Related
Hi guys i might need some help with my lg g2 (d802 int version)
Well i installed the cloudyg3 2.0 throw Autorec.apk and all went fine. Then i decided to install xposed and flash some mods (android l navbar and QW_cloudy2.0 fix) when suddendly after the reboot the phone is stuck on lg's logo saying Security Error. I can only Factory Reset and i dont know how to fix this
PS: im on my laptop only monday, for now im stuck in SurfaceRT
Are you able to enter the download mode ?
Power off - then hold volume up and connect to pc.
Vol+power says Security Error
The only think i can do is Vol- + Power that is factory hard reset
Found the reason
http://forum.xda-developers.com/lg-g2/themes-apps/quickcircle-music-g3-ported-roms-t2800536
Forgot to read Notes
Don't flash any other zip except QW_Cloudy_2.0_fix_v2.3zip if you are on cloudy g3 2.0
If i do the Factory Hard Reset will it go to TWRP ?
bllon745 said:
Found the reason
http://forum.xda-developers.com/lg-g2/themes-apps/quickcircle-music-g3-ported-roms-t2800536
Forgot to read Notes
Don't flash any other zip except QW_Cloudy_2.0_fix_v2.3zip if you are on cloudy g3 2.0
If i do the Factory Hard Reset will it go to TWRP ?
Click to expand...
Click to collapse
Yeah if TWRP is the recovery you have, a factory reset will take you to TWRP where you can clean flash again or disable xposed.
vPro97 said:
Yeah if TWRP is the recovery you have, a factory reset will take you to TWRP where you can clean flash again or disable xposed.
Click to expand...
Click to collapse
Thanks, i didnt wanna mess up xD
Fixed ?
Hello everyone and I apologize if there's been a solution to this before but I couldn't find it.
I was on Rooted stock V20F, and there was a new OTA update from LG (around 110 MBs). Before installing anything i made a backup from TWRP Recovery just in case anything went bad.
So after I download the official update, the phone reboots, and boots into TWRP recovery. From that moment, I can't get the phone to boot properly no matter what I do.
I tried restoring my backup, the phone will still boot into TWRP. Tried Factory Reset, Format Data, installing a new custom rom and nothing. It always brings me back to TWRP.
Also when i try to get into download mode so I can flash a KDZ file with flash tool, it boots into TWRP again.
Any ideas? Thanks a lot in advance.
edit: I actually found the solution here (it wasn't in the troubleshoot section and I didn't notice it..): http://forum.xda-developers.com/showthread.php?t=2451696
Is there any way to install official OTA updates without the phone freaking out?
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....
Title says it all. Bricked my s5 active trying to write G870A_NE4_Stock Kernel.tar.md5 using Odin. I really don't know why it didn't work, but now my phone is stuck on the samsung active splash screen. If anybody can offer some advice on what I could do to resolve this problem, it would be greatly appreciated. Thanks.
Try booting into recovery if possible and wipe all data everyhing and flash stock FW for your model.... dunno what else can you do
Reflash the whole thing again using Odin and it should be fine.
ur not hard bricked but just soft bricked, easy to recover, just wipe and reflash compatible rom via twrp or stock fw via odin
Hi,
I unlocked the bootloader of my H870, installed TWRP 3.1.1.0 and SUPERSU. Everything was working great untill I decided to restore my system defaults to make a fresh start with my G6. After choosing the option to restore system defaults, my phone rebooted and it booted into TWRP. I rebooted my phone and it kept doing this all the time.
I decided to look for a stock ROM and flash that ROM.
I succesfully flashed the "LG-H87010f-Flashable.COMPLETE.zip" ROM (from autoprime's post) trough TWRP. But this did not work. I even wiped all the data from my phone (even system) and flashed the ROM again; still nothing.
Before having this issue, I had the same Baseband version, Kernel version, Build number. Only the dates and the Software Version are different.
I had the V10b-EUR-XX Software Version installed on my phone. I see this is the 10f version. I guess this should not be a problem right?
After this I took these steps solve this issue:
1. Downloaded new LG Mobile Drivers (LGMobileDriver_WHQL_Ver_4.2.0)
2. Downloaded and installed LGUP. LGUP doesnt recognize my phone as a LG G6 and this method did not work for that reason.
Fastboot mode is working on my phone; I can reboot my phone trough the commandline on my PC and things like that . However, my PC is not recognizing my phone as a LG G6 device in Fastboot mode.
My PC recognices my phone as a H870 when in TWRP. In Fastboot mode it recognices my phone as Android Device.
3. Installed LG Bridge for more drivers; did not work either
4. Downloaded Uppercut, but it doenst work without LGUP.
4. Looked all over the internet to find a Stock ROM in .zip or .img format; found nothing
5. Downloaded WindowsLGFirmwareExtract-1.2.6.1 and tried to extract the H87010d_00_OPEN_EU_OP_0327.kdz file. I extracted it into .bin files, but they were not usable. After that, I combined these .bin files into a system.img file. But that .img file was bigger then 5 GB and for that reason it was not usable to flash trough Fastboot or TWRP.
7. Looked for other methods to obtain a H870 Stock Rom, including another extraction method, but I cant figure out how to do this.
I have spend countless hours on this problem, but I cant find an usable H870 stock rom to flash my phone with.
Is there someone that can help me out with this problem? Im willing to donate some € if someone helps me to get my phone working again.
Really hoping for a kind person to help me out and provide me solution for this issue.
Thanks in advance
Try formating data in TWRP(not factory reset) then flash the 10f complete zip. Trying to perform a factory reset from within Android could have possibly messed up your data (due to TWRP being installed instead of stock recovery) so a full data format is needed.
Lgup most likely doesn't detect the phone because you wiped system. But flashing the complete zip should have restored system.
In the future make backups in TWRP to restore later.. or flash a kdz with lg bridge or lgup without wiping system first.
autoprime said:
Try formating data in TWRP(not factory reset) then flash the 10f complete zip. Trying to perform a factory reset from within Android could have possibly messed up your data (due to TWRP being installed instead of stock recovery) so a full data format is needed.
Lgup most likely doesn't detect the phone because you wiped system. But flashing the complete zip should have restored system.
In the future make backups in TWRP to restore later.. or flash a kdz with lg bridge or lgup without wiping system first.
Click to expand...
Click to collapse
Thanks for your reply. I have already formatted data in TWRP, but im still having this problem . It seems like something is preventing my device from starting up. I have flashed several ROMS on other devices, but never experienced something like this. Is there something else I can try? Can I flash the stock recovery and flash the stock ROM? I got the feeling TWRP is causing this issue.
If its possible to flash stock recovery, where can I find it?
RoyalD said:
Thanks for your reply. I have already formatted data in TWRP, but im still having this problem . It seems like something is preventing my device from starting up. I have flashed several ROMS on other devices, but never experienced something like this. Is there something else I can try? Can I flash the stock recovery and flash the stock ROM? I got the feeling TWRP is causing this issue.
If its possible to flash stock recovery, where can I find it?
Click to expand...
Click to collapse
Flash the complete zip then boot into download mode and flash kdz. Lgup should see the device as a g6 now instead of unknown device. If lgup isn't seeing any device at all (including unknown device) then your setup is off.. missing drivers or something. If that doesn't work.. idk.
RoyalD said:
Thanks for your reply. I have already formatted data in TWRP, but im still having this problem . It seems like something is preventing my device from starting up. I have flashed several ROMS on other devices, but never experienced something like this. Is there something else I can try? Can I flash the stock recovery and flash the stock ROM? I got the feeling TWRP is causing this issue.
If its possible to flash stock recovery, where can I find it?
Click to expand...
Click to collapse
autoprime said:
Try formating data in TWRP(not factory reset) then flash the 10f complete zip. Trying to perform a factory reset from within Android could have possibly messed up your data (due to TWRP being installed instead of stock recovery) so a full data format is needed.
Lgup most likely doesn't detect the phone because you wiped system. But flashing the complete zip should have restored system.
In the future make backups in TWRP to restore later.. or flash a kdz with lg bridge or lgup without wiping system first.
Click to expand...
Click to collapse
Don't factory reset using the in phone option. You can only do this through twrp's option. To fix this you'll need to boot through the hard side, using power and volume down until the lg logo appears then release power for 1 sec and then repress keeping volume down pressed. Confirm yes twice on the white screens to get to twrp. Once in twrp then reset again and reflash the system. Then using twrps img installer flash your twrp img(make sure it is on ext sd) again. Then reboot.
Swizzle82 said:
Don't factory reset using the in phone option. You can only do this through twrp's option. To fix this you'll need to boot through the hard side, using power and volume down until the lg logo appears then release power for 1 sec and then repress keeping volume down pressed. Confirm yes twice on the white screens to get to twrp. Once in twrp then reset again and reflash the system. Then using twrps img installer flash your twrp img(make sure it is on ext sd) again. Then reboot.
Click to expand...
Click to collapse
Ohhh F*** YEAHH!!! :victory: Booting the "hard side" fixed the problem!! It was the first thing I tried this morning. I just booted this way and rebooted my phone without resetting or flashing anything. Im so damn happy lol. I still dont understand what happened and why my device was actling like this. But I learned a hard lesson; backup, backup and once again: BACKUP. And dont Factory reset in Android!
Thanks a lot for your help guys! I really apreciate it! :victory::victory:
autoprime said:
Flash the complete zip then boot into download mode and flash kdz. Lgup should see the device as a g6 now instead of unknown device. If lgup isn't seeing any device at all (including unknown device) then your setup is off.. missing drivers or something. If that doesn't work.. idk.
Click to expand...
Click to collapse
Thanks a lot for taking your time to help me out. The combination of your ROM/tips and Swizzle82's tip made me fix my phone. You're the man! :victory:
RoyalD said:
Thanks for your reply. I have already formatted data in TWRP, but im still having this problem . It seems like something is preventing my device from starting up. I have flashed several ROMS on other devices, but never experienced something like this. Is there something else I can try? Can I flash the stock recovery and flash the stock ROM? I got the feeling TWRP is causing this issue.
If its possible to flash stock recovery, where can I find it?
Click to expand...
Click to collapse
RoyalD said:
Ohhh F*** YEAHH!!! :victory: Booting the "hard side" fixed the problem!! It was the first thing I tried this morning. I just booted this way and rebooted my phone without resetting or flashing anything. Im so damn happy lol. I still dont understand what happened and why my device was actling like this. But I learned a hard lesson; backup, backup and once again: BACKUP. And dont Factory reset in Android!
Thanks a lot for your help guys! I really apreciate it! :victory::victory:
Click to expand...
Click to collapse
Probably because you already did all the flashing prior to. Glad it worked. This happened when I first got my V20 and was stoned not thinking. I reset using the in phone option and it caused twrp bootloop. I too learned the hard way.
Had the same issue, fixed it, thanks.
My phone kept doing this booting into recovery no mattery what ROM I installed.
I got into twrp by holding volume down and selecting yes on next 2 white screens....but now this message appears all the time.
please can someone help??
Here is message:
"Encryption Unsuccessful
The password you entered is correct, but unfortunately your data is corrupt.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset , you'll have an opportunity to restore any data that was backed up to your Google Account."
Matt.
matthew33 said:
My phone kept doing this booting into recovery no mattery what ROM I installed.
I got into twrp by holding volume down and selecting yes on next 2 white screens....but now this message appears all the time.
please can someone help??
Here is message:
"Encryption Unsuccessful
The password you entered is correct, but unfortunately your data is corrupt.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset , you'll have an opportunity to restore any data that was backed up to your Google Account."
Matt.
Click to expand...
Click to collapse
Flash a firmware trough LGUp, or flash again the last TWRP available trough fastboot.
RoyalD said:
Thanks a lot for taking your time to help me out. The combination of your ROM/tips and Swizzle82's tip made me fix my phone. You're the man! :victory:
Click to expand...
Click to collapse
Please help, i have the same problem and nothing, what exactly is a boot to the hard side? I ve tried to power off the phone, press vol down and power, realase power 1 sec, press again...but nothing...still boot on twrp...
Well, I finally solved it with lgup and uppercut... what a nightmare.
matthew33 said:
My phone kept doing this booting into recovery no mattery what ROM I installed.
I got into twrp by holding volume down and selecting yes on next 2 white screens....but now this message appears all the time.
please can someone help??
Here is message:
"Encryption Unsuccessful
The password you entered is correct, but unfortunately your data is corrupt.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset , you'll have an opportunity to restore any data that was backed up to your Google Account."
Matt.
Click to expand...
Click to collapse
Flash stocl .kdz with uppercut and lg up
Saved my G6!
Swizzle82 said:
Don't factory reset using the in phone option. You can only do this through twrp's option. To fix this you'll need to boot through the hard side, using power and volume down until the lg logo appears then release power for 1 sec and then repress keeping volume down pressed. Confirm yes twice on the white screens to get to twrp. Once in twrp then reset again and reflash the system. Then using twrps img installer flash your twrp img(make sure it is on ext sd) again. Then reboot.
Click to expand...
Click to collapse
Great tip @Swizzle82! It allowed me to restore my LG G6 after bootloop. It had not been detected by PC, and this hardware reset helped!
Hi, all
If I understand, and to sum up :
I rooted my LG-G6 few weeks ago, and intall TWRP. When OTA wants to install official update, the reboot stops in TWRP mod, so ... failed :-/
Is the solution to flash through Uppercut/LGUP with a .kdz file, without risk of brick the phone ?
Thx