Database Users

accident flash D803 to D801 lol

hi everyone
if your like me and like to flash and flash stuff by accident things that shouldnt be on your varient lol. (my phone is D803 rogers and i managed to flash t-mo onto it and got stuck in fastboot mode. no download mode no recovery possible at all at this point no matter what button sequence i tried instantly fastboot)after hours of research and trial and error. i managed to use a couple programs that helped me boot my phone D803 which now thinks its a D801 and fully boots as T-mo and at this point it booted and my simcard is not a proper sim it says.
anyways the story is i was able to create a zip that turned my D803 which turned into a D801 back into a D803 and save my fastboot bricked device woohoo.
if any1 needs info on how this was done i will write it down when i have a little more time on my hands.
and also i will thank all the people i can that made the forums and tools that were needed for this to be done.
thanks Jester

same
Same here. I had my phone telling me it was the wrong version when I tried to use the lg g2 factory flash tool.

jbabio said:
Same here. I had my phone telling me it was the wrong version when I tried to use the lg g2 factory flash tool.
Click to expand...
Click to collapse
were u able to get it back?

Goto AT&T Dev section, find my poweruser ROM post. In the first post there is a dll that you can use to flash back to your original firmware. Does not check model number...

jester12345 said:
were u able to get it back?
Click to expand...
Click to collapse
Yes, I had to use fastboot and remove system. Once I did this the lg g2 tool allowed me to reflash the phone back to factory.

jbabio said:
Yes, I had to use fastboot and remove system. Once I did this the lg g2 tool allowed me to reflash the phone back to factory.
Click to expand...
Click to collapse
Did the dll file I pointed you to work?

AndroidUser00110001 said:
Did the dll file I pointed you to work?
Click to expand...
Click to collapse
i have not tried it yet. but i downloaded it and will next time i brick my phone im assuming i use the lg flash tool and not the factory kdz flasher?

AndroidUser00110001 said:
Goto AT&T Dev section, find my poweruser ROM post. In the first post there is a dll that you can use to flash back to your original firmware. Does not check model number...
Click to expand...
Click to collapse
Ohhh I will download this. Next time I run into a problem I will use it. Thanks alot and nice work!

D803 question
Hey, kind of related... I'm considering upgrading to the G2 (from Samsung GS2 LTE aka: skyrocket) but i noticed that there isn't a 'D803' or 'rogers' section in the forums. So if i want to flash a custom OS, which versions should i be using? 802? are there dedicated 803 roms and I'm just not seeing them?
Any info would be appreciated.

Jrock_Xtreme said:
Hey, kind of related... I'm considering upgrading to the G2 (from Samsung GS2 LTE aka: skyrocket) but i noticed that there isn't a 'D803' or 'rogers' section in the forums. So if i want to flash a custom OS, which versions should i be using? 802? are there dedicated 803 roms and I'm just not seeing them?
Any info would be appreciated.
Click to expand...
Click to collapse
most roms youll see d800/801/802/803 etc. most cm and aosp are fine i found. just dont do any off the stock kitkat flashing. thats what i did and i got lucky once... i fixed it. but the second time i killed my phone
this site has a few roms made for d803 http://forum.xda-developers.com/showthread.php?t=2611749

Hey what's up. I had this issue happen to me and it was a big pain for me to fix and there is no official fix. This is what I did in order to fix it. You basically need to adb pull your build prop end change the model number to your original number and place it back on your SD card and change your system over to rewrite able and push the new build prop to your system and bam!!!!! Fixed
Sent from my LG-D800 using Tapatalk
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
jester12345 said:
hi everyone
if your like me and like to flash and flash stuff by accident things that shouldnt be on your varient lol. (my phone is D803 rogers and i managed to flash t-mo onto it and got stuck in fastboot mode. no download mode no recovery possible at all at this point no matter what button sequence i tried instantly fastboot)after hours of research and trial and error. i managed to use a couple programs that helped me boot my phone D803 which now thinks its a D801 and fully boots as T-mo and at this point it booted and my simcard is not a proper sim it says.
anyways the story is i was able to create a zip that turned my D803 which turned into a D801 back into a D803 and save my fastboot bricked device woohoo.
if any1 needs info on how this was done i will write it down when i have a little more time on my hands.
and also i will thank all the people i can that made the forums and tools that were needed for this to be done.
thanks Jester
Click to expand...
Click to collapse
The fix is above or quick and works. Trust me
jbabio said:
Same here. I had my phone telling me it was the wrong version when I tried to use the lg g2 factory flash tool.
Click to expand...
Click to collapse
Try what I said up top
AndroidUser00110001 said:
Goto AT&T Dev section, find my poweruser ROM post. In the first post there is a dll that you can use to flash back to your original firmware. Does not check model number...
Click to expand...
Click to collapse
The DLL doesn't work for the d800 I know that for a fact but not sure about the other models
Sent from my LG-D800 using Tapatalk

im guessing my issue was a bit different. as i couldnt even get a download mode.
what i did was use
fastboot used erase laf then flashed all the ones im gonna mention. d803 laf.img flashed that and since i was already flashing laf i flashed all the rest i could find such as recovery aboot etc.follow this thread to do all this if you have lost download mode and but have it stuck in fastboot mode
http://forum.xda-developers.com/showthread.php?t=2477595 thanks to cms88168 for this step by step. just download all images for your device. mine was d803 so i downloaded all d803 imgs.
then you can head over to http://forum.xda-developers.com/showthread.php?t=2483043 and get the DLL file he has made which works with any version i tried 801-802 and 803 tot file. . thanks to AndroidUser00110001 for making this dll file.
you will need to get your model tot file and LGflashtool which can be found it the thread posted above. but please make sure you have your proper tot file. flash that and your good to go. sorry im sure my instructions are all over but should be in right order. im just used to doing not explaining for others. good luck and hope you fix your device

[Q]How do you fix Lg Optimus L3 on bootloop?

I have T-Mobile LG Optimus L3 that was rooted with Kingo without a recovery (I'm a noob). A while ago my phone became irresponsive so I hard-reset it( also because I'm a newb). When I was done, my phone was stuck on bootloop. It would get to the white T-Mobile screen then loop there. I tried using the LG Mobile Support Tool but an error would occur at 4%. I don't know what to do. Can you please help.

It's no big deal.
tmojeed said:
I have T-Mobile LG Optimus L3 that was rooted with Kingo without a recovery (I'm a noob). A while ago my phone became irresponsive so I hard-reset it( also because I'm a newb). When I was done, my phone was stuck on bootloop. It would get to the white T-Mobile screen then loop there. I tried using the LG Mobile Support Tool but an error would occur at 4%. I don't know what to do. Can you please help.
Click to expand...
Click to collapse
Try using the KDZ method to flash your phone. So it will be back to it's stock ROM. You can find the KDZ update method here
PS. If you still have doubts I could walk you through. Cheer up!

Different problem here... e400
I was using Cm9 SDmerge by gellmar, I was flashed V10D Brazil, and o got a bootloop (or recovery) i had never seen, my phone is totally bricked, no hard reset, adb can not recognize my phone, KDZ yes but not solve my problem, the only way is Medusa box? anyone can help me? tnxx

Detroit Inferno said:
Try using the KDZ method to flash your phone. So it will be back to it's stock ROM. You can find the KDZ update method here
PS. If you still have doubts I could walk you through. Cheer up!
Click to expand...
Click to collapse
Thanks but I bull****ed to T-Mobile : angel: so they are going to send me new one. :good:

tmojeed said:
Thanks but I bull****ed to T-Mobile : angel: so they are going to send me new one. :good:
Click to expand...
Click to collapse
That's cool. So you opted the easy way. Huh? Anyways, Just glad that you figured out a solution of your own.
---------- Post added at 12:30 PM ---------- Previous post was at 12:25 PM ----------
lucascerqueira said:
I was using Cm9 SDmerge by gellmar, I was flashed V10D Brazil, and o got a bootloop (or recovery) i had never seen, my phone is totally bricked, no hard reset, adb can not recognize my phone, KDZ yes but not solve my problem, the only way is Medusa box? anyone can help me? tnxx
Click to expand...
Click to collapse
OKay. So you tried out differrent things. But if you could explain briefly why the KDZ did not work for you, it will be much easier to solve the puzzle.
Could you get your phone in emergency mode?

lucascerqueira said:
I was using Cm9 SDmerge by gellmar, I was flashed V10D Brazil, and o got a bootloop (or recovery) i had never seen, my phone is totally bricked, no hard reset, adb can not recognize my phone, KDZ yes but not solve my problem, the only way is Medusa box? anyone can help me? tnxx
Click to expand...
Click to collapse
try this:
http://www.modaco.com/topic/355799-tut-lg-l3-cw-recovery-bootloop-fix/

Detroit Inferno said:
That's cool. So you opted the easy way. Huh? Anyways, Just glad that you figured out a solution of your own.
---------- Post added at 12:30 PM ---------- Previous post was at 12:25 PM ----------
OKay. So you tried out differrent things. But if you could explain briefly why the KDZ did not work for you, it will be much easier to solve the puzzle.
Could you get your phone in emergency mode?
Click to expand...
Click to collapse
I don't know why kdz do not work, i had never seen this, I can put on Emergency Mode but, when KDZ finish flash the phone splash a white screen and back to LG logo, adb says only "device not found" , and fastboot says <waiting for device>

lucascerqueira said:
I don't know why kdz do not work, i had never seen this, I can put on Emergency Mode but, when KDZ finish flash the phone splash a white screen and back to LG logo, adb says only "device not found" , and fastboot says <waiting for device>
Click to expand...
Click to collapse
If the phone is not turning back on even after the KDZ update, then chances are that you have hard-bricked your phone. In the KDZ update, does the log says 'UPDATE SUCCESSFUL' message?.

Detroit Inferno said:
If the phone is not turning back on even after the KDZ update, then chances are that you have hard-bricked your phone. In the KDZ update, does the log says 'UPDATE SUCCESSFUL' message?.
Click to expand...
Click to collapse
No kdz sometimes says "Wparam=100; Lparam=6" and sometimes says only FINISHED but still the error
srry for bad english

lucascerqueira said:
No kdz sometimes says "Wparam=100; Lparam=6" and sometimes says only FINISHED but still the error
srry for bad english
Click to expand...
Click to collapse
"Wparam=100; Lparam=6" are errors denoting that the update was not successful. And the 'finished' message indicates that the process is complete. But, it must show that "Update Successful' in the log. Understand that. Try to re-install the LG mobile drivers and then flash it.

Detroit Inferno said:
"Wparam=100; Lparam=6" are errors denoting that the update was not successful. And the 'finished' message indicates that the process is complete. But, it must show that "Update Successful' in the log. Understand that. Try to re-install the LG mobile drivers and then flash it.
Click to expand...
Click to collapse
thanks for help man, but for me the only way was send it to service center...
it cust me R$140,00 (US$70,00)

Alright dude. Glad for you!..

[help] f320k bricked.

i have a LG G2 [F320K], i rooted my phone then tried updating ota... after that, i got qualcomm 9006 error... i tried the tuts here then i got 9008 error after the hdd tut... i used boarddiag to unbrick it but unfortunately i was stuck at fastboot. i tried tutorials here flashing laf.img but nothing seems work... i also tried booting laf.img but get me back to 9006... then the whole process repeats... i dont know what to do again... i had also don shorting test before cause i also encountered not detected by pc... in short, i encountered all the brick problems of this phone. i need help guys... i am thingking that i am flashing wrong files...

adaptorz said:
i have a LG G2 [F320K], i rooted my phone then tried updating ota... after that, i got qualcomm 9006 error... i tried the tuts here then i got 9008 error after the hdd tut... i used boarddiag to unbrick it but unfortunately i was stuck at fastboot. i tried tutorials here flashing laf.img but nothing seems work... i also tried booting laf.img but get me back to 9006... then the whole process repeats... i dont know what to do again... i had also don shorting test before cause i also encountered not detected by pc... in short, i encountered all the brick problems of this phone. i need help guys... i am thingking that i am flashing wrong files...
Click to expand...
Click to collapse
Don't worry! We'll get you fixed.
Please give me around 20 minutes and I'll extract a few partitions for you to flash. In the meantime, get back to fastboot and plug in your phone to the WALL CHARGER, not PC.
P.S.: LS980 Cloudy fixpack users should see an update soon!
---------- Post added at 05:15 PM ---------- Previous post was at 05:06 PM ----------
adaptorz said:
i have a LG G2 [F320K], i rooted my phone then tried updating ota... after that, i got qualcomm 9006 error... i tried the tuts here then i got 9008 error after the hdd tut... i used boarddiag to unbrick it but unfortunately i was stuck at fastboot. i tried tutorials here flashing laf.img but nothing seems work... i also tried booting laf.img but get me back to 9006... then the whole process repeats... i dont know what to do again... i had also don shorting test before cause i also encountered not detected by pc... in short, i encountered all the brick problems of this phone. i need help guys... i am thingking that i am flashing wrong files...
Click to expand...
Click to collapse
Please tell me the baseband version, ROM, and recovery you were on before the brick. I need this info NOW.

dmezh said:
Don't worry! We'll get you fixed.
Please give me around 20 minutes and I'll extract a few partitions for you to flash. In the meantime, get back to fastboot and plug in your phone to the WALL CHARGER, not PC.
P.S.: LS980 Cloudy fixpack users should see an update soon!
---------- Post added at 05:15 PM ---------- Previous post was at 05:06 PM ----------
Please tell me the baseband version, ROM, and recovery you were on before the brick. I need this info NOW.
Click to expand...
Click to collapse
oh no.... i dont know... i didnt remember...

adaptorz said:
oh no.... i dont know... i didnt remember...
Click to expand...
Click to collapse
Oh. We can still try!
Please tell me your carrier.

dmezh said:
Oh. We can still try!
Please tell me your carrier.
Click to expand...
Click to collapse
is that olleh? we in the philippines have globe/sun/smart(network provider)
on my phone when it starts(before when it is still alive) it displays OLLEH

dmezh said:
Oh. We can still try!
Please tell me your carrier.
Click to expand...
Click to collapse
Carrier does not really matter on F320, I guess. I am having refurbished F320 which had F320K parts and my it was saying F320S under the battery.
I didn't find F320K partitions though. Flashed F320S and it's working fine.

superguy19 said:
Do you have tot or kdz fike for ur model..??
It can be fixed...
U can msg me when u are online...
Click to expand...
Click to collapse
Hi bro" r u there' i need help wit u

I got the kdz for lg g pad 7.0 v410

i have my ways lol this has been tested by me im not a professional or anything so im not gonna explain how to downgrade but all you need is
The Kdz of course : http://www.mediafire.com/download/2433xqabj1k8b8d/V41007h_0.kdz
And LG Flash Tool 2014
i strongly recommend that if you dont know what your doing then dont bother messing with this but also this is pretty easy and only took me about 15-20 minutes to do lol if you need any help pm me on here
And yes this is 4.4.2 i dowgraded from 5.0.2 to 4.4.2

looks like its working for me, in process of rooting now

dopekid313 said:
i have my ways lol this has been tested by me im not a professional or anything so im not gonna explain how to downgrade but all you need is
The Kdz of course : http://www.mediafire.com/download/2433xqabj1k8b8d/V41007h_0.kdz
And LG Flash Tool 2014
i strongly recommend that if you dont know what your doing then dont bother messing with this but also this is pretty easy and only took me about 15-20 minutes to do lol if you need any help pm me on here
And yes this is 4.4.2 i dowgraded from 5.0.2 to 4.4.2
Click to expand...
Click to collapse
Very nice sir! It's about time this leaked! I'd hit thanks more than once if it would let me.
I've never needed it, but always been just a little cautious with this little tablet due to not being able to do a full firmware restore myself.
You should be getting a flood of praise from all the folks who took the lollipop OTA and lost the ability to root and run bumped boot images. :good:

I recommend using timmytim v410 stock rom after downgrading with the kdz because the kdz is simply a test kdz lol so just Google : V410 Stock Rom

Password
Mine asked me for a pin or password to decrypt. What did I do wrong?

drumm3rb0y said:
Mine asked me for a pin or password to decrypt. What did I do wrong?
Click to expand...
Click to collapse
Is your tablet encrypted? You can check by going to settings then security and at the top it should say decrypt..(Or if it's not encrypted then it it will say encrypt) if it saids encrypt then i dont kno what else you can do maybe try reset your tablet or if it saids decrypt simply decrypt it and enter the pin if you forgot it you can probably try resetting your tablet i dont kno if that'll work or not but it should

dopekid313 said:
Is your tablet encrypted? You can check by going to settings then security and at the top it should say decrypt..(Or if it's not encrypted then it it will say encrypt) if it saids encrypt then i dont kno what else you can do maybe try reset your tablet or if it saids decrypt simply decrypt it and enter the pin if you forgot it you can probably try resetting your tablet i dont kno if that'll work or not but it should
Click to expand...
Click to collapse
I think I flashed with the wrong settings selected in the flash tool so I'm flashing again. If that doesn't work then I don't know. I'm coming from cyanogen back down
---------- Post added at 11:19 PM ---------- Previous post was at 11:07 PM ----------
So I don't know what's wrong. It loads and makes the AT&T sound and then next thing I get is a white screen asking me to enter a password or pin. I have never set a password or pin on here for my tablet so I don't know what's up

drumm3rb0y said:
I think I flashed with the wrong settings selected in the flash tool so I'm flashing again. If that doesn't work then I don't know. I'm coming from cyanogen back down
---------- Post added at 11:19 PM ---------- Previous post was at 11:07 PM ----------
So I don't know what's wrong. It loads and makes the AT&T sound and then next thing I get is a white screen asking me to enter a password or pin. I have never set a password or pin on here for my tablet so I don't know what's up
Click to expand...
Click to collapse
Did you use cse flash? With the lg flash tool?

I used normal flash. Should I have used cse? I've flashed before using the old lg flash tools for my phone with a tot file and dll. I tried looking it up and what I found was for the 400.

drumm3rb0y said:
I used normal flash. Should I have used cse? I've flashed before using the old lg flash tools for my phone with a tot file and dll. I tried looking it up and what I found was for the 400.
Click to expand...
Click to collapse
You must use cse bro

So for type cdma and phone mode emergency and after I selected the kdz the cse flash? Sorry for the dumb questions. Like I said I'm used to the older lg flash tools. Just very happy to have this file finally

drumm3rb0y said:
So for type cdma and phone mode emergency and after I selected the kdz the cse flash? Sorry for the dumb questions. Like I said I'm used to the older lg flash tools. Just very happy to have this file finally
Click to expand...
Click to collapse
Put it in download mode then plug it in then open the lg flash tool 2014 and leave everything as is then put the file in the directory then click cse flash then leave the language and stuff as is then just hit start and let everything do its thing sorry if I wasn't too specific but you should be able to figure out out with the details I gave you

Alright for it to load. Just have userdebug in red in the bottom right corner. Feel like I have still done something wrong

drumm3rb0y said:
Alright for it to load. Just have userdebug in red in the bottom right corner. Feel like I have still done something wrong
Click to expand...
Click to collapse
No you did it right its suppose to say that because it's a test kdz lol just root and flash timmytim stock rom

Last question. If I try the software update feature it should connect to the AT&T server and download them?

drumm3rb0y said:
Last question. If I try the software update feature it should connect to the AT&T server and download them?
Click to expand...
Click to collapse
Yeah of course

Got this error [emoji15]

Mervingio said:
Got this error [emoji15]
Click to expand...
Click to collapse
Did you put the phone in download mode before you started?

dopekid313 said:
Did you put the phone in download mode before you started?
Click to expand...
Click to collapse
Yes

Mervingio said:
Yes
Click to expand...
Click to collapse
And did cse flash?

t-mobile v20 h91810p twrp installation help!

I know I need to rollback my version to 10k, however I am stymied by antirollback problems using lgup! I could really use some assistance on getting this to rollback to 10k. I have been reading the forums for 2 days now, hundreds of posts, and nothing works. I cant use the dirty cow method of installing twrp as it was patched and my phone auto downloaded the stupid update... Any help would be much appreciated.
Thanks Zernon916

You can't. You're stuck on P. You said it yourself it is anti roll back.

Gytole said:
You can't. You're stuck on P. You said it yourself it is anti roll back.
Click to expand...
Click to collapse
So no one has rooted it yet?

No

Hopefully it comes soon.

I might have a solution. If you are willing to try.. Let me know.

Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
Lets hear it ehhe

We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp

Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
popwar said:
We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp
Click to expand...
Click to collapse
let me know what you guys did as I could try looking into it

dudeawsome said:
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
let me know what you guys did as I could try looking into it
Click to expand...
Click to collapse
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr

popwar said:
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr
Click to expand...
Click to collapse
so essentially it never actually flashed twrp

dudeawsome said:
so essentially it never actually flashed twrp
Click to expand...
Click to collapse
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.

popwar said:
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.
Click to expand...
Click to collapse
I tried this method out but when i press start the lgup just crashes

dudeawsome said:
I tried this method out but when i press start the lgup just crashes
Click to expand...
Click to collapse
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory

popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
yeah send it over

popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .

popwar said:
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .
Click to expand...
Click to collapse
didnt work sadly

dudeawsome said:
didnt work sadly
Click to expand...
Click to collapse
The link?

popwar said:
The link?
Click to expand...
Click to collapse
no link worked but it didnt flash

dudeawsome said:
no link worked but it didnt flash
Click to expand...
Click to collapse
What does it do/say