I updated from 4.3 to 4.4.2 via odin. Everything went fine and odin showed pass. But now IMEI and Baseband show null and SIM isn't working o-o
I tried all of the 4.4.2 firmwares for my region, that is UAE (XSI), problem is still the same.
Any Help?
haseebbutt10 said:
I updated from 4.3 to 4.4.2 via odin. Everything went fine and odin showed pass. But now IMEI and Baseband show null and SIM isn't working o-o
I tried all of the 4.4.2 firmwares for my region, that is UAE (XSI), problem is still the same.
Any Help?
Click to expand...
Click to collapse
Reboot in stock recovery and tell me what appears in yellow close to "Applied the CSC-code:..."
Joku1981 said:
Reboot in stock recovery and tell me what appears in yellow close to "Applied the CSC-code:..."
Click to expand...
Click to collapse
# MANUAL MODE #
-- Applying Multi-CSC...
Applied the CSC-code : XSI
Successfully applied multi-CSC.
haseebbutt10 said:
# MANUAL MODE #
-- Applying Multi-CSC...
Applied the CSC-code : XSI
Successfully applied multi-CSC.
Click to expand...
Click to collapse
Cool, what model of note 3 do you own? You can take a look under the battery if you aren't sure.
Joku1981 said:
Cool, what model of note 3 do you own? You can take a look under the battery if you aren't sure.
Click to expand...
Click to collapse
SM-N9005
haseebbutt10 said:
SM-N9005
Click to expand...
Click to collapse
Sometimes the problem is easy to solve. Download, unzip and reflash the firmware for your device via ODIN: HERE.
Joku1981 said:
Sometimes the problem is easy to solve. Download, unzip and reflash the firmware for your device via ODIN
Click to expand...
Click to collapse
Did that. I currently have that on my phone, I re-did it few times. Still the same problem.
haseebbutt10 said:
Did that. I currently have that on my phone, I re-did it few times. Still the same problem.
Click to expand...
Click to collapse
Factory reset your phone.
Joku1981 said:
Factory reset your phone.
Click to expand...
Click to collapse
Did that many times .-.
Joku1981 said:
Factory reset your phone.
Click to expand...
Click to collapse
Factory reset will restore from the null IMEI? Nope, never.
haseebbutt10 said:
Did that. I currently have that on my phone, I re-did it few times. Still the same problem.
Click to expand...
Click to collapse
Try this post.
Related
Hi XDA.
Recently i've been experiencing a frustrating issue with my Samsung Galaxy S4 i9505. Whenever i try to answer an incoming call (by dragging the green button all the way) the call is not opened, instead it closes. I tried restoring it to default settings and after doing that it works for like a couple of hours or so. I resetted it last night but this morning the problem showed up again.
Any solutions you can think of? Thank you
Dial *#1234# and attach the screenshot here
Joku1981 said:
Dial *#1234# and attach the screenshot here
Click to expand...
Click to collapse
For some reason, every screenshot i did of what you asked for is shown as a blank picture but i will write it down here. After i dial *#1234# it opens firstly the list of programs i have granted root access through Superuser and after i tap the Back button it shows a list of 3 codes as following:
AP : I9505XXUFNBE
CP : I9505XXUFNA1
CSC : I9505OXAFNB8
Adeniasi said:
For some reason, every screenshot i did of what you asked for is shown as a blank picture but i will write it down here. After i dial *#1234# it opens firstly the list of programs i have granted root access through Superuser and after i tap the Back button it shows a list of 3 codes as following:
AP : I9505XXUFNBE
CP : I9505XXUFNA1
CSC : I9505OXAFNB8
Click to expand...
Click to collapse
Wipe all, unzip and flash through ODIN this firmware: HERE (like in the pic attached)
Joku1981 said:
Wipe all, unzip and flash through ODIN this firmware: HERE (like in the pic attached)
Click to expand...
Click to collapse
I have to mention that I changed my firmware once yesterday and the problem was still there. Is your last answer still viable?
Adeniasi said:
I have to mention that I changed my firmware once yesterday and the problem was still there. Is your last answer still viable?
Click to expand...
Click to collapse
Yeah, you need reflash the firmware I posted u before
Joku1981 said:
Yeah, you need reflash the firmware I posted u before
Click to expand...
Click to collapse
Not a problem if I am on a Knox-enabled bootloader? Sorry for asking so many questions but I want to be sure
Adeniasi said:
Not a problem if I am on a Knox-enabled bootloader? Sorry for asking so many questions but I want to be sure
Click to expand...
Click to collapse
No. Im in KNOX: 0x1 too and im using it. All will be ok :highfive:
Joku1981 said:
No. Im in KNOX: 0x1 too and im using it. All will be ok :highfive:
Click to expand...
Click to collapse
Okay. I did as you told me and it seems to be ok. As I said at the beggining of the topic, I changed my firmware several times and it worked in the beggining but the problem was back a few days later. Hopefully this time it will be gone for good. I will keep you in touch and if nothing bad happens for a week, I will write it down here. Thanks man, fast and good answers, all on XDA!
Adeniasi said:
Okay. I did as you told me and it seems to be ok. As I said at the beggining of the topic, I changed my firmware several times and it worked in the beggining but the problem was back a few days later. Hopefully this time it will be gone for good. I will keep you in touch and if nothing bad happens for a week, I will write it down here. Thanks man, fast and good answers, all on XDA!
Click to expand...
Click to collapse
Aaaand..it came back. It took it only a couple hours this time..
Adeniasi said:
Aaaand..it came back. It took it only a couple hours this time..
Click to expand...
Click to collapse
Dial *#1234# again pls and attach the screenshot
joku1981 said:
dial *#1234# again pls and attach the screenshot
Click to expand...
Click to collapse
ap : I9505xxufnb8
cp : I9505xxufnb8
csc : I9505oxafnb8
Adeniasi said:
ap : I9505xxufnb8
cp : I9505xxufnb8
csc : I9505oxafnb8
Click to expand...
Click to collapse
Make a factory reset (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything). I hope it works :highfive:
Joku1981 said:
Make a factory reset (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything). I hope it works :highfive:
Click to expand...
Click to collapse
I did that so many times already..
Adeniasi said:
I did that so many times already..
Click to expand...
Click to collapse
Are ur phone branded/locked to one phone company?
Joku1981 said:
Are ur phone branded/locked to one phone company?
Click to expand...
Click to collapse
No, i bought it unbranded, free of service.
Adeniasi said:
No, i bought it unbranded, free of service.
Click to expand...
Click to collapse
No idea yet?
hey, i recently bought an unlocked Samsung s5 and online it didn't not specify what region it was made for stop doesn't have all the languages i need. is it possible to just flash another regions firmware or does it need to be specifically for my galaxy?
i have a G900f
skrcer1 said:
hey, i recently bought an unlocked Samsung s5 and online it didn't not specify what region it was made for stop doesn't have all the languages i need. is it possible to just flash another regions firmware or does it need to be specifically for my galaxy?
i have a G900f
Click to expand...
Click to collapse
Yes that possible as long as its G900F firmware. Just flash it with Odin 3.09.
gee2012 said:
Yes that possible as long as its G900F firmware. Just flash it with Odin 3.09.
Click to expand...
Click to collapse
awesome thanks! do you know how to find which firmware is for my region?
skrcer1 said:
awesome thanks! do you know how to find which firmware is for my region?
Click to expand...
Click to collapse
Look here www.sammobile.com/firmwares/2/ and look for a rom in your region. Where do you live?
gee2012 said:
Look here www.sammobile.com/firmwares/2/ and look for a rom in your region. Where do you live?
Click to expand...
Click to collapse
Israel
skrcer1 said:
Israel
Click to expand...
Click to collapse
There are Israelian roms available for the G900F on Sammobile. Flash the one you need with Odin 3.09.
gee2012 said:
There are Israelian roms available for the G900F on Sammobile. Flash the one you need with Odin 3.09.
Click to expand...
Click to collapse
thanks !
hey so I tried flashing with odin and at the end it says failed and now my phone says "firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
I tried reflashing with the same downloaded israeli firmware from and the same thing happens. It still gets a blue ready sign in odin. any ideas of how to fix this?
skrcer1 said:
hey so I tried flashing with odin and at the end it says failed and now my phone says "firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
I tried reflashing with the same downloaded israeli firmware from and the same thing happens. It still gets a blue ready sign in odin. any ideas of how to fix this?
Click to expand...
Click to collapse
Oke, just do the following:
- Disable Kies in windows task manager
- Pull the battery and wait 20 seconds
- Boot into downloadmode and connect to the pc
- Untick Auto Reboot in Odin 3.09 and place the rom in AP
- Hit start and when done pull the battery
- Boot into recovery and data factory reset and boot.
gee2012 said:
Oke, just do the following:
- Disable Kies in windows task manager
- Pull the battery and wait 20 seconds
- Boot into downloadmode and connect to the pc
- Untick Auto Reboot in Odin 3.09 and place the rom in AP
- Hit start and when done pull the battery
- Boot into recovery and data factory reset and boot.
Click to expand...
Click to collapse
when it finishes in odin it still says downloading... do not turn off target on the phone. is that fine?
skrcer1 said:
when it finishes in odin it still says downloading... do not turn off target on the phone. is that fine?
Click to expand...
Click to collapse
Yup, pull the battery, wait 20 seconds, go into recovery and factory reset and reboot.
gee2012 said:
Yup, pull the battery, wait 20 seconds, go into recovery and factory reset and reboot.
Click to expand...
Click to collapse
Ok, i have tried and when i hold volume up, power, and menu key at once it brings me back to the kies firmware issue screen
skrcer1 said:
Ok, i have tried and when i hold volume up, power, and menu key at once it brings me back to the kies firmware issue screen
Click to expand...
Click to collapse
Was the rom completely flashed by Odin? Did it say reset in the window ?
gee2012 said:
Was the rom completely flashed by Odin? Did it say reset in the window ?
Click to expand...
Click to collapse
yeah, completely flashed but it says failed in odin for some reason.
skrcer1 said:
yeah, completely flashed but it says failed in odin for some reason.
Click to expand...
Click to collapse
Do you have Teamviewer on your pc, i can help you from here if you want that. If so install TeamViewer and let me know.
This method never fails actualy:
Have you disabled Kies in windows task manager?
- Pull the battery, wait 20 seconds and boot in to downloadmode
- Place the .md5 file in AP, connect the phone with usb and untick Auto Reboot in Odin 3.09
- Flash the rom, pull the battery, boot into recovery and factory reset and wipe cache
- Reboot.
gee2012 said:
Do you have Teamviewer on your pc, i can help you from here if you want that. If so install TeamViewer and let me know.
This method never fails actualy:
Have you disabled Kies in windows task manager?
- Pull the battery, wait 20 seconds and boot in to downloadmode
- Place the .md5 file in AP, connect the phone with usb and untick Auto Reboot in Odin 3.09
- Flash the rom, pull the battery, boot into recovery and factory reset and wipe cache
- Reboot.
Click to expand...
Click to collapse
yes, i tried that, i downloaded team viewer can you private message me?
skrcer1 said:
yes, i tried that, i downloaded team viewer can you private message me?
Click to expand...
Click to collapse
I started TeamViewer, start yours and give me your Partner-ID through PM
This problem is still happening, anyone else know what may be the problem? It seems as if it is Chinese, could it be a fake?
skrcer1 said:
This problem is still happening, anyone else know what may be the problem? It seems as if it is Chinese, could it be a fake?
Click to expand...
Click to collapse
If you bought yours from a reputable seller, you don't have to worry about this but there are some fake galaxy s5 around. There are some differences that you can observe.
Hopefully this is not the case with yours.
tookie015 said:
If you bought yours from a reputable seller, you don't have to worry about this but there are some fake galaxy s5 around. There are some differences that you can observe.
Hopefully this is not the case with yours.
Click to expand...
Click to collapse
Well I bought it from amazon. It seemed legit and it looks legit for the most part except the sticker on the inside behind the battery where it says g900f is in Chinese and I heard its not supposed to be.
And I teamviewed with gee , he made sure everything in Odin was set up correctly. It was, we thought maybe the file was corrupt so I download it again from another source and it didn't help.
Any ideas on how I can fix this assuming it is not. Fake?
I just updated through Kies to try and solve my audio problem, and it updated my phone to I9505XXUGNG8, it didn't fix the sound issue. I want to completely install a different firmware, which one do I use?
jesus1987 said:
I just updated through Kies to try and solve my audio problem, and it updated my phone to I9505XXUGNG8, it didn't fix the sound issue. I want to completely install a different firmware, which one do I use?
Click to expand...
Click to collapse
Dial *#1234# and tell me what appears. Kies 3 don't udpate good the devices sometimes. You can fix the problem with the sound maybe in some minutes, only reflashing the correct firmware through ODIN :highfive:
Joku1981 said:
Dial *#1234# and tell me what appears. You can fix the problem with the sound maybe in some minutes :highfive:
Click to expand...
Click to collapse
Hi there, I tried out a few firmwares in the meantime, but I still have no sound at the moment with the one I am on:
AP : I9505XXUGNJ3
CP : I9505XXUGNJ3
CSC : I9505H3GGNJ2
Hope you can help!!!
Joku1981 said:
Dial *#1234# and tell me what appears. Kies 3 don't udpate good the devices sometimes. You can fix the problem with the sound maybe in some minutes, only reflashing the correct firmware through ODIN :highfive:
Click to expand...
Click to collapse
Just tried another firmware version, still no sound!
AP : I9505XXUGNI2
CP : I9505XXUGNI2
CSC : I9505EVRGNI2
jesus1987 said:
Just tried another firmware version, still no sound!
AP : I9505XXUGNI2
CP : I9505XXUGNI2
CSC : I9505EVRGNI2
Click to expand...
Click to collapse
What CSC do you have?
Joku1981 said:
What CSC do you have?
Click to expand...
Click to collapse
Here
Could installing a custom rom/firmware fix the sound problem do you think?
jesus1987 said:
Could installing a custom rom/firmware fix the sound problem do you think?
Click to expand...
Click to collapse
1. Take a look your CSC.
2. Go to Sammobile.com and download it.
3. Wipe all (remember backup your data before)
4. Flash and reflash this firmware in your device through ODIN (2 times).
5. It will have a hardware issue if you still without sound.
Joku1981 said:
1. Take a look your CSC.
2. Go to Sammobile.com and download it.
3. Wipe all (remember backup your data before)
4. Flash and reflash this firmware in your device through ODIN (2 times).
5. It will have a hardware issue if you still without sound.
Click to expand...
Click to collapse
I showed you the CSC above, in the image I attached. So what shall I search for on the sammobile site?
jesus1987 said:
I showed you the CSC above, in the image I attached. So what shall I search for on the sammobile site?
Click to expand...
Click to collapse
1. Make a data backup of your device and wipe all (This step is very important)
2. Download and flash this firmware through ODIN and you will recover the sound :fingers-crossed:
3. Flash that firmware again (2nd time) if you don't recover the sound.
4. Factory reset your phone.
5. Tell me if you won the battle :highfive:
6. I read the other post yours. I think will be a hardware problem maybe. You did very good all steps. Im sorry for that
Joku1981 said:
1. Download and flash this firmware through ODIN and you will recover the sound :fingers-crossed:
2. Flash that firmware again (2nd time) if you don't recover the sound.
3. Tell me if you won the battle :highfive:
Click to expand...
Click to collapse
This is the firmware I have already flashed onto my phone, I already downloaded it from sammobile. This is why you see the CSC code, because I already flash this! I will try flashing it again a few more times though.
jesus1987 said:
This is the firmware I have already flashed onto my phone, I already downloaded it from sammobile. This is why you see the CSC code, because I already flash this! I will try flashing it again a few more times though.
Click to expand...
Click to collapse
I updated my answer. Good luck :highfive:
Joku1981 said:
I updated my answer. Good luck :highfive:
Click to expand...
Click to collapse
I'm still convinced that it is software problem, as the music player says "unsupported file type" even for mp3, and volume ticker has a big delay when I try to change volume. And unlocking the lock screen is very slow. But, when I choose 'mute' for the sound, unlocking is fine and the phone seems fast again. So it seems that whenever the phone tried to play a sound, it can't, and freezes because it doesn't know what to do....
Also, making a call doesn't work. So I'm thinking it's a modem problem. I will try the BTU firmware....
Does anyone advise doing a full wipe with CWM, so formatting \system and everything, then flashing the stock rom back on?? I'm sure there is a problem with the system files. But I don't know how dangerous doing a format \system is if I flash a new firmware
Does anyone know which custom firmware I can flash if I'm currently on I9505XXUGNG8 stock? I'd appreciate the help, to save opening a new thread.
I don't care if it's a custom rom, or a pre rooted stock, the original stock firmwares aren't fixing my phone at all in regards to the no sound/can't phone/unresponsive camera
Maybe have a look here,
http://forum.xda-developers.com/showthread.php?t=2612167
Sent from my GT-I9505 using XDA Free mobile app
Since last night signal are not coming to my mobile but mobile data working fine..i reflash mobile but same problem...plz help ...m on stock lolipomy imei is fine ..sory for poor english
Reboot 67 times.
kenny1991 said:
Reboot 67 times.
Click to expand...
Click to collapse
67 times ?? r u really serious??
mudasir13 said:
67 times ?? r u really serious??
Click to expand...
Click to collapse
Good lord! No, he isn't serious obviously!
Try to insert the same SIM card in another mobile, see whether you see network is there or not.
i put the sim card into the other mobile its working fine.
Then there is something wrong with your phone, I mean the Note 3, but can't say what! Maybe modem related issue! No idea really. Try to wipe and flash a ROM, see if it does anything.
mudasir13 said:
Since last night signal are not coming to my mobile but mobile data working fine..i reflash mobile but same problem...plz help ...m on stock lolipomy imei is fine ..sory for poor english
Click to expand...
Click to collapse
Install this APP and add all screenshots pls.
Here are screen short
Joku1981 said:
Install this APP and add all screenshots pls.
Click to expand...
Click to collapse
I have posted screen shots plz check
mudasir13 said:
I have posted screen shots plz check
Click to expand...
Click to collapse
Well. You have wrong firmware for your device installed.
1. You will have to download, unzip and flash this firmware via ODIN like in the pic attached.
2. Dial *#1234# when the flash process finish and have to appear this (Reflash the same firmware via ODIN if not):
AP: N9005DXUGBOF1
CP: N9005DXUGBOF1
CSC: N9005OLBGBOF1
Joku1981 said:
Well. You have wrong firmware for your device installed.
1. You will have to download, unzip and flash this firmware via ODIN like in the pic attached.
2. Dial *#1234# when the flash process finish and have to appear this (Reflash the same firmware via ODIN if not):
AP: N9005DXUGBOF1
CP: N9005DXUGBOF1
CSC: N9005OLBGBOF1
Click to expand...
Click to collapse
Bro i have flashed original firmware but same problem ...i tried custom rom but all in vain..
mudasir13 said:
Bro i have flashed original firmware but same problem ...i tried custom rom but all in vain..
Click to expand...
Click to collapse
You flashed WRONG firmware. Follow my steps pls if you need my help :highfive:
Joku1981 said:
You flashed WRONG firmware. Follow my steps pls if you need my help :highfive:
Click to expand...
Click to collapse
Bro i am from pakistan so plz recomend me firmware ...thnx in advance
mudasir13 said:
Bro i am from pakistan so plz recomend me firmware ...thnx in advance
Click to expand...
Click to collapse
OK. >>>>>>>>>>>>>>>>>>>>>> CLICK HERE <<<<<<<<<<<<<<<<<<<<<<<<<<< and follow the steps (It is the last time i tell you ).
Joku1981 said:
OK. >>>>>>>>>>>>>>>>>>>>>> CLICK HERE <<<<<<<<<<<<<<<<<<<<<<<<<<< and follow the steps (It is the last time i tell you ).
Click to expand...
Click to collapse
bro i flashes two times but same problem exist..
values are in screen shots
what i do now??
mudasir13 said:
bro i flashes two times but same problem exist..
values are in screen shots
what i do now??
Click to expand...
Click to collapse
1. Backup all your internal data.
2. Factory reset your device (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything).
3. Go to DOWNLOAD MODE and reflash the same firmware one time more via ODIN for fix the CP.
4. Dial again *#1234# and tell me what appears.
Joku1981 said:
1. Backup all your internal data.
2. Factory reset your device (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything).
3. Go to DOWNLOAD MODE and reflash the same firmware one time more via ODIN for fix the CP.
4. Dial again *#1234# and tell me what appears.
Click to expand...
Click to collapse
bro same result ...same cp no
mudasir13 said:
Here are screen short
Click to expand...
Click to collapse
What does the last screen shot tell you? Last one on bottom, maybe it will fix.
mudasir13 said:
bro same result ...same cp no
Click to expand...
Click to collapse
I think i was wrong with the CP. I think all is ok now. OK, but.. have you signal now? Can you call somebody?
Joku1981 said:
I think i was wrong with the CP. I think all is ok now. OK, but.. have you signal now? Can you call somebody?
Click to expand...
Click to collapse
no still facing problem..no calls no sms only data working.....what i do now
I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
davekaz said:
I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
Click to expand...
Click to collapse
Restart pc and try latest firmware again
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Try different odin version and different usb cable
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try different odin version and different usb cable
Click to expand...
Click to collapse
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
thanks for trying but I just bought the phone and was trying to downgrade to unlock..so dont think twrp will take..
I appreciate all you help but im screwed
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Did you solve your issue?
Click to expand...
Click to collapse
I did it..! SOLVED..!
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
alca00 said:
Trex888 said:
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Congrats ! Glad to hear that .
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
yes it was the damned usb cord..Lol everything went smooth after that
Thanks to all
Click to expand...
Click to collapse
I had same issue, fail on all firmware (Verizon Note 4), changed usb cord, flashed back to stock and was even able to downgrade (5.0.1).
Pls help me out guys.....my two weeks old samsung note 4 is stock on Software Update Failed
Your device didnt update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update.
My phone details:
Model: SM-N910V
SKU: SMN910VZKE
Thanks.
Does anyone have this file? The page is dead.
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Sumupali said:
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Click to expand...
Click to collapse
A 910F with a Verizon mobo?
Might be tricky to flash.
You can access download mode?
Tried different cables / USB ports?
I really doubt that you can flash stock ROM from SD when phone is boot looping.
Maybe with terminal but you would have to flash TWRP for that first.