Hello, I have a Tmobile Samsung S5 and I am able to get into Download Mode and I have used Odin v3.09 to try to and flash Odin Flashable Full Stock from the oldest version to the latest and everytime it just boots to the Samsung S5 logo screen with the words Recovery Booting on the top upper left of the phone. The phone is also unable to get into Recovery. I tried flashing other recovers such as TWRP via Odin but I get an error stating "recovery is not seandroid enforcing"
I am beating my head up against the wall here trying to get it to boot up.
Title was meant to say CAN'T
shanghei said:
Hello, I have a Tmobile Samsung S5 and I am able to get into Download Mode and I have used Odin v3.09 to try to and flash Odin Flashable Full Stock from the oldest version to the latest and everytime it just boots to the Samsung S5 logo screen with the words Recovery Booting on the top upper left of the phone. The phone is also unable to get into Recovery. I tried flashing other recovers such as TWRP via Odin but I get an error stating "recovery is not seandroid enforcing"
I am beating my head up against the wall here trying to get it to boot up.
Title was meant to say CAN'T
Click to expand...
Click to collapse
You might not be able to get into recovery mode but when you're soft bricked you can get into download mode.
Press the key combination to get into Download Mode and keep holding them until your phone gets to the Download Mode screen.
You'll then have to redo it and if it still doesn't work then you're probably flashing a bad firmware.
Your phone may reboot a few times during this process, as it's happened to me before and I just ended up holding until about 3 or 4 reboots.
I did flash in odin in download mode using the correct firmware. I also used kies to no avail.
shanghei said:
I did flash in odin in download mode using the correct firmware. I also used kies to no avail.
Click to expand...
Click to collapse
Make sure it's definitely the right firmware, and try using a different version of Odin perhaps?
CainK said:
Make sure it's definitely the right firmware, and try using a different version of Odin perhaps?
Click to expand...
Click to collapse
I used Odin Version 3.07 and 3.09 to flash the following firmware files, odin finishes with a green PASS!
It is a Tmobile S5 sm-g900t
G900TUVU1CNK2_G900TTMB1CNK2_G900TUVU1CNK2_HOME.tar.md5
Everytime its done flashing it goes to a screen that says on the top Left in blue text "recovery rebooting......." and it just sits there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Samsung sm-g900m nao entra em modo recovery .
I have the same problem.
my screen this loop. when I try the recovery appears the same message. When I try the way downloads is stuck in the robot android more not connect the USB
Related
Today i bought a used D802 32gb.The phone works,I can do anything except OTA update and root.
Stump root says that i'm already rooted,but can't update super su.Always fails.
I tried with LG flashtool to flash a kdz rom but i can't turn the phone into download mode.I tried a lot of times but all the time shows the cahrging screen.
Tried also factory reset but no luck.I can't root my phone.
No root,No OTA update,no download mode to update manually.Everything work fine except this and i'm stuck to 4.4.2.
Any solution?
Edit:Tried to root it with kingroot and i have root access,download flashify and flash TWRP.But i can't enter into recovery mode.
I have this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit 2:Now my phone is dead.I can see only this image.Don't boot after i install autorec and flash TWRP...
Mine is
[920]Secure Booting Error
[970]cause: Boot certification verify
panosfx said:
Today i bought a used D802 32gb.The phone works,I can do anything except OTA update and root.
Stump root says that i'm already rooted,but can't update super su.Always fails.
I tried with LG flashtool to flash a kdz rom but i can't turn the phone into download mode.I tried a lot of times but all the time shows the cahrging screen.
Tried also factory reset but no luck.I can't root my phone.
No root,No OTA update,no download mode to update manually.Everything work fine except this and i'm stuck to 4.4.2.
Any solution?
Edit:Tried to root it with kingroot and i have root access,download flashify and flash TWRP.But i can't enter into recovery mode.
I have this screen
Edit 2:Now my phone is dead.I can see only this image.Don't boot after i install autorec and flash TWRP...
Mine is
[920]Secure Booting Error
[970]cause: Boot certification verify
Click to expand...
Click to collapse
you cant enter download mode? if not have you tried skr tools? or the thread no download no recovery..
click on my signature where it says HERE and find you problem in guides and fixes
Srk tools solved my problem!
Thank you very much sir!
[Q] Galaxy Grand 2 Duos G-7102 doesn't want to boot "Could not do normal boot", HELP!
Hi , i'm new in this forum, and i hope you guys could help me on getting out of this problem:
I have a Galaxy Grand 2 Duos, and i cannot boot it anymore. When i turn it on, it appears the boot logo for like 4 seconds and suddenly it turns in ODIN Mode with an error saying : "Could not do normal Boot": !
here is it a screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The problem occured when i tried for the 4 times to flash a Stock Rom, (and they didnt work as well, it stucks in a bootloop), and then i tried to flash a custom one. Now even if i flash a Stock ROM the problem stucks, and i cannot turn it to Recovery mode also!
I tried to flash a CWM/ TWRP, but Nothing at all. I also tried a Stock recovery, and it seems like they dont pass at all to the phone, because , although the green "pass" that i get in ODIN 3.09, the download process seemed going too fast for a normal recovery.img flash!
Thank you, and help me i'm going mad with this phone!
flash stock firmware
SoUnd001 said:
flash stock firmware
Click to expand...
Click to collapse
I did it, but nothing! i just think the problem is in the recovery.img, but i cant figure oute how solve it.
flash a custom recovery...tick the auto reebot on in odin
stanlyptpm007 said:
flash a custom recovery...tick the auto reebot on in odin
Click to expand...
Click to collapse
Nothing, i tried it and Now it stucks on Recovery Booting screen,
I'm beggining to think it's a wrong recovery.imgh..
is there a program that downloads you the stock ROM suitible for my device, automatically? (maybe i did the wrong choice of firmware)
I think the bootloade is the problem
Flash stock firmware in odin options select phone bootloader update
Edited
______________________________________________________
Tried with odin
cant find any IMG or any ZIP after selecting AP in browsing
_____________________________________________________
hello
mine is s7 edge model (SM-G935FD) indian variant
with latest security patch i,e (1 dec 2017)
is it the same procedure ?
kinda scared to try old might end up bricking up my phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
beinglazy said:
Edited
______________________________________________________
Tried with odin
cant find any IMG or any ZIP after selecting AP in browsing
_____________________________________________________
hello
mine is s7 edge model (SM-G935FD) indian variant
with latest security patch i,e (1 dec 2017)
is it the same procedure ?
kinda scared to try old might end up bricking up my phone View attachment 4386430
Click to expand...
Click to collapse
With AP you need to flash .tar or .tar.md5 files
Same procedure to root as long as your root method hasn't been noted as being outdated
turbolukex5 said:
With AP you need to flash .tar or .tar.md5 files
Same procedure to root as long as your root method hasn't been noted as being outdated
Click to expand...
Click to collapse
i tried this method didnt work
https://www.youtube.com/watchv=GRRX...5rshb2ieiej5kbhq4l5pw03c010c.1515693111002897
twrp = https://dl.twrp.me/hero2lte/twrp-3.2.1-1-hero2lte.img.tar.html
odin says "<OSM> All threads completed. (succeed 1 / failed 0)"
and after auto reboot in lock screen it asked me to reset the device but i didnt
but when it try to go in recovery by prssing vol up+ home + power
it goes to something saying "Installing update" and after few seconds says " no command" and it goes to stock recovery
beinglazy said:
i tried this method didnt work
https://www.youtube.com/watchv=GRRX...5rshb2ieiej5kbhq4l5pw03c010c.1515693111002897
twrp = https://dl.twrp.me/hero2lte/twrp-3.2.1-1-hero2lte.img.tar.html
odin says "<OSM> All threads completed. (succeed 1 / failed 0)"
and after auto reboot in lock screen it asked me to reset the device but i didnt
but when it try to go in recovery by prssing vol up+ home + power
it goes to something saying "Installing update" and after few seconds says " no command" and it goes to stock recovery
Click to expand...
Click to collapse
Follow tutorial in this thread instead
https://www.google.co.uk/amp/s/foru...-official-twrp-hero2lte-3-0-0-0-t3334084/amp/
I'm having the same problem, i've tried all methods I can find including the ones suggested on here but not one will work
Bholwell said:
I'm having the same problem, i've tried all methods I can find including the ones suggested on here but not one will work
Click to expand...
Click to collapse
hey this method worked for me
https://forum.xda-developers.com/showpost.php?p=75169863&postcount=2139
Hi guys,
I got back this Samsung galaxy j5 from a firend, and i dont know what to do with, i cant acces recovery, its fully blocked in this stage:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help?
Can you force a reboot with Vol+ & Vol- & Power? Then Vol- & Home & Power should open download mode. From here you should be able to use Smart Switch for a firmware update.
Somehow i whas able to boot in download mode. My Smart switch writes Unsuported device. And i can-t get to work
Get stock firmware from sammobile and flash it via odin
Odin not leting... No pit binary, and flash read error
battlepower said:
Odin not leting... No pit binary, and flash read error
Click to expand...
Click to collapse
Pm me with your telegram id
I sent the pm
Any ideas what can i do with this phone ?
Look for a pit file and flash it with Odin. Tab "PIT", load the PIT file; tab "Options": [x] Re-partition; [x] F. Reset Time.
Reboot into download mode and restart Odin to flash the most recent firmware again (BL, AP, CP & CSC).
If this does not help you may need to replace the main board.
I've attached the PIT file pulled from my SM-J500F. In case if you haven't got hold of one, you may insert the below file(after extracting) in PIT option on Odin. Hopes this will work!
Install an older version of smart switch, they disabled the reinstall option
It worked for me when my phone didnt even show that screen.
You can also try reinstalling the missing parts throw odin, like the previous coment said
I get this after trying to flash the pit
So all the same, if i try another pit the same proble. I instaled old version of smart switch and i wrote the model and the imei, and says try again.
battlepower said:
I get this after trying to flash the pit
Click to expand...
Click to collapse
Sent from my Samsung Galaxy J5 using XDA Labs
So, first of all
I'll state everything that have happened so far.
First, I got a phone with a sm-g935fd model carrier locked (smart from ph). then i decided to have it unlocked after reading and following the thread "Honestly free Sim unlock". I followed the instructions specifically to flash the combination firmware G935FXXU2ARA1 and have it unlocked and it succeeded. then now that i already have it open lined, i decided to proceed and flash the latest stock firmware from my country specifically the 1/31/18 release G935FXXS2DRAB for PHilippines OPEN LINE.
First thing i did when i'm still in the combi firmware was to activate developer options and turn on usb debugging. i also had hoped to turn on OEM unlock but the option wasn't there. Still, i proceeded flashing it via Odin v3.13.1 but ended up failing right after cache.img showed up. after failing, i reflashed to the combination firm (i do this everytime i fail, sort of like my way to recover to a working firm). I tried to seek help and after listening to advices, i tried these: first, i tried flashing the same latest stock but this time using a pit file i extracted from that very stock firm. Still, it failed at cache.img. too. I then tried to flash the same latest stock firm but this time, i modified the csc by extracting its contents and recompressing them all except cache.img to a tar file using 7.zip. I then proceeded to flash this stock firmware while using the csc.tar file without cache.img in it. Still, it ended up failing but this time after hidden.img.
After this, i have thought to flash it the same way as the most recent flash(csc without cache.img) but this time using the pit file again from this latest stock but i ended up hesitating and deciding to research things first before proceeding. After skimming through forums, i've read frp lock issues but when i'm doing all the flashing i've stated above, in the download mode it says FRP LOCK: OFF. I then also tried to flash other firmwares specifically the first released 6.0.1 stock firm (smart carrier) and the latest stock firmware 7.0 1/31/18 (smart carrier).
The first one truly send chills down my spines since i ended up having a bootloader exception and i can't access download mode. but after researching a bit, i pressed and sometimes hold the home button in desperation and when the logo appeared i used the combo buttons for download mode then managed to reflash the combi firm. I then learned that i shouldve followed the warning of not flashing a lower numbered bootloader. then after that, i tried the latest stock firm from smart(the carrier i was locked first) Still, it ended up failing at cache.img. As of now, I feel like a bit hopeless since the only stock firmwares for my country that might work are the latest stock firmwares since they are the only ones having 2xxxx bootloader.
I just can't seem to flash an original firmware from this combination firm. Could anyone possibly offer me some advice?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had the same issue as you, with this exact combination binary. I couldn't get any other stock firmware and I got the same bootloader exception where I freaked out. No other combination binary seemed to work. So I decided to try the latest XSA Stock for Australia and it worked. So I recommend that you try that. But I still can't boot down or anything else. No other combination I have run into works. Hope this helps you out.