Samsung Galaxy s4 at&t hard brick help pls - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

I have a Samsung Galaxy s4 at&t I just upgrade it to 4.4.4 kitkat using safetra recovery method and I want to install a custom tom that y I wanna install cwm recovery from Loki but I find it difficult to install one of my told me I should unlock the boot loader that it will work then I search every forum to unlock the boot loader but I can't find and I saw the EZ UNLOCK4 APK after I install it I click unlock it says unlock successfully the I power my phone to try boot to recovery that how my phone totally dead have replace the Battery still same to power on no sign on PC pls help me pls.
Can USB JIG work on it?

Someone should help me pls

What did you flash on it prior to it bricking? If it won't turn on there's nothing much you can do. You could try jtag. Google mobiletechvideos.com
Sent from my Nexus 5 using XDA Free mobile app

SOJAYeverlast said:
I have a Samsung Galaxy s4 at&t I just upgrade it to 4.4.4 kitkat using safetra recovery method and I want to install a custom tom that y I wanna install cwm recovery from Loki but I find it difficult to install one of my told me I should unlock the boot loader that it will work then I search every forum to unlock the boot loader but I can't find and I saw the EZ UNLOCK4 APK after I install it I click unlock it says unlock successfully the I power my phone to try boot to recovery that how my phone totally dead have replace the Battery still same to power on no sign on PC pls help me pls.
Can USB JIG work on it?
Click to expand...
Click to collapse
Yes, a USB jig will work to put the phone into download/odin mode. You can't use LOKI or Clockwork mod recovery on the at&t galaxy s4 unless you are on the MDL bootloader running Android jelly bean 4.2.2, and no you cannot downgrade if you are on kitkat. You can't unlock the bootloader either as at&t has it locked up tight. If you are on kitkat, then you must use safe strap for ROMs.

StoneyJSG said:
Yes, a USB jig will work to put the phone into download/odin mode. You can't use LOKI or Clockwork mod recovery on the at&t galaxy s4 unless you are on the MDL bootloader running Android jelly bean 4.2.2, and no you cannot downgrade if you are on kitkat. You can't unlock the bootloader either as at&t has it locked up tight. If you are on kitkat, then you must use safe strap for ROMs.
Click to expand...
Click to collapse
Once you get phone in Download mode Odin MB1 stock then after you setup phone you can Update it back to 4.4.4 in settings. http://forum.xda-developers.com/showthread.php?t=2674223

Related

[Q] HELP !!! MF3 Root Fail Bricked

I just followed this thread and successfully rooted my S4
http://forum.xda-developers.com/showthread.php?t=2387577
I think i deleted some core apps thru titanium backup and the phone could not display normally (keep Blinking)
then I tried to downloaded Goo Manager and installed TWRP Recovery on my S4. when I restart my phone can only boot to ODIN mode. I fixed this by using
http://forum.xda-developers.com/showthread.php?t=2360859
Now the phone can boot up but stuck at ATT logo Screen. Any body can help me?
PS. I try KIES emergency recovery and it keep telling me there is a error of updating.
I bricked my s4 (i337 Canadian, bell) the day I bought it, TWRP 2.6.0.0 was what bricked my phone (I think, or improper use of TWRP) and it wouldn't boot whatsoever (even my recovery was bricked), I managed to fix it by flashing stock firmware from ODIN 1.85 on PC to the phone (couldn't access recovery, so I flashed from PC) , make sure you download a stock firmware that is .tar to use with the PC version of ODIN, the second thing I had to do was flash CF Auto Root again using ODIN 1.85 from PC to phone, since I still couldn't boot my phone or recovery (other root flashing methods wouldn't unbrick my phone, but CF Auto Root did, download the MF3 version of CF auto root).
after all this crap I installed TWRP 2.5.0.0 as my recovery and haven't had any issues since :victory:
this was done on a I337MVLUAMG1 which I believe is the bell equivalent of the MF3 (update that blocked rooting by most methods like motochopper ect)
Thanks
Amb669 said:
I bricked my s4 (i337 Canadian, bell) the day I bought it, TWRP 2.6.0.0 was what bricked my phone (I think, or improper use of TWRP) and it wouldn't boot whatsoever (even my recovery was bricked), I managed to fix it by flashing stock firmware from ODIN 1.85 on PC to the phone (couldn't access recovery, so I flashed from PC) , make sure you download a stock firmware that is .tar to use with the PC version of ODIN, the second thing I had to do was flash CF Auto Root again (other root flashing methods wouldn't unbrick my phone, but CF Auto Root did, download the MF3 version of CF auto root).
after all this crap I installed TWRP 2.5.0.0 as my recovery and haven't had any issues since :victory:
this was done on a I337MVLUAMG1 which I believe is the bell equivalent of the MF3 (update that blocked rooting by most methods like motochopper ect)
Click to expand...
Click to collapse
Thanks for your reply.
I have the same problem as this guy
http://forum.xda-developers.com/showthread.php?t=2407950
Any Idea how to fix it?
jerryhuanginusa said:
I just followed this thread and successfully rooted my S4
http://forum.xda-developers.com/showthread.php?t=2387577
I think i deleted some core apps thru titanium backup and the phone could not display normally (keep Blinking)
then I tried to downloaded Goo Manager and installed TWRP Recovery on my S4. when I restart my phone can only boot to ODIN mode. I fixed this by using
http://forum.xda-developers.com/showthread.php?t=2360859
Now the phone can boot up but stuck at ATT logo Screen. Any body can help me?
PS. I try KIES emergency recovery and it keep telling me there is a error of updating.
Click to expand...
Click to collapse
Dont thinknthere is antthing you can do. We have no return to stock method at this point in time. This is why it is important to follow forum rules and read and search before doing something youll regret, im nkt saying this to be mean...but there has been at least 5 people these past few days who have done the exact same thing as you and have gone in here looking for help...
My best advice, throw in some money for the bootloader unlock bounty and hope somethung happens soomer than later
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
jerryhuanginusa said:
I just followed this thread and successfully rooted my S4
http://forum.xda-developers.com/showthread.php?t=2387577
I think i deleted some core apps thru titanium backup and the phone could not display normally (keep Blinking)
then I tried to downloaded Goo Manager and installed TWRP Recovery on my S4. when I restart my phone can only boot to ODIN mode. I fixed this by using
http://forum.xda-developers.com/showthread.php?t=2360859
Now the phone can boot up but stuck at ATT logo Screen. Any body can help me?
PS. I try KIES emergency recovery and it keep telling me there is a error of updating.
Click to expand...
Click to collapse
If you read through the threads it specifically stated that the MF3 boot loader is locked and you cannot install twrp or custom ROMS on it. I have seen so many posts regarding this it makes me sick. It's kies seeing the device? But is falling to recover? Or is it not seeing it?
Tylor
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
http://forum.xda-developers.com/showpost.php?p=44570305&postcount=366
Fail to recover
Tylorw1 said:
If you read through the threads it specifically stated that the MF3 boot loader is locked and you cannot install twrp or custom ROMS on it. I have seen so many posts regarding this it makes me sick. It's kies seeing the device? But is falling to recover? Or is it not seeing it?
Tylor
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
the Kies can detect the phone buy it fail to recover it. the progress bar runs a little and stopped. error message pop out on PC screen says "Emergency recovery failed, Please contact Samsung Customer Service"

[Q] SafeStrap Installs Recovery In 4.3 But wont boot into it

I am on MK2 4.3 and I have Safestrap installed and I installed the recovery and when I reboot into recovery It goes to the Custom screen then it fails to Go to the Splash screen where I can choose to go into TWRP . I had this working on MF3 but I had bricked my phone and and had to flash the allin one to fix it . I am successfully rooted with safestrap installed .. ANY IDEAS would be greatly appreciated...Thanks By the way it Says Safe system : Not Active. I thought I remember it saying Active before
Also is there another way to install a Recovery. Im coming from a Tmobile GS2 where you could flash recovery once within Odin and after that you could just flash different versions of Twrp or Cwm when needed. No locked boot loader . I always thought HTC was the only phones with locked boot loaders . I have been doing a lot of reading prior to posting this question and have been up all night . After bricking last night and recovering from it I got a crash course with this device.
spirodave said:
I am on MK2 4.3 and I have Safestrap installed and I installed the recovery and when I reboot into recovery It goes to the Custom screen then it fails to Go to the Splash screen where I can choose to go into TWRP . I had this working on MF3 but I had bricked my phone and and had to flash the allin one to fix it . I am successfully rooted with safestrap installed .. ANY IDEAS would be greatly appreciated...Thanks By the way it Says Safe system : Not Active. I thought I remember it saying Active before
Also is there another way to install a Recovery. Im coming from a Tmobile GS2 where you could flash recovery once within Odin and after that you could just flash different versions of Twrp or Cwm when needed. No locked boot loader . I always thought HTC was the only phones with locked boot loaders . I have been doing a lot of reading prior to posting this question and have been up all night . After bricking last night and recovering from it I got a crash course with this device.
Click to expand...
Click to collapse
Check your root condition is valid. If you do not have root you can not install the safestrap recovery.
To go to the safestrap you do not need to reboot into the recovery. You simply reboot as normal and safestrap splash screen would come up.
You can use odin to flash the recovery in the download mode or you can use adb command to push the recovery.
AT&T and verizon G4 bootloaders are locked. You can not unlock like HTC S-off. You can only exploit the bootloader with different methods based on your firmware version.
Simply reboot the phone and on boot up it will show you the splash screen. Not active means that stock slot is still selected.
Sent from my SGH-I337 running GPE using Tapatalk
sway8966 said:
Check your root condition is valid. If you do not have root you can not install the safestrap recovery.
To go to the safestrap you do not need to reboot into the recovery. You simply reboot as normal and safestrap splash screen would come up.
You can use odin to flash the recovery in the download mode or you can use adb command to push the recovery.
AT&T and verizon G4 bootloaders are locked. You can not unlock like HTC S-off. You can only exploit the bootloader with different methods based on your firmware version.
Click to expand...
Click to collapse
Im an idiot. I just realized I have been using the safestrap.apk I had on my sd that was for MF3. This will be my problem
jmjoyas said:
Simply reboot the phone and on boot up it will show you the splash screen. Not active means that stock slot is still selected.
Sent from my SGH-I337 running GPE using Tapatalk
Click to expand...
Click to collapse
Im an idiot. I just realized I have been using the safestrap.apk I had on my sd that was for MF3. This will be my problem..Problem solved.When you said the wrong slot was selected it made a light bulb light up in my head..Thanks bro

[Q] KitKat soft brick. verizon unauthorized software found.

So I was able to root for the first time with Towelroot. That was successful and the I downloaded the clockwork mod and rom manager to attempt to flash Cyanogenmod. however after installing those two apps I restarted and when it booted up it now only shows the error message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help. I do believe that I created a backup on my SD card but I cannot access it and I cant seem to be able to even use Odin to get my phone back to stock Kit Kat firmware. Can somebody please help figure out how to get my phone to boot back up and hopefully keep my root intact?
If your on a retail note, you can't run cm so you would need to Odin back to stock nc4 and re root with towel root and install safe strap recovery . If on developer note 3 dis regard and wait for someone with a dev phone to answer.?
thanks
Okay thanks but wouldn't that just put me back into a bootloop again? using safestrap and towelroot put me in this situation and I don't know what caused this issue and I would like to avoid it at all if possible on my next attempt. Is it because I didn't unlock the bootloader?
Tay-lin said:
Okay thanks but wouldn't that just put me back into a bootloop again? using safestrap and towelroot put me in this situation and I don't know what caused this issue and I would like to avoid it at all if possible on my next attempt. Is it because I didn't unlock the bootloader?
Click to expand...
Click to collapse
You can't unlock the bootloader on a retail Note 3.
Towelroot and Safe strap didn't get you in this situation.
You need to do a bit more research and read up before continuing.
All we have is root.
Safe strap is needed to run custom roms.
There are no custom kernels available since the bootloaders locked.
So don't try to use cwm.
Try to get your phone in download mode and odin the stock tar then root again and install Safstrap 3.75 build 4.

Error when trying to install custom recovery (TWRP or CWM).

Yet another post... So, I have been trying to install TWRP and CWM but every time I boot into recovery with those installed I get: "System Software not Authorized" error. Is there anyway to bypass this? I think I Soft Bricked it, but I fixed it with Odin and a stock recovery file. I just want to get a custom recovery... Any help is appreciated.
Device: Samsung Galaxy S4 I337 (AT&T) (Rooted)
Can't install cwm or twrp on an s4 with a locked bootloader.
Hmm that is strange.
audit13 said:
Can't install cwm or twrp on an s4 with a locked bootloader.
Click to expand...
Click to collapse
How would I go about unlocking it? I remember before the s4 got the 5.0.1 update and I had cwm.
The att s4 bootloader can't be unlocked once it has been upgraded to a locked bootloader.
That sucks. Is there another phone that can unlock it's boot loader? I head something about asking the company to unlock it for you. Is that possible?
Quick little update:
I have found some options that might work. Option 1: Someone said that you could downgrade to 4.2.2 because that has an unlocked boot loader. Or option 2, which is go to Best Buy and tell the Samsung Support Center dude to unlock it for you. I really would rather go with option one, because what if the dude denies it. Unless, because I already got the locked one on my device, there is no way to downgrade it...
There is no way to downgrade the bootloader to 4.2.2 or to unlock the bootloader.
Right, well I installed Safestrap and updated to 5.0.1 with keep root method. Something I just realized is that we have a s2 laying around somewhere. I guess I can mess with that. And as for a new phone, I guess I will save up to buy a Nexus 6 from the Google site.

Something really strange with my Galaxy S4

Lately, I wanted to root my GS4 (it surely wasn't an AT&T one, bought it in Russia, there is no AT&T). So, motochopper fails, CF-Auto-Root fails, everything fails! I am stuck at 4.4.2 and there is no OTA upgrade. Download mode says "MODEL NUMBER: SGH-I337", but in the "About phone" menu it is clearly stated that model number is "GT-I9500" and build number is "KOT49H.I9500XXUFNB7". Even the baseband version starts with "I9500". All the hacks I am seeing on the Internet (such as Loki) for unlocking bootloader fail, saying that my phone model is not supported. Heimdall and Odin fail to flash anything and the red text appears in the download mode: "SECURE MAGICODE CHECK FAIL". What my model is and what do I DO? I want to root it and install some decent recovery and CWM ROM.
Please, ask any questions you like and help me)
The model number in download mode is the right one. Once the bootloader on the i337 is locked, it cannot be unlocked.
A locked bootloader means cwm and twrp cannot be installed.
audit13 said:
The model number in download mode is the right one. Once the bootloader on the i337 is locked, it cannot be unlocked.
A locked bootloader means cwm and twrp cannot be installed.
Click to expand...
Click to collapse
Why can't it be unlocked? I've seen so many guides and tools to do it. The problem is that they don't work and I don't even know my true build version to figure smth out. Why doesn't it even root like normal I337 should do? Also it doensn't upgrade to lollipop like normal I337 should.
The bootloader is locked on the i337, just like it is on other at&t phones, with no way to unlock it. An s4 bounty on XDA for finding an unlock method remains unclaimed: http://forum.xda-developers.com/showthread.php?t=2257620
The phone is an i337 and can only run stock i337 roms or customs based off a stock rom.
Safe strap is the only custom recovery available for a locked bootloader.
audit13 said:
The bootloader is locked on the i337, just like it is on other at&t phones, with no way to unlock it. An s4 bounty on XDA for finding an unlock method remains unclaimed: http://forum.xda-developers.com/showthread.php?t=2257620
The phone is an i337 and can only run stock i337 roms or customs based off a stock rom.
Safe strap is the only custom recovery available for a locked bootloader.
Click to expand...
Click to collapse
So, ok. We managed to confirm it is a SGH-I337. But what about Loki tool? It can install CWM recovery, but does not work on my device? Also, I ask one more time, how can I know what the real build number is? And how to root? All SGH-I337 should root with motochopper but mine doesn't. What can I do about this?
Cwm and twrp cannot work on the phone. I have never seen a post where someone has ever had it work with a locked bootloader.
I'm not sure but motochopper may not work with every bootloader and every rom. Reading through this forum, I don't think I remember seeing motochopper mentioned.
You'll have to confirm the bootloader and rom in the phone and search through the various rooting threads. I don't have access to the i337, only the i337m as I am in Canada.

Categories

Resources