Related
Prerequisites have...
A:android-sdk-windows installed
B: (on your phone) go to menu>settings>applications>developement and make sure usb debugging is checked.
C: the file you are pushing must be placed in the tools folder of adb so if you are pushing file "build.prop.txt" this needs to be downloaded/copy and pasted in C:\android-sdk-windows\tools
1: go to run and type cmd (or just open your command prompt)
2: cd C:\android-sdk-windows\tools
3: adb remount
4: adb devices *if everything is set up right this should output a serial number*
5: adb push FFFFFFF.FFF /#####/###### *i hope my notes help here you need to put the file name in for the F(s) and in the pound signs you put the destination on the devices example adb push build.prop.txt /system/bin
6. repeat step 3 for multiple files
7. adb reboot this is how you finish
usadevil7193 said:
hi mate...i m new to android..i own a nexus1..hav rooted without unlockin d bootloader..i am tryin to push d track ball to wake mod...evry time i type adb remount it says permission denied..any ideas to get things workin...???????
Click to expand...
Click to collapse
Welcome to XDA and Android! Are you trying to get help for your Nexus One? This forum here is specifically for the HTC Hero CDMA.
You will probably find better and more specific help in the Nexus One forums which are here: http://forum.xda-developers.com/forumdisplay.php?f=556
Great post, very easy to follow, thank you.
yea I'm trying to do this, over and over, but with not luck. i have sdk on my pc and im running the cmd prompt to run adb remount & devices and its not picking up the phone, wth is going on, plz help
this also works for the samsung Galaxy S in recovery mode.
mikeybonez28 said:
yea I'm trying to do this, over and over, but with not luck. i have sdk on my pc and im running the cmd prompt to run adb remount & devices and its not picking up the phone, wth is going on, plz help
Click to expand...
Click to collapse
mine shows up but then says error, device offline
hi, i have adb recognizing my phone, but i still can't seem to push the files over.... every time i try, i get 'cannot stat 'su' : No such file or directory'. i have made sure over and over to put the files in the same folder where adb is.... actually i have tried placing the files in the tools folder, as well as the platform-tools folder, and i keep getting that error when i try to push anything.
any suggestions? thx
yogi2010 said:
hi, i have adb recognizing my phone, but i still can't seem to push the files over.... every time i try, i get 'cannot stat 'su' : No such file or directory'. i have made sure over and over to put the files in the same folder where adb is.... actually i have tried placing the files in the tools folder, as well as the platform-tools folder, and i keep getting that error when i try to push anything.
any suggestions? thx
Click to expand...
Click to collapse
i had the same issue with something i was trying to push. I think you need to make sure you have exactly the same file name like caps and all. i was trying to push rootexplorer.apk and i got the same message but i then changed it to RootExplorer.apk and it work.(notice the difference in caps)
just watch this and it'll explain everything.
http://www.youtube.com/xdadevelopers
Does it matter where sdk is installed my file path is
C:\Program Files\Android\android-sdk\tools
instead of
C:\android-sdk-windows\tools.
I just installed it in the default location.
I type adb remount and get the not recognised command.....
Thanks.
I don't think my phone is being picked up?
{LCD}Stelios said:
Does it matter where sdk is installed my file path is
C:\Program Files\Android\android-sdk\tools
instead of
C:\android-sdk-windows\tools.
I just installed it in the default location.
I type adb remount and get the not recognised command.....
Thanks.
I don't think my phone is being picked up?
Click to expand...
Click to collapse
Make sure your have the drivers for your phone installed first of all.....Then, in your command prompt you have to change directories to the sdk (which you made harder by not installing to C:\
Try: cd Program Files\Android\android-sdk\tools
Then type: adb devices
That should return "xxxxxxdevice" connected....Then you know you have it set up.
Look in kyouko sig he has all the commands for adb
Sent from my HERO200 using XDA App
Bierce22 said:
just watch this and it'll explain everything.
http://www.youtube.com/xdadevelopers
Click to expand...
Click to collapse
great video arse....thanks for the help donkey
Flashing fresh ROM via ADB in Linux
Hello there.
M volumeUp and VolumeDown buttons are broken on my rooted Desire HD, so I cannot go through CWM any longer.
With regard to this post, I would ask the followings:
1) can this method be used to flash a new ROM (i.e. Coredroid, Leedroid..) without the need of those 2 buttons ?
2) My PC runs Linux. How does it work with this O.S. ?
Thanks
paolo
pacut said:
Hello there.
M volumeUp and VolumeDown buttons are broken on my rooted Desire HD, so I cannot go through CWM any longer.
With regard to this post, I would ask the followings:
1) can this method be used to flash a new ROM (i.e. Coredroid, Leedroid..) without the need of those 2 buttons ?
2) My PC runs Linux. How does it work with this O.S. ?
Thanks
paolo
Click to expand...
Click to collapse
There is a thread somewhere on how to flash without a SD card and flashed using adb I believe, but don't take my word for it. Adb works fine with Linux, just have to set it up differently. Look in my sig and select the compile aosp on Ubuntu one and follow instructions on getting the USB set up.
Sent from Dorian's HTC Hero CDMA
Yes, I saw it. It's http://forum.xda-developers.com/showthread.php?t=911228
The fact is...still have to navigate through menu via VolumeUp/volumeDown buttons
Maybe through ROM manager, premium, I can install ROM direclty.
I am gonna trying
YES ! It works !
Hi I need help. I accidentally wipped my phone in CWM and now I'm trying to use adb push to push the update.zip into my phone sd everything seems to work but then in CMW it says there are no files..
any suggestions?
[Edit]
nevermind
I kept trying different locations
not sure which one did the trick but I'll list the one's I tried
so \update.zip /sdcard/
.... /sdcard/update.zip
(note I put "/update.zip" thinking maybe it needed to be reallocated to the same file/destination
Can i use adb push *.apk /system/app to push several files at once, and then repeat but using *.odex instead of *.apk? I keep ending up getting the same error, and i want to find out which app is messing with me...
rulermon said:
Prerequisites have...
A:android-sdk-windows installed
B: (on your phone) go to menu>settings>applications>developement and make sure usb debugging is checked.
C: the file you are pushing must be placed in the tools folder of adb so if you are pushing file "build.prop.txt" this needs to be downloaded/copy and pasted in C:\android-sdk-windows\tools
1: go to run and type cmd (or just open your command prompt)
2: cd C:\android-sdk-windows\tools
3: adb remount
4: adb devices *if everything is set up right this should output a serial number*
5: adb push FFFFFFF.FFF /#####/###### *i hope my notes help here you need to put the file name in for the F(s) and in the pound signs you put the destination on the devices example adb push build.prop.txt /system/bin
6. repeat step 3 for multiple files
7. adb reboot this is how you finish
Click to expand...
Click to collapse
Hey guys ...
I have also rooted my phone , everything was OK until one day i tried to write something to /system/app and i recieve this error:
in Addition , i am writing "adb shell" and it shows me $
if i am doing adb shell --> $ --> su --> it shows #
Can some1 knows what is the problem?
Hey Boys and Girls,
where i can find an manual to root the tattoo with a mac?
sorry, i have search for this, but i cant find information for this
I don't thing that there is a difference.
As soon as you have SDK installed and adb works, the commands are the same.
hi,
i'm also doing all the rooting process from mac, just put the directory contain 'adb' shell into your home/user places and executing it with 'terminal'..
Same here, using a Mac ever since and also using it for Android development. Due to the underlying Unix core of OS X you just have to follow the steps as described for Linux. If it's just adb commands it's the same on every platform anyway.
You might want to add a
Code:
export PATH=${PATH}:/Users/yourusername/android.sdk/tools
to your .bash_profile file in your home folder so you don't have to cd to the SDK tools folder everytime. Happy rooting!
Mod. edit: not dev related, moved to general
Okay thanks for yours answers but i'm a newbie.
the background story is, I want to edit the boot.mp3. Because the startsound is really annoying
So i have download SDK, open the terminal and switch to usb-debbugging mode on my tattoo.
And now? sorry, I'm still missing a few knowledge
thanks for your help
well just use the various adb commands in Terminal Just type in "adb", press enter and you'll get a list of all possible commands. Assuming you've added the path to your sdk tools folder to your bash profile. Otherwise just drag & drop the adb binary from the tools folder onto your Terminal window, et voila.
The most used commands are probably push and pull where you can, well, push stuff to your phone or pull it to your computer.
So if you want to modify the boot.mp3 you would pull the original from the phone to your computer, modify it and push it back, overwriting the original file. In Terminal speak: ;-)
adb pull /system/media/bootscreen/boot.mp3
adb push /path/to/boot.mp3 /system/media/bootscreen/boot.mp3
Please note depending on the ROM you're using the paths may be different. To browse the device via Terminal type in "adb shell" and make a simple "ls" to list the directories, "cd" to change directories etc.
Or if you just want to use another mp3:
adb push /path/to/whatever.mp3 /system/media/bootscreen/boot.mp3
Again, on the Mac you can just drag & drop files onto the Terminal to get their full Unix paths like to your custom mp3
Thanks a lot. i love it its really simple
and now i have load and edit the the boot.mp3. But i can't push it to my tattoo, because i can only read but not write
I have tried to root my phone with "adb root" but it is the message "adbd cannot run as root in production builds"
Terminal: "adb remount", then push again
damn the next bad message "remount failed: Operation not permitted"
You need to root your phone first.
http://forum.xda-developers.com/showthread.php?t=637927
Okay i have executed the instructions. But I've stop at this part:
You should get something like this:
Code:
# id
uid=0(root) gid=1000(shell) groups=1003(graphics),1004(input),1007(log),1011(adb),1015(sdcard_rw),3001(net_bt_admin),3002(net_bt),3003(inet)
uid=0(root) is important.
Click to expand...
Click to collapse
Yes i've root but i'cant download the "su binary" because its doesnt exist.
But its absolute essential to need the "su binary" to only copy the boot.mp3 to my phone? Or there is an other way? What are the commands to push the boot.mp3 back to may tattoo then i'm in the root mode like >> "#".
okay hope you understand me
You need "su" to do root stuff... no other way.
Download the package from 1 click root thread and find "su" there...
http://forum.xda-developers.com/showthread.php?t=644279
now, i have install the su binary. Then i does this command
user:~ user$ /Users/user/android-sdk-mac_86/tools/adb shell
$ /data/local/bin/su
#
Click to expand...
Click to collapse
And now? Is there a comand to push the boot.mp3 back to the phone in this mode >> "#" ?
I have try to open an new terminal window and type
adb push /path/to/boot.mp3 /system/media/bootscreen/boot.mp3
Click to expand...
Click to collapse
but the answer is
failed to copy '/Users/android-sdk-mac_86/boot.mp3' to '/system/media/bootscreen/boot.mp3': Permission denied
Click to expand...
Click to collapse
and adb remount doesnt work to
You also need tattoo-hack.ko file and do insmod tattoo-hack.ko to make /system writable.
Or even better... flash custom amon_ra recovery image and then a custom rom with all this already included.
Mine for example http://forum.xda-developers.com/showthread.php?t=702401
It doesnt have boot sound enabled
Okay thank you very much.
now it was successful
So, I've been trying to force over the 4.2 update to my N7 with adb. And every time I try to sideload the update, I get "adb cann't ready sideload"
I don't understand why it won't work. Every other adb command works fine. I'm on rev. 21 for sdk tools and 16 for platform tools. I literally just downloaded the SDK.
Any ideas?
UpsideDownAce said:
So, I've been trying to force over the 4.2 update to my N7 with adb. And every time I try to sideload the update, I get "adb cann't ready sideload"
I don't understand why it won't work. Every other adb command works fine. I'm on rev. 21 for sdk tools and 16 for platform tools. I literally just downloaded the SDK.
Any ideas?
Click to expand...
Click to collapse
I've been wondering the same thing.... No one seems to know or care to help. Bump this post...
uncleswoop said:
I've been wondering the same thing.... No one seems to know or care to help. Bump this post...
Click to expand...
Click to collapse
Just to be sure, you've apply sideload from adb in the recovery, correct?
ducatic said:
Just to be sure, you've apply sideload from adb in the recovery, correct?
Click to expand...
Click to collapse
I'm in the same boat! I tried, today, several times to sideload the update but I'm constantly getting the cannot read sideload error message. I guess I'm off to other sites to see what the fix is.
I had this problem too, but solved it this way:
Place the file you're trying to sideload is in the same adb directory, f.i. C:\Android
And when in the CMD window, change the active directory to this directory before you type: adb sideload [name of file]
So:
- run CMD window
- change your active directory to adb C:\Android
Code:
cd\
cd android
- type:
Code:
adb devices
(List of devices should indicate a number of the connected device)
- type:
Code:
adb sideload [name of file]
YES! i have found the solution. i just registered to share it to anyone with the same problem. i spend HOURS and HOURS, literally sweat and frustation like i've never experienced before to update this POS. i was ready to smash my one week old Nexus 7.
the solution is so simple and stupid that i want to smash my forehead on my keyboard.
i was using this video as a guide to manually update the N7 youtube /watch?v=iQhyerPfGes
what it doesn't say is that you DON'T HAVE TO UNZIP THE FIRMWARE!!!
You have to issue the command from the platform-tools folder (or the directory in which adb.exe resides). Right-click n the folder window and choose "open command prompt here." Then type
adb sideload 094f6629314a.signed-nakasi-JOP40C-from-JZO54K.094f6629.zip
Click to expand...
Click to collapse
remember, don't unzip the firmware
my Nexus 7 still doesn't finish the update because it say something about an error, but that's another problem
but at least i'm not getting "cannot read sideload" anymore :laugh:
I might be just an idiot but why are you guys trying to SideLoad a system update?
AFAIK... sideload is merely to install apps into your rom that Jellybean or the Playstore doesn't like.
I think you guys want to use "ADB Fastboot" commands instead. Get a guide before you attempt to do this though. I used Wugs Toolkit to install the bootloader from 4.2.2 update.
fede01_8 said:
what it doesn't say is that you DON'T HAVE TO UNZIP THE FIRMWARE!!!
Click to expand...
Click to collapse
:laugh: true
For clarity:
- adb sideload can used for installing zip updates from PC, as an alternative for using the ROM/recovery manager on your tablet/phone.
Code:
adb sideload update.zip
- fastboot flash is used for installing img files to a specific partition (boot, recovery, system)
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fac851 said:
I had this problem too, but solved it this way:
Place the file you're trying to sideload is in the same adb directory, f.i. C:\Android
And when in the CMD window, change the active directory to this directory before you type: adb sideload [name of file]
So:
- run CMD window
- change your active directory to adb C:\Android
Code:
cd\
cd android
- type:
Code:
adb devices
(List of devices should indicate a number of the connected device)
- type:
Code:
adb sideload [name of file]
Click to expand...
Click to collapse
Thank you!!! Spending hours trying to figure it out, so simple. Although not sure why the toolkit didn't work, but using CMD did work.
fac851 said:
I had this problem too, but solved it this way:
Place the file you're trying to sideload is in the same adb directory, f.i. C:\Android
And when in the CMD window, change the active directory to this directory before you type: adb sideload [name of file]
So:
- run CMD window
- change your active directory to adb C:\Android
Code:
cd\
cd android
- type:
Code:
adb devices
(List of devices should indicate a number of the connected device)
- type:
Code:
adb sideload [name of file]
Click to expand...
Click to collapse
fede01_8 said:
YES! i have found the solution. i just registered to share it to anyone with the same problem. i spend HOURS and HOURS, literally sweat and frustation like i've never experienced before to update this POS. i was ready to smash my one week old Nexus 7.
the solution is so simple and stupid that i want to smash my forehead on my keyboard.
i was using this video as a guide to manually update the N7 youtube /watch?v=iQhyerPfGes
what it doesn't say is that you DON'T HAVE TO UNZIP THE FIRMWARE!!!
You have to issue the command from the platform-tools folder (or the directory in which adb.exe resides). Right-click n the folder window and choose "open command prompt here." Then type
remember, don't unzip the firmware
my Nexus 7 still doesn't finish the update because it say something about an error, but that's another problem
but at least i'm not getting "cannot read sideload" anymore :laugh:
Click to expand...
Click to collapse
I've tried both of these, I still get the cannot read sideload FML why is this keep happening? :crying:
teaclarke said:
I've tried both of these, I still get the cannot read sideload FML why is this keep happening? :crying:
Click to expand...
Click to collapse
I was getting that message because my zip file already was a zip file and I named the file update.zip. Had to remove .zip from the file name then it worked.
brandnewyc said:
I was getting that message because my zip file already was a zip file and I named the file update.zip. Had to remove .zip from the file name then it worked.
Click to expand...
Click to collapse
This is what got me on the right trail. I opened the command prompt, navigated to the correct folder, used the sideload command and copied the name of the update file into the command prompt window, but it wasn't until I appended it with the .zip extension that it finally worked.:victory:
Hey guys! I don't have the sideload problem anymore, but, I get this error. cannot read '(name of file).zip'
I am either really dumb or this isn't working! I have it connected to adb device number and all working fine. I have the zip in platforms-tools cmd window opened etc. when i go to adb sideload and then top of cmd window edit paste the name of the file add .zip and it says can not read file!
Please help!!
Same problem...fixed
I had the same cannot read sideload problem.
The problem was when I renamed the update package (so i don't have to type in the ridiculously long file name), i renamed it as "kk.zip".
Because this was done in windows, the file system recognized it as "kk.zip.zip".
Just rename the file without ".zip" (just "kk")
then try again - in my example: adb sideload kk.zip
it works~
jihoon526 said:
I had the same cannot read sideload problem.
The problem was when I renamed the update package (so i don't have to type in the ridiculously long file name), i renamed it as "kk.zip".
Because this was done in windows, the file system recognized it as "kk.zip.zip".
Just rename the file without ".zip" (just "kk")
then try again - in my example: adb sideload kk.zip
it works~
Click to expand...
Click to collapse
So I had a similar experience. when I tried to use
Code:
adb push
, it would say error:closed. This was weird since the device showed up when I ran
Code:
adb devices
.
When I tried to do
Code:
adb sideload xxx.zip
I would get the
Code:
cannot read sideload
error. I have Windows set to show file extensions, but decided to rename the file and remove the extension. Then I renamed it again and re-added the extension. After that, sideload worked like a charm. I have no idea what changed (if anything), but it worked for me!
Fix
For me all that worked was using an aosp for the sideload, and then copying the real rom once I had android booted.
hkleiner said:
For me all that worked was using an aosp for the sideload, and then copying the real rom once I had android booted.
Click to expand...
Click to collapse
are you on the same directory as your file?
teaclarke said:
I've tried both of these, I still get the cannot read sideload FML why is this keep happening? :crying:
Click to expand...
Click to collapse
Try addind ".zip" at the end of the file name in CMD. So if the name in the directory is ROM, type into cmd "adb sideload ROM.zip"
DigitalOSH said:
So I had a similar experience. when I tried to use
Code:
adb push
, it would say error:closed. This was weird since the device showed up when I ran
Code:
adb devices
.
When I tried to do
Code:
adb sideload xxx.zip
I would get the
Code:
cannot read sideload
error. I have Windows set to show file extensions, but decided to rename the file and remove the extension. Then I renamed it again and re-added the extension. After that, sideload worked like a charm. I have no idea what changed (if anything), but it worked for me!
Click to expand...
Click to collapse
oddly this helped me a lot with another device. i was having the exact same problem and found this topic in searching for a solution. but after removing the extension, renaming, then renaming and re-adding the extension it worked. i also had to type adb sideload fielanme.zip.zip to get it working.
HOW TO ROOT YOUR LENOVO IDEATAB A1000
<DISCLAIMER>
By attempting these steps, your warranty will be void. Even worse than that, it might cause crashes, freezes, random explosions, 2nd degree burns, or even turn your beloved tab into $100+ paperweight. What works on mine might not work on yours, so don't attempt if you don't know what you're doing. Do at your own risk. Corrections are welcome. I must admit that I'm not an expert, so any info I posted might be wrong, and I can't offer you much help. I'm not responsible for anything arising from the use of this how-to. I can only wish you good luck.
<WHY ROOT?>
- Without root or OTA upgrades (at time of writing, Indonesian customers still can't get it), you'll be stuck with ~500MB internal memory. That's annoying.
- You're stuck with the default IO scheduler (cfq) and governor (hybrid, haven't heard that one..)
- You have an incredibly large amount of bloatware you can't get rid of, in that already cramped up internal storage
- Did I mention freedom?
<REQUIREMENTS>
This method is originally used to root Acer Iconia B1-A71. Somehow I noticed that the two actually has the same chipset, MTK8317 (if it really was relevant ). So I tried the method, and through sheer n00b's luck, it worked like a charm!
Lenovo IdeaPad A1000-G --> 4GB storage, 2G/EDGE. This method haven't been tested on A1000-T/F, different storage cap (16GB, etc.) or other variants, but it should work with slight modification. Screenshots of my specs are attached below. Remember, proceed at your own risk!
A Linux System. Never tried on Windows or Mac. I personally used Linux Mint 15. The source post uses Ubuntu.
working ADB (android-tools-adb). You can get this from synaptics, apt-get, etc. If your system can detect adb devices, you should be fine.
Superuser Binary
Busybox Binary (You can get these two from the links on original post. XDA says noobs can't post links :'( )
ORIGINAL THREAD
<CREDITS>
XDA Senior Member entonjackson, for writing such a noob-friendly how-to for rooting Acer Iconia B1-A71 and for allowing me to use it for this how-to.
XDA Member alba81, for discovering the method as acknowledged on the original post by entonjackson
All awesome gurus on XDA which I can't mention one by one.
<THE STEPS>
1. Extract the android sdk to your home folder, e.g. a user named Bob will use like /home/bob
2. Open a terminal
3. Now plug your A1000 into your machine and turn on Debugging Mode (Go into Settings -> Developer Tools, turn on Developer tools, then turn on USB Debugging Mode)
4. Now back at the keyboard of your Linux machine in your terminal type:
Code:
sudo adb devices
The output should be something like:
Code:
123456789ABCDEF device
If it's not, google for it. Somehow your Linux hasn't detected the A1000, although the android sdk for Linux brings all needed drivers with it.
If your device was found, congratulations. The adb connection between your linux machine and your tablet is intact.
5. Now extract the downloaded busybox archive to your home folder, in it there should be a busybox binary. So Bob does:
Code:
sudo ./adb push /home/bob/busybox /data/local/tmp
Code:
sudo ./adb shell
Code:
chmod 755 /data/local/tmp/busybox
6. You should copy the busybox binary into a directory where you can access it as a plain non-root user on the tablet. We need this binary. so we can apply unix tools like telnet, dd, cat, etc. But for now we need it to establish a telnet session between our tablet and our linux machine.
(This point is written on original post. Seems important, but as soon as I finished step 5, I can use those tools)
7. Dial *#*#3646633#*#* to enter Engineer Mode
8. Go to Connectivity -> CDS Information -> Network Utility
9. type the following command:
Code:
/data/local/tmp/busybox telnetd -l /system/bin/sh -p 1234
Advice from original poster: copy and paste it from the browser on your tablet, because dependent on which keyboard app installed, this can be freakin tricky. In the next step you will learn, why it's so important why this command should be correct.
10. Tap on Run. You won't get any feedback, so you will never know if the entered command runs properly or not. That's why you should make sure the command is ok.
Now we have started our telnet server on the tablet.
11. Back in the terminal type:
Code:
/data/local/tmp/busybox telnet 127.0.0.1 1234
If you now get an error like couldn't find busybox or something, then either adb push failed or you forgot to chmod, in step 5
12. Now enter:
Code:
cat /proc/dumchar_info
You should get a bunch of lines, try to find a line containing the partition named android
{..... partition list .....}
android 0x0000000028A00000 0x00000000020E8000 2 /dev/block/mmcblk0p3
{..... partition list .....}
13. We will create a dump of our android system. This is the point where different variants *MIGHT* have different parameters. This step is important, as wrong parameter will result in unmountable image.
Stop. Take a deep breath. If you're not familiar with dd, find a good doc of it. There's a plethora of them.
Get yourself a programmer's calculator (Linux Mint 15 has one built in).
Here's what you'll do :
Convert the hex number on the 3rd column into decimal. In my case (0x20E8000) will yield 34504704. Divide by 4096. The result (8424) goes to the skip parameter.
Convert the hex number on the 2nd column. In my case (0x28A00000) will yield 681574400. Divide by 4096. The result (166400) goes to the count parameter.
So the full dd command will look like :
Code:
dd if=/dev/block/mmcblk0 bs=4096 skip=8424 count=166400 | gzip > /cache/system.img.gz
Do a full sanity check before hitting enter! It will take about 5 minutes.
14. After it's finished we must make the image readable for adb, so we do:
Code:
chmod 777 /cache
and
Code:
chmod 777 /cache/system.img.gz
15. Leave the telnet, and then adb shell session by:
Code:
exit
Code:
exit
16. Now we pull our image by
Code:
sudo adb pull /cache/system.img.gz
wait 1-2 minutes.
It should be then located inside /home/bob. It did for me. If not, do a search . It should be a .gz, extract it right there (or /home/bob if it isn't there)
17. Now we need to modify our system image by adding the tiny but helpful su binary. Extract the SU binary to /home/bob.
18. We create a folder where we will mount our system image to. To create it do:
Code:
sudo mkdir /media/a1000
19. Now we mount it:
Code:
sudo mount -o loop /home/bob/system.img /media/a1000
if it fails, then you entered wrong parameters on step 13
20. Now we copy our SU binary to our mounted system image:
Code:
sudo cp /home/bob/su /media/a1000/bin
21. the su binary needs to have the proper rights to make it usable, so we 'suid' it with:
Code:
sudo chmod 06755 /media/a1000/bin/su
22. Let's unmount our baby by:
Code:
sudo umount /media/a1000
and because bob doesn't like a messed up system, he does:
Code:
sudo rm -rf /media/a1000
because he hopefully won't need it anymore.
23. We have to gzip it again to bring it back to where it belongs to. this we do by:
Code:
cd /home/bob
Code:
gzip /home/bob/system.img
24. So here we are now, we made it to the final Boss fight! The next steps are dangerous and should be performed with caution. We copy back our modified system image, which can brick your device, if you do a mistake! Enter adb shell again :
Code:
sudo adb shell
25. Remove the old boring image:
Code:
rm /cache/system.img.gz
26. Leave adb shell
Code:
exit
27. copy our cool new system image containing the su binary:
Code:
sudo adb push /home/bob/system.img.gz /cache
28. Enter adb shell again
Code:
sudo adb shell
29. Usually the telnet server on the tablet is still running, at least in my case it's been like that. That's why we can directly connect to the telnet server with:
Code:
/data/local/tmp/busybox telnet 127.0.0.1 1234
If this doesn't work, then obviously your telnet server isn't running anymore. So on your tablet if the telnet command is still entered (see step 9), tap on Run again and repeat step 29.
30. Now this is the most dangerous step in this how to (no it wasn't the mkdir one). You can copy following command to make sure everything is fine and paste it into your telnet session on your linux terminal.
<WARNING! SANITY CHECK! MAKE SURE *ALL* THE DD PARAMETERS MATCH THE FIRST DD (STEP 13) OR YOUR A1000 WILL TURN INTO A VERY EXPENSIVE PAPERWEIGHT!>
Code:
[B]/data/local/tmp/busybox zcat /cache/system.img.gz | dd of=/dev/block/mmcblk0 bs=4096 seek=8424 count=166400[/B]
After 1-2 minutes you're done, if your tablet or pc or yourself didn't catch fire, everything's fine.
31. Leave telnet / adb shell by doing
Code:
exit
Code:
exit
32. Reboot your A1000 via ADB, then exit
Code:
sudo adb reboot
Code:
exit
33. Unplug your tablet from PC
34. Install Superuser (No, not SuperSU, cause it won't work!). I personally use Superuser by ChainsDD, from Play Store
35. Be lucky. Your tablet and thus you are now free!
Don't forget to hit thanks, if this helps
hi, after step 13 (i double checked the command), i get this error
Code:
/system/bin/sh: can't create /cache/system.img.gz: Permission denied
/dev/block/mmcblk0: cannot open for read: Permission denied
I have the WiFi 4G version
Im too stuck in step 13.....nothing wrong with the script, can u give me a solution?
Im using A1000G also
@ts
Your guide work perfectl, in windows enviroment but mount step still need linux,
I've question are you using DirectoryBinding? Mine always close when playing Real Racing, its very annoying
You have suggeztion or alternative for DirectoryBinding?
Root with Windows ?
Hi,
I am a new member because i bought this tblet but i can't root. I don't have a linux environment, so there is a solution with W8 Pro 64 ?
Thanks a lot for you help,
ulisez said:
hi, after step 13 (i double checked the command), i get this error
Code:
/system/bin/sh: can't create /cache/system.img.gz: Permission denied
/dev/block/mmcblk0: cannot open for read: Permission denied
I have the WiFi 4G version
Click to expand...
Click to collapse
have you chmod-ed the busybox (or is the chmod successful without error)? Try chmod-ing the /cache before attempting step 13. It seems that you still don't have access to the NAND device (mmcblk0). Have you updated firmware via OTA?
artonelico said:
Im too stuck in step 13.....nothing wrong with the script, can u give me a solution?
Im using A1000G also
Click to expand...
Click to collapse
Do you encounter the same error message like ulisez had? Could you post the screenshot of the partition list (the lines after you execute dumchar_info)?
rmage said:
@ts
Your guide work perfectl, in windows enviroment but mount step still need linux,
I've question are you using DirectoryBinding? Mine always close when playing Real Racing, its very annoying
You have suggeztion or alternative for DirectoryBinding?
Click to expand...
Click to collapse
I personally use Link2SD by Bulent Akpinar to link apps to 2nd partition on my SDcard.
Letsar said:
Hi,
I am a new member because i bought this tblet but i can't root. I don't have a linux environment, so there is a solution with W8 Pro 64 ?
Thanks a lot for you help,
Click to expand...
Click to collapse
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
sammymaddog said:
have you chmod-ed the busybox (or is the chmod successful without error)? Try chmod-ing the /cache before attempting step 13. It seems that you still don't have access to the NAND device (mmcblk0). Have you updated firmware via OTA?
Do you encounter the same error message like ulisez had? Could you post the screenshot of the partition list (the lines after you execute dumchar_info)?
I personally use Link2SD by Bulent Akpinar to link apps to 2nd partition on my SDcard.
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
Click to expand...
Click to collapse
Link2SD doesn't link app data, do you have any option?
yes i had same message with ulyses, by the way im from indonesia too can i contact you through chat client?
oh yeah im using windows 7 and using cmd as a terminal in linux
thx before bro
sammymaddog said:
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
Click to expand...
Click to collapse
Ok, i see his toolkit. It's very good. I'll wait
rmage said:
Link2SD doesn't link app data, do you have any option?
Click to expand...
Click to collapse
I'm not sure whether the stock kernel of our devices supports init.d, thus supports CronMod/Data2SD. Lenovo locked our bootloader, and currently there's no way around it. So I personally think, Link2SD method are the best option for now.
Let's give it several months until our dev gurus bring their miracles upon this device
The attached image shows mt6577 Hardware, can u provide the Soc details please
Hi, Can any one upload Lenovo ideatab A1000 system.img
in step 20, it appears you are writing to a /bin directory on the android system. However such a directory is not visible either through shell or the system telnet account.
Do I need to understand something else about android to make sense of this.
regards
vidya
one month gone past but the op seems to be in caves or has bricked the device
STOCK ROM
CAN ANY BODY PROVIDE ME A STOCK ROM OF THIS DEVISE
I HV ROOTED SUCCESSFULLY BY A VERY EASY METHOD
BUT SCREWED UP WHILE UPDATING IT SO PLZ PLZ HELP ME OUT
THE DEVICE BOOTS BUT ALL THE APP CRASHES :crying::crying:
VR.gtmini said:
The attached image shows mt6577 Hardware, can u provide the Soc details please
Click to expand...
Click to collapse
VR.gtmini said:
one month gone past but the op seems to be in caves or has bricked the device
Click to expand...
Click to collapse
sorry to make you wait. I'm a last grader university student, and final project stuffs have got me pinned down. Hope you understand
Actually the SoC is MT8317. For some god-knows reason Mediatek have made this SoC with signatures similar to MT6577. But somehow CPU tweaker correctly detects the SoC (MT8317). Maybe it's the CPU-Z bug?
unknown_world said:
Hi, Can any one upload Lenovo ideatab A1000 system.img
Click to expand...
Click to collapse
zod0070 said:
CAN ANY BODY PROVIDE ME A STOCK ROM OF THIS DEVISE
I HV ROOTED SUCCESSFULLY BY A VERY EASY METHOD
BUT SCREWED UP WHILE UPDATING IT SO PLZ PLZ HELP ME OUT
THE DEVICE BOOTS BUT ALL THE APP CRASHES :crying::crying:
Click to expand...
Click to collapse
I'm uploading the modified .img. Let's pray my old HSPA modem won't catch fire by the morning.
vidyadhara said:
in step 20, it appears you are writing to a /bin directory on the android system. However such a directory is not visible either through shell or the system telnet account.
Do I need to understand something else about android to make sense of this.
regards
vidya
Click to expand...
Click to collapse
I think you got it wrong. The write process does not take place on the device. It's on the loop-mounted .img in /mnt/a1000 on your computer (step 18-19). Cheers!
Here's the ALREADY BUSYBOX-ED .img for Ideapad A1000-G 4GB EDGE version. Hope it helps :
www dropbox com/s/rmpnz7c285t5sqz/system.7z
sammymaddog said:
Here's the ALREADY BUSYBOX-ED .img for Ideapad A1000-G 4GB EDGE version. Hope it helps :
www.dropbox.com/s/rmpnz7c285t5sqz/system.7z
Click to expand...
Click to collapse
Thanks for coming back, could u post the MD5 of the system.7z & system.zip.
Also could u provide simple way/steps to directly flash this .img without extracting existing stock system image
My tab A1000-G
do you have stockROM for lenovo A1000G
I need this :crying:
raffly said:
do you have stockROM for lenovo A1000G
I need this :crying:
Click to expand...
Click to collapse
Don't worry, the above link is a stock Lenovo A1000 G ROM, but with pre-root files having no superuser app. Just extract the .7z file
System.7z MD5: 658CA71AC8A230B244F267513857F9A5
I have moved this from here https://forum.xda-developers.com/pixel-2-xl/how-to/zero-day-vzw-pixel-2-xl-root-t3977851/
Hey everyone!
I am here to post some good news. I have made a set of scripts that can give you temporary root through Magisk. It persists until the next reboot, but setting it up after the initial setup is a lot easier.
The script requires that it be run as root, which means that you need to run the temproot binary provided earlier.
Big thank you to Elliwigy for walking me through the initial process and for providing the commands.
Source code for the "exploit" binary can be found here, and compiled from source if you so desire.
This script is provided with no warranty whatsoever. This script may brick your phone. YOU ARE RUNNING THIS AT YOUR OWN RISK. I ACCEPT NO RESPONSIBILITY FOR WHAT THIS SCRIPT DOES TO YOUR PHONE.
Click to expand...
Click to collapse
IF YOU DO NOT WANT TO RISK YOUR PHONE BEING BRICKED, DO NOT CONTINUE!
Requirements:
A Verizon Pixel 2 (XL) on the September 2019 Security Patch
A computer with ADB If you need ADB, it can be found here
A USB cable
Appropriate USB drivers USB drivers can be found here if needed
Some knowledge of how to use the terminal
The taimentempmagisk.zip file (attached)
The APK for Magisk Manager (included in the zip)
Hope
Magisk and MagiskManager can also be downloaded from here if you wish.
If Magisk Manager prompts you to perform additional setup, DO NOT ACCEPT. (unless you like having a bricked phone)
Install the Magisk Manager APK onto your phone
Use ADB to push the attached ZIP file (taimentempmagisk.zip) to /data/local/tmp
Open an ADB shell and navigate to /data/local/tmp
Extract the ZIP file with the unzip command
Navigate into the scripts folder
Run ./exploit (If this step fails, repeat until you have a root shell)
Run ./installtemproot.sh magiskinit64
After you have done this, you now have root!
If you reboot and want root back, just run /data/local/tmp/scripts/exploit in an adb shell, then run /data/local/tmp/scripts/temproot.sh
Enjoy your root!
Does not work
Hexlay said:
Does not work
Click to expand...
Click to collapse
I'm currently working on a solution, it seems some terminal emulators error out on the mount command.
EDIT: Instructions updated.
logan2611 said:
I'm currently working on a solution, it seems some terminal emulators error out on the mount command.
EDIT: Instructions updated.
Click to expand...
Click to collapse
I'v tried, everything went fine, however magisk still does not detect root
Hexlay said:
I'v tried, everything went fine, however magisk still does not detect root
Click to expand...
Click to collapse
did u install magisk manager? if u dont have it installed then u womt b able to grant su permissions.. it does work as we spent hours testing and ensuring it works before he posted it.. id triple check each instruction and make sure u have magisk apk installed.. if not then reboot and try again from the beginning
elliwigy said:
did u install magisk manager? if u dont have it installed then u womt b able to grant su permissions.. it does work as we spent hours testing and ensuring it works before he posted it.. id triple check each instruction and make sure u have magisk apk installed.. if not then reboot and try again from the beginning
Click to expand...
Click to collapse
Yep, i have it pre-installed, i did follow every step provided, but prompt is not showing up and afterwards it does not detect root... Well, i'v done it several times, i tried ./temproot.sh after install script, but still same...
Well, i guess i have to reboot
Edit: tried reboot, still same.... i'll write down what i have done exactly.
Rebooted dvice
Went into terminal emulator and executed ./taimen
After that went one step back with cd .. and executed chmod -R 777 scripts
Then went to pc and entered ADB shell and executed ./taimen there too, because otherwise i was getting This script must be run as root. Exiting. on install script
Then ran install script. Process did complete successfully, however no magisk prompt was fired and afterwards root was not detected
I'v tried chmod -R 777 . even from adb shell, tried opening magisk app and then doing these whole process... no luck
First, thanks for your supporting and your instruction
I just install October(6/10) update so any risk if i follow your instruction
Anyone know how to delete the update? I've downloaded and refuse to restart my device in the wake of these new development
enigma2446 said:
Anyone know how to delete the update? I've downloaded and refuse to restart my device in the wake of these new development
Click to expand...
Click to collapse
I also want to know this. I need to reboot but I don't want to move to the October patch.
Hexlay said:
Yep, i have it pre-installed, i did follow every step provided, but prompt is not showing up and afterwards it does not detect root... Well, i'v done it several times, i tried ./temproot.sh after install script, but still same...
Well, i guess i have to reboot
Edit: tried reboot, still same.... i'll write down what i have done exactly.
Rebooted dvice
Went into terminal emulator and executed ./taimen
After that went one step back with cd .. and executed chmod -R 777 scripts
Then went to pc and entered ADB shell and executed ./taimen there too, because otherwise i was getting This script must be run as root. Exiting. on install script
Then ran install script. Process did complete successfully, however no magisk prompt was fired and afterwards root was not detected
I'v tried chmod -R 777 . even from adb shell, tried opening magisk app and then doing these whole process... no luck
Click to expand...
Click to collapse
Can you post the output of the script?
logan2611 said:
Can you post the output of the script?
Click to expand...
Click to collapse
That's output every time, it finishes script successfully
Hexlay said:
That's output every time, it finishes script successfully
Click to expand...
Click to collapse
Sorry, screenshot didn't load the first time. Looks like all the files are already in place, try rebooting and running temproot.sh
running ./taimen just gives a "permission denied" error
Some1CP said:
running ./taimen just gives a "permission denied" error
Click to expand...
Click to collapse
If you are getting this on the phone, you need to use a terminal emulator with access to a directory in /data. I used Termux in my example.
If you want to use Termux, here is how to get taimen running:
Install Termux
Open Termux and let it install
Run termux-setup-storage
Push the ZIP to /sdcard/Download
On the phone, move the ZIP file from ~/storage/downloads to ~
Continue from step 4 in OP
logan2611 said:
If you are getting this on the phone, you need to use a terminal emulator with access to a directory in /data. I used Termux in my example.
If you want to use Termux, here is how to get taimen running:
Install Termux
Open Termux and let it install
Run termux-setup-storage
Push the ZIP to /sdcard/Download
On the phone, move the ZIP file from ~/storage/downloads to ~
Continue from step 4 in OP
Click to expand...
Click to collapse
How would I move it to ~ without root?
Edit: nevermind, got it to run.
Just need to figure out how to make the temproot work.
Some1CP said:
How would I move it to ~ without root?
Click to expand...
Click to collapse
In Linux ~ is a shortcut for the home directory, which is always owned by the current user. Root is not required to move the ZIP from ~/storage/downloads to ~ on Termux.
Ok I can't run installtemproot.sh in adb, and neither on the phone itself through termux. Is there something I'm missing? su can't be find on the phone.
Edit: It works if you use Jack Pal's terminal emulator and you cd into its directory on adb. Sadly magisk doesn't recognize it's installed.
I'm on October 5 2018 security update and should flash September 5 2019 try temp root?I know stay away October's 2019 that's patch,sean
logan2611 said:
Sorry, screenshot didn't load the first time. Looks like all the files are already in place, try rebooting and running temproot.sh
Click to expand...
Click to collapse
Sorry for wait time, literally had to wait for type-c to type-c connection -_- it's pain....
Anyway i did reboot and tried again with just temproot.sh, without repeating previous stuff. No prompt is fired, but output is success
Hexlay said:
Sorry for wait time, literally had to wait for type-c to type-c connection -_- it's pain....
Anyway i did reboot and tried again with just temproot.sh, without repeating previous stuff. No prompt is fired, but output is success
Click to expand...
Click to collapse
client: launching new main daemon process
Click to expand...
Click to collapse
The output suggests that Magisk started successfully. What does Magisk Manager look like after running that script?