Q&A for [KERNEL][AOSP/CM][14/12/14] SaberMod franco.Kernel - r215
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][AOSP/CM][14/12/14] SaberMod franco.Kernel - r215. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can we expect the kernel version with 3.4.105 ?
Arex766 said:
Can we expect the kernel version with 3.4.105 ?
Click to expand...
Click to collapse
One day, when there'll be a r216 update.
Envoyé de mon Nexus 7 en utilisant Tapatalk
zaclimon said:
One day, when there'll be a r216 update.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
I understand well? in the near future, it will be not update?
Arex766 said:
I understand well? in the near future, it will be not update?
Click to expand...
Click to collapse
I did not suppose that loool. I only said that I will update to 3.4.105 when there'll be a r216 update.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Wasn't able to install this using CM's own recovery. I got the E: footer is wrong and E: signature verification failed-errors with r216. Any ideas what I can try?
Doggie52 said:
Wasn't able to install this using CM's own recovery. I got the E: footer is wrong and E: signature verification failed-errors with r216. Any ideas what I can try?
Click to expand...
Click to collapse
Try twrp and see if it works. I have no problems using it.
Envoyé de mon Nexus 7 en utilisant Tapatalk
zaclimon said:
Try twrp and see if it works. I have no problems using it.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Thanks for the tip, it worked fine to install using TWRP !
Installed Latest SaberMod to CM12 and Run Out of SDCARD
Hi,
Yesterday I've Installed Franco Kernel and it messed up something with the Display Colors and delete the root from my phone.
then I installed the Sabermod which was the one that states CM Compatible [Even in a Test Stage].
Now I have no Internal Space, I've plugged phone and it doesn't allow me to apply any changes.
do i need to flash stock lollipop image to get my sdcard back and then root and get cm again?
otgcontrol.sh
I wonder if there is a typo at otgcontrol.sh
Shouldn't it be:
Code:
echo "0" > [COLOR="Red"]/[/COLOR]sys/module/msm_otg/parameters/otg_hack_enable
?
USB DAC
I've tried to use USB DAC with 216.2 kernel on both 5.0.1 original ROM and on xenonhd from 02-18-15, without success.
I'm using powered OTG cable with generic USB DAC. This configuration worked using CM11 and previous versions of Franco kernel. OTG is enabled using Synapse. /sys/module/msm_otg/parameters/otg_hack_enable contains 1, And I mound USB mass storage device successfully. USB Host Diagnostics can't find my DAC either.
USB Keyboard
Hi there,
first of all thanks for this kernel! I like using franco.kernel with CM12 and feel like it really helps my battery life.
I'd be really fantastic though if with this kernel I could also use my phone as an USB HID device to the PC entering passwords from Keepass2Android and such. From what I've seen there's the app USB Keyboard which refers to the Hells Doctor #Numeriks / T.A.R.D.I.S. MOD kernel for the Nexus 4. The associated patch seems to be this one. It basically adds /dev/hidg0 and /dev/hidg1 for keyboard and mouse.
Would you be willing to include this patch as well? I'd really greatly appreciate it as I like your kernel!
TIA!
Lars
homies
Does this kernel work for the euphoria ROM?
---------- Post added at 02:59 AM ---------- Previous post was at 02:56 AM ----------
Does this kernel work for the euphoria ROM?
th3cocoman said:
Does this kernel work for the euphoria ROM?
---------- Post added at 02:59 AM ---------- Previous post was at 02:56 AM ----------
Does this kernel work for the euphoria ROM?
Click to expand...
Click to collapse
Yes, I do believe that you need the cm version to get it to work.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Trouble installing v3 on Nexus4
Tried installing Quanta (v3) on my CM12.1 Nexus 4 and got following errors
footer is wrong
signature verification failed
I'm using CM12's recovery. Anyway to install the kernel with this?
Should I use CWM/TWRP? (also this might sound like a noob question, but do I need to reinstall CWM/TWRP to get out of CM recovery?)
lucidillusions said:
Tried installing Quanta (v3) on my CM12.1 Nexus 4 and got following errors
footer is wrong
signature verification failed
I'm using CM12's recovery. Anyway to install the kernel with this?
Should I use CWM/TWRP? (also this might sound like a noob question, but do I need to reinstall CWM/TWRP to get out of CM recovery?)
Click to expand...
Click to collapse
Yes you do need to install twrp or CWM to install Quanta.
Hi, in the Quanta V3 does not work the microphone gain, it is possible fix?
Mako Cm 12.1 - looking for kernel
I've been looking for the right custom kernel to install on my nexus 4 running CM 12.1. I used to run FK with another phone running cm 10. When I tried to flash ROM to CM11, the phone freaked out and ever since I've been too scared to try anything to do with custom kernel or updating ROM.
Right now I have a nexus 4, freshly rooted and CM12.1 installed. I saw many names of kernels like Hybrid and CodeBlue but Quanta seems like a good one to go for...
Am I on the right track? Could someone point me to where I can download the right kernel which won't mess up the phone? Thank you.
raphtaph said:
I've been looking for the right custom kernel to install on my nexus 4 running CM 12.1. I used to run FK with another phone running cm 10. When I tried to flash ROM to CM11, the phone freaked out and ever since I've been too scared to try anything to do with custom kernel or updating ROM.
Right now I have a nexus 4, freshly rooted and CM12.1 installed. I saw many names of kernels like Hybrid and CodeBlue but Quanta seems like a good one to go for...
Am I on the right track? Could someone point me to where I can download the right kernel which won't mess up the phone? Thank you.
Click to expand...
Click to collapse
Quanta do work fine with cm 12.1.That's one thing I can ensure you at least.
Problem with Blisspop 3.2
I've installed this kernel via recovery, it reboot and passed the boot logo, but the screen are black and show nothing...
Related
CLOSED
reserved
reserved #1
Quick Porting
reserved
reserved
Reserved #2
Reserved for OP
Reserved for OP
All questions are allowed! :good:
I'll give it a try when I get home
Edit : @arDroid.99 can you also use 7zip on windows or just winrar ?
Sent from my Galaxy Nexus using Tapatalk
gamerman123x said:
I'll give it a try when I get home
Edit : @arDroid.99 can you also use 7zip on windows or just winrar ?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
yeah, 7zip will work too My instructions for ziping and unziping are based on winrar.
updated:highfive:
Thanks this worked like a charm for porting 4.4 Roms :thumbup:
Sent from my Galaxy Nexus using Tapatalk
gamerman123x said:
Thanks this worked like a charm for porting 4.4 Roms :thumbup:
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Yep, Its the ultimate guide:laugh:
Hey man =) firstly i really like to say thanks a lot for the guide. but I have an issue. I tried to port GS3 CM10.2 4.4 rom to HTC one x CM 10.2 RC1 rom. Even i tried your 2nd section I'm still stuck at boot loop. the closest phone is one x+ and it has only aosp 4.4 so i can't use that. by displays GS3 sounded much better and i tried that. I'm still stuck. Was i supposed to use something else instead of another CM kitkat rom? Thanks!
can someone do this to SU760 i had a hard time doing this bunch of our PRO dev just leave
Sent from my SU-760
Lg Su760
Rom: AOKP JB
Alcatel OT-995
Rom: CM 10
ereneren564 said:
Hey man =) firstly i really like to say thanks a lot for the guide. but I have an issue. I tried to port GS3 CM10.2 4.4 rom to HTC one x CM 10.2 RC1 rom. Even i tried your 2nd section I'm still stuck at boot loop. the closest phone is one x+ and it has only aosp 4.4 so i can't use that. by displays GS3 sounded much better and i tried that. I'm still stuck. Was i supposed to use something else instead of another CM kitkat rom? Thanks!
Click to expand...
Click to collapse
Yeah, this guide will work on 4.3 cm10.2 and any 4.0+ rom( only difference is the priv-app folder). The reason of your issue may be because the device your porting from. I here alot of people port gs3 roms using the nexus 4. Try using the nexus 4.
And remember to use stable roms. Roms that are like in alpha stage my not be able to port saying some apps, permission,etc still relies on unneeded libs.
thank you.I will be try.You are maked a very good work.Thanks again.
arDroid.99 said:
Yeah, this guide will work on 4.3 cm10.2 and any 4.0+ rom( only difference is the priv-app folder). The reason of your issue may be because the device your porting from. I here alot of people port gs3 roms using the nexus 4. Try using the nexus 4.
And remember to use stable roms. Roms that are like in alpha stage my not be able to port saying some apps, permission,etc still relies on unneeded libs.
Click to expand...
Click to collapse
hey man. I tried stable rom this time. I used CM 10.1.3 as base (device is endeavoru) and I used crdroid CM11 rom from mako (nexus4) but with or without the fix it doesn't boot I'm always stuck on boot logo. can you give a link for porting which would be best? Thanks a lot!
ereneren564 said:
hey man. I tried stable rom this time. I used CM 10.1.3 as base (device is endeavoru) and I used crdroid CM11 rom from mako (nexus4) but with or without the fix it doesn't boot I'm always stuck on boot logo. can you give a link for porting which would be best? Thanks a lot!
Click to expand...
Click to collapse
Your base isn't the same android version as your port ROM.
Cm10.1 is 4.2
Cm11 is 4.4
Sent from my GS3 on 4.4 KitKat using Tapatalk 4
ebildude123 said:
Your base isn't the same android version as your port ROM.
Cm10.1 is 4.2
Cm11 is 4.4
Sent from my GS3 on 4.4 KitKat using Tapatalk 4
Click to expand...
Click to collapse
yeah, you right!:laugh: I didn't read that response correctly, I must have been distracted:silly:
After doing this which the rom I ported boot normally and everything seen to work exceptfor the settings app. I get a Unfortunately, Settings Has Stopped error once I hit settings. What can it be?
SVLAN said:
After doing this which the rom I ported boot normally and everything seen to work exceptfor the settings app. I get a Unfortunately, Settings Has Stopped error once I hit settings. What can it be?
Click to expand...
Click to collapse
This isn't a cause of the guide and congratulations. First, what rom did you port and what did you use as base? Like the devices
Q&A for [ROM][KitKat 4.4] MIUI v5 From MIUI.com [4.9.26]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Help please
So im trying to flash Miui Rom , but i keep getting this: E: unable to open zip file in red letter! help please..
Try to download again
Tapatalké depuis mon OnePlus One MIUI !
Hi,
I have a question,, if we change the build prop to make the navbar visible.
Will the mipop disappear?
And what should i change in the build prop?
Thanks
Sent from my Nexus 4 using XDA Premium 4 mobile app
Archlox said:
Hi,
I have a question,, if we change the build prop to make the navbar visible.
Will the mipop disappear?
And what should i change in the build prop?
Thanks
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Evrything is explained in 2nd post ...
Kingzak34 said:
Evrything is explained in 2nd post ...
Click to expand...
Click to collapse
Sorry i forgot to mention
Im currently running on miui v6
Is it the same? if i flash the stock navbar from miui 4.9.26 will be just fine?
Archlox said:
Sorry i forgot to mention
Im currently running on miui v6
Is it the same? if i flash the stock navbar from miui 4.9.26 will be just fine?
Click to expand...
Click to collapse
Should be the same, and I didnt see any true MIUI V6 for now. But if you want support for a ROM, please ask in ROM thread.
hi i need some miror vor New muiu
@ bro Kingzak
How to have 2 mipop ?
Sent from my Nexus 4 using Tapatalk
jigga1986 said:
hi i need some miror vor New muiu
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=0Bx5Izzyb5WF-SkNyZXBJcm5BTW8&usp=sharing
blackrose1 said:
@ bro Kingzak
How to have 2 mipop ?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
What ?
Kingzak34 said:
https://drive.google.com/folderview?id=0Bx5Izzyb5WF-SkNyZXBJcm5BTW8&usp=sharing
What ?
Click to expand...
Click to collapse
Mipop= floating navigation
Its on miui lushengduan rom
I want to add onother mipop to my screen
I did this before.. But i forgot how!!!
Sent from my Nexus 4 using Tapatalk
blackrose1 said:
Mipop= floating navigation
Its on miui lushengduan rom
I want to add onother mipop to my screen
I did this before.. But i forgot how!!!
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
I dont know, I never seen 2 mipop.
And I dont see the poin of it.
Installing MIUI as 2nd rom on multirom
Hey guys, if you have imei and signal lost problem when installing miui as 2nd rom on multirom maybe you can try my solution.
First, downgrade multirom. In my case, I flashed version 29.
Reflash your miui to 2nd rom as ussual. I did clean install (delete rom then add rom)
Then if the problem still exist, try to downgrade your TWRP multirom before flash your miui rom. In my case, I flashed version 2.8.1.
If everything is normal again, you can reflash multirom and TWRP to the latest version.
I think imei and signal lost was cause by new multirom. I had the same problem when I tried to update my miui with multirom v31 and TWRP 2.8.5 installed. CMIIW
Which radio version you use? Is it the Kitkat version , the Lollipop version, or the JellyBeans version of the radio?
ashahin1 said:
Which radio version you use? Is it the Kitkat version , the Lollipop version, or the JellyBeans version of the radio?
Click to expand...
Click to collapse
My primary rom is lollipop with lollipop radio also. I didn't flash radio to 2nd rom (miui) and i didn't find any problem with signal. But you can try to flash kitkat radio to 2nd rom with twrp multirom if you have problem with signal.
Great News!
That sounds great!
Super su problem.
First of all, thank you for your work. MIUI V6 looks very awesome!!
I usually use Super Su to get root access.
In any version of miui except this, there was no problem about it.
But in this rom, if I flash the Super su or download it from PlayStore, neither of them work.
Original miui root permission in app 'security' works well.
But super su doesn't.
Any other solutions??
eathern said:
First of all, thank you for your work. MIUI V6 looks very awesome!!
I usually use Super Su to get root access.
In any version of miui except this, there was no problem about it.
But in this rom, if I flash the Super su or download it from PlayStore, neither of them work.
Original miui root permission in app 'security' works well.
But super su doesn't.
Any other solutions??
Click to expand...
Click to collapse
I dont know. But it's recommended to use MIUI Root app.
Torch Bug
In v6 torch app does not work...
cant boot in cm 12
I've installed MIUI V6 rom for nexus 4 and now i cant go back to lollipop
Q&A for [ROM][UNOFFICIAL][5.1.1_r5] BlissPop v3.6 [jfltexx] [UPDATE 26/06/2015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UNOFFICIAL][5.1.1_r5] BlissPop v3.6 [jfltexx] [UPDATE 26/06/2015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Mercie
Weather on lock screen
Hi is there any way to make the weather icon on the lock screen bigger as it is tiny.
Thanks
So far, excellent ROM!
I have tried a lot of roms, RR and AICP was very good, but this one is the best!
Excelent ROM, but mobile data is not working for me. I'm looking forward to next update!
Jakub Miřejovský said:
Excelent ROM, but mobile data is not working for me. I'm looking forward to next update!
Click to expand...
Click to collapse
Try the fix http://forum.xda-developers.com/showpost.php?p=61698541&postcount=636 posted by nikkpap
CraigHardy said:
Try the fix http://forum.xda-developers.com/showpost.php?p=61698541&postcount=636 posted by nikkpap
Click to expand...
Click to collapse
Hi,
first of all thanks for the rom its awesome
but i have the same problem with mobile data (cant use them) it says that they are disconected (in sim card details) even if i turn them on (i am on newest modem i9505XXUHOF2) and the previous suggestion didnt help me
so anyone have some suggestion ?
thanks for any help =)
Camera front Google bug
Fix it ?
Excellent Rom.
Stable. Long the battery holding.
Good work. Thanks!
Thank you.
How stable is this room? I pretend to use it on my m919 as my daily driver.
Installing on 4.4.2 i9505
I need ur guidance
I have S4 i9505 LTE and wants to install bliss ROM
but i am on android 4.4.2.
Do i have to flash stock firmware 5.01 of Samsung
before flashing this ROM?
TWRP or CWM which one is recommended?
Pls help n guide
Port to tmo gs4?
5.1.1r8 blisspop for jfltetmo would be amazing i request your rom for my phone thanks youuuuuu
asifaltafali said:
I need ur guidance
I have S4 i9505 LTE and wants to install bliss ROM
but i am on android 4.4.2.
Do i have to flash stock firmware 5.01 of Samsung
before flashing this ROM?
TWRP or CWM which one is recommended?
Pls help n guide
Click to expand...
Click to collapse
You don't have to flash stock firmware from Samsung. Just make a full wipe in recovery.
I recommended to use twpr because gapps won't install most of the time with cmw.
blisspop rom
Hi guys,
this rom is awesome,
the only bug that i found is the service Exchange crash, I cannot syncronize my mail.
And when talking on mobile can't use the volume Keys for increase/decrease volume because it will increase/decrease only ringtone.
how to fix?
Thank you
In my example, as I will call to someone I have a black screen. And do not hang up or anything. And so it is flying all signals, then the post and did so until take out the batteries. Unless, someone knows where is the option of setting the "power button" as a button to end conversation?
Deleted
Envoyé de mon GT-I9505 en utilisant Tapatalk
Hi..
I have problems with supersu and lucky patcher..root is not stable..
Gesendet von meinem GT-I9505 mit Tapatalk
Latest build..no Bugs so far
Gesendet von meinem GT-I9505 mit Tapatalk
wechat and QQ brower have problem
click the web link in wechat Moments will FC
QQ brower open any website FC too...
The rom is great..no bugs..nö problems..good battery life
Gesendet von meinem GT-I9505 mit Tapatalk
First I want to say I didn't build this rom, or have anything to do with Mokee Open Source. Any bug reports or feature requests should be directed to Mokee developers.
I only started this thread to provide a link to the roms, as they are not available on xda until now, and a lot of users may not be aware they are still around.
Personally I have found this rom to be very stable, with some nice features.
Links:
Mokee Official Site
Mokee on Google+
Changelog
Bug Tracker
Official Rom Releases
http://download.mokeedev.com/?device=i9100
Recommended Gapps
Open Gapps
Warning(particularly for MM builds): If you try to flash gapps, you will probably find it won't fit on the stock /system partition. In this case you will need to repatition - Repartitioning guide.
Make sure you choose a pit file that increases /system and not just /data(eg, I91001GB_4GB.pit)
Alternatively use Lanchon's re-pitting tool if you want to avoid losing your data
If you want to donate to Mokee and make their life a bit easier(donations will go towards bandwidth etc),
you can donate HERE
Instructions
1. Wipe data/factory reset(from KK compatible recovery)
2. Format /system
3. Flash rom
4. Flash gapps(optional)
5. Flash isorec recovery(for MM, see below), you only need to do this once
6. Reboot
Credits
- Mokee Developers
- CyanogenMod
- AOSP
- SlimRoms
- OmniRoms
Note: Now that Marshmallow(6.x.x) has been released, a warning for anyone flashing these latest nightlies. The kernel(isorec CM kernel) comes bundled with CM recovery, which is more or less useless. If you want a working recovery, you will need to flash the rom, followed by gapps(if you want play store), followed by an isorec recovery from HERE
Be sure to flash either CWM or TWRP for i9100. It is obvious from the name of the file.
And read about Isorec if you are not sure.
Thank you to @Troubadour666 for the Youtube review
Thank you @noppy22 for starting this thread. I had been downloading the ROM from G+ but the added benefit of a thread here on xda means that you have fellow S2 users to discuss problems etc with. Thank you again mate.
downloading....
thx for share
Thank you for the rom....downloading :good:
@noppy22 Have you run Mokee using Lanchons iso-Rec kernel and arnabs Twrp recovery? If so, how did it run?
Drhedphuk said:
@noppy22 Have you run Mokee using Lanchons iso-Rec kernel and arnabs Twrp recovery? If so, how did it run?
Click to expand...
Click to collapse
Mokee has already got my twrp recovery as I supplied it to them back in june 2015
@arnab Thank you.
Drhedphuk said:
@noppy22 Have you run Mokee using Lanchons iso-Rec kernel and arnabs Twrp recovery? If so, how did it run?
Click to expand...
Click to collapse
I've only run it with stock kernel. The only thing I changed(with Kernel Audiutor) was i/o scheduler to row. I suspect any cm12.1 compatible kernel will work. I might give one of Lanchons trim kernels a go in the next day or so
Edit: I tried the last trim/twrp kernel and got bootloop on 160102 build....
noppy22 said:
I've only run it with stock kernel. The only thing I changed(with Kernel Audiutor) was i/o scheduler to row. I suspect any cm12.1 compatible kernel will work. I might give one of Lanchons trim kernels a go in the next day or so
Click to expand...
Click to collapse
Hi mate, I tried Lanchons isoRec kernel when flashing and it bootlooped. Xposed failed to flash for me too.
Thanks for getting back to me.
Drhedphuk said:
Hi mate, I tried Lanchons isoRec kernel when flashing and it bootlooped. Xposed failed to flash for me too.
Thanks for getting back to me.
Click to expand...
Click to collapse
I just edited my post, lol. Not sure whether maybe an AOSP kernel like DragonKernel might work, I'll upgrade tomorrow and give it a go...
Hi,
in one pass, rom + open pico gapps + xpose v79 sdk22 flashed ok
Troubadour666 said:
Hi,
in one pass, rom + open pico gapps + xpose v79 sdk22 flashed ok
Click to expand...
Click to collapse
Xpose will not flash for me.
OK, I tried the latest build(12/01) with DragonKernel(30/11), and got to optimizing apps, then bootloop. So, stock kernel seems the only option for now...
noppy22 said:
OK, I tried the latest build(12/01) with DragonKernel(30/11), and got to optimizing apps, then bootloop. So, stock kernel seems the only option for now...
Click to expand...
Click to collapse
You tried "ripping-out" arnab's kernel from his latest DU and put it over this ROM?
:good:
souler456 said:
You tried "ripping-out" arnab's kernel from his latest DU and put it over this ROM?
:good:
Click to expand...
Click to collapse
Well, no. The reports of freezing with his last release stopped me from trying that. BTW the GeneSys kernel(.tar) that was released is the same as the kernel in DU 9.8, but for me the DragonKernel I tried is the last "AOSP" kernel I found to be stable
Thanks for share... What features has this rom? On official Web site can't found anything about features?
I9100 Tapatalk, RR 5.1.1 Lollipop
089man said:
Thanks for share... What features has this rom? On official Web site can't found anything about features?
I9100 Tapatalk, RR 5.1.1 Lollipop
Click to expand...
Click to collapse
It's basically Cyanogen 12.1 with a couple of extra features like wakelock blocker. My own opinion, I think it is a lot smoother than stock Cyanogen.
To correct my earlier post. I reflashed the Rom and flashed xposed during the flash process and it flashed without any problems.
089man said:
Thanks for share... What features has this rom? On official Web site can't found anything about features?
I9100 Tapatalk, RR 5.1.1 Lollipop
Click to expand...
Click to collapse
I added some screenshots in the OP. Hope this gives you an idea of features....
noppy22 said:
I just edited my post, lol. Not sure whether maybe an AOSP kernel like DragonKernel might work, I'll upgrade tomorrow and give it a go...
Click to expand...
Click to collapse
Great ROM! I repartitioned my phone using 1/4G pit and this ROM works very nice. Thanks devs!
Xposed may not be installed in MoKee RELEASE version cuz they said they odexed the ROM.
Sent from my GT-I9100 using XDA Free mobile app
Hey Guys ,
This is OT thread for blu_sp★rk kernel
Keep Calm and go OT
Thanks..
LOL
Great idea!!
So I think that I can ask my noob question here!?
Is it compatible with resurrection remix 6.0? I think so because it is a cm beta based, anyone can confirm?
Inviato dal mio unknown utilizzando Tapatalk
skaburn said:
So I think that I can ask my noob question here!?
Is it compatible with resurrection remix 6.0? I think so because it is a cm beta based, anyone can confirm?
Inviato dal mio unknown utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, it should work. There is a cm13 version of blu spark on the download page. Always read the disclaimer @eng.stk has on the original thread regarding support.
hey, I recently flashed CM13 and the gapps (and SuperSU for some reasons), Do I need to do a dirty flash before flashing blu_spark's kernel? Thanks
Nexx_ said:
hey, I recently flashed CM13 and the gapps (and SuperSU for some reasons), Do I need to do a dirty flash before flashing blu_spark's kernel? Thanks
Click to expand...
Click to collapse
NO
anshu goel said:
NO
Click to expand...
Click to collapse
Thank you
If somebody has Blu_spark's version of twrp, could you please share it. Official twrp seems to not support encrypted backups if data and cache are formatted to f2fs. Thanks.
Edit: Not required anymore. Data and cache wipe resolved the issue so it definitely was something else causing the issue. The backup got stuck at 99℅ each time and cancelling it gave error 'createTarFork() process ended with ERROR=255'.
Anyone have compared bluspark witk boeeffla kernel ? Which one is better ?
Kiras_PL said:
Anyone have compared bluspark witk boeeffla kernel ? Which one is better ?
Click to expand...
Click to collapse
it depends, boeeffla is only for OOS, bluspark can work also on CM.
If you want OC and change more HW settings then boeeffla, Boeffla Config - profiles , etc. http://forum.xda-developers.com/oneplus-x/general/profiles-boeffla-kernel-profiles-t3330187