Database Users

[Guide] [Video] Flash Android 5.1 Lollipop GPe on Moto G [XT1033 & XT1032] NO ROOT

[Guide] [Video] Flash Android 5.1 Lollipop GPe on Moto G [XT1033 & XT1032] NO ROOT
Here's a complete step-by-step guide to Install the NEW Android 5.1 Lollipop on Motorola Moto G 1st Gen XT1033 and XT1032 Variants.
Backup your phone before following the procedure as you'll loose all your data.
Prerequisites for your Moto G :-
1. Unlocked Bootloader
Prerequisites for your PC (Doesn't work on MAC) :-
1. Motorola Device Manager (Motorola Drivers)
2. Universal ADB Driver
Downloads :-
1. Stock Android to GPe.rar
Mega Link :- http://goo.gl/pl1FHT
Torrent :- http://goo.gl/S1BRqH
2. Android 5.1.rar :- http://goo.gl/wntRZu
3. Motorola Device Manager (Motorola Drivers) :- http://goo.gl/7GLlMo
4. Universal ADB Driver - http://download.clockworkmod.com/test/UniversalAdbDriverSetup6.msi
5. Network Fix Only - http://www24.zippyshare.com/v/IsBlxpni/file.html
Youtube Video :- https://www.youtube.com/watch?v=vPwsdN66spM
Complete Guide (In case, you didn't Understand something in the Video)
1. First download and extract the two files a)Stock Android to GPe.rar and b)Android 5.1.rar
2. Power Off! your phone and boot to bootloader mode by pressing Volume Down Key and Power button simultaneously and connect it to your PC.
3. In the Stock Android to GPe folder (that you extracted) run the Android 5.x TO 4.4.4 GPE.bat file if you are on any Android Lollipop version or ANY KK FIRMWARE TO 4.4.4 GPE.bat if you are on Kitkat.
4. After the flashing is complete and Moto G boots into the Android 4.4.4 Welcome screen , just POWER OFF the device.
5. Again boot into Bootloader and then Press the Volume Down Button followed by Volume UP button to select Recovery.
When you see the Android logo with Exclamation mark, HOLD the Volume UP button and then press the Power button (1-2 times) to boot into Stock Recovery.
Now press Volume Down Button followed by Power button to select "Install Update from ADB".
6. Now connect your phone to PC.In the Stock Android to GPe folder (that you extracted) run the SIDELOAD LOLLIPOP.bat file to sideload Android 5.0.1 GPe.
7. After it is complete and you see "Install from ADB Complete" on your phone select Reboot System by pressing the Power Button.
8. After the flashing is complete and Moto G boots into the Android 5.0.1 Welcome screen , FOLLOW STEPS 4-5 AGAIN.TO GET INTO RECOVERY THIS TIME, PRESS THE POWER BUTTON AND THEN THE VOLUME UP BUTTON INSTEAD OF HOLDING VOLUME UP AND THEN PRESSING THE POWER BUTTON.
9. Now connect your phone to PC.In the Android 5.1 folder (that you extracted) run the Install OTA.bat file to sideload Android 5.1 GPe.
10. After it is complete and you see "Install from ADB Complete" on your phone select Reboot System by pressing the Power Button.
You have successfully Installed ANDROID 5.1 on your MOTO G.
NETWORK FIX (ONLY FOR XT1033 USERS) :-
1. After the flashing is complete and Moto G boots into the Android 5.1 Welcome screen , just POWER OFF the device.
2. Boot into Bootloader and Run the NETWORK FIX.bat from XT1033 folder in Stock Android to GPe folder.
3. Reboot
That's it..
Enjoy your smooth and fast new LOLLIPOP....
Frequently Asked Questions (FAQ) :-
1. Why is the Stock Android to GPe.rar 800 MB in size?
Ans - It has both Android 4.4.4 GPe and Android 5.0.1 GPe firmware zip files.So,it is 800MB in size.
2. Why do I need to flash Android 5.1 when I already have Android 5.0.2 Lollipop?
Ans - .As you know , we all are fed up with the stock Android Lollipop 5.0.2 since it has so many bugs.Android 5.1 GPe provides True Lollipop experience.It is 100% Smooth and Bugless.
3. Will both the sims work for the Moto G XT1033?
Ans - No, only single sim will work.Android 5.1 GPe doesn't support Dual Sim.

Thanks a lot man....
Very helpful guide..I have been looking for this for the last 2 days..
Great Step-by-Step Explanation!!

working method and all links
@gargsamanyou thanks a lot dear...complete guide... :good:

nworoid said:
@gargsamanyou thanks a lot dear...complete guide... :good:
Click to expand...
Click to collapse
Yup, worked for me...Just flashed it..

I am already on GPE 5.0.1 on my XT1033....i flashed it in december itself...Now when i try to sideload 5.1 on my device it shows an Error 7 status and the installation aborts...what to do?

Aneek95 said:
I am already on GPE 5.0.1 on my XT1033....i flashed it in december itself...Now when i try to sideload 5.1 on my device it shows an Error 7 status and the installation aborts...what to do?
Click to expand...
Click to collapse
That's because of the mismatching of the modems.
Follow my guide.When you have successfully updated to Android 5.1 then flash the network fix for XT1033 from the files given above.

nworoid said:
@gargsamanyou thanks a lot dear...complete guide... :good:
Click to expand...
Click to collapse
Glad I could help.

Hey could you please upload only XT1033 folder for network issue? I don't wanna download the entire gpe folder, as i already have it
And those who are unable to enter stock recovery after 5.0.1. Press power button for few seconds and then volume up button. Combo is changed in lollipop.
Thank you

Is it possible to go back to stock rom from 5.1 GPE ??

soo i have convert my XT1033 and now its on GPE Lollipop 5.0.1 and rooted, i tried flash the 5.1 and it doesn't work even i have unrooted it again. any idea how i done it ?

I had same problem (with rooted 5.0.1 gpe) i go back to stock 5.02. Back to 4.4.4 GPE ->4.4.4stock-5.0.2stock .When i downgrade to 4.4.4 gpe i was trying to upgrade to 5.0.1 gpe but i had error 7 (modem) so i go back to stock.

Cannot download the files from the link
please provide alternate link to download, i cant download anything from mega.co.nz
please help.
---------- Post added at 12:41 PM ---------- Previous post was at 12:32 PM ----------
i am using xt1033, so if we flash 4.4.4 gpe directly will it leads to any issues like bricking, and lastly if we do a network fix, what about the future updates. will i continuously recieve updates, and if i install any updates in future will it leads to any issues, since we have already fix the network drivers..
please clarify..

How can i revert back to stock ROM in future. or can i directly flash CM12 for Xt1033 and other XT1033 ROMs.
If i can't directly flash can i use these guides to get back to stock ROM
http://forum.xda-developers.com/moto-g/general/guide-moto-g-xt1033-brazilian-lollipop-t3001535
http://forum.xda-developers.com/showthread.php?t=2700502

krv5vignesh said:
How can i revert back to stock ROM in future. or can i directly flash CM12 for Xt1033 and other XT1033 ROMs.
If i can't directly flash can i use these guides to get back to stock ROM
http://forum.xda-developers.com/moto-g/general/guide-moto-g-xt1033-brazilian-lollipop-t3001535
http://forum.xda-developers.com/showthread.php?t=2700502
Click to expand...
Click to collapse
Yes, you can use the 1st method to revert back.

varunvijay89 said:
please provide alternate link to download, i cant download anything from mega.co.nz
please help.
---------- Post added at 12:41 PM ---------- Previous post was at 12:32 PM ----------
i am using xt1033, so if we flash 4.4.4 gpe directly will it leads to any issues like bricking, and lastly if we do a network fix, what about the future updates. will i continuously recieve updates, and if i install any updates in future will it leads to any issues, since we have already fix the network drivers..
please clarify..
Click to expand...
Click to collapse
You won't brick ur phone if u follow the guide step-by-step. Whenever new update is released (which won't be released since Android 5.1 is the last update for Moto G) you can flash back stock Android 4.4.4 and then update it using the usual method easily.

yonasz said:
I had same problem (with rooted 5.0.1 gpe) i go back to stock 5.02. Back to 4.4.4 GPE ->4.4.4stock-5.0.2stock .When i downgrade to 4.4.4 gpe i was trying to upgrade to 5.0.1 gpe but i had error 7 (modem) so i go back to stock.
Click to expand...
Click to collapse
That error if due to incompatible network modems.If you follow the guide step-by-step, you will not get that error.

oddie95 said:
soo i have convert my XT1033 and now its on GPE Lollipop 5.0.1 and rooted, i tried flash the 5.1 and it doesn't work even i have unrooted it again. any idea how i done it ?
Click to expand...
Click to collapse
Your XT1033 with Android 5.0.1 GPe has XT1033 network modems installed which will not allow you to update to Android 5.1.
So, just flash 4.4.4 GPe >> 5.0.1 GPe >> Sideload 5.1 and then flash the network fix for XT1033 as given in the Guide.

yonasz said:
Is it possible to go back to stock rom from 5.1 GPE ??
Click to expand...
Click to collapse
Yes, follow this guide :-
http://forum.xda-developers.com/moto-g/general/guide-moto-g-xt1033-brazilian-lollipop-t3001535

gargsamanyou said:
You won't brick ur phone if u follow the guide step-by-step. Whenever new update is released (which won't be released since Android 5.1 is the last update for Moto G) you can flash back stock Android 4.4.4 and then update it using the usual method easily.
Click to expand...
Click to collapse
please provide an alternate link

himanshu_941 said:
Hey could you please upload only XT1033 folder for network issue? I don't wanna download the entire gpe folder, as i already have it
And those who are unable to enter stock recovery after 5.0.1. Press power button for few seconds and then volume up button. Combo is changed in lollipop.
Thank you
Click to expand...
Click to collapse
Added the link for Network Fix to the OP.
Sorry forgot to mention the new combo in the guide although it's mentioned in the video.

[TWRP 2.8.7.0][ROOT][SM-T231] Install TWRP and ROOT your Samsung Galaxy Tab 4 7.0

INSTALL TWRP AND ROOT
YOUR GALAXY TAB 4​​​​
This is for Galaxy Tab 4 7.0 SM-T23x / NU models.
New Updet : Flasheble TWRP 2.8.7.0 Download Link is given at the end of the thread.
Code:
WARNING:
1. Warranty will be void if you install a Custom Recovery and ROOT your device.
2. I am not responsible for any thing wrong happen with your device. Do this at your own risk.
3. If you blame me, I will lough at you.
4. But you can always PM me or comment here if any thing wrong happen to your device. I will try to help you.
REQUIRED:
PC
Data Cable
Your TAB 4
Some Basic Knowledge (very important!!)
A working Brain !!!! (It is inside your head)
INSTRUCTIONS:
First of all you have to download the ROOT Samsung Galaxy TAB 4 v4.zip from HERE.
My zip contains :
Odin_v3.09
SAMSUNG_USB_Driver.exe
recovery.tar.md5
UPDATE-SuperSU.zip
Extract the zip.
Install Samsung USB driver (Given in the zip) on your pc if you don't have this. If you have already installed the driver, ignore this step.
Now, lets start installing TWRP...
Open ODIN in your PC.
Put your Tablet in download mode by Pressing the Home button + Power + Volume Down. Release buttons ,when you see a warning ; then press the volume up (vol +) to continue to download mode.
Connect your Tablet to your PC
There is a option named 'AP' in the ODIN . Just tick that and click on 'AP'.
Now Select the recovery.tar.md5 file from the extracted zip.
Now you have to untick the Auto Reboot option in the ODIN. Otherwise the TWRP wouldn't start in the recovery mode.
Press START Button in the ODIN.
Wait till flashing is finished.
After flashing is finished, don't unplug, turn off or restart your device. Press and hold Home button + Power + Volume Up button untill your device restart into the recovery mode.
Now just reboot your device from recovery.
ROOTING PROCESS :
FIRST OF ALL YOU HAVE TO TRANSFER THE UPDATE-SuperSU.zip FILE( I have given in the zip) IN THE INTERNAL MEMORY OF YOUR TABLET
BOOT INTO RECOVERY MODE BY PRESSING POWER BUTTON+HOME BUTTON+VOLUME UP BUTTON
NOW SELECT INSTALL
CHOOSE THE UPDATE-SuperSU.zip FROM THE INTERNAL MEMORY OF YOUR TABLET
FLASH THE FILE AND THEN RESTART YOUR TABLET
[NEW UPDATE]
Flashable zip of TWRP 2.8.7.0 :
29/07/2014
If you have TWRP 2.8.0.1 or lower installed, you can flash the TWRP 2.8.7.0 to updet directly !! :laugh:
You Can Download the flasheble zip from HERE. just flash the zip and enjoy TWRP 2.8.7.0 . ​
Bugs of TWRP 2.7.8.0 :
Probably MTP is not working Fixed
Unable to restore backups Fized
Can't clear Cache partition from wipe option Fixed
ExtSdCard is not showing Fixed
Meny Thanks & Credits:
TeamWin for this beautiful recovery.
@reas0n for the TWRP 2.8.7.0 Recovery img and all fixing.
:angel: :good:
DON'T FORGET TO GIVE A THANKS, IF YOU FOUND THE POST HELPFUL
:good: :angel:​

Why are you reposting this?
And why are you linking through adfly?
The files in question are linked/contained in this google docs account listing
file/d/0B0K2_1KLOf0ddnUydGplTEpUd2s/edit
is this your build ? or is this copied from someone elses archives?

moonbutt74 said:
Why are you reposting this?
And why are you linking through adfly?
The files in question are linked/contained in this google docs account listing
file/d/0B0K2_1KLOf0ddnUydGplTEpUd2s/edit
is this your build ? or is this copied from someone elses archives?
Click to expand...
Click to collapse
Agreed.
Links through adfly = getting money from people clicking that adfly link. Which I believe isn't at all allowed on xda (advertisement links). So.... I'm unsure about this post... ?

I am sorry...
DUHAsianSKILLZ said:
Agreed.
Links through adfly = getting money from people clicking that adfly link. Which I believe isn't at all allowed on xda (advertisement links). So.... I'm unsure about this post...
Click to expand...
Click to collapse
Should i give the original google doc link?? I am new in xda. So please help me..

moonbutt74 said:
Why are you reposting this?
And why are you linking through adfly?
The files in question are linked/contained in this google docs account listing
file/d/0B0K2_1KLOf0ddnUydGplTEpUd2s/edit
is this your build ? or is this copied from someone elses archives?
Click to expand...
Click to collapse
But I did not copy any thing from someones post... :crying:

I chenged the link
moonbutt74 said:
Why are you reposting this?
And why are you linking through adfly?
The files in question are linked/contained in this google docs account listing
file/d/0B0K2_1KLOf0ddnUydGplTEpUd2s/edit
is this your build ? or is this copied from someone elses archives?
Click to expand...
Click to collapse
I chenged the link with the original google doc link. Now is this ok??

BRoy_98 said:
I chenged the link with the original google doc link. Now is this ok??
Click to expand...
Click to collapse
Okay, you're getting there , now why is there a password on the archive?

moonbutt74 said:
Okay, you're getting there , now why is there a password on the archive?
Click to expand...
Click to collapse
Its not for any special reason.. I just gave this...

New Recovery
BRoy_98 said:
Its not for any special reason.. I just gave this...
Click to expand...
Click to collapse
Is this latest recovery?

[email protected] said:
Is this latest recovery?
Click to expand...
Click to collapse
Yup... I think so...

BRoy_98 said:
Yup... I think so...
Click to expand...
Click to collapse
Think???? Aren't you suppose to be the one who should know this ?

ssanjy said:
Think???? Aren't you suppose to be the one who should know this ?
Click to expand...
Click to collapse
Nice Joke..!!!
It is the latest recovery..!!

work this with a german sm-t230 ?
greetings

w32parite said:
work this with a german sm-t230 ?
greetings
Click to expand...
Click to collapse
No, go into the general section and look for the thread with your model number (SM-T230)
Edit: You need this thread

thx a lot.

BRoy_98 said:
Nice Joke..!!!
It is the latest recovery..!!
Click to expand...
Click to collapse
Twrp updated in the link? I assume so and downloading
Sent from my SM-T231 using XDA Free mobile app

It worked!
My device is SM T231
android 4.4.2
Bought it, didn't update or anything
Downloaded your zip files, and scanned with antivirus (eset)- was clean.
Turned of antivirus and firewall.
Did everything in the post.
Changed the following (guide for extreme noobs)- that's me
Downloaded zip
open odin
Switched off before putting in download mode.
Put Tablet in download mode by Pressing the Home button + Power + Volume Down. Release buttons ,when you see a warning -DON'T PANIC -WAIT FEW SECONDS then press the volume up (vol +) to continue to download mode.
Connect your Tablet to your PC
Now you have to untick the Auto Reboot option in the ODIN. Otherwise the TWRP wouldn't start in the recovery mode.
Copy recovery.img.tar.md5 to C:
There is a option named 'BL' in the ODIN . Just tick that and click on 'BL'.
Now Select the recovery.img.tar.md5 file from the extracted zip.
Press START Button in the ODIN.
Wait till odin software says "RESET"
Press and hold Home button + Power + Volume Up button until your device restart into the recovery mode.
Click reboot
click system
Swipe when it asks swipe to install
Phone will reboot and open normally
Odin software will say "PASS"
ROOTING
Connect Tab to computer and paste SUPERUSER.ZIP into documents folder of Tab
BOOT INTO RECOVERY MODE BY PRESSING POWER BUTTON+HOME BUTTON+VOLUME UP BUTTON
NOW SELECT INSTALL
Select Documents folder
Select SUPERUSER.ZIP
Swipe when it asks (I forgot whether it will tell "swipe to install" or "swipe to flash"
It will say "Successful"
Select Reboot to System
Done

j55555 said:
There is a option named 'BL' in the ODIN . Just tick that and click on 'BL'.
Click to expand...
Click to collapse
No. I'm glad it worked out for you in this one specific instance, but you should be using the AP button, not the BL button to flash a custom recovery. Please edit this in your post, you shouldn't be giving other new users potentially dangerous and erroneous advice

w32parite said:
work this with a german sm-t230 ?
greetings
Click to expand...
Click to collapse
Yes. It will work for SM-T230

thisisapoorusernamechoice said:
No. I'm glad it worked out for you in this one specific instance, but you should be using the AP button, not the BL button to flash a custom recovery. Please edit this in your post, you shouldn't be giving other new users potentially dangerous and erroneous advice
Click to expand...
Click to collapse
What is the defense between BL & AP ? BL is working always for me.

Moto G 2015 XT1550 New OTA Update Link

Hi,
Today I got an update for Moto G 2015. Here I am posting the OTA download link.
Blur_Version.23.46.4.osprey_retasia_ds_2gb.retasia.en.03 (57 MB)
Copy the OTA file to the root of your Internal Storage and please flash it using stock recovery.

How to do that step by step.instructions please

Change log please ?

Dhamukanna said:
Hi,
Today I got an update for Moto G 2015. Here I am posting the OTA download link.
Blur_Version.23.46.4.osprey_retasia_ds_2gb.retasia.en.03 (57 MB)
Copy the OTA file to the root of your Internal Storage and please flash it using stock recovery.
Click to expand...
Click to collapse
Hi, the OTA update that I received today morning on my phone says - New version is 23.51.65.en.03.
Highlights of this update include:
* Closes a potential security vulnerablity (Stagefright)
*Adds Night Mode to the Camera application
*Bug fixes and other stability improvements
Are you sure this is the same OTA capture that your link refers to?

Yes Same OTA..
This is second and latest OTA update for Moto G 2015.

Flashing Instructions
banerjeeayan1996 said:
How to do that step by step.instructions please
Click to expand...
Click to collapse
For Stock Unrooted Phones:
1. Copy the OTA file to the root of the Internel Storage
2. Power Off The Phone.
3. Start the Phone to Fastboot mode (Press and keep Volume down and Power button).
4. Select Recovery Mode from the menu using Vol up button and Press Power button to enter into Recovery.
5. Select Apply Update from SD card and select OTA file. Wait for the update to complete and then reboot.
For Phones running TWRP or Rooted, Xposed Phones, Please flash Stock ROM, and then flash OTA and then root, install TWRP, Xposed etc..,

Dhamukanna said:
For Stock Unrooted Phones:
1. Copy the OTA file to the root of the Internel Storage
2. Power Off The Phone.
3. Start the Phone to Fastboot mode (Press and keep Volume down and Power button).
4. Select Recovery Mode from the menu using Vol up button and Press Power button to enter into Recovery.
5. Select Apply Update from SD card and select OTA file. Wait for the update to complete and then reboot.
For Phones running TWRP or Rooted, Xposed Phones, Please flash Stock ROM, and then flash OTA and then root, install TWRP, Xposed etc..,
Click to expand...
Click to collapse
Thanks. The steps are clear enough. For stock unrooted phones either we download the file from your link or directly upgrade the OTA way.
Your link will help those who have not received the OTA update yet.
After flashing stock recovery,I tried unrooting the phone from inbuilt unrooting option of SuperSU but this does not work. You need to be on stock to match the keys. Some how the fingerprint changes if you modify the system. OTA is installed only when the fingerprint of phone rom corresponds to that of the stock rom.
Cheers..

Dhamukanna said:
Hi,
Today I got an update for Moto G 2015. Here I am posting the OTA download link.
Blur_Version.23.46.4.osprey_retasia_ds_2gb.retasia.en.03 (57 MB)
Copy the OTA file to the root of your Internal Storage and please flash it using stock recovery.
Click to expand...
Click to collapse
You, my good Sir, are a true Gentleman!!! Thank you for sharing!!

There is already a thread for OTA links. You can post the links there in future and keep the thread clean...
http://forum.xda-developers.com/2015-moto-g/general/ota-moto-g-indian-thread-xt1550-t3200726

Dhamukanna said:
For Stock Unrooted Phones:
1. Copy the OTA file to the root of the Internel Storage
2. Power Off The Phone.
3. Start the Phone to Fastboot mode (Press and keep Volume down and Power button).
4. Select Recovery Mode from the menu using Vol up button and Press Power button to enter into Recovery.
5. Select Apply Update from SD card and select OTA file. Wait for the update to complete and then reboot.
For Phones running TWRP or Rooted, Xposed Phones, Please flash Stock ROM, and then flash OTA and then root, install TWRP, Xposed etc..,
Click to expand...
Click to collapse
In recovery mode it says no command. Please help

..::Matr!x::..
banerjeeayan1996 said:
In recovery mode it says no command. Please help
Click to expand...
Click to collapse
when you are in stock recovery mode press and leave pressed power button then press also vol+ button ... then all recovery commands appears ... select apply update ...
here is a video
https://www.youtube.com/watch?v=UpRZZ0PBoCg

Recovery Mode
banerjeeayan1996 said:
In recovery mode it says no command. Please help
Click to expand...
Click to collapse
1. With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
2. Press the Volume Down button to highlight "Recovery mode"
3. Press the Power button to restart into Recovery mode. You'll see an image of an Android robot with a red exclamation mark.
4. While holding down the Power button, press the Volume Up button.

..::Matr!x::.. said:
when you are in stock recovery mode press and leave pressed power button then press also vol+ button ... then all recovery commands appears ... select apply update ...
here is a video
https://www.youtube.com/watch?v=UpRZZ0PBoCg
Click to expand...
Click to collapse
Dhamukanna said:
1. With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
2. Press the Volume Down button to highlight "Recovery mode"
3. Press the Power button to restart into Recovery mode. You'll see an image of an Android robot with a red exclamation mark.
4. While holding down the Power button, press the Volume Up button.
Click to expand...
Click to collapse
I have reached recovery mode but cant update it is says fingerprint maych failed.

Moto G3 manual update
I didn't get the first OTA update. Is it safe for me to install the second OTA update by downloading a link to it?I am unrooted but I never recieved an update to my device.
Can I get future FOTA updates after updating manually (installing zip from SD card)?
Device: Moto G3.

any one send stock recovery link

debopriyobasu said:
I didn't get the first OTA update. Is it safe for me to install the second OTA update by downloading a link to it?I am unrooted but I never recieved an update to my device.
Can I get future FOTA updates after updating manually (installing zip from SD card)?
Device: Moto G3.
Click to expand...
Click to collapse
Yes You are safe to install this OTA update. You will receive future OTA updates as well.

Fingerprint Mismatch
banerjeeayan1996 said:
I have reached recovery mode but cant update it is says fingerprint maych failed.
Click to expand...
Click to collapse
Hi,
You need to have stock recovery to flash OTA updates. Rooted, Custom Recovery Flashed / Xposed devices must be flashed with stock rom to be able to install OTA updates.
You will get Stock roms on XDA..

Dhamukanna said:
Yes You are safe to install this OTA update. You will receive future OTA updates as well.
Click to expand...
Click to collapse
Hello! Please assist me. Update from recovery mode by installing zip is failing.
Device: Moto G3.
Build no:LPI23.72-47.
System version:23.41.47osprey_retasia_ds_2gb.retasia.en.03 retin
Procedure followed: copied zip to internal storage root folder. Rebooted phone to recovery mode and selected apply update from SD card.
Logs:
qe o/o
--Install/data/media/0/Blur_Version.2.31.33.osprey_retasia_ds_2gb.retasia.en03.zip...
Finding update package....
Opening update package...
Verifying update package....
Installing update....
Package expects build fingerprint of Motorola/osprey_retasia_ds_2gb/osprey_ud2:5.1.1/LPI23.72-47.4/5:user/release-keys;
this device has Motorola/osprey_retasia_ds_2gb/ospre
E: Error in/sideload/package.zip
(Status 7)
Installation aborted.

Dhamukanna said:
Hi,
You need to have stock recovery to flash OTA updates. Rooted, Custom Recovery Flashed / Xposed devices must be flashed with stock rom to be able to install OTA updates.
You will get Stock roms on XDA..
Click to expand...
Click to collapse
I am not rooted and I am on stock recovery. But it is not flashing. Maybe because of different build version.

banerjeeayan1996 said:
I am not rooted and I am on stock recovery. But it is not flashing. Maybe because of different build version.
Click to expand...
Click to collapse
This is Second OTA for Moto G 2015. Firstly, You should flash first OTA file (177 MB) which you can find in General Section. After that you can flash second OTA file

android 6.0 update for moto g 3rd gen for indian

sorry guys i updated the another ones
i mistakenly i deleted the ota update sorry guys

the one uploaded in mediafire is version 23.51.65.
but the update received shows 24.11.25.en.03.
pls check the zip file

OTG WORKS?
Sent from my MotoG3 using Tapatalk

How to flash??
---------- Post added at 01:26 AM ---------- Previous post was at 01:25 AM ----------
krish_alone99 said:
the one uploaded in mediafire is version 23.51.65.
but the update received shows 24.11.25.en.03.
pls check the zip file
Click to expand...
Click to collapse
While flashing the .zip of mediafire,it gave fingerprint error
---------- Post added at 01:32 AM ---------- Previous post was at 01:26 AM ----------
krish_alone99 said:
the one uploaded in mediafire is version 23.51.65.
but the update received shows 24.11.25.en.03.
pls check the zip file
Click to expand...
Click to collapse
The above given link is of 23.51.65

no bro. that one i capture the update
krish_alone99 said:
the one uploaded in mediafire is version 23.51.65.
but the update received shows 24.11.25.en.03.
pls check the zip file
Click to expand...
Click to collapse

Well ota works .. Updated my Moto now running android 6.0

How to flash the ota??

please add to op.
1) Download ***Latest*** 6.0 OTA for XT1550 --->http://www.mediafire.com/?53xbvam3e4i3tmy
2) Copy it to sd card
3) Power off phone
4) Press Volume Up+Down and Power Key for around 5 seconds.
5) Scroll Up/Down using Volume key and go to recovery
6) You will get a no command message
7) Press Power + Volume Up together for 1-2 seconds
8) Go To Cache Clean
9) Wait for 20-30 minutes
10) After process done, click on update from sd card
11) Lo & Pronto you should be updated to marshmallow from lollipop

milindthakker said:
please add to op.
1) Download ***Latest*** 6.0 OTA for XT1550 --->http://www.mediafire.com/?53xbvam3e4i3tmy
2) Copy it to sd card
3) Power off phone
4) Press Volume Up+Down and Power Key for around 5 seconds.
5) Scroll Up/Down using Volume key and go to recovery
6) You will get a no command message
7) Press Power + Volume Up together for 1-2 seconds
8) Go To Cache Clean
9) Wait for 20-30 minutes
10) After process done, click on update from sd card
11) Lo & Pronto you should be updated to marshmallow from lollipop
Click to expand...
Click to collapse
I am on Stock ROM but Blu Spark Kernel.. I think this is the reason which caused failed in update process.. Is there anyway to get back Stock Kernel..

FPThatea said:
I am on Stock ROM but Blu Spark Kernel.. I think this is the reason which caused failed in update process.. Is there anyway to get back Stock Kernel..
Click to expand...
Click to collapse
Hard Reset will remove the Kernel....
Sent from my MotoG3 using Tapatalk

Could someone make a flash able zip or a backup that can be used with twrp? Please!!

Hey guys I need lollipop Indian version twrp backup I wanted to downgrade from MM

milindthakker said:
please add to op.
1) Download ***Latest*** 6.0 OTA for XT1550 --->http://www.mediafire.com/?53xbvam3e4i3tmy
2) Copy it to sd card
3) Power off phone
4) Press Volume Up+Down and Power Key for around 5 seconds.
5) Scroll Up/Down using Volume key and go to recovery
6) You will get a no command message
7) Press Power + Volume Up together for 1-2 seconds
8) Go To Cache Clean
9) Wait for 20-30 minutes
10) After process done, click on update from sd card
11) Lo & Pronto you should be updated to marshmallow from lollipop
Click to expand...
Click to collapse
Can you make Nandroid Backup/ complete twrp backup of Marshmallow and please update the link.

I'd like a link to this also.. 2gb version

Sony.Z2.D6503.PreRooted.Customized.AU.1281-9715.23.5.A.1.291 (Root+Recovery)(LB/UB)

Info :
Greetings and Welcome. Here's the latest firmware update for Sony Z2(D6503) Build23.5.A.1.291_R4D with (Recovery + Root)
Enjoy!
How To Flash :
Method 1 Clean Flash :
1. Download Prerooted Rom + Bootloop Fix and place them on ur device storage,
2. Reboot to Recovery,
3. Do A Full Wipe Except the storage partition where u put Prerooted Rom + Bootloop Fix,
4. Flash Prerooted Rom and then Bootloop Fix
5. Reboot.
Method 2 Dirty Flash Over Previous Build Of Android MM :
1. Download Prerooted Rom + Bootloop Fix and place them on ur device storage,
2. Reboot to Recovery,
3. Flash Prerooted Rom and then Bootloop Fix,
4. Wipe Cache And Dalvik/Art
5. Reboot.
6. After Finishing booting process wait a few mins,
7. Now go to app drawer and check if supersu is there or not, If not then simply download it from google play store and install it and open it and select SU Binary install normal & Click Reboot,
8. Enjoy!
Stuff Used to Create This Pre-rooted Room :
D6503_Customized AU_1281-9715_23.5.A.1.291_R4D
PRFCreator_v1.3
UPDATE-SuperSU-v2.76-SYSTEMMODE
RecRootV4_combined
My Dell Laptop,
A Keyboard + Mouse,
My Experiences With This Build Of Android MM :
Now We can transfer apps to "EXTSDCARD" using "Transfer data to SD card"
STAMINA mode is back
Multi Tasking Is better than Previous Build Of Course XD
Significantly faster & smoother than previous build (23.5.A.0.575)
Screen Recording Error still exist
Anything Else? :good:
Download Links :
Rom : Click On ME
Bootloop Fix : Click On ME
Screenshots :
http://imgur.com/a/i7icA
Instead of Typing Thanks, You can simply press on it :good:, Try not to spam this thread, If u have any Question regarding my upload Ask here.

First Comment
Keep Up Bro (Y)

Thank you. ?

Thanks!

I'll try to build the same file but for Customized FR (my country) !

Why bootloop fix from 570 build need to flashed too ?
Sent from my D6503 using Tapatalk

itsnie said:
Why bootloop fix from 570 build need to flashed too ?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Because that's a life saver for Z2 with Prerooted rom. That's the only bootloop fix exist here on xda for now. Can you try flashing without it at see if it boots? And report back here! Unless u wanna waste some times on re-flashing LP rom and rooting it again to get back on a rooted mm rom

Will previous D6502 patches work?

RICdefeat & byeselinux
Have you used byeselinux & RICdefeat in the firm compilation??
Or only the bootloopfix?
Thank you

supercfc said:
Will previous D6502 patches work?
Click to expand...
Click to collapse
Can't say since I don't have a D6502 Model. Try and let me know if it works

LunaFree said:
Have you used byeselinux & RICdefeat in the firm compilation??
Or only the bootloopfix?
Thank you
Click to expand...
Click to collapse
"RecRootV4_combined" Include all of those stuff as well as recovery

@op
Will dummy_flashable.zip works as well making the ZIP? im on .575 with root and recovery. i have already downloaded the ftf before seeing this post

Thank you so much!!!!

So I finally made the same thing for the french firmware !
https://www.wetransfer.com/downloads/9d69b9f8a30da16970abc3f5655fa01720160804144653/d99f41

Dilesh Perera said:
@op
Will dummy_flashable.zip works as well making the ZIP? im on .575 with root and recovery. i have already downloaded the ftf before seeing this post
Click to expand...
Click to collapse
As I already said "RecRootV4_combined" Includes Root + Recovery. So u don't need anything else. Except Bootloop Fix

rakeshbro said:
"RecRootV4_combined" Include all of those stuff as well as recovery
Click to expand...
Click to collapse
I've do my compilation with 23.5.A.1.291 firmware using the ITALIAN customized and SUPERSU with PRF creator.
I've install busybox from appstore and DUAL recovery with the install.bat from pc and then in RECOVERY MODE i´ve flashed byeselinux+RICdefeat without bootloopfix, and works too!!
Thank you Rakeshbro!! :good::good:

LunaFree said:
I've do my compilation with 23.5.A.1.291 firmware using the ITALIAN customized and SUPERSU with PRF creator.
I've install busybox from appstore and DUAL recovery with the install.bat from pc and then in RECOVERY MODE i´ve flashed byeselinux+RICdefeat without bootloopfix, and works too!!
Thank you Rakeshbro!! :good::good:
Click to expand...
Click to collapse
Yeah I saw some feedback on "23.5.A.0.575" build as well that some ppl didn't flashed bootloop fix and they got it boot.
But for me I'd to flash bootloop fix to get into os. I remember Last time when I was on MM build "23.5.A.0.570_R4D" I've like 350+ apps installed on my z2 and after a few weeks later Build "23.5.A.0.575" came out. And guess what I've flashed it without the bootloops fix and that's it, I got stucked on lockscreen and whenever I unlock my device it just reboot again & again, And I can't even boot to recovery. With a broken heart I've to flash LP rom again and root it and then flash the latest MM build. I just did't want to take that risk again this time, since I've now more than 360+ apps installed on my Z2. So It's upto All of u guys. U want to flash the old bootloop fix or not. Try and let us know Good Luck!

Yeah you need bootloop fix. The same thing happened to me but I just pressed volume button during the bootloop, I entered TWRP, connected to USB, copied bootloop fix and flashed it without reinstalling everything

rakeshbro said:
Yeah I saw some feedback on "23.5.A.0.575" build as well that some ppl didn't flashed bootloop fix and they got it boot.
But for me I'd to flash bootloop fix to get into os. I remember Last time when I was on MM build "23.5.A.0.570_R4D" I've like 350+ apps installed on my z2 and after a few weeks later Build "23.5.A.0.575" came out. And guess what I've flashed it without the bootloops fix and that's it, I got stucked on lockscreen and whenever I unlock my device it just reboot again & again, And I can't even boot to recovery. With a broken heart I've to flash LP rom again and root it and then flash the latest MM build. I just did't want to take that risk again this time, since I've now more than 360+ apps installed on my Z2. So It's upto All of u guys. U want to flash the old bootloop fix or not. Try and let us know Good Luck!
Click to expand...
Click to collapse
I think we have do the same, but i dont use the bootloop fix...
I will flash recroot v4 next time without bootloop fix and i tell you. Thank you!!

Thanks for your work
flashing without a probleme