Related
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
astraopcuser said:
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
Click to expand...
Click to collapse
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
King Canute said:
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
Click to expand...
Click to collapse
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
astraopcuser said:
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
Click to expand...
Click to collapse
Do I have to root the phone to make the clockworkmod work?
King Canute said:
Do I have to root the phone to make the clockworkmod work?
Click to expand...
Click to collapse
you must first root your phone.:good:
---------- Post added at 10:54 PM ---------- Previous post was at 10:36 PM ----------
astraopcuser said:
you must first root your phone.:good:
Click to expand...
Click to collapse
for the gti 9505 lte is a little bit diverent at this time.
first flash the cf autorootjflte.... via odin. phone in downloadmode, select pda,select cf autoroot jfte... hit start. phone reboots, you see an red/orange android droid then its rebooting
after that turn off your phone . phone in downloadmode, open odin, select pda, select cwm 6.0.3.2-4, hit start
Your phone is rooted with cwm.
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
How rubbish..... its goes that way to get a custom cwm on the gti9505.
He ask cwm, not philz recovery.
You can say next time ....theres another way to get it work.
I only trying to help
Verstuurd van mijn GT-I9505 met Tapatalk
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
I'm 100% sure that my phone is a 9505, it's the only version sold in Norway.
Mittaa said:
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Click to expand...
Click to collapse
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
King Canute said:
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
Click to expand...
Click to collapse
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Mittaa said:
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
Click to expand...
Click to collapse
I'm using an Samsung retail cable from the S2, but I did try with the S4 retail cable aswell, but still no luck. The flashing goes ok in Odin, so I doubt the cable is the problem. And Kies isn't running in the background at all. Even changed USB port just to be sure testing all the options.
samersh72 said:
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Click to expand...
Click to collapse
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
King Canute said:
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
Click to expand...
Click to collapse
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
samersh72 said:
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
Click to expand...
Click to collapse
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
King Canute said:
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
Click to expand...
Click to collapse
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
I was thinking about installing Cyanogenmod ROM or maybe later Google Android 4.3.
So now I need to root the phone.
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
Triangle Away wan't work if you have custom kernel OR recovery !
Mittaa said:
Triangle Away wan't work if you have custom kernel OR recovery !
Click to expand...
Click to collapse
yes i know and he supposed to read or already red TA thread to know that
Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.
TenshiSenpai said:
Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.
Click to expand...
Click to collapse
Can you please link the guide you have followed?
What black edition version do you have? I9500 or I9505, i understand there are 2 versions depending on region.
Is the bootloader unlocked?
What version Odin are you using?
Remember to reboot into recovery by holding volume up while turning power on after flashing.
Holding volume down gives you download mode.
Did you put the recovery package in the PDA tab?
I use odin 3.07 and used the guide of philz. I tryed with auto reboot and without auto reboot on odin, i put the tar.md5 file on pda without anything else. The only other option ticked was f.reset time.
Sent from my GT-I9505 using XDA Free mobile app
Bump
Noone knows anything? Please help, I can't do anything with the phone in this state. I can't install the official firmware nor the recovery too.
Uncheck auto-reboot in Odin.
if problem persists:
Different usb cable
Different usb port
Make sure Kies is not running in the background.
Already done all that stuff,
Any other suggestions?
TenshiSenpai said:
Already done all that stuff,
Any other suggestions?
Click to expand...
Click to collapse
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/
MAX 404 said:
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/
Click to expand...
Click to collapse
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.
TenshiSenpai said:
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.
Click to expand...
Click to collapse
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09
MAX 404 said:
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09
Click to expand...
Click to collapse
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu
TenshiSenpai said:
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu
Click to expand...
Click to collapse
Remember to release the 3 button combination after the samsung logo shows up
MAX 404 said:
Remember to release the 3 button combination after the samsung logo shows up
Click to expand...
Click to collapse
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?
TenshiSenpai said:
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?
Click to expand...
Click to collapse
Glad is working
Yes you can make a nandroid , go to backup and restore choose your backup destination ( recommend external SD)
all.
I have an i9505 on 3 UK that has been rooted for over 6 months. I've been running the excellent TW based Echo Rom but wanted to try an ASOP rom but quickly wanted to revert.
I tried to restore my Nandroid but this failed and screwed up the phone (dont ask)so back to ODIN and i flashed back to stock 4.4.2 firmware for the UK via Sammobile (NG8)
Now back to square 1 so attempted to reroot with CF Autoroot again via ODIN. all show pass and i get the black screen on the phone with the red android logo and line stating stock recovery restored. I then used ODIN to flash Philz recovery again shown as Pass, however when i try to get into recovery i get some small white text on the bkack background that is there too briefly to read before the phone reboots as normal.
The Su superuser app is there but states the Su binary is outdated and the phone has no root access.
Ive read a few methods to get round this but they all seem to follow the same process ive tried a few times now.
The Rom for Echoe is auto root so id have thought if i could get to recovery somehow i could just flash this ?
Any one any views or have i screwed up for good ? .
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Lennyz1988 said:
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Click to expand...
Click to collapse
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
robinta said:
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
Click to expand...
Click to collapse
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Lennyz1988 said:
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Click to expand...
Click to collapse
GTI9505...(Bootloader i9505xxegng8)
Originally I tried philz_touch_5.15.8-i9505.tar.md5
and then updated to philz_touch_6.23.9-i9505.tar.md5 with no avail.
Try redownloading it. If you say that if passes, then it should just work.
If it still fails then try TWRP. Uncheck auto-reboot before flashing.
Could it be connected to me flashing a generic unlocked UK firmware on a 3 UK handset ?
That's sorted it ! Flashed CWM recovery and am now running Echoes v28.
Thanks for the help. I was really panicking for a while.
I wont be changing roms for a while but I guess if I did I won't lose root ?
Hi all.
I have big problems with a Galaxy S4 (GT-I9505).
A friend gave it to me becouse it doesnt start anymore. He was licen to Musik whan the screen turn black and the phone doesnt start anymore.
So it stucks at Bootscreen. I can start Odin mode and i tryied to flash CWM and TW Recovery. Also i tried to flash original Rom from Sammobile.
Odin passes with the recoveries but it doesnt work. The rom failed.
I got a error message when i try to start recovery mode.
Recovery Booting
Recovery is not seandroid enforcing
Set Warranty Bit: recovery
I cant get into fastboot mode. The informations in the Internet are that there is no fastbootmode for the gt-i9505.
Is there anybody who can help me? And sorry for my bad english
ScO_oT said:
Hi all.
I have big problems with a Galaxy S4 (GT-I9505).
A friend gave it to me becouse it doesnt start anymore. He was licen to Musik whan the screen turn black and the phone doesnt start anymore.
So it stucks at Bootscreen. I can start Odin mode and i tryied to flash CWM and TW Recovery. Also i tried to flash original Rom from Sammobile.
Odin passes with the recoveries but it doesnt work. The rom failed.
I got a error message when i try to start recovery mode.
Recovery Booting
Recovery is not seandroid enforcing
Set Warranty Bit: recovery
I cant get into fastboot mode. The informations in the Internet are that there is no fastbootmode for the gt-i9505.
Is there anybody who can help me? And sorry for my bad english
Click to expand...
Click to collapse
Hi mate,
Some more information would be nice.
Which was the latest firmware and which version did you want to flash?
http://forum.xda-developers.com/showthread.php?t=2265477
Take a look at this, especially to the "Odin troubleshooting" part.
Sent from my Galaxy S4 using Tapatalk
DarkerTimes said:
Hi mate,
Some more information would be nice.
Which was the latest firmware and which version did you want to flash?
http://forum.xda-developers.com/showthread.php?t=2265477
Take a look at this, especially to the "Odin troubleshooting" part.
Sent from my Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
Hey. Thank you for the answere.
I tried to flash I9505XXUGNF6_I9505DREGNF2_I9505XXUGNF6_HOME.tar
The latest firmware was 4.2.2 (Austria 3)
I tried now another Odin version and i flashed it with PID file. The only result is that i get a recovery booting
in the top left corner but it still stucks... i cannot open recovery to wipe cache / factory reset.
The last thing i tried was to flash the original recovery. <- back to the 3 errors.
now i try another odin software with another usb port. odin passes with everything but i cannot open recovery. just stuck at Recovery Booting
ScO_oT said:
Hey. Thank you for the answere.
I tried to flash I9505XXUGNF6_I9505DREGNF2_I9505XXUGNF6_HOME.tar
The latest firmware was 4.2.2 (Austria 3)
I tried now another Odin version and i flashed it with PID file. The only result is that i get a recovery booting
in the top left corner but it still stucks... i cannot open recovery to wipe cache / factory reset.
The last thing i tried was to flash the original recovery. <- back to the 3 errors.
now i try another odin software with another usb port. odin passes with everything but i cannot open recovery. just stuck at Recovery Booting
Click to expand...
Click to collapse
Hi,
does Odin give a fail log? Or does it finish successfully?
Which Odin versions did you try?
And the firmware you want to flash now is a Austria 3 one as well? You can also take another version (but still with the same csc) in case that your current one is damaged or something like this.
Sent from my Galaxy S4 using Tapatalk
DarkerTimes said:
Hi,
does Odin give a fail log? Or does it finish successfully?
Which Odin versions did you try?
And the firmware you want to flash now is a Austria 3 one as well? You can also take another version (but still with the same csc) in case that your current one is damaged or something like this.
Sent from my Galaxy S4 using Tapatalk
Click to expand...
Click to collapse
Hi again.
I used Odin 3.04 and 1.85. Also i tried diffrent USB Ports.
I tried to flash CWM 6.0.4.7 Touch and Non Touch, also twrp.
It passes with all the recoverys as well with the rom from sammobile and the stock recovery rom from the other tread.
i tried with and without pit file. Odin passes everytime.
Afther restarting the phone i just get the blue (booting recovery) or the 3 error messages in the top left corner and it stucks for hours.
Iam not able to boot recovery and wipe the cache... and iam not able to boot into the system do something else.
the only thing working is the download mode.
iam out of ideas.
ScO_oT said:
Hi again.
I used Odin 3.04 and 1.85. Also i tried diffrent USB Ports.
I tried to flash CWM 6.0.4.7 Touch and Non Touch, also twrp.
It passes with all the recoverys as well with the rom from sammobile and the stock recovery rom from the other tread.
i tried with and without pit file. Odin passes everytime.
Afther restarting the phone i just get the blue (booting recovery) or the 3 error messages in the top left corner and it stucks for hours.
Iam not able to boot recovery and wipe the cache... and iam not able to boot into the system do something else.
the only thing working is the download mode.
iam out of ideas.
Click to expand...
Click to collapse
You can try to flash a three or four part firmware with Odin 3.09, it will wipe your device itselfs
Sent from my Galaxy S4 using Tapatalk
Try flashing the recovery again with auto-reboot unchecked.
But it sounds more like a hardware failure to me.
Thank you all for your help.
And yes. It was a Hardware failure.
Hi i need help with twrp from mygalaxya. When i do ap on odin and i select the twrp it says "md5 error binary is invalid" why?
gigxmark said:
Hi i need help with twrp from mygalaxya. When i do ap on odin and i select the twrp it says "md5 error binary is invalid" why?
Click to expand...
Click to collapse
perhaps the file is corrupted,i have had the same issue and dl another file and it's ok
try this onehttps://www.androidfilehost.com/?w=file-thanks&fid=24269982086992212&mid=97&download_id=rvfmtpn30ij5btnu0g3hc0r2a6&tid=1473694567&hc=1d0c9de416ddc45365e45fce7c9b29580ae899c13d7cfd7573a36a07
dabenaute said:
perhaps the file is corrupted,i have had the same issue and dl another file and it's ok
try this onehttps://www.androidfilehost.com/?w=...dc45365e45fce7c9b29580ae899c13d7cfd7573a36a07
Click to expand...
Click to collapse
Thanks man
gigxmark said:
Thanks man
Click to expand...
Click to collapse
my pleasure
dabenaute said:
my pleasure
Click to expand...
Click to collapse
man i ve just flash the twrp with odin but when i reboot in recovery there is the stock recovery why?
i ve reflash and nothing but the phone boot up normally
gigxmark said:
man i ve just flash the twrp with odin but when i reboot in recovery there is the stock recovery why?
i ve reflash and nothing but the phone boot up normally
Click to expand...
Click to collapse
Stock recovery has a defense mechanism to reflash it back.
You need to untick Auto-Reboot in Odin.
That being said, the phone wont just leave download mode, you have to do it yourself with Volume Down + Power for like 10 seconds (it will power off, so release your fingers when it's off ). This is a life saver for phones that dont have a removable battery.
Ah ok thanks i will try
PlutoDelic said:
Stock recovery has a defense mechanism to reflash it back.
You need to untick Auto-Reboot in Odin.
That being said, the phone wont just leave download mode, you have to do it yourself with Volume Down + Power for like 10 seconds (it will power off, so release your fingers when it's off ). This is a life saver for phones that dont have a removable battery.
Click to expand...
Click to collapse
i tryed as you tell me but nothing
Is Odin reporting the flash successful? Does it PASS in the end?
Also, are you restarting the download mode after the flashes fail?
It's pointless to retry a flash if it fails in a single session at Download Mode, after the first flash, the phone and odin communication behave weirdly.
PlutoDelic said:
Is Odin reporting the flash successful? Does it PASS in the end?
Also, are you restarting the download mode after the flashes fail?
It's pointless to retry a flash if it fails in a single session at Download Mode, after the first flash, the phone and odin communication behave weirdly.
Click to expand...
Click to collapse
Odin report that the flash is successfull
So?
can you try a different TWRP, the 2.8.x one?
PlutoDelic said:
can you try a different TWRP, the 2.8.x one?
Click to expand...
Click to collapse
Wich? I flash the 2.8.7 of mygalaxya
Just change to a different one, if you tried 2.8, try 3.0 this time.
PlutoDelic said:
Just change to a different one, if you tried 2.8, try 3.0 this time.
Click to expand...
Click to collapse
But the 3.0 is for flashing on flashify and i don t have the root because i have a marshmallow bootloader and i must flash before the twrp and next i flash the supersu zip and this twrp is adapt dor my A5 and i don t know what will happen if i flash another twrp as you say the 3.0
http://forum.xda-developers.com/sam...overy-samsung-galaxy-a52015-sm-a500f-t3360802
That is not what i am reading. You can flash it through Odin, as it says on the instructions.
PlutoDelic said:
http://forum.xda-developers.com/sam...overy-samsung-galaxy-a52015-sm-a500f-t3360802
That is not what i am reading. You can flash it through Odin, as it says on the instructions.
Click to expand...
Click to collapse
Yes because i flash another twrp i will try with this tomorrow and i will tell here if works and thanks again
PlutoDelic said:
http://forum.xda-developers.com/sam...overy-samsung-galaxy-a52015-sm-a500f-t3360802
That is not what i am reading. You can flash it through Odin, as it says on the instructions.
Click to expand...
Click to collapse
i resolved the problem now i flashed the twrp and did the root thanks a lot
Man why i didn't have the root if i flashed the supersu zip? supersu says that i am not on root how to do?