Database Users

[Q]MiniCM6-1.0.0 - bugs

I cant post in MiniCM6 thread so i hope post in this sectio will be ok
Im runing on my X8 this rom from 3 days but some thinks that should work is not working correct.
1. terminal was working but i couldnt write any think - nothing shows on screen when i write. I try to reinstal terminal but i have FC after instaling new one.
How to fix this?
2. OC not remember last setings after reboot. it have to be set again.
any way great rom and nice work.

1. Press option button, tap in 'Toggle soft keyboard'.
2. In set cpu you have to check 'Set on Boot'. Becareful, if you set the freq too high you might get boot loop.
CMIIW
Sent from my X8

1. i did that, and when i write there is nothing on screen show. only $
after press enter its go line down only. keyboard working.
still dont know how to fix FC in new instaled terminal
2. thank. its working well on 749 from 24hr so i will save this setting and monitor

Install another terminal from the market

Graveir said:
Install another terminal from the market
Click to expand...
Click to collapse
i had to do this as well so the terminal installed didn't work.

Graveir said:
Install another terminal from the market
Click to expand...
Click to collapse
i try two difrent ones and all couse FC on start.

Graveir said:
Install another terminal from the market
Click to expand...
Click to collapse
which terminal are u using that works ?
this's my problem too
upload yours if it's possible.... tnx

ok. i try last more time and install from market : Android Terminal from linxmap
its working, first start get FC but second start normal and get root with no problem

bluebart said:
ok. i try last more time and install from market : Android Terminal from linxmap
its working, first start get FC but second start normal and get root with no problem
Click to expand...
Click to collapse
do u mean this ?

yes. i didnt try to do any using this terminal, but this one is only i found working ok

bluebart said:
yes. i didnt try to do any using this terminal, but this one is only i found working ok
Click to expand...
Click to collapse
i'm actually working with other terminals
others can work too ,but by a little bob...

i made mess and have to reinstall system.
i was try to use teminal instaled with system and still i can write letters (numbers only)
i have live with this for now, have no idea how to fix it.
@X1111:
if you have any solution how to manage this terminal to work correct, please write in here.
Last thing that make me frustrated is keyboard. no possible (or i dont know how to set) to get full or mini QWERTY keyboard.
Please, if there is any1 who can tell me how to set this?

in my miniCM rom these teminal does not work (the purpose is ability to type ,isn't it?)
but when u type ur command , then use "space" , the command apears

Wireless freeze on Wifi N (65mpbs), can't download large files (Angry Birds).
Work stable in Wifi G.

Guys i wanna put on the miniCM6 on my device, is it stable? all works fine?
thx

Daniel Gs said:
Guys i wanna put on the miniCM6 on my device, is it stable? all works fine?
thx
Click to expand...
Click to collapse
Version 1.0.0 works fine for me. I've been using it since it was released and I've noticed only one reboot. There are patches that fixes compass and camera as well (read the thread). It's stable enough for daily usage (tested with ARC theme).
Cheers!

I have an another bug with video recording. I record, than i play it, the picture lates 2-3 sec. I checked the video on pc and there is the same problem... I have the latest baseband, and i did a factory reset and also a reflash. Can anyone help me?
Best regards
Sent from my X8 using XDA Premium App

Need help :(

Ok so i am doing a module for dual touch (the fake one for synaptics) and i write this in terminal emulator
dmesg | grep cyttsp-i2c
and it shows nothing
soo i try it with the su command and then still nothing
and i restard do the same thing and still noting
So dose it mean i dont have a digitizer ???
The touch works and dual touch is working perfectly.

Spevky said:
Ok so i am doing a module for dual touch (the fake one for synaptics) and i write this in terminal emulator
dmesg | grep cyttsp-i2c
and it shows nothing
soo i try it with the su command and then still nothing
and i restard do the same thing and still noting
So dose it mean i dont have a digitizer ???
The touch works and dual touch is working perfectly.
Click to expand...
Click to collapse
you need to type "su" its got super user permissions!

use this
select 4 and than 1
btw how do you stand with DT fot synaptics ???

tony-noob said:
you need to type "su" its got super user permissions!
Click to expand...
Click to collapse
Tony-noob no offence BUT read the whole thing i have done that
Ok i dont need to reinstall the modules ... i need to fix it ...
when i type
dmesg | grep cyttsp-i2c
it doesent show anything

Spevky said:
Tony-noob no offence BUT read the whole thing i have done that
Ok i dont need to reinstall the modules ... i need to fix it ...
when i type
dmesg | grep cyttsp-i2c
it doesent show anything
Click to expand...
Click to collapse
in toolbox select x8 module and than check x8 digitizer (4 than 1)

@ OP do you mean you have made a DT module but you are not sure even which digitizer you got ?

Spevky i have the same issue, but 2 days ago i've tried this http://forum.xda-developers.com/showthread.php?t=1135965 on stock 2.1 and the answer in terminal was cyttsp_i2c_probe: Successful registration cyttsp-i2c, so i've installed MultiTouch Visualizer 2 and check and it's ok, but in maps or opera mobile it's not work (because stock rom).
So i've change rom to GingerDX v003 i try again and got no answer in terminal emulator, like you.
I'll check this more later by putting this module in phone and try again with execute command in terminal and next MultiTouch Visualizer 2.

mr-tical said:
Spevky i have the same issue, but 2 days ago i've tried this http://forum.xda-developers.com/showthread.php?t=1135965 on stock 2.1 and the answer in terminal was cyttsp_i2c_probe: Successful registration cyttsp-i2c, so i've installed MultiTouch Visualizer 2 and check and it's ok, but in maps or opera mobile it's not work (because stock rom).
So i've change rom to GingerDX v003 i try again and got no answer in terminal emulator, like you.
I'll check this more later by putting this module in phone and try again with execute command in terminal and next MultiTouch Visualizer 2.
Click to expand...
Click to collapse
ok thanks man

I've done as i say. I paste this module in phone, run command in terminal and checked in visualiser,ok,next checked in stock internet app,works great.
Remember that i dont have answer from emulator as we talk about

Help with executing commands in adb; stuck at ".../bin/sh...No such file..." error

Help with executing commands in adb; stuck at ".../bin/sh...No such file..." error
I am out of all tricks now for reviving my Note which boots into download and recovery mode. I conclude that from what I have experienced, that factoryfs is the partition which fails to take any write commands when I odin a ROM, as it gets stuck at the factoryfs message. I have tried all the flashing of kernels and ROMs with no luck.
Working with adb seems to be the only option, to configure the partitions on my device manually. The big issue is that I am not able to execute "adb shell" command using Forest1971's guide.
So far, I have had no luck going beyond the "exec -/system/bin/sh...:No such file or directory...(2)" error message, when I type the "adb shell" command.
Can someone with the know-how of how to work through adb help with this? This is my last effort of trying to recover my Note, and if it fails, I will have no choice but to sent the device out of the US. I dread sending my phone out of the country for repairs, as I don't know just how long it will be before it gets fixed and is shipped back to me.
Please do not suggest any flash options, because as I said, I have tried all there is to do with flashing - nothing has helped.

First see if you have a /system filesystem. Looks to me that it doesn't exist. See if you can type
Code:
$ cd /system
or
Code:
$ cd /system/bin
If it complains then there's your problem - you don't have a functioning /system. Maybe type mount and show your filesystems.
I know you asked for no flash suggestions, but have you tried making the device do a hard reset - when powered off hold down home, volume up while holding down power on then release power button when screen shows life. May be worth a shot, but looking like another ICS firmware/emmc issue from here... good luck.
[edit]
should have read your post more closely. Looks like you have no /system/bin/sh at all so can't fire up a shell, so you can ignore my initial suggestion.

paulshields said:
First see if you have a /system filesystem. Looks to me that it doesn't exist. See if you can type
Code:
$ cd /system
or
Code:
$ cd /system/bin
If it complains then there's your problem - you don't have a functioning /system. Maybe type mount and show your filesystems.
I know you asked for no flash suggestions, but have you tried making the device do a hard reset - when powered off hold down home, volume up while holding down power on then release power button when screen shows life. May be worth a shot, but looking like another ICS firmware/emmc issue from here... good luck.
[edit]
should have read your post more closely. Looks like you have no /system/bin/sh at all so can't fire up a shell, so you can ignore my initial suggestion.
Click to expand...
Click to collapse
Suggestion ignored. Any more?

Get an iPhone?

Look at this thread
http://forum.xda-developers.com/showthread.php?p=26279833
Sent from my GT-N7000 using Tapatalk

paulshields said:
Get an iPhone?
Click to expand...
Click to collapse
I won't go the route of laughing and mocking you for saying that. I do think it's a very well put together device, but it just doesn't serve my needs of a big screen, the ability to be free...etc. By the way, you asked me to ignore your suggestion, so I did - FYI.
zviki said:
Look at this thread
http://forum.xda-developers.com/showthread.php?p=26279833
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
I was in that thread, and the suggestions didn't help as it is too complex a process. I was hoping to pick up from scratch, so I created this thread.

incisivekeith said:
I won't go the route of laughing and mocking you for saying that. I do think it's a very well put together device, but it just doesn't serve my needs of a big screen, the ability to be free...etc. By the way, you asked me to ignore your suggestion, so I did - FYI.
I was in that thread, and the suggestions didn't help as it is too complex a process. I was hoping to pick up from scratch, so I created this thread.
Click to expand...
Click to collapse
Hi, please take a look to my post. http://forum.xda-developers.com/showthread.php?p=26350317#post26350317
Just flash that kernel from cmw, and you should be able to run commands on adb shell.

matiasg85 said:
Hi, please take a look to my post. http://forum.xda-developers.com/showthread.php?p=26350317#post26350317
Just flash that kernel from cmw, and you should be able to run commands on adb shell.
Click to expand...
Click to collapse
Thanks for the kernel, but it seems you didn't have much luck solving the issue, even after doing everything in adb correctly. Is that the case?

incisivekeith said:
Thanks for the kernel, but it seems you didn't have much luck solving the issue, even after doing everything in adb correctly. Is that the case?
Click to expand...
Click to collapse
Yes, unfortunatelly i did everything as stated on adb, but had no luck. If ssc don't replace it, i will try using the memory blocks used by the "internal sd card".
You must try it anyway, there were some users that succesfully unbricked the phone.

Did anyone try this mk2efs command with -c option ON ??
Sorry Incesivekeith
I was out of connection for past 2 days.
We have to pull Mr Forest1971 for doing this.
Let me sum up :
parted is not able to solve your issue.
mk2efs is another formating tool that comes with CWM
You are stuck up in executing commands.
Now the idea of flashing the cwm kernel is fine. Did u try that ??
Mr Forest1971 :
Did you see Dr Sumralls comments for this bug.
''He says that we have to go for a full wipe. I have a tool but I dont know I couldnt share it.''

incisivekeith said:
I won't go the route of laughing and mocking you for saying that. I do think it's a very well put together device, but it just doesn't serve my needs of a big screen, the ability to be free...etc. By the way, you asked me to ignore your suggestion, so I did - FYI.
Click to expand...
Click to collapse
I asked you to ignore the initial suggestion as you've obviously not got any functioning recovery. You've not provided much info about how you got to this position, but in my similar situation I got out of it by successfully flashing a FULL WIPE factoryfs (LA4 in my case) and doing the factory reset as I mentioned in my first response. I lost a few GB of my eMMC storage but got a working device. May not help you, but may be useful info for others. Share and share alike. Good luck dude .

Official Ubuntu Touch for Galaxy Tab 10.1 is here!

I've been following the progress on official Ubuntu Touch port to Galaxy Tab 10.1 for a while and today they have updated the wiki for a dedicated session and early build install instructions.
This is an early build, some things work, some things are unknown and wifi is work in progress.
Installation
1. Download the ubuntu preinstalled and the p4wifi specific cyanogenmod image from the unlock instruction section below.
2. Put both zip files onto your sdcard
3. Enter recovery mode and do a wipe data/factory reset
4. Flash in this order:
First the cyanogenmod image (e.g. cm-10.1-20130325-UNOFFICIAL-p4wifi.zip)
Then the ubuntu image (this may take a while)
5. reboot
fix screen pixel ratio (this will become obsolete once the config file is included by default):
1. download p4wifi.conf: http://ubuntuone.com/688wubidavYnvfKvBWV7cY
2. copy p4wifi.conf into /etc/ubuntu-session.d/
3. reboot
Unlocking instructions
link to images
1. Ubuntu stuff:
Current: http://cdimage.ubuntu.com/ubuntu-to...urrent/quantal-preinstalled-phablet-armhf.zip
2. CyanogenMod image:
Current: http://ubuntuone.com/6V0ZxZ8cqB2AGcF8nImrDV
*Note: I am not involved with the development and I do not own this project, for more details please go to the link below.
https://wiki.ubuntu.com/Touch/Devices/p4wifi

Thanks, friend! I'm gonna test it soon :good:

AW: Official Ubuntu Touch for Galaxy Tab 10.1 is here!
I tried it. Installation worked fine and the first start (reboot after install) also went fine. Can't test more things than boot up right now - no time so far. I'll have a look this evening.
But why are there already users exsisting an how do i log in?
Sent from my One S using xda app-developers app

They say it's a test-only version and you can only log in to guest account...
and if you read the ubuntu-part file's name it is "quantal-PREINSTALLED", which means it is an installed image of Ubuntu that was tested on some previous devices by Ubuntu devs...
it's my thought, though...

AW: Official Ubuntu Touch for Galaxy Tab 10.1 is here!
Yes. It's a tech demo. But it already looks nice. I hope development goes on quickly.
Sent from my One S using xda app-developers app

customromfan said:
Yes. It's a tech demo. But it already looks nice. I hope development goes on quickly.
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
I'm testing this now, but I cannot find /etc/ubuntu-session.d/

Wifi not working after returning image back to Cyanogenmod
I followed your instructions and got Ubuntu touch working. After playing around with it for a while I decided to go back to my Cyanogenmod rom. For some reason now I cannot turn on the wifi. It is the same image that was working before. Can you offer some advice or assistance?
Thanks

Can someone make a video of this running? I want to do it myself but can't find the 10.1's charger

GazaIan said:
Can someone make a video of this running?
Click to expand...
Click to collapse
I've installed it with no problems, just followed the instructions in the first post...
I'm now attempting to get screen pixel ratio fixed and wifi running, and then will upload a video to youtube (probably in the next few hours)

Sorry, but I just can't find etc\ubuntu-session.d\ and can't make a persistent local directory in /data/ ...
If anyone can help me with these problems, please tell me...
(I chmodded the userinit.sh file for wifi and tried to fix the screen pixel ratio, but couldn't find or create the directories to put them)...
I'll upload a video anyway...

Dingles666 said:
I followed your instructions and got Ubuntu touch working. After playing around with it for a while I decided to go back to my Cyanogenmod rom. For some reason now I cannot turn on the wifi. It is the same image that was working before. Can you offer some advice or assistance?
Thanks
Click to expand...
Click to collapse
Not sure why you're having this problem. Maybe try format everything before flashing back or use a nand backup if you have one?

I think we must put the p4wifi.conf into ubuntu-session.d folder in the quantal before we install the image, right?
The proof I can provide is that there are folders named ubuntu-session.d and data in the quantal, but they're extracted to somewhere else during installation...
Video coming soon...

arashtarafar said:
Sorry, but I just can't find etc\ubuntu-session.d\ and can't make a persistent local directory in /data/ ...
If anyone can help me with these problems, please tell me...
(I chmodded the userinit.sh file for wifi and tried to fix the screen pixel ratio, but couldn't find or create the directories to put them)...
I'll upload a video anyway...
Click to expand...
Click to collapse
My memory is a bit vague on this, but I think it's in the /ubuntu folder, as well as the rest of the filesystem. It confused the hell out of me when I had it on my Sensation, it seemed like there was an entire filesystem at the root of the storage, then another inside /ubuntu where everything seemed to be.
You could use the search in Nautilus to find it as well, just make sure it's searching all subdirectories

I had a problem adding the p4wifi.conf file to /etc/ubuntu-session.d/ folder. This is how I solved it.
My problem basically was that when using adb shell to access the device I was inside the android system. And you need to get inside the ubuntu-system.
My way to get shell access to the ubuntu-system was the following:
>adb root
>adb shell
You should now see something similar to [email protected]:/ #
Then enter:
>ubuntu_chroot shell
You should now see something similar to [email protected]:/#
You are now in the ubuntu-system.
to get the p4wifi.conf file into /etc/ubuntu-session.d I did the following:
>cd /etc/ubuntu-session.d
>echo -e "GRID_UNIT_PX=10\nQTWEBKIT_DPR=2.0\nFORM_FACTOR=\"tablet\"" | sudo tee p4wifi.conf
For some reason there is a space between " and tablet. This space should be removed! It seems as if the forum adds it when rendering my post.
Now for the changes to take effect you will need to reboot your device. You can do that by writing the following
>reboot
I hope this helped someone that just as me struggled to get the pixel-ratio fix applied to the system.

Thanks, my friend.
I'm gonna try this and then will upload a video...
if we can find the way to fix WiFi according to this post:
http://forum.xda-developers.com/showpost.php?p=38988110&postcount=44
it will be awesome!
thanks again

arashtarafar said:
Thanks, my friend.
I'm gonna try this and then will upload a video...
if we can find the way to fix WiFi according to this post:
http://forum.xda-developers.com/showpost.php?p=38988110&postcount=44
it will be awesome!
thanks again
Click to expand...
Click to collapse
Yeah I read about this post too, I'm a bit busy this week but maybe I'll try it out this weekend.

I finally fixed screen pixel ratio by flashing the .zip package linked in post 15 in this thread ... simply adb push it and flash using CWM (ubuntu won't erase CWM after being flashed)...
I'm now going to fix WiFi to upload a video that's worth seeing ...

arashtarafar said:
Thanks, my friend.
I'm gonna try this and then will upload a video...
if we can find the way to fix WiFi according to this post:
http://forum.xda-developers.com/showpost.php?p=38988110&postcount=44
it will be awesome!
thanks again
Click to expand...
Click to collapse
I have tried this but no success Please share if anyone solves the wifi-issue.
---------- Post added at 03:38 PM ---------- Previous post was at 03:33 PM ----------
Does iwlist work for anyone? For me it dosen't even recognise the command.

does 3G work on this?

3G doesn't work yet, but I'm testing the OS on my galaxy tab 3G
yeah, I too have tried putting userinit.sh file in /data/loca/ with no success... but note that you must put the file using ubuntu_chroot shell... did you try that?
maybe we can put the commands in afterflash-p4.zip and then flash it, like the way we solved the screen pixel ratio issue...
inform us if this method worked for you

S7 EDGE reboot everytime µTorrent is launched

Hi Guys,
I have a weird problem with my S7 Edge, everytime I launch µTorrent my phone reboots few minutes after
Can anyone help please
Thanks in advance

Logcat maybe?
But thinking logically, if its a reboot, does it have some Permission issues and is causing the device to crash?
Your asking abit of a needle in a haystack unless this is a common issue, If you can post the Logcat we can get an idea why its crashing / rebooting

dave7802 said:
Logcat maybe?
But thinking logically, if its a reboot, does it have some Permission issues and is causing the device to crash?
Your asking abit of a needle in a haystack unless this is a common issue, If you can post the Logcat we can get an idea why its crashing / rebooting
Click to expand...
Click to collapse
Thanks Dave
What's a Logcat please? please show me how to do and I will share it

The_Warchitect said:
Thanks Dave
What's a Logcat please? please show me how to do and I will share it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1726238
Or google how to extract Logcat android
(The System Log file)
There is alot of Apps on the Play-store that will also extract this for you.
Just search google play "Logcat"
Ideally you want to capture the log straight after a boot when the crash / reboot occurred.

Will do that immediately

Here it is

I launched it again and my phone rebooted a second time log attached

I'm no expert but there's something with the install of AppCompat.

CrEaTiiOn_187 said:
I'm no expert but there's something with the install of AppCompat.
Click to expand...
Click to collapse
What's AppCompat please? is there a way to fix this?

The_Warchitect said:
What's AppCompat please? is there a way to fix this?
Click to expand...
Click to collapse
As i said i'm no expert but it seems that that is your problem. It tries to install it but it can't 'cause there's already a factory one. Don't know what it is though.

dave7802 said:
http://forum.xda-developers.com/showthread.php?t=1726238
Or google how to extract Logcat android
(The System Log file)
There is alot of Apps on the Play-store that will also extract this for you.
Just search google play "Logcat"
Ideally you want to capture the log straight after a boot when the crash / reboot occurred.
Click to expand...
Click to collapse
I just upload to logs
Can you help please
Many thanks in advance

Here is another one