[Q] Unable to use WiFi/Data after going from NAE to NG2 - Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshoot

After upgrading from NAE (did a full wipe before upgrading), I have lost the ability to use WiFi.
Since upgrading, I have tried full data wipes, flashing the tar file for NG2, also flashing the stock kernel, and modem. After going through the setup (without actually installing any software or setting anything up), I looked at my software version/baseband/etc.
Software Version: L720PUFNAE
Baseband Version: L720PUFNAE
Kernel Version: 3.4.0-2162929 [email protected] #1 (Built Wednesday July 9 09:04:04 KST 2014
Build Number: KOT49H.L720VPUFNG2
Security Software Version: MDF v1.0 Release 2
I have tried flashing the tar two times, tried wiping via TWRP, tried installing other NG2 ROM's, and yet still unable to get WiFi or Data. Is there any way to fix this?

slixzen said:
After upgrading from NAE (did a full wipe before upgrading), I have lost the ability to use WiFi.
Since upgrading, I have tried full data wipes, flashing the tar file for NG2, also flashing the stock kernel, and modem. After going through the setup (without actually installing any software or setting anything up), I looked at my software version/baseband/etc.
Software Version: L720PUFNAE
Baseband Version: L720PUFNAE
Kernel Version: 3.4.0-2162929 [email protected] #1 (Built Wednesday July 9 09:04:04 KST 2014
Build Number: KOT49H.L720VPUFNG2
Security Software Version: MDF v1.0 Release 2
I have tried flashing the tar two times, tried wiping via TWRP, tried installing other NG2 ROM's, and yet still unable to get WiFi or Data. Is there any way to fix this?
Click to expand...
Click to collapse
did you get anywhere with this.???? I am in the sam situation..

cherylbaker said:
did you get anywhere with this.???? I am in the sam situation..
Click to expand...
Click to collapse
I kept flashing the modem, and eventually, it worked.

Related

Need DJ11 baseband/modem file

I followed the directions here: http://forum.xda-developers.com/showthread.php?t=1033586&highlight=
I basically want to return my tab to stock after I rooted it. I followed that guide and everything completed successfully according to heimdall. I wiped data/cache, factory reset.. Then I tried to update with the system update utility on the tab, it fails about 1/3 way through.
I think the baseband/modem is the wrong file. I think I need to use the DJ11 file with the DJ11 rom, can anyone confirm this?
Does anyone have the DJ11 modem.bin file?
Under the About device on the tab it says this:
model number: SCH-I800
Firmware version: 2.2
Baseband Version: S:I800.0.3V.EI04
Kernel version: 2.6.32.9 [email protected] #3
build number: SCH-I800: DJ11
TIA
I'm running into the same problems after stupidly flashing a sprint rom on to my vzw device. I can't get the 3G back working. I've tried 3 different modem.bin files, and they all take me to baseband E104. I'm thinking I need to get the DJ11 modem file so I can flash the entire stock rom image with heimdall and start from scratch again.
I downloaded the Verizon-GTab_Stock.zip that lexriley had posted and extracted everything in it. It looks to be a 100% complete stock dump, including the mode.bin, bootloaders, and.pit file. However, when Heimdall gets to flashing the modem.bin file, it just stops and hangs at 100%..... Any help?
maybe past its usefulness but,
I screwed up my modem file on sch-i800 and was unable to find the original file so...intelligent or not I heimdalled the modem file from the i-500 and it worked. No problems so far. Wish I could post the file but I don't have it anymore. I was able to google it though. Hope this helps.
tg

[Q] 5.0 Update Failure

Hey guys, so I used SuperSU to unroot (which may not have been necessary) and then used Odin to flash back to a stock ROM of 4.4.4. I keep trying to download and install the Lollipop update OTA, and although the download is successful, when I install the update it boots and starts to upgrade before displaying "Error!" and the Android on its back with the front flap open - it then restarts and the system tells me that the update failed.
I could really use some help with this issue, as I've flashed back to stock several times and the update just continues to fail. I'll include the information from the About section of my device. I did verify that there is no root as well, so could it be that I have the wrong stock ROM flashed? Any help would be great. Thanks!
Baseband Version: G900VVRU1ANK7
Kernal Version: 3.4.0, [email protected] #1, Mon Mar 31 13:30:24 KST 2014
Build Number: KTU84P.G900VVRU1ANK7
SE for Android Status: Enforcing, SEPF_SM-G099V_4.4.2_0011, Mon Mar 31 13:30:07 2014
Hardware Version: G900V.05
Security Software Version: MDF v1.0 Release 3, VPN v1.4 Release 2
Same issue here.
I too have this problem; however, I was a fool and simply attempted to update without unrooting or flashing first -- though I was coming from a stock ROM.
Have you tried a full wipe / factory reset? I'm hoping that will fix this...
I was able to get the first update to install however the second one fails everytime. Any idea's?
Same issue here. First update went through no problem, second update downloads, starts to update and fails after 15 seconds or so, reboots and gives the update failed message with a 402 error.
I did try a factory reset and full wipe and still the same issue.
The previous update a few months ago (I can't remember when exactly) I had the same issue and a factory reset worked then to get the update through.
I had this problem when trying to update from NI2 to NK2, although my solution for that was flashing a rooted NK2 rom. For this one you can either a. reroot and flash a rooted version via Safestrap and then Odin the OA8 firmware or b. flash a full stock NK2 tar through Odin and then take the OTA from that. Both of these methods don't require factory wipe (I think) so you shouldn't lose any data.

[Q] Flashing and rooting Official Lollipop on N9005?

Hi,
so official Lollipop just became available on SamMobile, downloading as I type.
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Kingdom (Vodafone)
Version: Android 5.0
Changelist: 3643614
Build date: Tue, 20 Jan 2015 14:05:43 +0000
Product Code: VOD
PDA: N9005XXUGBOA5
CSC: N9005VFGGBOA2
MODEM: N9005XXUGBOA1
1) Coming from CM, should I first wipe/factory reset AND THEN use Odin, or can I go straight to Odin for flashing the firmware?
2) How do I root my phone after Lollipop is flashed?
Appreciate all the info in advance.
Ok I flashed it fine, how do I root the damned thing now? When trying to load the TWRP file inside Odin AP, it takes forever. It's literally taking 15 minutes now, "processing" something in the background after i double-clicked the file. The "AP" button is grayed-out, like it's waiting to load the file somehow. What gives?
Misce said:
Ok I flashed it fine, how do I root the damned thing now? When trying to load the TWRP file inside Odin AP, it takes forever. It's literally taking 15 minutes now, "processing" something in the background after i double-clicked the file. The "AP" button is grayed-out, like it's waiting to load the file somehow. What gives?
Click to expand...
Click to collapse
Try to flash TWRP for your device: HERE via ODIN (seems the latest version 2.8.5.0 have some bugs and don't work correctly) and then root it with CF-Auto-Root.
Tried it, same problem persists. It's stuck at "Checking MD5", and after a minute the whole Odin gets "not responding" and it just sits there like that...
I'm desperate. How do I root my phone?
I even re-flashed the firmware (Lollipop, Polish), SAME THING. Has anyone got any ideas? Please?
After flash lollipop, can you back on kitkat ?
I dont know when you flash lollipop via odin, do you need to re-install custom recovery ?
If you do not have, just enter in recovery and flash SuperSU v2.40
I think you have root after flash SuperSU.
Considering to install and I Lollipop, but do not know will I be able to go back to kitkat, will delete it my PhilZ recovery and how I root my phone ?
Hi
I was on CM12 BlissPoP before I flashed the new 5.0 today. With Odin went back to 4.4.2 KK booted up then back to Odin flashed 5.0 phone booted in less than 2mins. I did lose root and PhilZ so just had to put them back on.
So far all OK just trying to get all the BLOAT out now.
Also OP has a video on the 1st post now if you need help.
Eh that's exactly the problem. I can't flash custom recovery, because it hangs at "Check MD5". It just sits there and nothing happens. Can I root my phone without the custom recovery somehow?

Help Soft bricked and struggling

hi i have a uk ee note 3
Model: SM-N9005
Android Version: 5.0.2
Kernel Version: 3.4.0-gb582336
[email protected] #2
fri feb 6 12:23:39 CET 2015
liquid version LS-LP-v4.0-2015-02-01
i didnt get on with liquid rom so tried flashing back to original stock rom but it failed now leaving my phone soft bricked
odin say invalid ext4 img
my phone says firmware upgrade encountered an issue. please select recovery mode in kies & try again
but kies says my phone is unsupported
please help

(Newbie) I flashed to 5.1.1 can I just restore 6.0.1 backups to go back?

Here is some of my phone info
Galaxy Note 4 SM-N910P
Current version: 5.1.1
Software Version: N910PVPU4COJ6
So as I said in my title I used to have my phone to 6.0.1 that is where I first rooted it and backed up my files. I had been messing around with different versions, even though I know it doesn't really downgrade your phone, I had flashed to 5.1.1 everything was fine the first day i had my phone flashed but then my wifi went to not remembering the password then the next day it isn't connecting at all (stuck in an obtaining ip address loop)
So i was wondering if its possible to use my backup files from 6.0.1 on this version I have now and will it flash my phone back to how it was?
i think restoring complete nandroid backup should work,
but still i'll suggest you to flash stock 6.0.1 rom via odin, then flash custom recovery and then restore your backup.

Categories

Resources