I have pationed my sd card into 1 gb ext4 patition now I am using h9....now it shows only 6gb memory card....and my internal memory ia same...and the remaining 1gb is not found...hp to make that 1gb as my internal....
You need to use Link2sd & mount the partition then you can link apps
If link2sd doesn't give you the option to mount the ext partition you created it wrong
You can create your partition in cwm under the partitioning section - note that it will format your sd card so backup first to pc
Also note that your internal storage will not increase - this is a fixed hard drive and unless you magically fit a bigger one it will always be the same
What you are doing is creating virtual storage space on your sd card that acts like internal storage
The advantage is you can install more apps
The disadvantage is the more apps you link the more laggy the phone will get
marcussmith2626 said:
You need to use Link2sd & mount the partition then you can link apps
If link2sd doesn't give you the option to mount the ext partition you created it wrong
You can create your partition in cwm under the partitioning section - note that it will format your sd card so backup first to pc
Also note that your internal storage will not increase - this is a fixed hard drive and unless you magically fit a bigger one it will always be the same
What you are doing is creating virtual storage space on your sd card that acts like internal storage
The advantage is you can install more apps
The disadvantage is the more apps you link the more laggy the phone will get
Click to expand...
Click to collapse
so how can delete this partition....?so that I get my memory back
–NigthFury– said:
so how can delete this partition....?so that I get my memory back
Click to expand...
Click to collapse
By either formatting the sd card with your phone or creating a new partition in cwm (this will delete everything on sd card so backup first to pc)
Or
Use mini tool on pc to format the partition & then merge the partitions or delete all partitions & create a new one
Related
Hey guys,
I decided to setup my sd card today cause my phone internal memory was constantly running out. I followed the stickies on how to partition the SD using EASEUS. After I partitioned the app2sd partition, i booted up my phone. The phone says there is no sd card. So i rebooted the phone and mount my SD card through recoverymod. I can still see my sd card and files inside of it, but it only has 7GB left instead of 8GB. EASEUS too only detects only one partition of 7GB. Other then mounting the storage through recoverymod's Mounting USB Storage, the sd card cant be mounted anywhere else. Recoverymod shows Error: failed to mount /sdcard for all functions that require the sd card.
Has anyone came across this problem and fixed it ?
ackz said:
Hey guys,
I decided to setup my sd card today cause my phone internal memory was constantly running out. I followed the stickies on how to partition the SD using EASEUS. After I partitioned the app2sd partition, i booted up my phone. The phone says there is no sd card. So i rebooted the phone and mount my SD card through recoverymod. I can still see my sd card and files inside of it, but it only has 7GB left instead of 8GB. EASEUS too only detects only one partition of 7GB. Other then mounting the storage through recoverymod's Mounting USB Storage, the sd card cant be mounted anywhere else. Recoverymod shows Error: failed to mount /sdcard for all functions that require the sd card.
Has anyone came across this problem and fixed it ?
Click to expand...
Click to collapse
It seems that your sdcard is corrupted.
Try to backup all data and reformat all partitions in linux
Windows can't recognize second partition on sdcard & it can sometimes mess up the partition.
Try GParted (google it).
d4rkkn16ht said:
It seems that your sdcard is corrupted.
Try to backup all data and reformat all partitions in linux
Windows can't recognize second partition on sdcard & it can sometimes mess up the partition.
Try GParted (google it).
Click to expand...
Click to collapse
I tried browsing my SD card through GParted ( linux version and boot cd version), and all of them shows only 1 partition of 7gbs. One G is still missing and sd card still fails to work .
ackz said:
I tried browsing my SD card through GParted ( linux version and boot cd version), and all of them shows only 1 partition of 7gbs. One G is still missing and sd card still fails to work .
Click to expand...
Click to collapse
Did you make a backup of your sd before creating the sd ext partition
? Should be written in each tutorial concerning sd ext creation.
Otherwise your data is no more.
As already written, windows is not able to read a sd ext partition. its fully right, that your fat32 partition shows only 7gb, the other 1gb is used from the sd ext and not viewable by windows.
...to create a sd-ext very easy go into cwm-advanced-format sd card and chose 1gb ext 0 swap.
Sent from my HTC HD2 using XDA Premium App
ackz said:
I tried browsing my SD card through GParted ( linux version and boot cd version), and all of them shows only 1 partition of 7gbs. One G is still missing and sd card still fails to work .
Click to expand...
Click to collapse
Try this :
Backup all data in your micro SD.
Open & boot your computer using Gparted Linux / Parted Magic Linux / any other linux that has GParted / Parted inside its LiveCD
Run Gparted.
Delete all partitions.
Options:
Create sd-ext partition using GParted :
Create 1 fat32 Partition (as Primary) & adjust the size to your liking
Create 1 ext3/ext4 (as Primary...check if your android kernel support ext4) & adjust the size to your liking (usually 1 - 2 GB is enough)
Create sd-ext partition using CW Recovery:
Create fat32 Partition (as Primary...use all space)
Boot HD2 into AD Recovery
Go to Advanced menu
Format & choose sd-ext partition options
Flash your fav. ROM
Notes:
I personally like Parted better than GParted as it's a lot quicker & more advanced options (GParted is only a front-end for Parted).
Parted is for advanced user & TUI.
If you want to try Parted,make sure you read the manual & understand everything related to your actions (open console / terminal & type : man parted)
Use Parted using Root access (open console / terminal & type : sudo parted).
Use it with caution as it can wipe all of your hard drive data !
For more info about Parted try this link :
GNU Parted
Hey there,
the U8800 has a 2GB partition which isn't used at all when an external SD-card is installed.
The internal 2GB partition is mounted to /HWUserData and is accessible. Now I want to use it for my apps. With the typical App2SD-apps that are available in the market I cannot move the apps to this partition. They are always moved to the external card.
Moving the apps manually is not very helpful as Android treats them as install-packages when I open them within the file manager.
tl;dr: The 2GB-partition does only show up within the file manager, how can i use it for apps etc.?
XphX
http://forum.xda-developers.com/showthread.php?t=1112857
Thank your for your answer; I do not want to use that program; I fear voiding the warranty. I have no problem with installing custom-ROMs, but I won't change the partitions of the internal memory.
I'll take out the external SD-card for a moment, maybe I can install the apps to the 2GB-part then...
Seriously, why does Huawei include 2GB of memory if it is not usable?
Use the default apps2sd option.
I've been thinking about this myself and thought about changing the mount points so the internal 2GB SD is formatted as ext then linked to /sd-ext and used as an a2sd partition. The advantage is that, unlike normal a2sd, you will still be able to remove the microSD card.
The problem would be that recovery images wouldn't like this as they always expect a2sd to be the second partition on the microSD. It would also stop the backups from working..
It's something I'll need to think about a lot.
flibblesan said:
The advantage is that, unlike normal a2sd, you will still be able to remove the microSD card
Click to expand...
Click to collapse
That is exactly what I want to do. a2sd simply does not recognize the partition as it expects it to be a second partition within the external sd. Could changing the mount point resolve this issue? Where would I even mount it to? The external card will still be the one recognized (or not?)..
Hello Guys
I would like to know that if my SD Card 16GB has partition into 2 primary drive - FAT32, EXT3; and my android system is running on FAT32 partition, can I run the Link2SD to put all apps into EXT3 partition?
I try it and it shows the manual of the mounting partition. However, it shows the error message of mounting /dev/block/vold/179:2 on /data/sdext2 failed. I would like to use it even it is in SD version of Android so that I can minimize the usage of internal ROM. I use the traditional App2SD and the memory is gradually reduced when I install new apps.
Thanks
Wilson Fung said:
Hello Guys
I would like to know that if my SD Card 16GB has partition into 2 primary drive - FAT32, EXT3; and my android system is running on FAT32 partition, can I run the Link2SD to put all apps into EXT3 partition?
I try it and it shows the manual of the mounting partition. However, it shows the error message of mounting /dev/block/vold/179:2 on /data/sdext2 failed. I would like to use it even it is in SD version of Android so that I can minimize the usage of internal ROM. I use the traditional App2SD and the memory is gradually reduced when I install new apps.
Thanks
Click to expand...
Click to collapse
SD Android uses no ROM. The applications are stored on what is read by the system as 'internal storage' but is actually a data.img file which is normally 1gb, therefore you already have 1gb of your SD card dedicated to storage of apps. I don't know if you still would like A2SD despite this, but I thought this would probably influence your decision.
Nigeldg said:
SD Android uses no ROM. The applications are stored on what is read by the system as 'internal storage' but is actually a data.img file which is normally 1gb, therefore you already have 1gb of your SD card dedicated to storage of apps. I don't know if you still would like A2SD despite this, but I thought this would probably influence your decision.
Click to expand...
Click to collapse
Thanks for your reply. When downloading apps, Android will treat it storage at the internal storage, that is, the memory reduces very fast. Using App2SD will help to show higher memory storage, which is similar to NAndroid. However, the memory is still lowered as it seems to move the apps only to outside, keeping data internally. Therefore, it can download up to 60-70 apps, but it is impossible to store like 200apps. Link2SD could solve it, but I cannot link to EXT3 after using it. Any suggestion on it?
Hey guys!
I'm finally upgrading from a 1GB sd card to a 32GB
My Leo has a NAND android installed and the sd card has a A2SD partition with tons of apps and a fat partition with some stuff in it.
Is is possible to change the card and still keep it working without having to reflash the whole thing? The remaining ~31GB will be used to - if possible - expand the fat partition for music and such.
Thanks for the help!
into cwm - full backup
via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
new card into phone
into cwm - partition the new card
in cwm - restore - advanced restore - restore only the sd-ext partition
via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
start phone.
fmmsf said:
Hey guys!
I'm finally upgrading from a 1GB sd card to a 32GB
My Leo has a NAND android installed and the sd card has a A2SD partition with tons of apps and a fat partition with some stuff in it.
Is is possible to change the card and still keep it working without having to reflash the whole thing? The remaining ~31GB will be used to - if possible - expand the fat partition for music and such.
Thanks for the help!
Click to expand...
Click to collapse
Im about to face same issue, and here is what i plan to do:backup all apps and their data with Mybackup app from Market, copy all files on my pc(the best would be sending all apps on phone storage and only backup data- this will wor for SURE), turn off phone, put new sd, set partitions as they were with CWM(i mean same ext size) and copy all files on just created partition. I hope this will work, i'll have chance to check by myself in a few weeks.
EDIT: Seems like solution was posted while i was writing, but that assured me that i my idea was good
Cheers
Sent from my HTC HD 2 using XDA
samsamuels suggestion seems the best way to go as long as your ext partition is mounted as(/at) "/sd-ext" there are other places where the ext can be mounted; link2sd for example mounts at /data/sd-ext2. But you'll know when you backup in CWM. A full backup will find the ext if its at /sd-ext and will back it up and you'll see it doing so.
Another option would be to backup the full card; FAT and ext partitions, either within a linux distribution; Ubuntu for example where ext partition is read as normal, or using an application within windows to read it link Linux Reader or Ext2explore, although I don't recall it being too easy to write back to ext while in windows.
Third option being to use something like Partition wizard which should allow you to simply copy the ext partition from one sdcard to the other. Haven't done this myself (yet) and not sure how the HD2 handles partitions that are not made by CWM but you should be able to wipe the new sdcard to unallocated memory then copy the ext and FAT partitions across then resize the FAT to the rest of the sdcard.
samsamuel said:
into cwm - full backup
via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
new card into phone
into cwm - partition the new card
in cwm - restore - advanced restore - restore only the sd-ext partition
via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
start phone.
Click to expand...
Click to collapse
Doesn't creating an EXT partition in CWM format the card? So won't the copying of the FAT32 files have to be done afterwards?
yea, hence
step 2 - via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
and
step 6 - via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
samsamuel said:
yea, hence
step 2 - via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
and
step 6 - via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
Click to expand...
Click to collapse
Oh sorry, need to improve my reading skills
samsamuel said:
into cwm - full backup
via pc take full copy of everything on the fat32 part of the old sd card (music or whatever, making sure you have hidden files showing, especially the .android folder)
new card into phone
into cwm - partition the new card
in cwm - restore - advanced restore - restore only the sd-ext partition
via pc (cwm - mounts and storage - mount sd card if you dont have a card reader) and copy back all the fat32 stuff to the new fat32 part of the new card. The important part is the .android folder
start phone.
Click to expand...
Click to collapse
Awesome post, thanks
BTW back in cwm when I repartition the sdcard, can I change the sd-part size before restoring the sd-ext part?
yea, that shouldn't be a problem.
I am running CM7 on a 16GB Sandisk Class 4 uSD. I'm very new to this, so I hope someone can help me with my question. When I download apps from Google Play, where does it get stored? When I go to Settings -> Storage, I see the following: SD card/Total Space = 13.31 GB, SD card/Available space = 13.22 GB. Under Internal storage/Total space = 0.93GB, Internal storage/Available space = 680 MB. Under Additional storage: /mnt/emmc Total space = 1.0GB, Additional storage: /mnt/emmc Available space 1.0GB.
So it looks like the apps are being stored in "Internal storage", but I'm not sure whether that is in NC's internal memory, or the SD card. On the one hand, the SD card shows 13.22 GB available out of 13.31 GB, so it looks like it is not being used. But on the other hand, Additional storage: /mnt/emmc Available space is 1.0 GB, so I assume that is my 1.0 GB allotted to me by B&N, so it also doesn't look like I'm using up the NC's internal memory.
So where are my apps being stored? If they are not being stored on the SD card, how can I move the existing apps to the SD card, and also how do I set it up so that all apps (and book) downloads go to the SD card in the future?
Your apps are running on your SD card's "internal" partition which is still on the SD card.
Sent from my NookColor using XDA
Size of Internal Storage?
If Internal storage is on the SD card, why is it only 0.93 GB? Shouldn't it be (in the case of a 16GB card) 13 GB? How can I use the 13 GB that is left on my SD card?
voyager28 said:
If Internal storage is on the SD card, why is it only 0.93 GB? Shouldn't it be (in the case of a 16GB card) 13 GB? How can I use the 13 GB that is left on my SD card?
Click to expand...
Click to collapse
In CM terms, internal storage means your /data partition. For SD installed CM, your /data is still on your SD, just in a separate partition. And when play store installs an app, it installs the application files to your /data partition on the SD.
When your SD was first set up, several partitions were created on it, one of which was /data. The size for the /data partition was set when your SD was partitioned. This partitioning is why your 16GB looks like it now only has 13GB. Some of the space was set aside for other uses.
The 13GB is your media partition on the SD. It is named 'sdcard' in CM terms. It is to be used for your media files, books, movies, pictures, etc. And installed apps use it to store any files they need to (like files they download, etc.).
Sent from my Nook Color running ICS and Tapatalk
Re-sizing Partitions
j8048188 and leapinlar, thanks for explaining to this noobie where apps are stored. Is it possible to re-size the /data and /sdcard partitions, to say, 3GB and 11GB, without wiping out the apps I already downloaded? If so, how could I do it?
voyager28 said:
j8048188 and leapinlar, thanks for explaining to this noobie where apps are stored. Is it possible to re-size the /data and /sdcard partitions, to say, 3GB and 11GB, without wiping out the apps I already downloaded? If so, how could I do it?
Click to expand...
Click to collapse
Unfortunately, no, not with Windows and not once you have installed a ROM and there is information stored in /data. Windows does not know how to read the data format that /data uses. Windows based partition managers can manipulate the /data partition if there is no data in it. And the only time that is true is just after you have booted the new SD, but before you have installed your first ROM. (However, if you have Linux, you can use partition manager software there to resize with data in it since Linux knows how to read the data).
So if you have Windows and you want it set bigger, you have to catch it before you install your first ROM on it. You can back up your installed apps with titanium backup, start over with your SD again, manipulate the partitions before installing the ROM and restore your apps later. If you decide to do that, use Mini-Tool Partition Manager and make partition 4 (media) smaller and partition 3 (data) larger. Be sure to copy the titanium backup files to your PC because they will be wiped out if you start over.
leapinlar said:
Unfortunately, no, not with Windows and not once you have installed a ROM and there is information stored in /data. Windows does not know how to read the data format that /data uses. Windows based partition managers can manipulate the /data partition if there is no data in it. And the only time that is true is just after you have booted the new SD, but before you have installed your first ROM. (However, if you have Linux, you can use partition manager software there to resize with data in it since Linux knows how to read the data).
So if you have Windows and you want it set bigger, you have to catch it before you install your first ROM on it. You can back up your installed apps with titanium backup, start over with your SD again, manipulate the partitions before installing the ROM and restore your apps later. If you decide to do that, use Mini-Tool Partition Manager and make partition 4 (media) smaller and partition 3 (data) larger. Be sure to copy the titanium backup files to your PC because they will be wiped out if you start over.
Click to expand...
Click to collapse
Leapinlar, I'm running Ubuntu on one of my computers, so any advice you can give me will be appreciated.
voyager28 said:
Leapinlar, I'm running Ubuntu on one of my computers, so any advice you can give me will be appreciated.
Click to expand...
Click to collapse
In ubuntu, use gparted to resize the partitions on the sd. Shrink partition 4 (leaving space in front of it) and expand partition 3 to fill it. And usually people say 2GB is large enough for partition 3. If you find later it is not big enough, just do this again.
leapinlar said:
In ubuntu, use gparted to resize the partitions on the sd. Shrink partition 4 (leaving space in front of it) and expand partition 3 to fill it. And usually people say 2GB is large enough for partition 3. If you find later it is not big enough, just do this again.
Click to expand...
Click to collapse
Thanks, leapinlar! I will try this tonight!