Hi to all. I have this g900f with boot error problem. I have search and i find a tutorial, it tell about t-flash card(with pit and BL) prepared with another working g900f. I have 2 phone , 1 dead and 1 working. If i prepare the t-flas card with odin , the working g900f will be knox warantee void 0x1? Or not? I have link to this tutorial, but i don't know if isn't allowed in this forum...
PROBLEM FIXED. PLEASE CLOSE THE THREAD
Related
Hello guys,
i'm from germany and have big troubles with my Samsung Galaxy S4 GT-I9505G...
I have flashed the Google 4.3 edition on it. Some days later the trouble has begin.
If i startet apps like camera or mozilla it shutdown.
So i have tried to flash the original firmware with Odin.
The device started but than it is in the Bootloop, i have tried to flash with the 4 parts (bootloader,csc,phone,pit...)
but there is only an error. When I tried the 1 Part Versions there is also the Bootloop.
-> I used the Firmware Downloads from Handy-faq.de
I hope you can help me, i need my Phone xD
Tanks!
Morgotov said:
Hello guys,
i'm from germany and have big troubles with my Samsung Galaxy S4 GT-I9505G...
I have flashed the Google 4.3 edition on it. Some days later the trouble has begin.
If i startet apps like camera or mozilla it shutdown.
So i have tried to flash the original firmware with Odin.
The device started but than it is in the Bootloop, i have tried to flash with the 4 parts (bootloader,csc,phone,pit...)
but there is only an error. When I tried the 1 Part Versions there is also the Bootloop.
-> I used the Firmware Downloads from Handy-faq.de
I hope you can help me, i need my Phone xD
Tanks!
Click to expand...
Click to collapse
Try and download firmware from Sammobile and flash again with odin
jaythenut said:
Try and download firmware from Sammobile and flash again with odin
Click to expand...
Click to collapse
I've tried but no success.
So i show all data while flashing:
ODIN MODE *
Product Name: GT-I9505
Current Binary: Samsung Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Write protection: enable
START [224,1440]
SW REV. CHECK FAIL:fused:2, Binary 1 *
*is written in red
I hope it helps I have tried a lot but nothing happens...
Realy noone can help me?
I have testet to repair bootloader with JTAG from this thread:
http://forum.xda-developers.com/showthread.php?t=2265477
but the Bootloader was unchanged!
Please help!
If the Odin flash is succesfull using the one part version, then you need to boot into recovery and select factory reset and/or wipe cache. That should probably fix it.
If not, be more specific. What firmware did you try to flash? Also what device do you have? Do you have the GT-I9505G or the GT-I9505?
Thanks for your Answer!
I tried to flash firmware 9505 German DBT with the last xxxMH5.
My Device is an GT-I9505G.
When i tried to boot in Recovery mode in the left corner is written "Recovery Boot" but then the screen turns black and
the device restart.
Flashing i tried both 4 Part and 1 part -> 4 part fails und 1 part is successfull but there is still the bootloop
Tanks for helping Lennyz!
Why do you flash I9505 roms on a I9505G? I'm don't know much about that device, but I thought the firmware can't be exchanged? Or am I wrong?
Do you have an unlocked bootloader? If so, I would try to flash cwm.
If no one else that has more knowledge about this responds in you thread, my suggestion would be the following.
1. Try this firmware: http://forum.xda-developers.com/showthread.php?t=2342377
if that fails
2. Try this method: http://forum.xda-developers.com/showthread.php?t=2360346
But then again, I don't own the device, so it's on you.
Lennyz1988 said:
Why do you flash I9505 roms on a I9505G? I'm don't know much about that device, but I thought the firmware can't be exchanged? Or am I wrong?
Do you have an unlocked bootloader? If so, I would try to flash cwm.
If no one else that has more knowledge about this responds in you thread, my suggestion would be the following.
1. Try this firmware: http://forum.xda-developers.com/showthread.php?t=2342377
if that fails
2. Try this method: http://forum.xda-developers.com/showthread.php?t=2360346
But then again, I don't own the device, so it's on you.
Click to expand...
Click to collapse
Thanksfor all your help!
I have done method 2 two times but than it works great!
Sorry but i have ab really big problem!
I had repair my phone with the Google Edition for S4.
But the phone often crashed when i open some apps, this crashes are very often.
Should I use the warranty or tried to flashed the original firmware but i won't want crash my bootloader.
Can this crashes are in connection with knox?
Thank for your help!
Good to hear you got your phone working again.
Try a factory reset, maybe that will help.
hi i was updating my phone from cm11 m8 to m9 when things went bad e.g. F.C. and there was no way around it so i formatted eveything via cwm (i mean everything) i normally do this when flashing and i flashed EE 4.4.2 NC4 stock firmware which first failed but installed 2nd time. then i tried my root file which again failed and passed 2nd time. last i tried flashing my standard cwm which kept failing so when i powered up my phone and it keeps saying no os installed. odin has always flashed first time round for me but today i dunno what happened. i've been flashing phones for years and i just dont know what i have done wrong today. i have tried odin 3.09, 1.87. tried flashing with pit file and two difernet usb cables. xda fourms seems like theres no soloution or thye links in the threads are removed. cant get into recovery only download mode. atm im on another pc downloading another firmware which is going to take 2.3 hours which is mental. (free registered)
on odin it says "complete write failed"
and in download mode on left corner says "
ODIN MODE,
PRODUCT NAME - GT I9505
CURRENT BINARY CUSTOM
SYSTEM STATUS CUSTOM
KNOX KERNERL LOCK 0X0
KNOX WARRANTY VOID 0X1
CSB-CONFIG-LSB 0X30
write protection enable
eMMc BURST enabled
tried keys which failed me ( no suprise there anyway)
please please is there anyone outthere to help me or atleast give me a link where i can download btu 4.4.2 firmware for free. many thanks
189cutter said:
hi i was updating my phone from cm11 m8 to m9 when things went bad e.g. F.C. and there was no way around it so i formatted eveything via cwm (i mean everything) i normally do this when flashing and i flashed EE 4.4.2 NC4 stock firmware which first failed but installed 2nd time. then i tried my root file which again failed and passed 2nd time. last i tried flashing my standard cwm which kept failing so when i powered up my phone and it keeps saying no os installed. odin has always flashed first time round for me but today i dunno what happened. i've been flashing phones for years and i just dont know what i have done wrong today. i have tried odin 3.09, 1.87. tried flashing with pit file and two difernet usb cables. xda fourms seems like theres no soloution or thye links in the threads are removed. cant get into recovery only download mode. atm im on another pc downloading another firmware which is going to take 2.3 hours which is mental. (free registered)
on odin it says "complete write failed"
and in download mode on left corner says "
ODIN MODE,
PRODUCT NAME - GT I9505
CURRENT BINARY CUSTOM
SYSTEM STATUS CUSTOM
KNOX KERNERL LOCK 0X0
KNOX WARRANTY VOID 0X1
CSB-CONFIG-LSB 0X30
write protection enable
eMMc BURST enabled
tried keys which failed me ( no suprise there anyway)
please please is there anyone outthere to help me or atleast give me a link where i can download btu 4.4.2 firmware for free. many thanks
Click to expand...
Click to collapse
Hi mate ,
For the firmware go here:
http://www.sammobile.com/firmwares/
in case you softbricked the phone:
http://forum.xda-developers.com/showthread.php?t=2265477
ive read that link before and thats like a newbie guide but i did try but no luck. the problem i think is at the end of flashing odin it says complete (write) failed. im guessing the transferring files are not sticking on the phone thus installion isnt possible. ive tried 2 different pit files for gt i9505 and its still not working. im running out f ideas and really dont want to spend 200-300 pounds on a new phone. i have tried 3 differnt firmware one ee and two btu ones but same problem
yes yes! i done it. simple or maybe pure luck...i re installed usb driver and flashed btu and pit file and vola!!. thaks for your help btw
189cutter said:
yes yes! i done it. simple or maybe pure luck...i re installed usb driver and flashed btu and pit file and vola!!. thaks for your help btw
Click to expand...
Click to collapse
Great man!!
Glad you did it.
hi guys i have a problem with my samsung note 4 SM-N910F .
i cant get my note 4 further then download mode.
i tried to install stock rom on my note (there is still official rom on it,marshmellows),i tried to install a stock rom because my rom was un-stable ,after triying to install a stock rom,while already having a stock rom but it gave me a error that there is no pitfile,and since then i cant get furher then download mode.
tried to twrp,but again,pit file error.
Please guys,could you guys help me with this problem?
i already tried this....http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
..and then in the middle of the process...it sayd odin: flash write failure...it dint give me pit file error...but still odin flash write failure...please please guys need help would be verry thankfull.
nobody????.please need help!!!!
i also tried different recoverys.....pleaseeeeee
it also says....mmc read fail.
now my question is also.since my knox warranty void is 0x0 do i have warranty at samsung since the mobile isnt 2 years old??.....even if i dont have the receipt of it??
if i press the powerbutton.....it says that i have to connect the mobile with kies.....but kies doesnt recognize the mobile phone in download mode??
no matter what i do,downloaded 1000 times drivers and still doesnt recognize
need urgent help really.
my phone has been rooted and has twrp installed for months now with no issues, all of a sudden my phone rebooted to the samsung logo screen with the mentioned error message. i have no idea how and why this error has occured but my phone wont boot to system. i really dont want flash stock firmware as i havent backed things up, is there a way to fix this issue with out doing a full wipe?
you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "
robhug said:
you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "
Click to expand...
Click to collapse
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.
sofir786 said:
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.
Click to expand...
Click to collapse
yes hopefully cloud is our new god ^^ yes its annoying I agree but its also a great feeling to begin with a clean phone like new after a reset , and I have also a crappy download speed so yes its a pain to download 4gb , and even better when its corrupted and need to download agin good luck with your device
Hey guys I need help.
My phone got bricked as you said (I accidentally turned off OEM unlock on my rooted phone) so I tried to flash stock firmware, but odin fails and on my phone it says (sw rev. check fail. device:3 binary:2). Plz help!
My phone: S8+
FIRMWARE: CRF7
FRP LOCK: ON
OEM LOCK: ON
Just had the very same problem meself ?
Thank god for Odin and https://updato.com/
Bt like previous posters says its like havin a new phone apart from samsung pay not working
Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..
nattyniz said:
Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..
Click to expand...
Click to collapse
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.
spawnlives said:
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.
Click to expand...
Click to collapse
That helped. Flashing the right version worked just fine.
Thanks!!
FRP lock
Hi people,
I got the "FRP lock" on my Samsung S8 SM-G950F(Exynos) and tried to flash Stock Oreo but when I press start Odin say PASS but recovery won't start.
please help
i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem
Mark Nyombi said:
i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem
Click to expand...
Click to collapse
can you get a pic of the screen youre talking about?
Hello guys i rooted my S8+ G-955F and i turned off usb debugging and ome lock
And i have android 9 installed on my device, i tried all the way but for nothink , any help please
plz help me how to slove modem crash note 3 sm n9002
without any box?
Have you tried flashing the latest stock ROM with Odin and performing a factory reset from stock recovery before booting the phone for the first time?
@audit13 yes bro i try new stock rom but not working plz help me
As you are repetitively breaking your phone you should take it to a service repair guy who can diagnose and fix .
Other than flashing the ROM with a pit file, you may have to take it to a cell repair shop as previously mentioned