Hi all,
I think I have soft bricked my S4 i337m rogers Canadian variant.
I had rooted / unlocked the bootloader with motochopper successfully.
- I am using CWM
First thing I tried to do was backup the phone onto the external SD which would not work so I just went onto the next step.
I tried flashing a ROM onto the phone after doing phone restore and clearing cache. All installed correctly (apparently) and now when I boot up the phone the Samsung logo will appear for about 5 seconds then the phone will go black and try to boot up again.
The good:
- i have access the recovery mode still
The bad:
- no recovery made for the phone
- seems to be boot looping
As a side not I have tried installing a couple other ROMs which all result in the same issue.
Is there anything that can possibly be done?
I would happily put the stock ROM back on the phone.
All help would be greatly appreciated!
Rob.
9 times out of 10 a factory reset will get you out of a boot loop. Do that in recovery and reboot.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Hi thanks for the reply. I have tried the factory reset and still does not fix the issue
Robby29 said:
Hi thanks for the reply. I have tried the factory reset and still does not fix the issue
Click to expand...
Click to collapse
If you are flashing a custom ROM that is not specifically for your phone, say a i9505 rom, you need to flash a Canadian kernel right after or you will bootloop. You also cannot flash any loki based roms either. As for the CWM backups, are you trying to back up to your external SD? If so, ensure the card is formatted fat32. To help get through your softbrick, just get into download mode and flash with odin
kiru said:
If you are flashing a custom ROM that is not specifically for your phone, say a i9505 rom, you need to flash a Canadian kernel right after or you will bootloop. You also cannot flash any loki based roms either. As for the CWM backups, are you trying to back up to your external SD? If so, ensure the card is formatted fat32. To help get through your softbrick, just get into download mode and flash with odin
Click to expand...
Click to collapse
Okay great I will try these. Does the kernel have to be specific to the ROM?
Robby29 said:
Okay great I will try these. Does the kernel have to be specific to the ROM?
Click to expand...
Click to collapse
The kernel is specific to your device. so you would use the i337M kernel.
So the procedure would be flash the rom of your choice, then before you boot flash YOUR i337M kernel, it will boot.
Good luck.
And make sure you do not flash a rom for the i9500 as you will hard brick
Also,
Make sure you choose the right i337m kernel. ie. a TouchWiz kernel for TW Roms and an AOSP kernel for CM10.1/AOSP Roms.
You should be able to:
remove your sdcard,
format it to fat32,
download the correct rom and kernel for you i337m to your freshly formatted sdcard,
put the card back into your phone,
boot into recovery,
install ROM zip from ext-sdcard,
install Kernel zip from ext-sdcard,
reboot.
phew....sounds like a lot of steps but not really I guess.
we good up in here....
Soft Brick S4
TheAxman said:
we good up in here....
Click to expand...
Click to collapse
Hello,
Greetings to you, I am sorry you have come to this point. I myself have bricked my phone just yesterday from flashing a bad ROM and not backing up my ROM properly. But I hope I can help you with some tips that i did to recover my phone fully. I apply some links to help you out but I recommend some patience lots of HW. ( Kies didn't work for me bugger =p.)
Unbrick S4 [Guide] -- http://forum.xda-developers.com/showthread.php?t=2265477&page=40
there is a user by the name of samersh72. you can request for a link to download your correct firmware it's best to get back to stock, ( don't forget to thank the user . )
this is someones video on youtube: http://www.youtube.com/watch?v=3a3qghhpDxg ( this helped me out as well)
I have these files/programs readied when I reverted back to stock
odin 1.3 ( i have odin 3.0 and didn't work for me reverting stock as it couldnt detect my tar.md5 file, but for some reason it worked for odin 1.3)
have your correct firmware ( I downloaded mine from http://www.sammobile.com, but for some reason I can't find yours, there is one on this site for sure just have the patience to look) make sure its for your correct carrier too.
im pretty sure you know how to do the DL mode, but just incase ill assume that you may or may not know, ill type this in anyway:
Get your S4 Download mode, [pressing up+power+home], (sometimes if i feel its not kicking in, just quick release then do it again)
open your odin 1.3, plug your phone in, tick auto-reboot, and F. reset time. PDA ticked, then find your correct firmware. hit start, then i hope from this something good will come out.
Best of wishes in your journey here in xda.
Cheers!
car154 said:
Hello,
Greetings to you, I am sorry you have come to this point. I myself have bricked my phone just yesterday from flashing a bad ROM and not backing up my ROM properly. But I hope I can help you with some tips that i did to recover my phone fully. I apply some links to help you out but I recommend some patience lots of HW. ( Kies didn't work for me bugger =p.)
Unbrick S4 [Guide] -- http://forum.xda-developers.com/showthread.php?t=2265477&page=40
there is a user by the name of samersh72. you can request for a link to download your correct firmware it's best to get back to stock, ( don't forget to thank the user . )
this is someones video on youtube: http://www.youtube.com/watch?v=3a3qghhpDxg ( this helped me out as well)
I have these files/programs readied when I reverted back to stock
odin 1.3 ( i have odin 3.0 and didn't work for me reverting stock as it couldnt detect my tar.md5 file, but for some reason it worked for odin 1.3)
have your correct firmware ( I downloaded mine from http://www.sammobile.com, but for some reason I can't find yours, there is one on this site for sure just have the patience to look) make sure its for your correct carrier too.
im pretty sure you know how to do the DL mode, but just incase ill assume that you may or may not know, ill type this in anyway:
Get your S4 Download mode, [pressing up+power+home], (sometimes if i feel its not kicking in, just quick release then do it again)
open your odin 1.3, plug your phone in, tick auto-reboot, and F. reset time. PDA ticked, then find your correct firmware. hit start, then i hope from this something good will come out.
Best of wishes in your journey here in xda.
Cheers!
Click to expand...
Click to collapse
Thanks for posting this. I hope many people read it. Anyone who flashes needs to know how to return to stock before they start flashing roms. You will need it someday!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Hello,
Problem:
I own a Samsung Galaxy S4 I337 model from AT&T with a locked bootloader. While using safestrap I accidentally checked the /system folder while wiping the STOCK ROM. I didn't yet have another working ROM loaded onto the phone (Safestrap allows you to boot from multiple different ROMS). My phone now freezes at the Samsung logo when I try to boot normally, and I can't reflash the stock ROM in download mode as the bootloader is still locked (I can, however, boot into download mode).
My phone is recognized by ADB which (theoretically) means I can push files back to the device. I haven't yet tried although I'm afraid it may not work as only 2/3 drivers successfully install on my computer when I plug the phone in.
My request from the great tech gods at XDA Forums:
1) If anyone can please reply with any ideas/solutions to my problem I would greatly appreciate it. (PLEASE, ANYTHING. I'M DESPERATE!)
2) If anyone could supply me with a download for the Galaxy s4 I337 /system folder I could attempt to use ADB to push it onto the phone and reboot. WARNING: I'm not an expert on Android and know nothing about the /system folder. Using the /system folder from your personal phone could supply me with very personal information about you/your phone. Please only do this if you know what you're doing!
My ideas:
1) Use android ADB to push the missing files back to my phone, although I don't know if I deleted the entire /system folder or just select things inside it. Also I can't find any downloads for a /system folder anywhere on the Internet.
2) Take it back to AT&T and play dumb. Hopefully they can at least temporarily unlock the bootloader to reflash the stock ROM for me.
Any ideas are GREATLY appreciated,
JT
PS: If you need any more information please leave a reply and I will update the post ASAP. :good:
EDIT: I am running 4.3 Jellybean. Also in answer to your response, I can't flash the firmware again as the bootloader is locked. (Unless I'm missing something and you know more than me, I'm no expert.)
EDIT 2: Looks like I may be wrong and you can reflash the stock ROM on my locked bootloader. Also, for future responses, my S4 has the MF3 baseband although I'll try the thread you suggested. (With the files for my device of course)
EDIT 3: Having trouble flashing stock firmware again with ODIN even though I've now been told that it's possible, read below for more details. I think it's due to the PIT file or the fact that I was running 4.3 and I believe I am trying to flash back to 4.2.2. Please help!
SOLVED: Thanks to ted77usa, I flashed the MK2 stock ROM to my phone through ODIN and this time everything went without a hitch. THANKS A TON!
Also if any mods want to move/delete/do whatever with this post feel free to do so, I don't see this post being very useful for educational purposes as my logic on locked bootloaders was wrong and I don't want people getting the wrong idea.
What firmware are you on? I'd Odin flash the tar files for that firmware.
JTrocks said:
Hello,
Problem:
I own a Samsung Galaxy S4 I337 model from AT&T with a locked bootloader. While using safestrap I accidentally checked the /system folder while wiping the STOCK ROM. I didn't yet have another working ROM loaded onto the phone (Safestrap allows you to boot from multiple different ROMS). My phone now freezes at the Samsung logo when I try to boot normally, and I can't reflash the stock ROM in download mode as the bootloader is still locked (I can, however, boot into download mode).
My phone is recognized by ADB which (theoretically) means I can push files back to the device. I haven't yet tried although I'm afraid it may not work as only 2/3 drivers successfully install on my computer when I plug the phone in.
My request from the great tech gods at XDA Forums:
1) If anyone can please reply with any ideas/solutions to my problem I would greatly appreciate it. (PLEASE, ANYTHING. I'M DESPERATE!)
2) If anyone could supply me with a download for the Galaxy s4 I337 /system folder I could attempt to use ADB to push it onto the phone and reboot. WARNING: I'm not an expert on Android and know nothing about the /system folder. Using the /system folder from your personal phone could supply me with very personal information about you/your phone. Please only do this if you know what you're doing!
My ideas:
1) Use android ADB to push the missing files back to my phone, although I don't know if I deleted the entire /system folder or just select things inside it. Also I can't find any downloads for a /system folder anywhere on the Internet.
2) Take it back to AT&T and play dumb. Hopefully they can at least temporarily unlock the bootloader to reflash the stock ROM for me.
Any ideas are GREATLY appreciated,
JT
PS: If you need any more information please leave a reply and I will update the post ASAP. :good:
EDIT: I am running 4.3 Jellybean. Also in answer to your response, I can't flash the firmware again as the bootloader is locked. (Unless I'm missing something and you know more than me, I'm no expert.)
Click to expand...
Click to collapse
You can use ODIN just fine on the locked bootloaders. Follow the directions in the MK2 TARs thread in the general section.
RE: ODIN on locked bootloader
DeadlySin9 said:
You can use ODIN just fine on the locked bootloaders. Follow the directions in the MK2 TARs thread in the general section.
Click to expand...
Click to collapse
My phone has the MF3 baseband although I'll try the thread you suggested. (With the files for my device of course) Thanks!
Firmware Number
jd1639 said:
What firmware are you on? I'd Odin flash the tar files for that firmware.
Click to expand...
Click to collapse
I'm on 4.3 Jellybean although I don't believe I can reflash the firmware because of my locked bootloader.
EDIT: According to the above post, I can reflash it. Can someone please clarify what files I will need to do so?
JTrocks said:
I'm on 4.3 Jellybean although I don't believe I can reflash the firmware because of my locked bootloader.
EDIT: According to the above post, I can reflash it. Can someone please clarify what files I will need to do so?
Click to expand...
Click to collapse
You need the mf3 tar files. Have you found then?
Flashing tar files with ODIN
jd1639 said:
You need the mf3 tar files. Have you found then?
Click to expand...
Click to collapse
I'm downloading them now from here. Can you verify for me that this is up to date/correct? I previously tried to flash the .tar.md5 file for my phone although I got a "write error" and after researching it I found that you can't flash files in download mode with a locked bootloader. Apparently this is wrong though, thanks for the all the help so far!
JTrocks said:
I'm downloading them now from here. Can you verify for me that this is up to date/correct? I previously tried to flash the .tar.md5 file for my phone although I got a "write error" and after researching it I found that you can't flash files in download mode with a locked bootloader. Apparently this is wrong though, thanks for the all the help so far!
Click to expand...
Click to collapse
Yep, those are the ones. Read the thread on how to use them
Flashing with ODIN
jd1639 said:
Yep, those are the ones. Read the thread on how to use them
Click to expand...
Click to collapse
I followed the thread exactly as it said but it failed. Then I included the the PIT file but still failed. I've attached a screenshot of ODIN after I tried with the PIT file.
EDIT: My phone is giving a message that reads: "SECURE CHECK FAIL : PIT" I read that PIT files have to be signed with a device-specific key to work, although it seems that most people aren't having a problem using one found off of the Internet. Any ideas?
EDIT 2: I believe those files are for 4.2.2, I was running 4.3, is this the issue? Also I don't know if my phone was updated OTA or not, I bought it from eBay. :/
JTrocks said:
I followed the thread exactly as it said but it failed. Then I included the the PIT file but still failed. I've attached a screenshot of ODIN after I tried with the PIT file.
EDIT: My phone is giving a message that reads: "SECURE CHECK FAIL : PIT" I read that PIT files have to be signed with a device-specific key to work, although it seems that most people aren't having a problem using one found off of the Internet. Any ideas?
EDIT 2: I believe those files are for 4.2.2, I was running 4.3, is this the issue? Also I don't know if my phone was updated OTA or not, I bought it from eBay. :/
Click to expand...
Click to collapse
@JTrocks ....If u are on 4.3 rom it mean that either u took OTA to MK2 firmware and then someone either u or the seller from ebay flash the modem back to MF3 to complete SIM UNLOCKED( if u ever sim unlocked ) .........either way just follow my thread..........
| ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.31.2014 ★ | u can restore to stock 4.3 MK2 firmware or even update to MK2 if u coming from MF3.....tested my self and others confirmed as well....:good::good: Check post #2 for guide on how to ,......BUT IF U STILL WANT TO FLASH THAT MF3.TAR .....TRY TO UN-CHECK RE-PARTITION FROM ODIN ONLY AUTO REBOOT AND F.RESET TIME ARE CHECK.....U DONT HAVE TO LOAD THAT PIT FILE.....JUST BOOTLOADER,PDA,MODEM AND CSC IS ENOUGH....ALSO TRY DIFFERENT ODIN VERSION FROM MY THREAD POST#2 THERE IS ODIN3 V1.85 ....GOODLUCK.....LET ME KNOW HOW IT GO....:good::good:
ted77USA
ted77usa said:
@JTrocks ....If u are on 4.3 rom it mean that either u took OTA to MK2 firmware and then someone either u or the seller from ebay flash the modem back to MF3 to complete SIM UNLOCKED( if u ever sim unlocked ) .........either way just follow my thread..........
| ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.31.2014 ★ | u can restore to stock 4.3 MK2 firmware or even update to MK2 if u coming from MF3.....tested my self and others confirmed as well....:good::good: Check post #2 for guide on how to ,......BUT IF U STILL WANT TO FLASH THAT MF3.TAR .....TRY TO UN-CHECK RE-PARTITION FROM ODIN ONLY AUTO REBOOT AND F.RESET TIME ARE CHECK.....U DONT HAVE TO LOAD THAT PIT FILE.....JUST BOOTLOADER,PDA,MODEM AND CSC IS ENOUGH....ALSO TRY DIFFERENT ODIN VERSION FROM MY THREAD POST#2 THERE IS ODIN3 V1.85 ....GOODLUCK.....LET ME KNOW HOW IT GO....:good::good:
Click to expand...
Click to collapse
Thanks for the reply, but before I go any further I should clarify some information about my phone. I bought an AT&T Samsung Galaxy S4 from eBay, when I got the phone it was running 4.3. The catch: My phone isn't actually on AT&T service OR SIM unlocked (I think), I'm with a cell provider called NET 10. How NET 10 works is that it pays AT&T to run off of their service, NET 10 is cheaper for the customers because it isn't as fast as AT&T. AT&T and Net 10 have an agreement where you can take any phone from AT&T and hook it up to NET 10 without unlocking it. Although I think that NET 10 may unlock your phone when you hook it up to their service, I'm not sure. What makes my think that is that when I booted my phone up after transferring to NET 10, a picture of an open padlock appeared under the Samsung logo.
Being on NET 10 may have changed some of that, specifically the MF3/MK2 baseband. Not being an expert on basebands and how they correlate to your cell service provider, will following your instructions result in not being able to connect to NET 10's service? It's probably a stupid question, I know, but with my minimal knowledge I figured I should ask before I followed through with anything.
JTrocks said:
Thanks for the reply, but before I go any further I should clarify some information about my phone. I bought an AT&T Samsung Galaxy S4 from eBay, when I got the phone it was running 4.3. The catch: My phone isn't actually on AT&T service OR SIM unlocked (I think), I'm with a cell provider called NET 10. How NET 10 works is that it pays AT&T to run off of their service, NET 10 is cheaper for the customers because it isn't as fast as AT&T. AT&T and Net 10 have an agreement where you can take any phone from AT&T and hook it up to NET 10 without unlocking it. Although I think that NET 10 may unlock your phone when you hook it up to their service, I'm not sure. What makes my think that is that when I booted my phone up after transferring to NET 10, a picture of an open padlock appeared under the Samsung logo.
Being on NET 10 may have changed some of that, specifically the MF3/MK2 baseband. Not being an expert on basebands and how they correlate to your cell service provider, will following your instructions result in not being able to connect to NET 10's service? It's probably a stupid question, I know, but with my minimal knowledge I figured I should ask before I followed through with anything.
Click to expand...
Click to collapse
It shouldn't. Your phone is the same model, and the firmware appears to be the same. At most you might have to put in an APN to get your mobile data back.
Continuing with Instructions
DeadlySin9 said:
It shouldn't. Your phone is the same model, and the firmware appears to be the same. At most you might have to put in an APN to get your mobile data back.
Click to expand...
Click to collapse
Thanks, I'm aware of the APN. I had SEVERAL issues with NET 10 when I first set that up. (THEY MISSPELLED THE F****** IP ADDRESS ON THEIR WEBSITE!) Still frustrated about that one. D:<
I'm now preparing to follow through with ted77usa's instructions. Sorry if I respond slow, I have to wait 5 minutes after each post/edit as I haven't been approved by a mod yet.
EDIT: I may have to continue this tomorrow, the site ted77usa used to host the .tar files is pretty slow. The download is going to take an hour and it's getting late here. I can't believe how much support I'm getting from everyone, thanks a TON! I'm clicking the thanks button on everyone who's helped me, it's the least I can do!
JTrocks said:
Thanks, I'm aware of the APN. I had SEVERAL issues with NET 10 when I first set that up. (THEY MISSPELLED THE F****** IP ADDRESS ON THEIR WEBSITE!) Still frustrated about that one. D:<
I'm now preparing to follow through with ted77usa's instructions. Sorry if I respond slow, I have to wait 5 minutes after each post/edit as I haven't been approved by a mod yet.
EDIT: I may have to continue this tomorrow, the site ted77usa used to host the .tar files is pretty slow. The download is going to take an hour and it's getting late here. I can't believe how much support I'm getting from everyone, thanks a TON! I'm clicking the thanks button on everyone who's helped me, it's the least I can do!
Click to expand...
Click to collapse
While u waiting. ... try to read all the thread so that would give u an idea what others issue incase u run same problem..... As long as u check md5 if they match then u should good to go. ... and seem to me u know usb debugging. ...all the driver already installed....PM me if u need more help ....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
All Good!
ted77usa said:
While u waiting. ... try to read all the thread so that would give u an idea what others issue incase u run same problem..... As long as u check md5 if they match then u should good to go. ... and seem to me u know usb debugging. ...all the driver already installed....PM me if u need more help ....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
AMAZING! Everything went without a hitch!! My phone now indicates that it is running Android 4.3, Baseband version MK2, and calls/texts are working just fine. I have to enter my APN settings again as DeadlySin9 mentioned, but I expect everything should work fine. Thanks to everyone who helped me out (especially ted77usa with the link to his thread), if there's anything I can do to help any of you out in return just let me know! THANKS A TON!!!
JTrocks said:
AMAZING! Everything went without a hitch!! My phone now indicates that it is running Android 4.3, Baseband version MK2, and calls/texts are working just fine. I have to enter my APN settings again as DeadlySin9 mentioned, but I expect everything should work fine. Thanks to everyone who helped me out (especially ted77usa with the link to his thread), if there's anything I can do to help any of you out in return just let me know! THANKS A TON!!!
Click to expand...
Click to collapse
Glad that u got your phone back..... and u also got great community in here...... the best place to learn and give back .....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
atnt splash screen
JTrocks said:
AMAZING! Everything went without a hitch!! My phone now indicates that it is running Android 4.3, Baseband version MK2, and calls/texts are working just fine. I have to enter my APN settings again as DeadlySin9 mentioned, but I expect everything should work fine. Thanks to everyone who helped me out (especially ted77usa with the link to his thread), if there's anything I can do to help any of you out in return just let me know! THANKS A TON!!!
Click to expand...
Click to collapse
Hey, i had a similar problem. MK2 safe root method. became rooted and everything was great. downloaded xposed framwork/installer. selected fast boot option by accident been stopping at the atnt splash screen ever since. i am able to boot into download/odin mode as well as recovery. I have tried mutiple wipes and facotry resets but same outcome, hangs at atnt screen. i creeped around the threads and found this. My first question is did Ted77usa files from his link take forever for you also? and second how many attmepts did it take with odin?
semarj said:
Hey, i had a similar problem. MK2 safe root method. became rooted and everything was great. downloaded xposed framwork/installer. selected fast boot option by accident been stopping at the atnt splash screen ever since. i am able to boot into download/odin mode as well as recovery. I have tried mutiple wipes and facotry resets but same outcome, hangs at atnt screen. i creeped around the threads and found this. My first question is did Ted77usa files from his link take forever for you also? and second how many attmepts did it take with odin?
Click to expand...
Click to collapse
@semarj If you follow my thread and guide on post#2 it should get u back on stock MK2 less then 6 minutes. .... As long as u have usb debugging check. ... Good usb cable. ....Good driver installed and make sure ONLY auto reboot and F. Reset Time CHECK from Odin..... GOODLUCK. ....PM ME IF YOU NEED MORE HELP. ....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
semarj said:
Hey, i had a similar problem. MK2 safe root method. became rooted and everything was great. downloaded xposed framwork/installer. selected fast boot option by accident been stopping at the atnt splash screen ever since. i am able to boot into download/odin mode as well as recovery. I have tried mutiple wipes and facotry resets but same outcome, hangs at atnt screen. i creeped around the threads and found this. My first question is did Ted77usa files from his link take forever for you also? and second how many attmepts did it take with odin?
Click to expand...
Click to collapse
It took about an hour for me to download ted77usa's files but I have relatively fast internet (16 mb/ps). As soon as the files downloaded it worked first try, are you in download mode? If you are and it's still not working you may need the PIT file and to make sure that re-partition is checked along with the 2 others that ted77usa mentioned.
drivers finished
ted77usa said:
@semarj If you follow my thread and guide on post#2 it should get u back on stock MK2 less then 6 minutes. .... As long as u have usb debugging check. ... Good usb cable. ....Good driver installed and make sure ONLY auto reboot and F. Reset Time CHECK from Odin..... GOODLUCK. ....PM ME IF YOU NEED MORE HELP. ....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
Click to expand...
Click to collapse
I will post back asap. the drivers were taking forever to download so i started a kias emergency firmware recovery. thats taking forever also. its only at 79% but have been running for an hour. should i let finish? and if unsuccessful try odin or just quit and do odin?
Hi guys,
My phone has suddenly gone into bootloop.
I tried hard resetting it using vol UP+home+power button. I wiped cache and followed it with factory reset. I didn't do any good. Its still in bootloop.
Please, help me regarding this. I can't start the phone to know any details in order to download the appropriate stock ROM.Also, if it matters, the phone has never been rooted and the warranty has expired.
You guys helped me out earlier as well. And even this time around I hope this community could get me out of this mess.
Thank you guys!
if formatting data in cwm doesn't sort the bootloop you will have to flash stock rom via odin - just choose which ever one relates to your geographical region
Link to my firmware thread is as ever accessible through the link in my signature or at the top of the dev thread
marcussmith2626 said:
if formatting data in cwm doesn't sort the bootloop you will have to flash stock rom via odin - just choose which ever one relates to your geographical region
Link to my firmware thread is as ever accessible through the link in my signature or at the top of the dev thread
Click to expand...
Click to collapse
Ok! Thank you.
I'll try it in an hour and come back if face any trouble. BTW, I don't think I have enabled USB debugging. Won't that be a problem?
Thank you!
It worked.
Hi Guys. I'm new to this forum so do excuse me if you find my question stupid or in the wrong thread. I have a Galaxy S5 (SM-G900W8) which I tried rooting some time back. But as a result of the rooting, it has gone into a continuous boot loop. I have tried going back into recovery mode and resetting everything along with clearing the cache but that didn't work, Then I tried unrooting the device using ODIN and the stock ROM downloaded from Sammobile. But it showed failed at the end of the process. I thought that it may be because I may used the wrong ROM so now I'm trying to download the ROM used for unknown variants. My question is if there is any other way that I can use to unbrick my boot looped phone or will I have spend money and take to a service centre?
Any help or advise will be sincerely appreciated. It is worth mentioning here that I don't know anything about whether the phone was originally a Sprint or AT&T or Rogers or Bell etc phone.
dixxi22
dixxi22 said:
Hi Guys. I'm new to this forum so do excuse me if you find my question stupid or in the wrong thread. I have a Galaxy S5 (SM-G900W8) which I tried rooting some time back. But as a result of the rooting, it has gone into a continuous boot loop. I have tried going back into recovery mode and resetting everything along with clearing the cache but that didn't work, Then I tried unrooting the device using ODIN and the stock ROM downloaded from Sammobile. But it showed failed at the end of the process. I thought that it may be because I may used the wrong ROM so now I'm trying to download the ROM used for unknown variants. My question is if there is any other way that I can use to unbrick my boot looped phone or will I have spend money and take to a service centre?
Any help or advise will be sincerely appreciated. It is worth mentioning here that I don't know anything about whether the phone was originally a Sprint or AT&T or Rogers or Bell etc phone.
dixxi22
Click to expand...
Click to collapse
Try TWRP recovery and flash with ODIN and unpin autoreboot in odin
Thanks for your valuable advise senzatiOn. Much appreciated. I have read about the TWRP recovery and in fact wanted to do that but I believe that there are specific files that are used for this type of recovery. I tried finding the ones suitable for my phone (SM-G900W8) but couldn't. So now if you could please please help me with getting the files and also the procedure to do the recovery using the TWRP method, I would be sincerely obliged.
Thanks
Dixxi22