Related
hey guys i have a Question... i have managed to boot android on a USB Stick and At start up "bios" i can pick that to boot from, no emulation just android standalone, any one know if you can do this on a toshiba encore, im not sure how you would get to the Bios on a windows Tablet...
Also is there any USB to Bluetooth Converters?
cheers craig.
Most of the windows tablets either require a keyboard connecting on startup or a combo of the windows button + a volume key to enter BIOS.
As for USB to bluetooth, 35 billion results on google werent enough? They are *very* common, cheap too.
SixSixSevenSeven said:
Most of the windows tablets either require a keyboard connecting on startup or a combo of the windows button + a volume key to enter BIOS.
As for USB to bluetooth, 35 billion results on google werent enough? They are *very* common, cheap too.
Click to expand...
Click to collapse
i ment if i were to install Android to a Micro SD, "like i did on my Desktop, and made a dual boot and windows but on a HDD" would i be able to boot from it? ie what about the touch drivers would there need to be support or would it run all ok? im guessing someone would have to make drivers for it to work?
cheers craig.
You didnt mention anything about installing android to microSD, just asked about bluetooth and opening the BIOS.
Atom does not support booting from SD.
There are a few devs working to build kernel and build for Asus t100 and dell venue 8 pro.
Do you think their work and progres can be applied on the toshiba Encore according the same bay trail CPU that have in common ?
INstall Android 4.4.x on Encore Dual boot
This is totally Experimental
"i 'm not responsible of any thing "
So Backup first
&
then
First of all you have to Disable Secure Boot
Run these commands in an elevated permissions Windows command shell:
powercfg /h off
manage-bde -status c: (checks bitlocker status)
powershell
PS C:\> Disable-BitLocker -MountPoint "C:"
manage-bde -status c: (after above command finishes, makes sure your disk is really decrypted.)
then disable from boot menu:
to do this:
first shutdown tablet
press vol + & power down to enter boot menu
select setup & disable secure booting
& download Android image for your BayTrail tablet;
https://01.org/android-ia/downloads
After this Follow INTEL official Guide
https://01.org/android-ia/guides/quick-start
Report if Helped;
*Edit: the Android Image provided by Intel is 64bit but most of Our devices have 32bit UEFI, Because of this Image not booting up, As our Devices supported 64bit so Ask toshiba to release A 64bit UEFI for Encore, Or have to wait till Console OS launch publicly
hi umar_fiaz
not directly related to this as i dont want to do a dual boot, (i cant even image my encore), however if i could though id happily put android onto it also..
just wondered if you could look at this which i posted elsewhere, and give me any advice, thanks
i have an encore. i recently selected the option to delete data and partitions, via the maintenance utility, thinking i was restoring it to factory defaults. i didnt make a recovery disk. i didnt think id need one.
aps2.toshiba-tro DOT de/kb0/HTD4103K90000R01.htm (edited ink to enable posting)
in the lnk above you will see the options listed at "2. Booting to the boot device menu", and i now have nothing present here. i cant boot to usb which is what ive been trying. ive tried w8 images prepared with pendrivelinux DOT com/ (edited ink to enable posting), plus ubuntu and xubuntu and i can not get the encore to read any usb images.NOTHING ever is read by the encore at thuis option after pressing volume up/power
i know there is this situation with intel bay trail and uefi booting, but i really dont understand this, and ultimately i just want an answer on how i can image the thing with w8, or even a linux flavour that is stable, i dont mind
could you please help me with advice and steps on how to get the encore to read a suitable image so i can at least use this thing
much appreciated
ben
benrf said:
hi umar_fiaz
not directly related to this as i dont want to do a dual boot, (i cant even image my encore), however if i could though id happily put android onto it also..
just wondered if you could look at this which i posted elsewhere, and give me any advice, thanks
i have an encore. i recently selected the option to delete data and partitions, via the maintenance utility, thinking i was restoring it to factory defaults. i didnt make a recovery disk. i didnt think id need one.
aps2.toshiba-tro DOT de/kb0/HTD4103K90000R01.htm (edited ink to enable posting)
in the lnk above you will see the options listed at "2. Booting to the boot device menu", and i now have nothing present here. i cant boot to usb which is what ive been trying. ive tried w8 images prepared with pendrivelinux DOT com/ (edited ink to enable posting), plus ubuntu and xubuntu and i can not get the encore to read any usb images.NOTHING ever is read by the encore at thuis option after pressing volume up/power
i know there is this situation with intel bay trail and uefi booting, but i really dont understand this, and ultimately i just want an answer on how i can image the thing with w8, or even a linux flavour that is stable, i dont mind
could you please help me with advice and steps on how to get the encore to read a suitable image so i can at least use this thing
much appreciated
ben
Click to expand...
Click to collapse
So you totally bricked your Encore;
here may be it helps
WiMboot to create Recovery Image, A detailed Step by step Procedure;
Just Get a PC with Windows 8.1 installed on it. & follow the tutorial;
http://forums.toshiba.com/t5/Encore-Tablets/Windows-8-1-WimBoot/td-p/574620
or Get Encore Recovery Media from https://support.toshiba.com/repair
Press Vol+ & power button to enter in boot menu & select recovery media for a fresh start
Hope it 'll help:good:
Okay so for anyone with an encore with the "baytrail" soc and a 32 bit efi only bios or really any bay trail device with a 32 bit efi only bios... I spent my day reading into this dilemma and I managed to boot a modified 64 bit efi of grub with a 32 bit bootxxx.efi (bootia32.efi) and I got grub to boot the live cd of android x86. of course I haven't got passed the blinking cursor but hey I GOT INTO GRUB TO BOOT THE LIVE CD/INSTALLER. Therefore we theoretically have a way to install android, Ubuntu, etc. Now im gonna try to modify the android on intel image (4.4.2_r1-ia2) so it can boot the installer as well. I will report back on any progress.
P.S. I know this post is sloppy but I just want people to know it is POSSIBLE to boot android.
managed to boot Android on Toshiba Encore but when loaded screen goes blank
android-x86-4.4-r2.img from http://www.android-x86.org/releases/releasenote-4-4-r2
I think a supported kernel & drivers for Encore will fix that,....
Any help will be appreciated
Hi,
Sorry, for my poor English. I'm from Turkey. I bought a Reeder W7iC windows Tablet in Turkey. It's the same EMDOOR EM-I8170. I installed the wrong bios file, while android trying to install. Now, tablet won't turn on. Back light is on. I connected keyboard and mouse on usb otg. It all works. l I found the original bios file. How do i run again it? How do i install android? Thank you in advance for your help.
Tablet specifications:
Intel Baytrail-CR Z3735G, Quad Core
1GB DDR3 FLASH 16GB
Windows 8.1
16:9, 7" 1024*600 IPS
Does it have hdmi? Then connect it to a monitor or tv. What happens if you keep pressing both Vol- and Vol+ and then power on the tablet?
Please send a link to the correct bios, then I can try to make a bios flash package for a usb pen drive.
Yes it has hdmi. I connected to tv. I keep pressed Vol+ and vol- and power on the tablet. dnx mode on the tv. Then, what will i do?
I can't write outside link because i'm new users. [*] is [.]
Correct bios file link:
www*reedertablet*com/reeder/yazilim/reeder_w7ic/bios/ReederW7iC_BIOS_UPDATE_V1.6.8.zip
I want to install android.
EM-I8170 Android Files is here. There is bios file, too. I think for android.
yiyun*baidu*com/wap/link?shareid=772798033&uk=3053780477&third=0&dir=%2Fintel%2F7%E5%AF%B8android-I8170&page=1&
How can i install android to tablet? Thanks for reply.
Ok sounds good. So first thing to do is to flash the original bios/firmware. I will prepare a package in the next half hour. You need a usb hub, a usb stick, a keyboard. Power off the tablet now and try to enter bios menu (press del or escape or f12) and post which bios version is installed. Best is to post a photo. PS: I don't own this tablet and will only help you to recover it with the original bios.
I'm at work right now. I can try them when you get home in the evening. I'll write the results.
Assuming you could enter bios and you have a USB hub, usb stick and keyboard, then you can flash the original bios as follows:
============
Flash new bios
============
1. Connect the USB hub to Reeder tablet and plug in the keyboard and the USB thumb drive containing the new bios files. Power on the device and press DEL or Escape to enter into BIOS.
2. Navigate to "[email protected]", and then choose "Launch EFI shell from filesystem device"
3. After entering shell, type FS?: and then press ENTER
( ? stand for a numeric character. It depends where your USB drive resides, for example, if your USB drive is at FS4, you type FS4: You can always try between FS0 and FS4 )
4. Then type dir and then press ENTER to check if you selected the correct drive
5. Type fpt32.efi -f ReederW7iCBIOS_V1.6.8.bin and press ENTER
6. Type fpt64.efi -f ReederW7iCBIOS_V1.6.8.bin and press ENTER
(PS: you may get an error after either running fpt32.efi or fpt64.efi, but make sure at least one of the flash commands succeeded !)
7. Type exit and press ENTER
8. When you return to BIOS, choose "save changes and reset"
Good luck!
Note1: there is a readme.txt which describes how to install dual-boot Android/Win8.1 on a Voyo A1 Mini (also a EMDOOR tablet). This may be helpful for you to install Android on your tablet.
Note2: if you can't enter BIOS then we must try to flash your tablet using DNX protocol
I tried what you wrote. It installed bios from fpt64.efi. Installation completed. I selected Save Changes and Reset in Bios Menu. Frozen in bios menu. I closed the tablet keep power button. It won't turn on. Now, backlight is off. I think it hard brick. Is there anyone who can help me?
I connected to the tv with hdmi cable. Nothing happened.
Are you sure that bios was the original version? Check if battery is charged and also if you can still enter dnx mode.
İt was original bios file v1.6.8. Battery is full. I can't enter Dnx Mode. I connected it to pc. My pc don't see it m3 or m6 chip also. I think it isn't hard brick. It is Deep Brick.
Try also power on with only Vol+ pressed, alternatively with Vol- pressed. It could be it will then switch to 32-bit mode. Otherwise try disconnecting the battery from the mainboard and reconnect after a minute. If that doesn't help you must buy a flash programmer. There are various at Alibaba for about 30$ with cable connectors for on-board programming.
I tried vol+ or vol- and power button, vol+ and vol- and power button. Nothing happened. I cannot try disconnecting the battery. Because i haven't soldering iron. I think i'll send service it.
hi I have a tablet identical to the Reed W7İC.j'ai reinstalled the system and I managed to install all the drivers but my touch is shifted. that is to say, when I press for example the top of the screen is down there he reponse.dans the system at the touch function is written, limited touch support with 10 points of contact. help me if you plait.il is Emdoor EM-I8170. thank you in advance
devinci1 said:
hi I have a tablet identical to the Reed W7İC.j'ai reinstalled the system and I managed to install all the drivers but my touch is shifted. that is to say, when I press for example the top of the screen is down there he reponse.dans the system at the touch function is written, limited touch support with 10 points of contact. help me if you plait.il is Emdoor EM-I8170. thank you in advance
Click to expand...
Click to collapse
My emdoor tablet i82h not are showing display. Does i reprogrammer the BIOS and also not showing the display. came at with windows 10.
i have a Lenovo thinkpad tablet that has a 32bit windows but a 64bit CPU, i'm not sure if EFI / BIOS is 32 or 64
is it possible to use remix OS?
Wrong forum...go to remix os....
Sent from my SHIELD Tablet using Tapatalk
al404 said:
i have a Lenovo thinkpad tablet that has a 32bit windows but a 64bit CPU, i'm not sure if EFI / BIOS is 32 or 64
is it possible to use remix OS?
Click to expand...
Click to collapse
Sorry admins but im replying here so the guy can know an answer! move the topic later
So i have a lenoxo Miix 2 which is very similar and after a lot of work, i've managed to put remix OS in dual boot.
You have to download EFI package from the REmix os Website, extract the img file and put the files in a FAT32 gb partition (make atleast 8gb) then using Easyuefi 2.2 ! (not 2.3) create an entry (linux or other) name it remixOS os whatever you like and browse/select the file in EFI / Boot / bootia32.efi press OK and close Easyuefi
Then reboot your pc/laptop in "BOOT mode" in my lenovo i have to hold volume up and power button for like 5 sec and the lenovo boot menu will appear, from there go to boot menu and select remix os, hopefully it will start and you can ue both resident or guest mode, hope this help, otherwise check youtube for EFI tutorials
Ok during week end i tested remix os on USB ( UEFI version ) with a standard PC with keyboard and monitor, and i could boot to the OS
then i try to use the same USB stick on lenovo thinkpad 8 but i couldn't go farther then resident / guest. I could move selector up and down with volume keys but wasn't able to select ( i try with power button but did not work ) probably I need an USB HUB and a keyboard. I can try as a test but is nothing i can use in real life
I also try to write remix OS on micro SD. Software inside the zip file was able to write the .img on micro SD but i couldn't boot from it
Still wrong section, its about jides own remix tablet
thanks
It's work thanks, but WiFi not work . :good:
williamfelician said:
It's work thanks, but WiFi not work . :good:
Click to expand...
Click to collapse
Who can help for us.
My wifi not work
Lenovo take care only about Windows.
I can't boot Remix OS 32-bit.
Asus Vivotab Note 8 it can.
I think people, who have 64-bit UEFI can boot Remix OS 32-bit.
Hi, are you able to boot remix os in lenovo thinpad tablet? after selecting the remix os using volume up and down keys are able to boot? if so how did you do that?
Hey guys,
On jan 2021 I've installed windows 10 cracked version in my hp laptop. Later than i got issue during use of dev apps. Now I want to switch back to official version of windows 10.
I've created windows 10 bootable usb from media creation tool. But I'm not able to boot it. I pressed F9 key and select usb on boot option than my pc stuck on hp logo in boot loop.
I also tried to reset but got an error (no recovery environment) also tried to advance startup got no reset option there. Please find the bios setting and error images as attachment.
Thanks for help in advance.
Nikhilll_mishra said:
Hey guys,
On jan 2021 I've installed windows 10 cracked version in my hp laptop. Later than i got issue during use of dev apps. Now I want to switch back to official version of windows 10.
I've created windows 10 bootable usb from media creation tool. But I'm not able to boot it. I pressed F9 key and select usb on boot option than my pc stuck on hp logo in boot loop.
I also tried to reset but got an error (no recovery environment) also tried to advance startup got no reset option there. Please find the bios setting and error images as attachment.
Thanks for help in advance.
Click to expand...
Click to collapse
i think you are using a bad program for making a bootable iso.the best program i think its rufus-1.3.4 for making a bootable iso win10 or win7 i will attached it here for you.i hope it will help.
just unzip the file and run the program after you insert your usb drive or sdcard
If the BIOS is well set and the flashable USB is ok (Rufus or Media Creation Tool -> follow online guides) turn poweron the notebook and by pressing F9 with the pendrive inserted select the last option "USB Hard Drive - SanDisk Cruzer Blade" than the Windows 10 logo should appear immediatly, and than the Win 10 installation menu.
Download the latest version of the BIOS and UEFI firmware on your PC, and unplug all the other USB drives connected to the device.
Will on windows, open pendrive and execute setup.exe. Check if start.
[GUIDE/TUTORIAL/HOWTO] Nvidia Shield Tablet K1 (shieldtablet) to Android 9 / LineageOS 16
This detailed step-by-step guide helps you transform your Nvidia Shield Tablet K1 tablet with Android 7 to a fresher one with Android 9.
### I'll make a few notes using this style: PLEASE READ THEM.
Before going further, make sure you have the correct model.
Go to Settings > About tablet > Model number: SHIELD Tablet K1
Make sure you have latest official updates.
Connect tab to Wi-Fi network.
Go to Settings > About tablet > System upgrade. Download if update is available.
See all my tutorials at https://github.com/djibe/Android-tutorials
CHANGELOG
v1. Initial release
1) DOWNLOAD
- djibe Shield pack: https://bit.ly/nvidiashielddjibepack
(contains USB drivers + fastboot & adb + TWRP 3.7 recovery + Magisk root).
Unzip pack on Windows desktop.
- ROM AOSPExtended Unofficial: https://forum.xda-developers.com/t/...ded-rom-v6-7-unofficial-shieldtablet.4063675/
Download latest build: https://androidfilehost.com/?w=files&flid=306219&sort_by=date&sort_dir=DESC
OR Android 8.1 / LineageOS 15 Unofficial: https://forum.xda-developers.com/t/...for-shield-tablet-omx-camera-working.4276915/
Download latest build: https://androidfilehost.com/?w=files&flid=325335&sort_by=date&sort_dir=DESC
And suitable Bitgapps package
+ BitGApps ARM 9 v1.8+: https://github.com/BiTGApps/BiTGApps-Release/releases/
+ Tablet must charged to 100%.
2) INSTALL WINDOWS DRIVERS AND BACKUP
Go to the folder you unzipped earlier.
navigate to SHIELD_Family_WHQL_USB_driver_201801 > SHIELD.
Right click on android_winusb.inf and select Install. Confirm with OK.
Restart Windows.
Make sure Google/provider account is synchronized.
Backup photos, documents, contacts before going any further (ex: use the backupyourmobile app).
Connect tab to PC and retrieve data.
3) UNLOCK BOOTLOADER OF NVIDIA SHIELD TABLET K1
In Android, go to Settings > About tablet.
Tap 7 times on "Build number", a notification confirms Developer menu is unlocked.
Go to Settings > Developer options and switch USB debugging ON.
Go to my /djibe folder you unziped earlier. In Windows address bar (ie E:\root\Nvidia Shield Tablet K1\djibe\flash), type cmd and hit Enter
to open a Windows Command.
Connect tablet to PC.
Enter command
Code:
adb devices
Command starts adb and returns
Code:
0424916025732008b275 unauthorized
ADB (Android Debug Bridge) has started but tab is waiting for authorization.
On tablet, authorize adb commands from Allow USB debugging dialog: tap on OK.
Then enter command
Code:
adb reboot bootloader
Tab restarts and displays nvboot screen.
Make sure [bootloader](version xxx) is 4.00.2016.04.
Go to Windows Device manager.
Check the Fastboot device > right click to update driver.
Select the manual installation and set SHIELD_Family_WHQL_USB_driver_201801 folder to install fastboot USB drivers.
Installation ends with Android Bootloader Interface.
You may have to unplug-replug tablet in USB.
Tablet should now be seen in Windows Device manager as Android Device > Android Bootloader Interface.
To test, back to Windows command, enter:
Code:
fastboot devices
Command returns
Code:
0424916025732008b275 fastboot
Enter command
Code:
fastboot oem unlock
Using Volume+, select Yes - Unlock bootloader, confirm by pressing Power.
Lowest message is now: LOCK STATE - unlocked
### Unable to run fastboot commands: < waiting for device > ? Go to Windows Device Manager
### While in ADB, driver for Android Device should be named Android Composite ADB Interface. In Fastboot: Android Bootloader Interface
### Click on View > Display hidden devices, right click on Nexus 7 > Uninstall. Reinstall drivers. No success ? Try from another computer
Use Volume keys to select Unlock bootloader and Power to confirm.
Tablet is unlocked.
Press Volume- to select Fastboot protocol and confirm with Power.
4) FLASH TWRP 3.7 RECOVERY
From Windows command, enter:
Code:
fastboot flash recovery twrp-3.7.0_9-0-shieldtablet.img
Command returns Finished. Total time: 0.995s
Back to tablet, use Volume keys to select Recovery mode, confirm with Power.
Wait during recovery boot.
Welcome to TWRP recovery.
Check Never show this screen during boot again and Swip to Allow Modifications.
Go straight to Backup > select Boot, System, Data partitions.
Swipe to Backup and wait during backup.
Back to home screen > Mount (tablet still connected to PC).
You can access tablet's storage folders from Windows Explorer if Data partition is checked and bottom right button show Disable MTP (within TWRP Mount menu).
From Windows Explorer, navigate to SHIELD Tablet > Internal Storage.
Copy TWRP folder and paste it somewhere safe on PC.
This is a perfect backup in case of crash.
5) FORMAT PARTITIONS
On tablet, now go to Wipe > Format data.
Type yes and confirm with bottom right check icon.
Now go to Wipe > Advanced Wipe. Select Dalvik / ART Cache, System, Cache, Data, Internal Storage and Swipe to Wipe.
We cannot flash on wiped partitions. Go to Reboot > Recovery and Swipe to Reboot.
6) FLASH ANDROID + GAPPS (+ MAGISK)
On restart, check Never show this screen during boot again and Swipe to Allow Modifications.
Connect tab to PC.
Back to Mount menu.
Copy ROM + GAPPS (+ Magisk) to Internal storage with Windows Explorer.
Go to TWRP Home > then Install.
Navigate to /data/media.
Select aosp-*.zip,
Add more zips > bitgapps*.zip
and Swipe to force install.
(For root, needed for Netflix : Reboot > Reboot to recovery then Install > Magisk.zip)
Android 9 is installed !
When done message prompts, tap on Wipe Cache/Dalvik and Swipe to Wipe.
Disconnect tab from PC.
Then Reboot System.
Let the tab start (a few minutes).
7) OPTIONAL: ROOT WITH MAGISK
### Only if you flashed Magisk via TWRP recovery
Configure Android as you like.
Magisk root starts with Android.
You can manage permissions and extra modules with Magisk Manager app.
10) OTHER APPS
- You can use GPS Status & Toolbox for faster GPS fix.
- Developer options
Settings > About tablet.
Tap 7 times on build number.
Back to Settings > Developer options
Set Windows animation scale, Transition animation scale and Animator duration scale to .5x
- Tablet not seen by Windows ?
Activate Developer options.
Go to Settings > System > Developer options > Default USB configuration > File transfer
That's it.
Enjoy ;-)
Thanks: @followmsi, @k23m, @nbehary, @DevSwift1, @flex1911, @yattodettaman, @emmett.tsai, TopJohnWu, TWRP team, LineageOS team, BitGApps team
------------------------------------------------------------------------------------------
BOOT TO RECOVERY
Hold Power + Volume- until Droid logo appears and release buttons, this is Bootloader.
Press Volume- twice to show Recovery mode and confirm with Power
I've done this, then struggled a bit to pass safetynet, finally was able to install netflix, but it stays on boot logo and after a while gives me error 501 172. How can I make netflix work?
tandero said:
I've done this, then struggled a bit to pass safetynet, finally was able to install netflix, but it stays on boot logo and after a while gives me error 501 172. How can I make netflix work?
Click to expand...
Click to collapse
Same here.
I need time to investigate.
tandero said:
I've done this, then struggled a bit to pass safetynet, finally was able to install netflix, but it stays on boot logo and after a while gives me error 501 172. How can I make netflix work?
Click to expand...
Click to collapse
I'm back,
this tutorial worked like a charm for me at this hour: https://www.droidwin.com/how-to-pass-safetynet-on-rooted-android-12/
But I did pass the safetynet earlier, it is just the application still gave me error 501, 172. I will try to include missing steps because some are the same as I performed and see if application will run.
tandero said:
But I did pass the safetynet earlier, it is just the application still gave me error 501, 172. I will try to include missing steps because some are the same as I performed and see if application will run.
Click to expand...
Click to collapse
What YASNAC app is writing ?
Added Netflix to Zygisk DenyList and cleared app data ?
yasnac:
basic integrity - pass
cts profile match - pass
evaluation type - basic
no, but just did and rebooted and still there is the same problem (i think, it is still on netflix logo, did not give an error yet), i will update this post soon
edit:
resulted in error 500 172 (https://help.netflix.com/en/node/125643)
tandero said:
yasnac:
basic integrity - pass
cts profile match - pass
evaluation type - basic
no, but just did and rebooted and still there is the same problem (i think, it is still on netflix logo, did not give an error yet), i will update this post soon
edit:
resulted in error 500 172 (https://help.netflix.com/en/node/125643)
Click to expand...
Click to collapse
Add Netflix to Zygisk DenyList (+ other services like in Droidwin post) and clear Netflix app data
Done that once again (cleared app data of netflix and google play store, google play servcies and google services framework).
Unfortunately right now it is stuck on logo, and did not give me the error yet. Which method have you used?
Rom works pretty good on my K1, much better/faster than stock. Battery drain is still there but is nowhere near as bad on a stock rom (I have a brand new battery installed).
For some reason the headphone jack is not compatible with this rom at all (plugging in headphones does nothing). Anyone else notice this?