Database Users

giving up

i guess im going to call verizon with a bs reason i need a new phone. I have tried to update off nan from when i first rooted downloads but wont install dont understand sbfing and zip files wont load need serious help

What exactly is your phone doing right now? Is it stuck on the boot logo or what?

Its operational, I just flashed back to first nan and reloaded fission cause nothing I did the 928 back to stock ect worked, even tried updating without signing into google, unrooted and all that just frustrated it won't work
Sent from my DROIDX using XDA App

Ok, so you are up and running then. The only thing i was going to suggest is flashing SBF to get you back to Stock Android 2.2 and starting the process over again. I had a similar problem and wiped everything clean IOT get what i wanted. SBF'ing is simpler then you think, all you need is 2 files (rsdlite_4.8 and VRZ MB810_2.3.15 sbf). There's lots of articles here on it and I used them when I thought I bricked my phone. I started all over and was able to receive my 2.2.1 update.....finally!!

have you done the ota update? if so use 2.3.32.sbf you can get it by google and search droid x 2.3.32 sbf and its the first result. and dl rdlite 4.8. very easy to flash. several guides on here as stated.

I got it my drivers are up to date but won't find my phone.. And I'm leary all I got to do is that file and update?
Sent from my DROIDX using XDA App

Try running rsdlite as the administrator. (Right click rsdlite)

Now won't find it and I got a toshiba, only a little bit over a year old
Sent from my DROIDX using XDA App
EDIT - finally got rsd lite to recognize but first attempt failed trying again... pray
EDIT #2 - YEs, rebooted with 2.3.320 now to find 2.3.340 n flash it

Bricked? SBF from GB .576 to Froyo .340. HELP!!!!

So I tried to SBF back to 2.3.340 like I done before and now I get stocked on the red M logo. When I try to go into recovery I only get to the exclamation point and pressing the search button doesn't do anything!!
What can I do?
Help please. I don't see an answer on the forums
Thanks
UPDATE: I had the system-only SBF. Found the SBF full and it worked.
Now try to figure how to install the zip files because my phone is not letting me

Venc said:
So I tried to SBF back to 2.3.340 like I done before and now I get stocked on the red M logo. When I try to go into recovery I only get to the exclamation point and pressing the search button doesn't do anything!!
What can I do?
Help please. I don't see an answer on the forums
Thanks
Click to expand...
Click to collapse
It sounds like you did the "system only" sbf.. Make sure it's the full sbf
Sent from my DROIDX using XDA App

bigshotrob22 said:
It sounds like you did the "system only" sbf.. Make sure it's the full sbf
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Hey,
Is it even out? I don't see it online
EDIT: I think I found the full SBF. I'll try it. Thanks
UPDATE: bigshotrob22 you are awesome!! Thank you it worked!!! Now I have to cancel my order for the replacement LOL

That happened to me. I SBF'd back to .340 and still had the Red M logo from the Gingerbread .595.
I was unable to get into recovery at all. I eneded up not having the phone for the day and did the SBF again when I got home, you can still access the bootloader, just not recovery (or atleast I was able to) to do the SBF back to .340.
You said you have done the SBF before..my issue with was I did not go into the factory recovery FIRST and wipe all data. I have since done three SBF's and wipe data (in stock recovery, not BOOT STRAP) first. I wiped data, DID NOT REBOOT device. Powered off, and went straight into the bootloader to SBF.
That seems to work for me now.
If it is the samething that happened to me...the wipe did not completely do its job. I make it a habit to wipe 3-4 times before doing anything.

try pushing the volume button up& down at the same time instead of search
Sent from my DROIDX using XDA App

[Q] I'm stuck - Bootloader Err after SBF

Background:
I've rooted then unrooted my Droid X in the past. Today I tried to install the OTA Gingerbread update. After the download and the reboot the Droid X booted into Clockwork Recovery (as has been normal recently). After selecting reboot, the phone reboots and tells me the update has failed.
I attempted to SBF using this guide: droidforums dot net/forum/droid-x-hacks/99958-rooolers-guide-root-backup-roms-2-2-ota.html#3.
The file I used was: VRZ_MB810_2.3.15_1FF_01.sbf.
Now:
I have the following on my screen (black).
Bootloader
30.04
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
Connect USB
Data Cable
I searched and found that I needed to use a 2.3.34 SBF, so I found this: SHADO_X6_2.3.34_SYSTEM-ONLY.sbf.
After SBFing with the new SBF I have the same result.
I'm stuck, I'm short on time, any help would be appreciated.
Thanks!

pvliii said:
Background:
I've rooted then unrooted my Droid X in the past. Today I tried to install the OTA Gingerbread update. After the download and the reboot the Droid X booted into Clockwork Recovery (as has been normal recently). After selecting reboot, the phone reboots and tells me the update has failed.
I attempted to SBF using this guide: droidforums dot net/forum/droid-x-hacks/99958-rooolers-guide-root-backup-roms-2-2-ota.html#3.
The file I used was: VRZ_MB810_2.3.15_1FF_01.sbf.
Now:
I have the following on my screen (black).
Bootloader
30.04
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
Connect USB
Data Cable
I searched and found that I needed to use a 2.3.34 SBF, so I found this: SHADO_X6_2.3.34_SYSTEM-ONLY.sbf.
After SBFing with the new SBF I have the same result.
I'm stuck, I'm short on time, any help would be appreciated.
Thanks!
Click to expand...
Click to collapse
You need the full sbf.
Sent from my DROIDX using XDA App

You needed to use VRZ_MB810_2.3.34_1FF_01.zip. you can try that, if it doesn't work you might have completely bricked it.
Sent from my DROIDX using XDA App

Same thing happened to me this morning, but different ERR numbers. Verizon & Motorola were no help. Took it to the Verizon store, they forced Froyo 2.2 back on the phone. Its working now, but keeps trying to update. I am waiting until I get home to back up everything, then I will wipe the phone and let it update on its own. Seems to be a bootloader issue with either Bootstrap or rooting.
Sent from my DROIDX using XDA App

If I'm on GB my phone ALWAYS gives me a "code corrupt" after running the 2.3.340 full SBF. A system SBF afterwards always fixes the issue. Weirdly, I can't just do the system SBF. Its like I have to brick the phone with the full SBF and then repair it with the system SBF.

ashish8 said:
You needed to use VRZ_MB810_2.3.34_1FF_01.zip. you can try that, if it doesn't work you might have completely bricked it.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I'm running VRZ_MB810_2.3.34_1FF_01.sbf now. I'll post back with my results.
Thanks everyone for the input so far.

After flashing with VRZ_MB810_2.3.34_1FF_01.sbf it looks like we're back in business. Everything looks the way it was before I started all this.
I'll try updating to GB now and report back.

ashish8 said:
If I'm on GB my phone ALWAYS gives me a "code corrupt" after running the 2.3.340 full SBF. A system SBF afterwards always fixes the issue. Weirdly, I can't just do the system SBF. Its like I have to brick the phone with the full SBF and then repair it with the system SBF.
Click to expand...
Click to collapse
You should probably download the file again

Briked my phone?

I think i bricked my Droid X. i was running Rubix Focused and tryed to flash GingerAle 3.0 and now it just sits at the moto "M" logo. i can get into the recovery by pulling the battery but even after a wipe and a recovery it still just sits. did i brick it, and if so how can i fix it? please help, reletivly new to flashing roms.
P.S. I'll love you forever if i can fix it =)

now i think i really did it. I tried running a recovery image from a few days ago and now i cant get back into the recovery menu...

Sounds Like SBF Time
Sounds like SBF is going to be your friend here, if you don't know how, head to
http://forum.xda-developers.com/showpost.php?p=11118819&postcount=2
and look for "SBF: What is it, and what does it do?!?"

OK, so i SBFed the phone, got all the way through it, got to the phone is rebooting and it just sits at the Moto "M" again. did i SBF wrong or what?
EDIT: I can get into the stock recovery... sort of. i can get to the ! with the droid next to it but nothing happens when i push the search button.

hmm, I know GB doesnt use the search button to pass that, try using vol UP+DOWN at the same time. perhaps the stock recovery isn't modified from SBF?

Woot that worked. got into recovery. wiped data and tryed a reboot, got stuck at logo again. should i try flashing back to the Rubix focused i had before?
Edit: it now boots into <3e> recovery and i get the e: signature verification failed instillation aborted when i try to install Rubix or Gingerale.

You can't install a custom roms from stock recovery
Sent from my DROIDX using XDA Premium App

try doing a full wipe data/cache a couple of times. that usually works for me
Sent from my DROIDX using the XDA mobile application powered by Tapatalk

YAY
Fixed it!!! yay!! I had to flash the full SBF file, not just the system one. thanks for the help guys

thats ur best bet. full sbf
Sent from my DROIDX using the XDA mobile application powered by Tapatalk

Milestone X Baseband Help

I have C Spire's Milestone X (2.3.5), tried to flash Cyanogen's nightly and failed.
Couldn't use the C Spire SHADO_X6_3.2.6_SHADOW_BP_C_02.06.00R_AP_BP_Flex_21_signed_secure_cell_south_1ff_P3_USERBLD.sbf.zip (recovery errors), so I used the Alltel one.
Great, now my phone thinks it's with Verizon wireless.
*228.. "Welcome to Verizon wireless...."
Help?

I would find the stock sbf for ur milestone x and reflash.
I had to use ur milestone x sbf to get by 621.
Sent from my DROIDX using xda premium running ics 4.0.4 after taking the 621 update.

I can't downgrade from 2.3.5 which I'm assuming is what the .sbf I posted is.
I get bootloader errors. I even tried installing the 2.3.5 OTA patch but it doesn't work either. I get recovery errors.

Hence, my orig reply to flash ur latest sbf. That will get you back to a good starting point with all operational. Then test again. I always have my current sbf before root and flash.....preventative measures rule
Sent from my DROIDX using xda premium

Can't find one. I can't boot into CWM now either.. it just boots into reg. recovery. -sigh-

Looking around at your 2.3.5 milestone x device.
I notice alot of people bricking using your sbf file.
Sounds like there are issues from it and you cant install the update because of it.
First if you tried to update and it still failed, well my resolution.
Boot up in linux maybe ubuntu live to be safe
hook up your phone power on holding home+Vol down+power
should say usb at the bottom
Then run terminal
chmod +x sbf_flash
sbf_flash "your original sbf file to put to your carriers stock rom"
Unplug usb and reboot phone.
Why dont you try looking here for your original or current stock sbf file
Code:
http://sites.google.com/site/motosbf/milestone-x-sbf-files