problem.
Why does the original ported ROM have much more languages than this port from it? Look at here:
http://en.miui.com/thread-110436-1-1.html
has been reported by users that this rom works fine with v10 kitkat firmware..flash it with SP FLASHTOOLS:
https://www.androidfilehost.com/?fid=23991606952593498
i have v13 firmware now..flashed also with SP FLASHTOOLS and camera works 100% for me..so i dont know what happen to you guys..but something you did wrong..
@Lecterr..this is a port, so i have ported that rom but with my changes to make it faster and better..are you gonna ask now why my port has a different font also? or why audio settings FC? this is the base from future updates..any language you need in specific?:good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamHorizon's XenonHD rom builds for Xiaomi MI3w/MI4 (aka cancro))
http://www.xenonhd.com/
XenonHD is a custom firmware aka ROM for various Android devices. It is based on LineageOS 14.1 with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Device Source:
https://github.com/TeamHorizon/android_device_xiaomi_cancro
https://github.com/TeamHorizon/android_kernel_xiaomi_cancro
Flashing Instructions:
To install this ROM you will need to have a latest custom Recovery such as TWRP installed.
Copy the downloaded ROM to your phone.
Boot into your recovery
Back up your ROM
Enter recovery
Make a full wipe (system, data, cache, dalvik)
Install the ROM
Install GAPPS package
Reboot - the first boot can take up to 5 minutes
Download Links:
ROM: Official / experimental / AFH mirror
Gapps: opengapps.org
MicroG: microg.org[/SIZE][/CENTER]
Main features:
XenonOTA
XenonHD Changelog
NovaLauncher, Adaway, Kernel Adiutor, SuperSU
Root, adb, dev options, advanced reboot & installing apks enabled by default
Pixel UI, navbar, wallpaper
Material sounds & icons
DayNight theme
Network indicator & battery bar in status bar
Live Volume Steps
DT2S on lockscreen
Custom Quick Settings Tiles
Removed unnecessary things
Under the hood improvements and optimizations
...and more on the way!Bugs:
Same as on LineageOS
Links:
G+: https://plus.google.com/u/0/communities/110254322179967248992
Github: https://github.com/TeamHorizon?tab=repositories
Crowdin (translations): https://crowdin.com/project/xenonhd-rom
Changelog (auto-updated): https://mirrors.c0urier.net/android/teamhorizon/Changelog.txt
XDA:DevDB Information
Official XenonHD 7.1.2_r2 ROM by TeamHorizon, ROM for the Xiaomi Mi 3
Contributors
Dr. Ramm, linuxxx
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: twrp, merged partitions
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2016-10-28
Last Updated 2017-04-18
reserved for links
Main link is here
temp folder (while preparing builds from team horizon)
https://www.androidfilehost.com/?w=files&flid=123573
reserved 2
Downloading :good:
Thank you
He he he ! Thanks @dr.ramm ???
Sounds good
Downloading
worth a wait . thanks:angel:
great rom!!
is there anyway to disable headup notification?
Bugs?
Dr. Ramm said:
TeamHorizon's XenonHD rom builds for Xiaomi Mi3w/Mi4w (cancro)
http://www.xenonhd.com/
XenonHD is a custom firmware aka ROM for various Android devices. It is based on CyanogenMod with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Device Source:
https://github.com/TeamHorizon/android_device_xiaomi_cancro
https://github.com/TeamHorizon/android_kernel_xiaomi_cancro
Flashing Instructions:
To install this ROM you will need to have a latest custom Recovery such as TWRP or PhilZ installed.
Copy the downloaded ROM to your phone.
Boot into your recovery
Back up your ROM
Enter recovery
Make a full wipe (system, data, cache, dalvik)
Install the ROM
Install GAPPS package
Reboot - the first boot can take up to 5 minutes
Download Links:
ROM: see below
Gapps: opengapps.org
XDA:DevDB Information
Official XenonHD 7.0 ROM by TeamHorizon, ROM for the Xiaomi Mi 3
Contributors
Dr. Ramm, linuxxx
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: twrp, merged partitions
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-10-28
Last Updated 2016-10-28
Click to expand...
Click to collapse
Downloading .
tks
rotation not work
thinhx2 said:
rotation not work
Click to expand...
Click to collapse
for me - everything is fine. btw build with working camera rec is uploaded on afh
https://mirrors.c0urier.net/android/teamhorizon/experimental/cancro/
Dr. Ramm said:
https://mirrors.c0urier.net/android/teamhorizon/experimental/cancro/
Click to expand...
Click to collapse
changelog?
zeref18 said:
changelog?
Click to expand...
Click to collapse
upstream changes + working video rec + official tag
Dr. Ramm said:
upstream changes + working video rec + official tag
Click to expand...
Click to collapse
thanks for your work sir..
battery status style not work
zeref18 said:
battery status style not work
Click to expand...
Click to collapse
I know, team horizon didnt have time for fix it =(
Dr. Ramm said:
I know, team horizon didnt have time for fix it =(
Click to expand...
Click to collapse
i flash 161030 experimental build
-encounter forceclose on setupwizard
other than that, everything is working flawlessly
thanks dev :highfive:
ooh, btw, u need to update thread cause it is based on 7.1
i got an error while flashing gapps7 . i download gapps7.1 and flash and it work :laugh:
Anarchy16 said:
ooh, btw, u need to update thread cause it is based on 7.1
i got an error while flashing gapps7 . i download gapps7.1 and flash and it work :laugh:
Click to expand...
Click to collapse
Ohhhh i m so sorry, forget to change it...yeah, use opengapps 7.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android OS version: 8.1.0_r33
For devices: YU Yunique
Authors build: @xyyx
Source code: [url]https://github.com/nitrogen-project[/URL]
Thanks: @shekhawat2, @theHari08, @amangupta
Google Apps: opengapps.org
Recovery: TWRP
Attention:
I don't force you to use my ROM. I fix bugs that doesn't require many commits from CAF.
If you don't like something, please, use another ROM and don't write in this thread. Please.
Based on AOSP
xyyx (Max) - main developer
Copy the ROM and Gapps in SD card.
Go to your recovery
Wipe Cache, Dalvik, System and Data
Install ROM and Gapps zip.
Reboot - 1st boot takes around 4-8 minutes.
Enjoy
Latest build
Go Edition
Translated to EN, RU, CS, SK, PT-BR
If you like my ROM, you can support me.
Nitrogen Project
Bugs:
XDA:DevDB Information
NOS-OREO, ROM for the YU Yunique (JALEBI)
Contributors
@Maaz Muzammil @chaubeyprateek
Source Code: [url]https://github.com/nitrogen-project[/URL]
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: AOSP, OmniROM, LOS, Pure, DU
Version Information
Status: Stable
Created 2017-12-26
Last Updated 2018-06-14
RESERVED
Will this one have boot issues as well?
Andy2290 said:
Will this one have boot issues as well?
Click to expand...
Click to collapse
Same why we are getting boot issue ? in 8.1 Oreo rom only.!
As suspected this one doesn't boot either
Everything working fine here, booted on 1st attempt with the installed gapps package without any custom kernel. The ROM is feature rich, you will get almost every (or more than every) customization opting as you see in Viper OS. Can't say a lot more about battery, it need some to settle. But it is the most feature rich Oreo for Yunique still now.
Great workkk...!
anyone give a review bout performance and battery will b appreciated
coool will give this one a try
and what about the gapps can i flash any version of it??
and also @debaadak which camera app does this have
Flashed stock rom and then tried flashing it, flashed all the kernels there are for yunique, flashed with and without the gapps but the rom won't boot. I need a fix
Andy2290 said:
Flashed stock rom and then tried flashing it, flashed all the kernels there are for yunique, flashed with and without the gapps but the rom won't boot. I need a fix
Click to expand...
Click to collapse
Which version of stock u flashed?
Ankush1999 said:
Which version of stock u flashed?
Click to expand...
Click to collapse
V2
Andy2290 said:
V2
Click to expand...
Click to collapse
Flash v 1 and report
nischait said:
Flash v 1 and report
Click to expand...
Click to collapse
Provide me the link for V1
which gapps did u downloaded??
from opengapps or some other
for whom not booting make sure you have stock bootloader and latest TWRP(3.1.1 by popi)
Battery drain is there because default kernel profile is performance
you can change cpu governer to conservative to reduce battery drain
I'm getting random reboots
But by far this is the best oreo 8.1 ROM for yunique
Great Work
esave said:
for whom not booting make sure you have stock bootloader and latest TWRP(3.1.1 by popi)
Battery drain is there because default kernel profile is performance
you can change cpu governer to conservative to reduce battery drain
I'm getting random reboots
But by far this is the best oreo 8.1 ROM for yunique
Great Work
Click to expand...
Click to collapse
thanks for this info
and did you flashed the gapps as well? and which one.
also which camera app does this have??
ak117 said:
thanks for this info
and did you flashed the gapps as well? and which one.
also which camera app does this have??
Click to expand...
Click to collapse
I flashed the pico open gapps given in the OP
the stock camera app was google cam but the photos were very dark so i removed it and installed footej
Andy2290 said:
Flashed stock rom and then tried flashing it, flashed all the kernels there are for yunique, flashed with and without the gapps but the rom won't boot. I need a fix
Click to expand...
Click to collapse
I flashed Stock ROM V1.0 but it does not boot.
Check for updates in stock ROM
Download and update stock ROM.. ( there are two updates . about 300 MB)
Now take backup of all the partitions using partition backup app on mobile phone)
Your ROM will boot now , My ROM also boots by doing so.
In future if you have such problem then you flash the aboot, tz,hyp,rpm,modem,sbl1,splash partitions ( from the backed up partitions) using fastboot mode..
This is good ROM , nice battery backup.
I don't flash any kernel ,
I flash only ROM and gapps..
I think it work for you.
esave said:
I flashed the pico open gapps given in the OP
the stock camera app was google cam but the photos were very dark so i removed it and installed footej
Click to expand...
Click to collapse
thanks a lot
yes that why i was asking the google cam clicks dark picture
is it possible to simply push the snap cam apk in system , have u tried it bcoz snap cam i think is the best for our device?