So I was able to build FFOS from source today, ran flash.sh and was able to boot and play with it. I would like to make CWM flashable zips so I can make changes and just flash the zips when I am ready. Can anyone here point me in the right direction?
I have ran
Code:
./build.sh target-files-package
but that doesn't flash via recovery.
Any tips are greatly appreciated. I will upload the ROM as soon as I figure out the best way to distribute it.
Related
I can't post in the development forums so I figured I would ask here:
I understand how to use adb and fastboot, etc.. What I am missing is with the new ICS ROM it states that I must "fastboot flash system system.img"; however none of the ICS zip file I have seen come with a system.img file (just the boot.img).
Am I missing something? Any help would be greatly appreciated..
I used the version available on Rootzwiki... not sure if thats the answer you wanted. I'm running 4.0.3 ICS on my wifi XOOM OC to 1.54. No FC's, reboots or anything of the sort. You'll need to be sure that you have su-install.zip, and other img files needed. As I said, you'll find them all on the rootzwiki website under xoom hope this helps, if not good luck.
You are talking about two different things here. I don't know where to start here you're all mixed up. There are several ways to flash a ROM, you can fastboot flash the .img files such as what you are referencing to. Or you can flash an update .zip file from recovery. The way you flash the ROM depends on the source, if its a bunch of *.img files you use fastboot, if it's a *.zip file you use recovery. Just follow the directions given for installation that are provided with the ROM you are downloading.
sboehler said:
I can't post in the development forums so I figured I would ask here:
I understand how to use adb and fastboot, etc.. What I am missing is with the new ICS ROM it states that I must "fastboot flash system system.img"; however none of the ICS zip file I have seen come with a system.img file (just the boot.img).
Am I missing something? Any help would be greatly appreciated..
Click to expand...
Click to collapse
Hello, and welcome to XDA! =] Anyways on with your question. There are two ways to flash a ROM to your xoom. One being fastboot/adb, where you use the command line on your computer to send commands to your device and make it do stuff. This is where you use system.img, boot.img, recovery.img.
The second, is CWM (ClockWorkMod recovery) This, as far as im aware, is the most common way. This is where the .zip's come in. Because you take the .zip you put it on your external SD card. boot into recovery (after flashing CWM of course) and flash the rom. CWM is nice because you can also make a 100% snapshot of your internal memory state via making a nanodroid back up. That way if anything messes up you have a 100% backup you can restore at anytime if you need it.
In a nutshell, You use *.img files with fastboot and .zip files with CWM.
Anyways. If you're new to rooting. Please check out these two threads, They'll help you get started. =]
Xoom Heaven: Root+Non Root Users Are Welcome!
[Guide] Setting up and using adb/fastboot-unlock, flash custom recovery & root
The second guide I did use to flash my own zoom so I can assure you it does work.
Hi,
I don't know if this is the correct section to get this question answered, but I'll try:
I have a new tablet, which is not really known at the moment. I managed to root it and next step would be to port Clockworkmod Recovery to it. Since I only found guides where I always have to repo sync the entire CyanogenMod github (which is 19GB+ as I heard), I searched for an alternative where I could save some traffic
I found a clockworkmod recovery from another tablet and wondered if it was just possible to unpack it, modify the recovery.fstab and repack it again.
Is this possible or do I have to modify more than the recovery.fstab? If yes, could you point me to the right direction?
Regards
dump your stock recovery
unpack the stock recovery and save the vold.fstab somewhere.
upload the stock recovery here
http://builder.clockworkmod.com/
get the output and flash`it
if the key`s are not working, unpack the new cwm, and the old recovery, and put the keys from the old recovery.
if you get some mount points erros, you will have to upload also the saved vold.fstab on the clockwork site when you cook the image.
if this does not offer you a good result, you will need to find a similar device (processor, resolution) that has allready a cwm, and try it
the recovery file is ramdisk/sbin/recovery
Hi,
thanks for showing me a way. Unfortunately builder.clockworkmod.com says it didn't find Android magic. This makes sense, as the image is a uImage with lzma compressed data inside. It seems koush's builder handles only "plain" recoveries...
Bad luck
I guess I'll try your second advice and search for a CWM for a similar device, unpack it, replace the fstab file and repack it again.
Thanks again!
hello I have made the porting on http://jenkins.cyanogenmod.com/job/recovery/lastBuild/console
I end up having a zip archive, how can I make my tablet to read that. I have installed cwm recovery and it is rooted. Let me know how can install it and replace my recovery with this.
BTW I have the original stock firmware of my tablet.
let me know thanks
Every single one of the roms I've tried to install have failed during installation and have all said Zip corrupt. Any idea why this keeps happening? Is there another way to install these roms other than twrp and cwm. Could the transfer method of the Rom files have anything to do with the corrupt zips? I would greatly appreciate any helpful input from anyone.
@twistedshellz: before flash, check md5sum of downloaded zip and compare it with the one on downloadsite. If they differ, try another modem /pc /smartphone for downloading
How would I go about if I want to create my own rom based on the latest samfirm/updato rom?
I have this far downloaded one for s7edge. Unpacked the first zip so I get AP/BL and so forth. I've then unpacked the BL and managed to unpack the boot loader stuff so I have kernel an ramdisk by them self. I then unpacked the ramdisk.. But how do I go on to make this a flashable rom? Preferred is to replace or remove the recovery so I can preserve TWRP. I've done all this so far to get a flashable stock rom that doesn't enforce encryption.. If I get all working I might do more stuff with it
Any help or pointers appreciated!
Has anyone compiled twrp recovery? I don't care if it old. It just needs to be flashable via odin and actually works (I don't know whether the stock ROM will overwrite twrp). Also, before you ask me to compile it myself, I do not have Linux, nor am I experienced enough other than ability to restore and flash ROMs and figure something out (but with some instructions). SO DO NOT ask ME to COMPILE it!