This thread is a replacement for @Jamal_RS thread of Root 14.4.A.0.157 [ LB / UBL ] because there is no kernel file to download. So I uploaded kernel .108, kernel .157 and rootkit that I always use to root and it works.
Here the Download link
http://d-h.st/M9a
How?
1) Flash kernel .108 with Flashtool (Flashmode Mode)
2) Root with rootkitXperia_20140719 by double click on "instal.bat"
3) If root process has done, flash kernel .157 with Flashtool (Flashmode Mode)
4) Done
Another method:
1) If you're still on FW .108, root your phone but not deodex, and update OTA. If your rom already deodex, it will fail to verify.
2) If you're on FW .157, downgrade to .108 and follow step no.1
Done.
Please click THANKS Button if you like this
======================================================================
Credits :
@Waledac
@JAMAL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
Hi all
After flash kernel C690X_14.4.A.0.108_KernelOnly.ftf
My Z1 Compact (D5503) has a big problem. The LCD monitor is a black color (not active - but speaker, LED... still active))
I thinks this kernel is wrong with my Z1 Compact (D5503), It cannot detect the LCD panel.
vanne88 said:
Hi all
After flash kernel C690X_14.4.A.0.108_KernelOnly.ftf
My Z1 Compact (D5503) has a big problem. The LCD monitor is a black color (not active - but speaker, LED... still active))
I thinks this kernel is wrong with my Z1 Compact (D5503), It cannot detect the LCD panel.
Click to expand...
Click to collapse
To repair u must install firmware again :[
I have this problem too
If it says C69XX it's for Z1 not for Z1 Compact. OP please change it to D55XX kernel.
HooLIMAN87 said:
If it says C69XX it's for Z1 not for Z1 Compact. OP please change it to D55XX kernel.
Click to expand...
Click to collapse
Adri9102 said:
To repair u must install firmware again :[
I have this problem too
Click to expand...
Click to collapse
vanne88 said:
Hi all
After flash kernel C690X_14.4.A.0.108_KernelOnly.ftf
My Z1 Compact (D5503) has a big problem. The LCD monitor is a black color (not active - but speaker, LED... still active))
I thinks this kernel is wrong with my Z1 Compact (D5503), It cannot detect the LCD panel.
Click to expand...
Click to collapse
Hi dudes, please download and check files in the .zip. I have download my own .zip file here and check, here's the list:
1) D550X_14.4.A.0.108_KernelOnly.ftf
2) D550X_14.4.A.0.157_KernelOnly.ftf
3) rootkitXperia_20140719.zip
So I don't know which file that @vanne88 downloaded. It's not my fault or wrong upload.
SlikToxic said:
Hi dudes, please download and check files in the .zip. I have download my own .zip file here and check, here's the list:
1) D550X_14.4.A.0.108_KernelOnly.ftf
2) D550X_14.4.A.0.157_KernelOnly.ftf
3) rootkitXperia_20140719.zip
So I don't know which file that @vanne88 downloaded. It's not my fault or wrong upload.
Click to expand...
Click to collapse
Yea, is working
Adri9102 said:
Yea, is working
Click to expand...
Click to collapse
Does it work on lock bootloader
---------- Post added at 12:52 PM ---------- Previous post was at 12:48 PM ----------
SlikToxic said:
This thread is a replacement for @Jamal_RS thread of Root 14.4.A.0.157 [ LB / UBL ] because there is no kernel file to download. So I uploaded kernel .108, kernel .157 and rootkit that I always use to root and it works.
Here the Download link
http://d-h.st/M9a
How?
1) Flash kernel .108 with Flashtool (Flashmode Mode)
2) Root with rootkitXperia_20140719 by double click on "instal.bat"
3) If root process has done, flash kernel .157 with Flashtool (Flashmode Mode)
4) Done
Another method:
1) If you're still on FW .108, root your phone but not deodex, and update OTA. If your rom already deodex, it will fail to verify.
2) If you're on FW .157, downgrade to .108 and follow step no.1
Done.
Please click THANKS Button if you like this
======================================================================
Credits :
@Waledac
@JAMAL
[/IMG]
Click to expand...
Click to collapse
Does it work on lock bootloader
---------- Post added at 01:05 PM ---------- Previous post was at 12:52 PM ----------
vanne88 said:
Hi all
After flash kernel C690X_14.4.A.0.108_KernelOnly.ftf
My Z1 Compact (D5503) has a big problem. The LCD monitor is a black color (not active - but speaker, LED... still active))
I thinks this kernel is wrong with my Z1 Compact (D5503), It cannot detect the LCD panel.
Click to expand...
Click to collapse
The kernel u have flashed is for Z1 not for z1 compact plz download kernal for z1 compact
SlikToxic said:
This thread is a replacement for @Jamal_RS thread of Root 14.4.A.0.157 [ LB / UBL ] because there is no kernel file to download. So I uploaded kernel .108, kernel .157 and rootkit that I always use to root and it works.
Here the Download link
http://d-h.st/M9a
How?
1) Flash kernel .108 with Flashtool (Flashmode Mode)
2) Root with rootkitXperia_20140719 by double click on "instal.bat"
3) If root process has done, flash kernel .157 with Flashtool (Flashmode Mode)
4) Done
Another method:
1) If you're still on FW .108, root your phone but not deodex, and update OTA. If your rom already deodex, it will fail to verify.
2) If you're on FW .157, downgrade to .108 and follow step no.1
Done.
Please click THANKS Button if you like this
======================================================================
Credits :
@Waledac
@JAMAL
[/IMG]
Click to expand...
Click to collapse
Yeah its working. Awesome. THANKS
So, does it work on locked bootloader? Is a wipe needed? I really don't like to loose my settings and data unless I can't use titanium or things like that because of no root.
show2 said:
So, does it work on locked bootloader? Is a wipe needed? I really don't like to loose my settings and data unless I can't use titanium or things like that because of no root.
Click to expand...
Click to collapse
Works, no wipe involved
Sent from my D5503 using XDA Free mobile app
Problem with rootkernel!!!
Hello there!
One thing I don't understand, is when I click the download link in this post, it takes me to Devhost and download Root kernel .157.zip.
The question is, HOW do I deal with this file? once I double click it, it takes me to install some third party downloader and a mystartpage thingy. Where can I find the kernel?
I'd be glad if you can assist me with this, because Rooting my Z1 Compact is Hell of a complication and this is my fourth day trying to root it!! I am no noob since I have been rooting many android devices throughout the years, but this one is the most complicated one! I'd appreciate the help, thanks!!
Untick the Download with Dev-Host Download Manager box.
When I run Emma Flashtool it says the bootloader is locked so I cannot proceed.
Reading this thread I understood this procedure worked with locked bootloader - so I am confused now??
harryw66 said:
When I run Emma Flashtool it says the bootloader is locked so I cannot proceed.
Click to expand...
Click to collapse
Why are you using EMMA if you have a locked BL.
harryw66 said:
Reading this thread I understood this procedure worked with locked bootloader - so I am confused now??
Click to expand...
Click to collapse
It's from not reading properly that you've confused yourself, so read this - http://forum.xda-developers.com/showthread.php?t=2631291 to clear it up.
done it right and worked, but Play Store and other Google apps don't work well, play store says "server error" or "check your internet connetion"
tried to solve it by editing, deleting and disabling hosts file but didn't work
any help?
XperienceD said:
Why are you using EMMA if you have a locked BL.
It's from not reading properly that you've confused yourself, so read this - http://forum.xda-developers.com/showthread.php?t=2631291 to clear it up.
Click to expand...
Click to collapse
Thanks for the link. Been reading some of the newer threads - that one looks much more informative.
I am using Emma because I thought (reading this thread) that I could still use it with a locked BL albeit in Flashmode??
I am powered off, holding Volume Down key and then inserting the USB cable with volume down key still held.
The green led flashes for a brief second and then goes off and Emma says 'Lock phone detected'
I also tried Volume UP key as a test and the blue light stays on until I disconnect the cable, but Emma does not detect the phone.
I will read the above linked thread in detail.
Cheers!
saviola123 said:
done it right and worked, but Play Store and other Google apps don't work well, play store says "server error" or "check your internet connetion"
tried to solve it by editing, deleting and disabling hosts file but didn't work
any help?
Click to expand...
Click to collapse
UP!
saviola123 said:
UP!
Click to expand...
Click to collapse
Reflash and check what your doing.
XperienceD said:
Reflash and check what your doing.
Click to expand...
Click to collapse
thank you for replying, i reflashed it again and it worked
again, Thank you.
Thank you very much to reply the questions while I'm not here @XperienceD
I have tried this root method many times, on my locked bootloader device, I didn't have problems like others experienced it. So I share this here because I'm sure It's safe method.
Related
Hi Guys:
Finally, I found it the best way to root firmware .266
******** Just for unlocked bootloader **********
Click to expand...
Click to collapse
The best way to solve the problem of "lack of management Ram
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dedicated to all of you: Special Thanks to my good friend @RuchRha :fingers-crossed:
1 - .266 firmware Central Europe will flash via Flash Tools on the your XSP.
2 - Using the advanced stock kernel from doomlord (flash it via QuickIMG) and flash the root app in recovery "supersu" app on your phone .
3 - The stock kernel of firmware .266 Click this link to download and flash it via QuickIMG (Download it at Attachment) [ The QuickIMG best tool for flah any Kernel with any Format! ]
4 - Download CWM And TWRP For XSP .266 zip file from this link and follow the manual steps.
extract the folder in .zip file to desktop and run install.bat you will have to enable usb debugging and need root for it
Click to expand...
Click to collapse
********* CWM and TWRP for Xperia SP with Locked Bootloader (Compatible with .266 firmware ) **********
Click to expand...
Click to collapse
Requiments:
4.1.2
Root
CWM
Flashtool
Download: .266 kernel
Purestockdeodex v2
Step1: booting cwm and flash(factory reset, wipe cache, advenced/wipe dalvik) purestockdeodex v2
Step2: flash supersu
Step3: advenced/power off
Step4: using flashtool and flash. 266 kernel
Use the CWM and TWRP for Xperia SP with Locked Bootloader that is compatible with firmware .266
To Install it:
Click to expand...
Click to collapse
1.) down CWM_SP_LB_4.3.zip file.
2.) unzip it on your desktop.
3.) go to the CWM SP folder
4.) run the install.bat file
5.) select option number 1 to install.
6.) stay tuned on the phone as it calls super user permissions.
7.) Read the directions to see that everything went well.
8.) If all went well you press a key to continue and depues press 3 to finish
Special Thanks to my good friend @RuchRha for CWM And TWRP For XSP .266 and stock kernel of firmware .266
Thanks to @DooMLoRD for advanced stock kernel
Thanks to @dssmex for CWM&TWRP for locked bootloader
Thanks to @jancsessz for Rooting method .266 fw for locked bootloader
If this post was helpful to you, press the thanks button :fingers-crossed:
Unlocked bootloaders only I believe..
mrjraider said:
Unlocked bootloaders only I believe..
Click to expand...
Click to collapse
Yes, The best way to root .266 only for Unlocked bootloaders
what the hell!!!
just do this
http://forum.xda-developers.com/showthread.php?t=2646193
ps:
loghme ro dore saret mipichoni??
ya naghi
Of course its for unlocked bootloader only. But. When U have it unlocked I dont see any sense to use stock kernel after all
A reason to use stock kernel is that the advanced kernel from doomlord has very poor ram management. A lot of users complaining about that. Thanks for the tutorial.
Sent from my C5303 using Tapatalk
didar2 said:
what the hell!!!
just do this
http://forum.xda-developers.com/showthread.php?t=2646193
ps:
loghme ro dore saret mipichoni??
ya naghi
Click to expand...
Click to collapse
If I took the train up to an hour to write it, because this have:
The main reason for this approach is that the only way to fix the problem "Ram management" is the same way.
luccasvr said:
A reason to use stock kernel is that the advanced kernel from doomlord has very poor ram management. A lot of users complaining about that. Thanks for the tutorial.
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
Yes u got it! :good:, this is the main cause of this education.
You could also add in the thread if som1 is on .254 fimrware and rooted can take a backup of TA partition, then unlock bootloader and after following all steps restore TA and flash stock kernel, that's it locked bootloader with all DRM keys/TA partition present along with root and recovery's.
Edit : in 3rd step it's not needed to flash the stock kernel using fastboot, it can/should be flashed in flashmode.
I want this for LB!!!!
Enviado desde mi C5303 mediante Tapatalk
Sorry internet connection error
Amin.HVS said:
Hi Guys:
Finally, I found it the best way to root firmware .266
In this tutorial:
The best way to solve the problem of "lack of management Ram"
Dedicated to all of you: Special Thanks to my good friend @RuchRha :fingers-crossed:
1 - .266 firmware Central Europe will flash via Flash Tools on the your XSP.
2 - Using the advanced stock kernel from doomlord (flash it via fastboot) and flash the root app in recovery "supersu" app on your phone .
3 - The stock kernel of firmware .266 Click this link to download and flash on your phone via fastboot.
4 - Download CWM And TWRP For XSP .266 zip file from this link and follow the manual steps.
Special Thanks to my good friend @RuchRha for CWM And TWRP For XSP .266 and stock kernel of firmware .266 :fingers-crossed:
Thanks to DoomLord for advanced stock kernel
If this post was helpful to you, press the thanks button :fingers-crossed:
Click to expand...
Click to collapse
Step 3 should not be flashed in fastboot. or it will bricked your phone. use flash tool via flash mode since it is a tft file
You should modify the title of this topic and add [UB] cause it misleads people and make them believe that there is a working root for [LB]
update to. 266 while keeping root
Hi, I'm new to this, is there anyway to update to 4.3 without losing root? And if there isn't, is it possible to re-root on updated Xperia sp without unlocking the bootloader? Any help greatly appreciated...
monkeymind said:
Hi, I'm new to this, is there anyway to update to 4.3 without losing root? And if there isn't, is it possible to re-root on updated Xperia sp without unlocking the bootloader? Any help greatly appreciated...
Click to expand...
Click to collapse
Nope, you will surely lose root when you update but you still can gain root by following the OP. Works 100% though you will need to UNLOCK your BOOTLOADER to gain such permission. But you can relock later after installing SuperSU and its binaries if you 1st backup your TA partition
So instead of creating the obvious tutorials about how to root for UBL only it would be nice if you could find the way for LB.
Also this is more of a double thread since Doomlord has updated his CWM thread
RuchRha said:
You could also add in the thread if som1 is on .254 fimrware and rooted can take a backup of TA partition, then unlock bootloader and after following all steps restore TA and flash stock kernel, that's it locked bootloader with all DRM keys/TA partition present along with root and recovery's.
Edit : in 3rd step it's not needed to flash the stock kernel using fastboot, it can/should be flashed in flashmode.
Click to expand...
Click to collapse
Ok Bro!
Edit post #1 and best tool for flash kernel added. :good:
Verssetti said:
I want this for LB!!!!
Enviado desde mi C5303 mediante Tapatalk
Click to expand...
Click to collapse
Sorry! just for UB!
OP Updated!
QuickIMG tools is the best tool for flash any kernel added to post #1
Enjoy...
You put a [LB] tag in the title, and you say in the thread it is for unlocked bootloader only ...
update to 4.3 and root with locked bootloader
I'm new here! I can't unlock the bootloader. Am running rooted 4.1 on xperia sp. Could you put up a very simple step by step guide for doing the update and rooting. I've read through the thread and can't quite follow what to do. Have used flashtool for the original rooting process but apart from that am totally green I'm afraid...thanks in anticipation!
Elwino2.3 said:
When i try mount /system via cwm the log says "error mounting /system". How to fix this? Please help
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
Anyone?
Sent from my C5303 using Tapatalk
Is there any way to root the Samsung Galaxy S3 Neo i9301i with Android 4.4.2 KitKat on it?
Hope somebody can help me :fingers-crossed:
ViktorFoedowski said:
Is there any way to root the Samsung Galaxy S3 Neo i9301i with Android 4.4.2 KitKat on it?
Hope somebody can help me :fingers-crossed:
Click to expand...
Click to collapse
Still no answers?
I'd also like to root this device.
Maybe with towelroot?
+1 for supporting rooting s3 neo
Thx
Towelroot works brother
Sent from my GT-I9300I using Tapatalk
ViktorFoedowski said:
Is there any way to root the Samsung Galaxy S3 Neo i9301i with Android 4.4.2 KitKat on it?
Hope somebody can help me :fingers-crossed:
Click to expand...
Click to collapse
+1
---------- Post added at 10:21 AM ---------- Previous post was at 10:19 AM ----------
mianahmadpp said:
Towelroot works brother
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
no for me, popup advise that device not supported
---------- Post added at 10:25 AM ---------- Previous post was at 10:21 AM ----------
vroot no work, until now
Sent from my GT-I9301I
---------- Post added at 10:36 AM ---------- Previous post was at 10:25 AM ----------
framaroot no work
Sent from my GT-I9301I
---------- Post added at 10:46 AM ---------- Previous post was at 10:36 AM ----------
POOT no work
Sent from my GT-I9301I
rod555 said:
no for me, popup advise that device not supported
Click to expand...
Click to collapse
you propably updated to the new version of Kitkat 4.4.2.
The new update had the bandversion I9301IXXUANF4 for me (I updated too) (there is no possible way to root this version as far as i know)
But the not updated version of KitKat 4.4.2 (bandversion for me: I9301IXXUANC6) works with towelroot.
Beside i updated to the new update i still got my phone rooted:
I downloaded the new version of Odin on my pc.
I downloaded the old version from sammobile. (the I9301IXXUANC6 version)
In Odin (launched with admin rights) you click on the PDA (or sometimes AP called) button and select the downloaded firmware version (unpacked)
Next boot your phone in recovery mode (turn it off, then press volume down + home + power button)
Connect your phone to your pc (after that odin should recognize your phone)
Now make sure re-partition is NOT checked in odin !this is very important! and click start (now wait some time until its finished)
Your phone should reboot automatic (if auto reboot is checked in odin) and the old firmware should be on your phone
Now install towelroot and click "make it rain"
Now you should have root! :laugh:
(Hope this helps. Sorry for my bad english... :crying: )
Have you tried this tutorial?
How to root Samsung Galaxy S3 Neo GT-I9301I
Hopes help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cacing32 said:
Have you tried this tutorial?
How to root Samsung Galaxy S3 Neo GT-I9301I
Hopes help.
Click to expand...
Click to collapse
yes, but when I launch app advise that my device isn't supported
Sent from my GT-I9301I
ViktorFoedowski said:
you propably updated to the new version of Kitkat 4.4.2.
The new update had the bandversion I9301IXXUANF4 for me (I updated too) (there is no possible way to root this version as far as i know)
But the not updated version of KitKat 4.4.2 (bandversion for me: I9301IXXUANC6) works with towelroot.
Beside i updated to the new update i still got my phone rooted:
I downloaded the new version of Odin on my pc.
I downloaded the old version from sammobile. (the I9301IXXUANC6 version)
In Odin (launched with admin rights) you click on the PDA (or sometimes AP called) button and select the downloaded firmware version (unpacked)
Next boot your phone in recovery mode (turn it off, then press volume down + home + power button)
Connect your phone to your pc (after that odin should recognize your phone)
Now make sure re-partition is NOT checked in odin !this is very important! and click start (now wait some time until its finished)
Your phone should reboot automatic (if auto reboot is checked in odin) and the old firmware should be on your phone
Now install towelroot and click "make it rain"
Now you should have root! :laugh:
(Hope this helps. Sorry for my bad english... :crying: )
Click to expand...
Click to collapse
one billion of thanks! run perfectly [emoji106]
Sent from my GT-I9301I
rod555 said:
one bullion of thanks! run perfectly
Click to expand...
Click to collapse
No problem. I just wanted to help.
Sent from my GT-I9301I using XDA Premium 4 mobile app
Well, I hope that there will be a root app for I9301IXXUANF4 soon.
I've got some bad memories of doing anything to my phone with ODIN. App is the only non-destructive way for me.
Does anyone know how much time developer needs to release his updated app after new version of Android?
in download mode do you have trace of knox?
i can't understand if it's only a software knox or a hardware one (efuse) like on the s4
you can enter in download mode by doing:
The phone must be turned off.
Keep pressing and holding ‘Home Button (middle button) + Volume down key + Power Button’ simultaneously until you see a warning message. Now press Volume Up to continue. This will land you into downloading mode.
Click to expand...
Click to collapse
If you read "knox warranty etc..." there is a hardware-efuse knox
Help
Hello the root worked. but I can not runterladen..kann the SU file a reinstellen here bitte..soory I can not speak English and write here about the google translator
ViktorFoedowski said:
you propably updated to the new version of Kitkat 4.4.2.
....
Beside i updated to the new update i still got my phone rooted:
....
(Hope this helps. Sorry for my bad english... :crying: )
Click to expand...
Click to collapse
Do you mean that you can downgrade, then root and then again apply the update installing the "F4" version of firmware?
Thanks
Proteusso said:
Do you mean that you can downgrade, then root and then again apply the update installing the "F4" version of firmware?
Thanks
Click to expand...
Click to collapse
No I just wanted to say that I updated my phone to the "F4" version. And after I found that the updated version cannot be rooted I downgraded the phone and rooted it. I am still on the old "C6" version.
Sent from my GT-I9301I using XDA Premium 4 mobile app
Give it a try
ViktorFoedowski said:
No I just wanted to say that I updated my phone to the "F4" version. And after I found that the updated version cannot be rooted I downgraded the phone and rooted it. I am still on the old "C6" version.
Sent from my GT-I9301I using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello,
i think we give it a try. Will there be root when you update again?
Harzer30 said:
Hello,
i think we give it a try. Will there be root when you update again?
Click to expand...
Click to collapse
The same question here... Then can I upgrade to ANF4 again with root saved?
BaRTaSs88 said:
Can I upgrade to ANF4 again with root saved?
Click to expand...
Click to collapse
I don't think so but I'm not sure. I didn't try updating with root.
Sent from my GT-I9301I using XDA Premium 4 mobile app
BaRTaSs88 said:
The same question here... Then can I upgrade to ANF4 again with root saved?
Click to expand...
Click to collapse
no, if you upgrade root it's not saved. Until AND3 firmware yes
Sent from my GT-I9301I
Only C6 can be rooted, and as far as I can see there are not that changes with ANF4 and the newer!
So if you really need follow the steps of some posts before!
This is to announce that @Chainfire has kindly provided his CF-Auto-Root to support various Galaxy Note Edge SM-N915* devices !!
I DO NOT SUPPORT THIS THREAD ANY LONGER, SO PLEASE FLASH AT YOUR OWN RISK AND DO NOT PM FOR HELP or Q&A
Click to expand...
Click to collapse
THIS THREAD IS JUST A REFERENCE & LINK TO CHAINFIRE'S WORK, NOTHING ELSE
THIS WILL VOID WARRANTY & SET KNOX COUNTER 0x1. THERE IS NO KNOWN METHOD TO ROOT WITHOUT TRIPPING KNOX !!
Repository of supported devices:
http://autoroot.chainfire.eu/
If your device is NOT SUPPORTED:
1. Download your deice firmware from sammobile.com or samsung-updates.com
2. Extract recovery.img
3. Post your recovery.img in Chainfire OFFICIAL CF-AUTO-ROOT THREAD !! and ask him nicely to look into it
If your device has issues with CF-Auto Root method:
* If your device has a LOCKED BOOTLOADER, then you're out of luck. There is no known method to unlock.
* Post in Chainfire OFFICIAL CF-AUTO-ROOT THREAD !!
Official XDA CF-Auto-Root Thread:
PLEASE POST ALL QUERIES RELATED TO CF-AUTO ROOT TO THE BELOW OFFICIAL CF-AUTO-ROOT THREAD !!
http://forum.xda-developers.com/showthread.php?t=1980683
I have only personally tested SM-N915S model and confirm root working. I can not vouch for any other device models. Just make sure you have your full firmware package available to recover from a soft brick and read the thread before attempting to flash !!
Method used for my SM-N915S:
1. Advised: Have a full stock firmware package available (just in case of soft brick) [sammobile.com or samsung-updates.com]
2. Have Samsung USB drivers installed on Windows PC (Easiest way is DL KIES from Samsung)
3. DISABLE REACTIVATION LOCK: device settings > security > reactivation lock >> DISABLE (uncheck)
4. Flash via Odin [I used Odin3 v3.07 - attachment] as per Chainfire's instructions !
** If unsure how to use Odin, there are many guides found by searching !
5. Wait around 30 secs after flash (stuck on boot screen), and hopefully device will boot.
6. Open SuperSU app and update SU if prompted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sweet! So will this root the Sprint Note Edge successfully?
powerstroke said:
Sweet! So will this root the Sprint Note Edge successfully?
Click to expand...
Click to collapse
I will let you know in a few minutes.
Next1776 said:
I will let you know in a few minutes.
Click to expand...
Click to collapse
Ok, good luck and thank you. By the way, which Firmware are you on?
What? What ?
I noticed att edge listed on 1st post. I can root att edge? Anyone able to confirm?
Sorry, 915t. I thought t stands for att. It' for tmobile.
Root on Sprint SM915P.... CHECK !
Okay, my Sprint SM915P phone is successfully rooted. It went down pretty much how it did in this thread : http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
I didn't install the SD card fix yet...have to check that out first.
I got the "FAIL" messsage after flashing the CF autoroot tar file, then I thought WTH, I'll see if the Tmobile variant process works, so I tried it, and it worked. I have rebooted several times and it seems ROOT is sticking. Recovery had a hard time finding the UPdate SU file for some reason, but I eventually did, and flashed it.
So, my recommendation is to flash the Chainfire Autoroot tar file for the Sprint variant first, then follow the thread I referenced above for the rest. Your results may be different, so buyer beware! Good luck.
Many Thanks to Chainfire and TEKHD , you guys rock!
powerstroke said:
Ok, good luck and thank you. By the way, which Firmware are you on?
Click to expand...
Click to collapse
NK1 Firmware
Next1776 said:
Okay, my Sprint SM915P phone is successfully rooted. It went down pretty much how it did in this thread : http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
I didn't install the SD card fix yet...have to check that out first.
I got the "FAIL" messsage after flashing the CF autoroot tar file, then I thought WTH, I'll see if the Tmobile variant process works, so I tried it, and it worked. I have rebooted several times and it seems ROOT is sticking. Recovery had a hard time finding the UPdate SU file for some reason, but I eventually did, and flashed it.
So, my recommendation is to flash the Chainfire Autoroot tar file for the Sprint variant first, then follow the thread I referenced above for the rest. Your results may be different, so buyer beware! Good luck.
Many Thanks to Chainfire and TEKHD , you guys rock!
Click to expand...
Click to collapse
Awesome thank you. I will give it a shot after work tonight. I am on the NK1 firmware as well.
Any users of the various device variants please inform others what's working and what's not with the official CF-Auto-Root method.
Freeeeedom! (on Sprint)
Does this also mean no more autoupdates? {knox tripped}
blackinjun said:
Does this also mean no more autoupdates? {knox tripped}
Click to expand...
Click to collapse
No be deal.
I always disable/remove update and use Odin to flash any stock ROM from sammobile.com or samsung-updates.com .
UpInTheAir said:
This is to announce that @Chainfire has kindly provided his CF-Auto-Root to support various Galaxy Note Edge SM-N915x devices !!
Current models supported:
SM-N915F
SM-N915G
SM-N915P (USA - Sprint)
SM-N915S (Korea - SKT)
SM-N915T (USA T-Mobile)
Download Here: >> CF-Auto-Root Repository
>> Official XDA CF-Auto-Root Thread <<
I have attached Odin3 v3.07 at the end of this post
Would recommend to donate to the CHAMPION of Root, or purchase SuperSU Pro or any other one of his wonderful apps
Root personally confirmed working for Samsung Galaxy Note Edge Exynos Korea SM-N915 "S" via the legend Chainfire CF-Auto-Root
WARNING : KNOX COUNTER WILL BE TRIPPED AND WARRANTY VOID - THERE IS NO CURRENTLY KNOWN METHOD TO RESET THE COUNTER OR ROOT WITHOUT TRIPPING KNOX !!
There is no need to elaborate too much on install instructions, they are found in his thread, website and all over the web
Method:
1. Advised: Have a full stock firmware package available (just in case) [sammobile.com or samsung-updates.com]
2. Have Samsung USB drivers installed on Windows PC (Easiest way is DL KIES from Samsung)
3. Flash via Odin [I used Odin3 v3.07 - attachment] in PDA, as per Chainfire's instructions !
** If unsure how to use Odin, there are many guides found by searching !
4. Wait around 30 secs after flash (stuck on boot screen), and hopefully device will boot.
5. Open SuperSU app and update SU if prompted
.
Click to expand...
Click to collapse
Can N9150 use this?
Sent from my GT-I9505 using XDA Free mobile app
vongkachon said:
Can N9150 use this?
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
As your device isn't yet listed in Chainfire's thread, I have no idea if any of the official CF-Auto-Root would be compatible. If you were to risk your device, you would look for a Snap Dragon one, but I would not recommend to those who can't afford the risk. EDIT: Without having the official stock firmware package available, I WOULD NOT TRY IT.
If your device isn't yet supported, maybe see if your firmware package is available at sammobile.com or samsung-updates.com , download and extract the recovery.img . Then upload the recovery.img to Chainfire's main XDA thread (link in OP) and ask nicely if he can spend the time to support your device I there is nothing, maybe contact one of those sites and politely request
mmm, tried it on the N915G with the appropriate files being (CF-Auto-Root-tblte-tbltedt-smn915g) but no luck on rooting so far. Initially I thought it could be me being silly with drivers and ODIN versions, tried a few drivers and ODIN versions but same outcome. Was stuck at NAND: write failure after what appears to be an attempt to write in recovery, then cache, even after a few tries [being full disconnect,restart in download mode and re-flash]. No issues restoring to store firmware (N915GXXU1ANJ3_N915GXSA1ANJ3_N915GXXU1ANJ3_HOME.tar.md5) though.
Any tips guys?
leekslk said:
mmm, tried it on the N915G with the appropriate files being (CF-Auto-Root-tblte-tbltedt-smn915g) but no luck on rooting so far. Initially I thought it could be me being silly with drivers and ODIN versions, tried a few drivers and ODIN versions but same outcome. Was stuck at NAND: write failure after what appears to be an attempt to write in recovery, then cache, even after a few tries [being full disconnect,restart in download mode and re-flash]. No issues restoring to store firmware (N915GXXU1ANJ3_N915GXSA1ANJ3_N915GXXU1ANJ3_HOME.tar.md5) though.
Any tips guys?
Click to expand...
Click to collapse
You might want to drop a post in Chainfire main XDA thread to let him know it's not working. He seems really busy, so that's of he monitors that thread anymore.
Nothing official, there might be something unofficial using Note 4 method. There is always risk to remember though.
Probably dumb question: will this also reset the device?
wilbur4321 said:
Probably dumb question: will this also reset the device?
Click to expand...
Click to collapse
If you mean "factory" reset, no it won't. Knox counter is covered in OP.
UpInTheAir said:
If you mean "factory" reset, no it won't. Knox counter is covered in OP.
Click to expand...
Click to collapse
Thanks. Not too worried about Knox. Hopefully that won't change after tmobile gets my note3 with Knox tripped back, though.
Does anyone have an extracted version of the SM-N915S rom? I was looking for few apks from that one. I installed some files from the TMO version on to my phone and it has messed up certain functions.
Thanks in advance!
H3G M7 Guru Reset Rom + File Collection
HTML:
In this thread I will be sharing my collection of file's for the HTC One M7 on H3G. All these files will be useful for returning to stock especially those with s-on. I hope someone finds them useful anyway [emoji14] All files in this thread are suitable for devices with the following CiD and MiD
Code:
modelid: PN0710000
cidnum: H3G__001
cidnum: H3G__106
cidnum: H3G__402
cidnum: H3G__G04
Guru Reset Rom Stock KitKat 6.14.771.2Guru_Reset_M7_H3G_6.14.771.2.zip MD5 :- 676e56aa7e5e725387b65dd14e322fba
Includes optional Stock Recovery, Stock Radio and Root.
Install with TWRP recovery like any other rom. (TWRP 2.6.3.3 Recommended)
OTA updates when available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to @crushalot www.htc1guru.com for the original aroma guru reset package.
Stock Nandroid BackupsKitKat 4.4.3 6.14.771.2 TWRP Nandroid MD5 :- 72c8152a8179fbd4cb2d2e5b8b35b905
Full Stock for OTA's
KitKat 4.4.2 5.12.771.3 TWRP Nandroid
Full Stock for OTA's
JellyBean 4.3 3.62.771.3 TWRP Nandroid
Pre-Rooted and missing Preload Data, Not suitable for taking OTA's
Firmware Zips 2.24.771.3.zip MD5:- a56305ea6570ee4ff656a4357171ce11
3.62.771.3.zip MD5:- ba684b5207d74e24075cd4b02ead3ba1
4.20.771.17.zip MD5:- d4fba9da51321b95741440b647bc9bee
5.12.771.3.zip MD5:- 64f0d0a23fb5468d669bb2f922043d9c
6.14.771.2.zip MD5:- 0dd432cbf3ddddcdd74ee669b44ee376
7.19.771.1.zip MD5:- 0ec86aefeadf7e3c0e37fafaa1192777
OTA Update ZipOTA_M7_UL_JB_50_SENSE5_H3G_UK_2.24.771.3-1.28.771.6_release_328027_signedlnazfd1l6874pvs8.zip MD5:- d1eecfce64c7847a2ee35a9e9be8ca95
OTA_M7_UL_JB43_SENSE55_MR_H3G_UK_3.62.771.2-2.24.771.3_release_338684cjuf0j4gm1ogoo4n.zip MD5:- c7798f585b4ff326a3b8bad083ba05ed
OTA_M7_UL_K44_SENSE55_MR_H3G_UK_4.20.771.17-3.62.771.3_release_3536491kghgv33dtz4m18n.zip MD5:- 583dae463ffdf61b337f7946ed9db01a
OTA_M7_UL_K44_SENSE60_MR_H3G_UK_5.12.771.3-4.20.771.17_release_37214948ro8l36c6yo7dhi.zip MD5:- 44a3956d277141886af7ebc60a072766
OTA_M7_UL_K443_SENSE60_MR_H3G_UK_6.14.771.2-5.12.771.3_release_387423qg91a2pgfo5cx9ic.zip MD5:- 3dca820e82014f04afba66b41735bba4
OTA_M7_UL_L50_SENSE60_MR_H3G_UK_7.19.771.1-6.14.771.2_release_420807iloxunzwjif4idfm.zip MD5:- 3dca820e82014f04afba66b41735bba4
What is H3G?
Which one should i have to use?
i'm on firmware 6.09.401.11, HTC__001 and S-ON.
Black_Eyes said:
What is H3G?
Which one should i have to use?
i'm on firmware 6.09.401.11, HTC__001 and S-ON.
Click to expand...
Click to collapse
H3G is the mobile carrier Three these files are no good to you. I believe you requested a nandroid backup for your device in the collection thread. Take a look I posted a link there for you
http://forum.xda-developers.com/showthread.php?p=58690924
Danny201281 said:
H3G is the mobile carrier Three these files are no good to you. I believe you requested a nandroid backup for your device in the collection thread. Take a look I posted a link there for you
http://forum.xda-developers.com/showthread.php?p=58690924
Click to expand...
Click to collapse
Thanks Again
They all look extremely tempting and I actually understand which each file is, well almost hehe. Which would you recommend downloading in order to start from scratch on the HTC One M7 to be able to download OTA's? Or would it be quicker to just flash stock recovery?
Sacrimony said:
They all look extremely tempting and I actually understand which each file is, well almost hehe. Which would you recommend downloading in order to start from scratch on the HTC One M7 to be able to download OTA's? Or would it be quicker to just flash stock recovery?
Click to expand...
Click to collapse
It depends on your current situation. If you have the Stock Rom complete with Preload data. Then flashing the Stock Recovery should do the trick just fine with little hassle.
If you have a Custom Rom or have at some point unlocked the bootloader with your Stock Rom then the Guru Reset would be your best option. As Unlocking the bootloader wipes the Stock preload data which will cause the OTA to fail.
Danny201281 said:
It depends on your current situation. If you have the Stock Rom complete with Preload data. Then flashing the Stock Recovery should do the trick just fine with little hassle.
If you have a Custom Rom or have at some point unlocked the bootloader with your Stock Rom then the Guru Reset would be your best option. As Unlocking the bootloader wipes the Stock preload data which will cause the OTA to fail.
Click to expand...
Click to collapse
Ah I see, well I think I fall under the latter category. So is it just a case of downloading the guru .zip and then booting into TWRP and then flashing the .zip through there? ?
Sent from my HTC One using XDA Free mobile app
Sacrimony said:
Ah I see, well I think I fall under the latter category. So is it just a case of downloading the guru .zip and then booting into TWRP and then flashing the .zip through there? ?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Yes the gurureset flashes in recovery. It uses the Aroma installer and can flash the Stock Recovery for you this is an option during the installer setup :good:
Danny201281 said:
Yes the gurureset flashes in recovery. It uses the Aroma installer and can flash the Stock Recovery for you this is an option during the installer setup :good:
Click to expand...
Click to collapse
Ah that is fantastic! So everything I need is included in the guru zip? Man, one again you've been amazing. Thank you so much!
Sent from my HTC One using XDA Free mobile app
Just a quick update on the guru zip. Everything has worked perfectly, up and running as new. Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked. Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Sent from my HTC One using XDA Free mobile app[/QUOTE]
Sacrimony said:
Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked.
Click to expand...
Click to collapse
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Click to expand...
Click to collapse
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Sacrimony said:
Just a quick update on the guru zip. Everything has worked perfectly, up and running as new. Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked. Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
alray said:
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Click to expand...
Click to collapse
Yep what @alray said ,
Just for clarity, with the stock recovery if your getting a black screen followed by a picture of a phone with a red exclamation mark then that's normal. That is the stock recovery. To reveal the recovery menu hold volume up and press the power button. You will see some errors about unable to mount sdcard this is also normal. The recovery is looking for an sd card slot which the M7 doesn't have. We only have the internal storage :good:
Danny201281 said:
Yep what @alray said ,
Just for clarity, with the stock recovery if your getting a black screen followed by a picture of a phone with a red exclamation mark then that's normal. That is the stock recovery. To reveal the recovery menu hold volume up and press the power button. You will see some errors about unable to mount sdcard this is also normal. The recovery is looking for an sd card slot which the M7 doesn't have. We only have the internal storage :good:
Click to expand...
Click to collapse
alray said:
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Click to expand...
Click to collapse
Ah I understand now. That is really helpful, thanks both of you for clearing that up. I've read on a couple of sites that you may need to re-lock the bootloader and to get rid of the "Tampered" sign if you're to receive OTA updates, do you guys know if that's the case?
Sacrimony said:
Ah I understand now. That is really helpful, thanks both of you for clearing that up. I've read on a couple of sites that you may need to re-lock the bootloader and to get rid of the "Tampered" sign if you're to receive OTA updates, do you guys know if that's the case?
Click to expand...
Click to collapse
The guru reset is everything you need to be ready for the OTA. :good: Unlocked bootloader is fine as long as the software is stock :good:
Danny201281 said:
The guru reset is everything you need to be ready for the OTA. :good: Unlocked bootloader is fine as long as the software is stock :good:
Click to expand...
Click to collapse
Ok, that's awesome. Many thanks once again for your help and for your patience with my annoying questions!
Sacrimony said:
Ok, that's awesome. Many thanks once again for your help and for your patience with my annoying questions!
Click to expand...
Click to collapse
Your welcome :good: it's better to get it right first time, than to try and fix it after it's gone wrong
It gets stuck at 10%.
GeoVali99 said:
It gets stuck at 10%.
Click to expand...
Click to collapse
Which recovery are you using?
TWRP 2.8
But it's irrelevant now. After a couple of system formattings it did install.
GeoVali99 said:
TWRP 2.8
But it's irrelevant now. After a couple of system formattings it did install.
Click to expand...
Click to collapse
Ok cool, for the record though installs getting stuck happens a lot with TWRP 2.8.X.X :good:
That's why I recommend 2.6.3.3 but glad you got sorted though. If youhavent checked recently h3g are pushing the update now
[Official Lollipop 5.1.1] P600 DOJ3 (Mega & Android File Host) Fast Link + Easy Root
Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) from region PHE!
Firmware Version Info
(PDA: P600XXUDOJ3 CSC: P600OXADOJ3 CHANGELIST: 6086244 BUILD DATE: 23.10.2015)
It's not rooted and is untoched. It's completely stock!!!
I know others have made posts but they all use ****ty servers. I have uploaded this to Mega and Android File Host as they are both faster and more stable then pony Samsung's crappy servers.
When you flash rom with the setup as in picture it will flash over your previous rom and keep all data and apps and settings.
For maximum stability i recommend after first boot you do factory reset.
SM-P600 Note 10.1 Stock 5.1.1 Rom - Mega: https://mega.nz/#!2x5nmQob
Decription Key : !FU4t1X41UjV9kGmGkw8f-ZxomeyD13nbhL4FqV82AiI
Odin 3.07- Mega : https://mega.nz/#!CsJBQLhR
Decription key : !aSakzROgYonQ-MuKH3vJ_veSxCPcZWElBfZJ6At9Q-4
SM-P600 Note 10.1 Stock 5.1.1 Rom - Android File Host : https://www.androidfilehost.com/?fid=24269982086987868
md5 - 4435246f2bf0620c7acc5406bf189e3a
Odin 3.07 - Android File Host : https://www.androidfilehost.com/?fid=24269982086987869
Rooting guide for 5.1.1 : http://forum.xda-developers.com/showthread.php?p=63637426
TWRP Link : https://dl.twrp.me/lt03wifiue/
[BETA][2015.10.10] SuperSU v2.52 - https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
Wanam Xposed Framework & App - http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
All credit goes to the People running the posts I linked. I didn't do anything but bring it together in one post to save you time running around cyberworld
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/showthread.php?p=63637426
Download only the P600 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
Extra Features :
Note 5 Feature "Screen Off App" - http://forum.xda-developers.com/showthread.php?p=62731428
I don't know if this info is important to anyone but if someone wants it then here it is :
This info is from "About Device"
Model number
SM-P600
Android version
5.1.1
Kernel version
3.4.39-6086244
[email protected] #1
Fri Oct 23 17:24:00 KST 2015
Build number
LMY47X.P600XXUDOJ3
SE for Android status
Enforcing
SEPF_SM-P600_5.1.1_0039
Fri Oct 23 18:04:15 2015
KNOX version
KNOX 2.4.1
Standard SDK 5.4.1
Premium SDK 2.4.1
Customization SDK 2.4.0
Container 2.4.1
CEP 2.0.1
OTP 1.1.1
SE for Android 2.3.0
SSO 2.4.1
TIMA 3.0
VPN 2.2.0
Zionator said:
Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) from region PHE!
Firmware Version Info
(PDA: P600XXUDOJ3 CSC: P600OXADOJ3 CHANGELIST: 6086244 BUILD DATE: 23.10.2015)
It's not rooted and is untoched. It's completely stock!!!
I know others have made posts but they all use ****ty servers. I have uploaded this to Mega and Android File Host as they are both faster and more stable then pony Samsung's crappy servers.
When you flash rom with the setup as in picture it will flash over your previous rom and keep all data and apps and settings.
For maximum stability i recommend after first boot you do factory reset.
SM-P600 Note 10.1 Stock 5.1.1 Rom - Mega: https://mega.nz/#!2x5nmQob
Decription Key : !FU4t1X41UjV9kGmGkw8f-ZxomeyD13nbhL4FqV82AiI
Odin 3.07- Mega : https://mega.nz/#!CsJBQLhR
Decription key : !aSakzROgYonQ-MuKH3vJ_veSxCPcZWElBfZJ6At9Q-4
SM-P600 Note 10.1 Stock 5.1.1 Rom - Android File Host : https://www.androidfilehost.com/?fid=24269982086987868
md5 - 4435246f2bf0620c7acc5406bf189e3a
Odin 3.07- Android File Host : https://www.androidfilehost.com/?fid=24269982086987869
If you want root then there is a post here offering that ROOT : http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218
Click to expand...
Click to collapse
Thank you. And did you root it successfully? I cannot flash a twrp.
What about region
Whats the difference if my region is not this and i update?
Thank you for links. I wonder what if I install it over 4.3 instead of 4.4.2. Is there any difference?
iopxiang said:
Thank you. And did you root it successfully? I cannot flash a twrp.
Click to expand...
Click to collapse
Not yet I will wait a few days to do anything as I just want to see how it works and the battery life on stock. Then I will root and remove many system bloatware apps and see the difference.
rbaleiro said:
Whats the difference if my region is not this and i update?
Click to expand...
Click to collapse
This is the Spanish region but I live in UK and at the very first setup screen I chose UK language so it don't really matter about the region as there is no modem. This device is just WiFi so region makes no difference.
chengineer said:
Thank you for links. I wonder what if I install it over 4.3 instead of 4.4.2. Is there any difference?
Click to expand...
Click to collapse
You are welcome. Well I flashed this over a custom rom Hyperdrive 4.4.2 and then once it booted I then factory reset it. Before I factory reset the device it was fine I just like the fresness of roms.
So the answer to your question is I don't know but I don't think it will make a difference as the bootloader is in the rom and will be flashed automatically with the rom. I came from 4.4.2 so I cannot speak about 4.3 but I assume it will be the same result.
Sent from my SM-N920C using Tapatalk
Thanks, Ill install too and see what happens!
Just installed! It's running very smoothly. I just realised that they don't have the internal game lollipop when u push the version of the OS. Lol!
rbaleiro said:
Thanks, Ill install too and see what happens!
Click to expand...
Click to collapse
You're welcome.
rbaleiro said:
Just installed! It's running very smoothly. I just realised that they don't have the internal game lollipop when u push the version of the OS. Lol!
Click to expand...
Click to collapse
Yes I have been waiting for this lollipop for ages now. Just hope someone cooks up a lovely custom rom soon ?
Sent from my SM-N920C using Tapatalk
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
vinayburman said:
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
Click to expand...
Click to collapse
Touch (as well as all other functions) works in twrp 2.8.6
Sent from my SM-P600 using XDA Free mobile app
I can't thank you enough. I flashed 5.1.1 yesterday and everything was working fine, but I was really missing root. I could NOT wrap my head around the root process as described in the other posts. Nothing against all their hard work, I'm just slow. Your step by step was so easy to follow! Now I'm rooted and happy. Thanks!!
Guys, a question.
If i want to clean install Lollipop with full wipes using Odin on the SM-P601, which is currently on the UAE csc, using the INU csc, what are the steps i should follow.?
And if i factory reset using the recovery, will all my files in the internal storage get deleted.?
Any help would be appreciated.
Thanks. ☺
Will it work i have 5.0.1 one on my phone
countryboy1000000 said:
Will it work i have 5.0.1 one on my phone
Click to expand...
Click to collapse
Yes, it should, even you have custom rom.
---------- Post added at 06:02 PM ---------- Previous post was at 05:59 PM ----------
amey2606 said:
Guys, a question.
If i want to clean install Lollipop with full wipes using Odin on the SM-P601, which is currently on the UAE csc, using the INU csc, what are the steps i should follow.?
And if i factory reset using the recovery, will all my files in the internal storage get deleted.?
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Yes, factory reset is like you just brought the tablet from the store.
vinayburman said:
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
Click to expand...
Click to collapse
You are welcome. I am glad you got it rooted. First thing I did was debloating like a mad man hehe.
Then exposed and now I am gonna try and find working themes for it ?
Sent from my SM-N666F "Special Edition"
Any idea if the root will work on P605 too? It's got 5.1.1 as well and I'm pretty excited to get on it. However, not may people are discussing about it.
Thanks for the guide btw!
MasK said:
Any idea if the root will work on P605 too? It's got 5.1.1 as well and I'm pretty excited to get on it. However, not may people are discussing about it.
Thanks for the guide btw!
Click to expand...
Click to collapse
Yes it will work if u download the 605 rom and then from root post download the modded boot image for 605 if available and last thing get TWRP for 605 as well.
Do as described in my guide and apart from what I said above the rest is universal meaning that supersu and closed are the same for all versions.
Sent from my SM-P600 using Tapatalk
for sm-p601
Can you please give a link for sm-p601 too
Zionator said:
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
Click to expand...
Click to collapse
as I held these three buttons, I watched as the Samsung note splash screen flickered and restarted over and over. I held for about 10 minute and gave up after my hands got tired. After that, I couldn't get past the splash screen and had to do a straight ROM via ODIN.....can I still root? What was I doing wrong??