Related
Standard disclaimer applies for below mods, do it at your own risk. Always backup before you modify anything.
Deodex + Root:
Read the instructions carefully! Can only be flashed through CWM recovery
First, make sure you have CWM recovery installed. Then follow this steps carefully:
1.Download the file below and place it in the root of the SD card
2.Boot into recovery mode (CWM)
3.Wipe cache and dalvik cache (CWM)
4.Mount system before installation.
5.Navigate with the volume button, then choose install zip from sdcard
6.Choose zip from sdcard
7.Select the zip file you've downloaded and click yes
8.Wait till the installation complete then reboot your phone.
Note: First boot may take little longer than normal boot, hence please wait.
Download:
OS 2.3.4 S5830DDKQ6_Deodex_full @ 4shared.com (73 MB)
Overscroll Glow + Battery Mod + CRT Animation:
Note: If you have SAMSUNG (stock) bootanimation, then please use any custom boot animations before you install below mods. (Have look @ my signature for boot animations). Because this mod will erase SAMSUNG boot animation.
If you are using CF-ROOT, then you don't need to worry as CF-root already has custom boot animation.
1. Download attached file and unzip it
2. Use root explorer or similar app to move downloaded files to system/framework
3. Set permissions for both files appropriately to rw-r--r-- (644)
4. Reboot
Note: Boot may take little longer, don't panic just sit and relax.
Enable CRT Animation:
After completing above process, please follow these steps to enable CRT animation.
1. Long press build.prop from /system folder and open in text editor.
2. Modify this line
'debug.sf.hw=1' by adding # in front of debug, now it should look like mentioned below
'#debug.sf.hw=1'
3. Save and exit by pressing right soft key (this will backup your original build prop as build.prop.bak)
4. Reboot device
5. After reboot go to settings -> display -> animations and choose some or all animations.
Backlight Notification patch:
What is BackLightNotification?
The BackLightNotification mod converts the touchkey backlights into a notification led for sms, touchwiz email, gmail, gtalk and any other app which supports BLN.
For Calendar: Download "Calendar notifier" app from market
For Calls: Download "BLN control - Pro" app from market
1. Download attached file (Flash DDKQ6-services.zip)
2. Clear cache and dalvik cache
3. Flash through CWM
4. Reboot
Enjoy...!!!
Thanks to dhiru 1602 for overscroll glow source
Thanks to seilent for the overscroll glow tutorial
Thanks to ketut and neldar for the BLN
i have rooted DDKQ6 with root , cf-root kernel, and A2SD.. wil i loose my data after applying this
Do I need to flash DDKQ6 first before this?
denclaud said:
Do I need to flash DDKQ6 first before this?
Click to expand...
Click to collapse
Why do you ask this? Goodness.
imranaryan said:
i have rooted DDKQ6 with root , cf-root kernel, and A2SD.. wil i loose my data after applying this
Click to expand...
Click to collapse
Basically this will change your system apps and framework from odex to deodex, so its better to take backup first.
Sent from my GT-S5830 using XDA App
denclaud said:
Do I need to flash DDKQ6 first before this?
Click to expand...
Click to collapse
What kind of question is this? My goodness!
kickerz14 said:
What kind of question is this? My goodness!
Click to expand...
Click to collapse
guyz guyz..!!
politeness..
you were'nt rude but that could make people feel ashamed of their self..
there is much of a unallocated space about even the general things in people..
and here by asking this and getting such replies they might have felt something but there is still unallocated space..i mean that particular question is still unanswered..!!
denclaud said:
Do I need to flash DDKQ6 first before this?
Click to expand...
Click to collapse
Yes bro.. you need to flash DDKQ6 ROM to install this.. please search in this forum to understand what odex and deodex means... When we entered this forum we all were noob.. so don't worry...
Sent from my GT-S5830 using XDA App
well about this deodex its not working for me...
when i was on ddkq6 last week i flashed this update.. cleared dalvik and cache before...
installation do not show any difference but as i see there are no changes in system/app..
i believe .odex files should get removed or i have to remove them manually or flash is not working only ?
madman_amit said:
well about this deodex its not working for me...
when i was on ddkq6 last week i flashed this update.. cleared dalvik and cache before...
installation do not show any difference but as i see there are no changes in system/app..
i believe .odex files should get removed or i have to remove them manually or flash is not working only ?
Click to expand...
Click to collapse
Did you mount your system before flashing this update? If you don't, then it will not work.
CRT animation, 5% Battery Mod and overscroll glow for DDKQ6 has been added to first post..
dude thanks for this. but that linked crt and boot animation tutorial will give you a bootloop on a kq5 and kq6.
Lijop said:
dude thanks for this. but that linked crt and boot animation tutorial will give you a bootloop on a kq5 and kq6.
Click to expand...
Click to collapse
Is it? I haven't tried that personally. Let me look around for some other thread for BA, If not I'll write one.. Moreover for CRT animation you just need to add # in build.prop
sent from my Samsung Galaxy Ace with CyanogenMod 7.1
My phone is showing following things when i typed *#1234#
PDA:S5830DDQ6
PHONE:S5830DDQ6
CSC:S5830DDQ5
from this can I say my phone is DDQ6 and can i follow this tutorial
shriramc4 said:
My phone is showing following things when i typed *#1234#
PDA:S5830DDQ6
PHONE:S5830DDQ6
CSC:S5830DDQ5
from this can I say my phone is DDQ6 and can i follow this tutorial
Click to expand...
Click to collapse
Yes, Currently you are using DDKQ6 FW and you can follow this tutorial
sent from my Samsung Galaxy Ace with CyanogenMod 7.1
Diliban said:
Is it? I haven't tried that personally. Let me look around for some other thread for BA, If not I'll write one.. Moreover for CRT animation you just need to add # in build.prop
sent from my Samsung Galaxy Ace with CyanogenMod 7.1
Click to expand...
Click to collapse
What if I use ROM Toolbox software to backup and restore the boot animation (I have downloaded this software from android market)
shriramc4 said:
What if I use ROM Toolbox software to backup and restore the boot animation (I have downloaded this software from android market)
Click to expand...
Click to collapse
I haven't used Rom toolbox.. You may try yourself.. But I would suggest you use boot animation zip files
sent from my Samsung Galaxy Ace with CyanogenMod 7.1
Tried the tutorial all things worked good except the Boot Animation,
the instructions given in link are resulting into boot loop and unable to restore boot animation through Rom toolbox software
shriramc4 said:
Tried the tutorial all things worked good except the Boot Animation,
the instructions given in link are resulting into boot loop and unable to restore boot animation through Rom toolbox software
Click to expand...
Click to collapse
Thanks for the feedback. I have removed boot animation thread and I suggest all other users to have custom bootanimation before installing this mod.
Currently i dont think any boot animation will work on kq5. aint know about applying it on a rom with cf-root. diliban can u make a tutorial for that. and dude i think we should start a noobs guide for kq5 and kq6.
I tried old mods and crashed my phone. Is there any updated way of changing bootanimation and enable bootanimation.zip on Note 3 lollipop firmware.
bump
I would like to know this as well
bump ?
Have you changed directly in the zip before the flash the boot anim. ...????.
rayman95 said:
Have you changed directly in the zip before the flash the boot anim. ...????.
Click to expand...
Click to collapse
What do you mean by that exactly ?
zaidbaby said:
What do you mean by that exactly ?
Click to expand...
Click to collapse
On my kk rom I ve changed 2 files in the zip and flash it and now have custom boot anim. ...it should be the same for l. ..
here is nexus boot I use in kk rom
nexus boot
rayman95 said:
On my kk rom I ve changed 2 files in the zip and flash it and now have custom boot anim. ...it should be the same for l. ..
here is nexus boot I use in kk rom
nexus boot
Click to expand...
Click to collapse
No brother, its not the same. Samsung does not support bootanimation.zip.
zaidbaby said:
No brother, its not the same. Samsung does not support bootanimation.zip.
Click to expand...
Click to collapse
you dl it and replace the 2 files in the rom.zip
bootsamsung and loop
rayman95 said:
you dl it and replace the 2 files in the rom.zip
bootsamsung and loop
Click to expand...
Click to collapse
I am using Samsung's official lollipop rom. Rooted. It does not have bootanimation.zip neither can i find rom.zip. So i am confused what exactly are you talking about.
zaidbaby said:
I am using Samsung's official lollipop rom. Rooted. It does not have bootanimation.zip neither can i find rom.zip. So i am confused what exactly are you talking about.
Click to expand...
Click to collapse
I resume....dl the nexus boot...unzip it and you got 2 files.....
you copy it in system/media and give permission
rayman95 said:
you dl it and replace the 2 files in the rom.zip
bootsamsung and loop
Click to expand...
Click to collapse
Sorry for misunderstanding. Now i get it but the problem i have is. I have downloaded custom bootanimation.zip so how should i flash that as a custom bootanimation. The files you have given me are in qmg format.
zaidbaby said:
Sorry for misunderstanding. Now i get it but the problem i have is. I have downloaded custom bootanimation.zip so how should i flash that as a custom bootanimation. The files you have given me are in qmg format.
Click to expand...
Click to collapse
Use es explorer with root option and copy in system. Media and give permission
rayman95 said:
Use es explorer with root option and copy in system. Media and give permission
Click to expand...
Click to collapse
What exactly do i have to do ??
I need to flash the file you gave me with odin ? and then copy my bootanimation.zip in media ? If i am wrong can you please give me step by step instructions. Thank you
zaidbaby said:
What exactly do i have to do ??
I need to flash the file you gave me with odin ? and then copy my bootanimation.zip in media ? If i am wrong can you please give me step by step instructions. Thank you
Click to expand...
Click to collapse
dl
this and flash it in recovery.....
rayman95 said:
dl
this and flash it in recovery.....
Click to expand...
Click to collapse
This will enable the support for bootanimation.zip ?
Because the bootanimation i want is in bootanimation.zip format
rom tolbox pro doesnt work on lollipop i tried many time with es exlplorer i installed the new bootanimation.zip and for the ofiicial boot animation i changed the name to bootanimation.zip.bak restart but it's the same boot lo____ol
ayoubkechchour said:
rom tolbox pro doesnt work on lollipop i tried many time with es exlplorer i installed the new bootanimation.zip and for the ofiicial boot animation i changed the name to bootanimation.zip.bak restart but it's the same boot lo____ol
Click to expand...
Click to collapse
yeah that's what i am talking about.
SIMPLE INSTRUCTIONS TO ROOT XPERIA Z5 PREMIUM / E6833 / E6853 / E6883
FIRST put supersu (flashable zip) (SR3 of 2.78) in your SD CARD
DOWNLOAD your build (ftf) file as per country (or region) from
https://xpericheck.com/device/E6853
ORRRR ( Flashtoot.net)
you can use FLASHTOOL's XPERIFIRM (see fotos) / browse to your device and select build to download you .305 and flashtool will compile original ftf file and make it ready for your to flash! / switch off device, connect it in flashmode and perform clean flashing of .305 (as attached)
once flashed, now u need to flash kernel
download IMG FILE OF 32.2.A.0.305 from https://mega.nz/#F!KwZhjLIK!uNbDzR6l...FS1WQ!WpZAkLZC ( thanks to @KbaB.BroS)
connect device in FASTBOOT mode and select kernel to FLASH and flash IMG file
boot , on sony logo, press volume up key, it will take u to recovery, install from zip and flash the superSU zip from sdcard.
once done, wipe delvik cache (optional)
reboot
DONE
REMEMBER, THE WHOLE SAGA OF DRM KEYS IS SKIPPED
references
http://forum.xda-developers.com/z5-...ting-xperia-z5-z5p-variants-drm-keys-t3437902
kernels by @KbaB.BroS
http://forum.xda-developers.com/z5-premium/general/32-1-1-185-stock-modified-kernel-t3355369
Cannot download IMG FILE OF 32.2.A.0.305. It keeps asking for a decryption key.
Thanks
maskes said:
Cannot download IMG FILE OF 32.2.A.0.305. It keeps asking for a decryption key.
Thanks
Click to expand...
Click to collapse
@KbaB.BroS
please check this issue! / even i am getting the same problem now! it was working fine before
YasuHamed said:
@KbaB.BroS
please check this issue! / even i am getting the same problem now! it was working fine before
Click to expand...
Click to collapse
maskes said:
Cannot download IMG FILE OF 32.2.A.0.305. It keeps asking for a decryption key.
Thanks
Click to expand...
Click to collapse
They should work now, it became encrypted because I had to agree to a new policy. Same link.
Unfortunately the same thing is still happening...!
KbaB.BroS said:
They should work now, it became encrypted because I had to agree to a new policy. Same link.
Click to expand...
Click to collapse
still same problem
please check
YasuHamed said:
@KbaB.BroS
please check this issue! / even i am getting the same problem now! it was working fine before
Click to expand...
Click to collapse
maskes said:
Cannot download IMG FILE OF 32.2.A.0.305. It keeps asking for a decryption key.
Thanks
Click to expand...
Click to collapse
maskes said:
Unfortunately the same thing is still happening...!
Click to expand...
Click to collapse
YasuHamed said:
still same problem
please check
Click to expand...
Click to collapse
Please check now again.
It is still not working.
Now it says... "Folder link unavailable"
Im been trying lot of mod rom but nothing like official rom in speed vs batt saving.. Only one problem is kernel image link broken and sd card permission problem.. Can have any solution bout dis?
suffez said:
Im been trying lot of mod rom but nothing like official rom in speed vs batt saving.. Only one problem is kernel image link broken and sd card permission problem.. Can have any solution bout dis?
Click to expand...
Click to collapse
without root, you cannot give sdcard permission to third party app ~
Im already done flash kernel with recovery and sr3 supersu.. But still not done with sdcard permission..
** btw im found app marshmellow sd fix plus xpose and solve sdcard permission problem..
can't download kernel in the mega link. says no folder
Quayron said:
can't download kernel in the mega link. says no folder
Click to expand...
Click to collapse
sir @KbaB.BroS
YasuHamed said:
sir @KbaB.BroS
Click to expand...
Click to collapse
Quayron said:
can't download kernel in the mega link. says no folder
Click to expand...
Click to collapse
First of all, the link here and in my thread wasn't the same which explains why there weren't any folders, second of all I updated the link just now so make sure to get the latest one this time.
Hi Mega says the link violated some third party contract or something. could you please upload the mega link again? thank you
leonaheidern said:
Hi Mega says the link violated some third party contract or something. could you please upload the mega link again? thank you
Click to expand...
Click to collapse
i am sorry about that
i have saperate post on this topic with working kernels and rootmethods but Nougat build
https://forum.xda-developers.com/z5-premium/general/rooted-stock-modified-kernels-32-3-0-t3556874
Does it works on locked bootloader?
Hey guys
I already find way to compile to the latest twrp 3.1.0-3 unofficially, to fix some existing bugs in previous version twrp both official or unofficial, like in prevous twrp, if you try to encrypt your data, you will getting alot trouble or imposible to decrypt and enter and access data user again.
Bug fixs:
Encryption,
Decryption,
Aroma installer,
All are fully working properly
Flash with previous twrp recovery or by fastboot
How to flash:
https://www.xda-developers.com/how-to-install-twrp/
Unofficial-materialized-twrp-3.1.0-0-p2a42:
Updated on: 29/4/2017
https://mega.nz/#!rAQ2CCjS!lCzt34NzyVz1ZK7Gbg9zdJ0NVQ3udV2tekkWCxJ18AY
Unofficial-twrp-3.1.0-0-p2a42:
Updated on: 5/5/2017
https://mega.nz/#!XRQ2WbrD!tI4NuiZPDaIdXOvh1XEWDTt2Wp4We-9jHtTObyrSUuk
Unofficial-twrp-3.1.0-3-p2a42:
Updated on: 7/5/2017
https://mega.nz/#!DB4mCI4B!6qNmiPCa9RYz0O6qyumcKM-DzJip2gGcXOk93oX0IfU
Thanks to:
@teamwin
@celoxocis
Credit to: twrp team
Click to expand...
Click to collapse
Tried to flash it but I'm stuck on 3.0.3.0.
UPDATE: somehow sometimes my P2 boots version 3.0.2.0 and sometimes 3.0.3.0, but how?
ilmervanhattem said:
Tried to flash it but I'm stuck on 3.0.3.0.
UPDATE: somehow sometimes my P2 boots version 3.0.2.0 and sometimes 3.0.3.0, but how?
Click to expand...
Click to collapse
Just enter to twrp recovery mode click install section, click install image section on right bottom side, and navigate to where is twrp img that you already downloaded, and thick button on recovery option (make sure not to choose wong section other than thick recovery button), then flashed, next restart to enter to boot recovery one again.
hendibudi said:
Just enter to twrp recovery mode click install section, click install image section on right bottom side, and navigate to where is twrp img that you already downloaded, and thick button on recovery option (make sure not to choose wong section other than thick recovery button), then flashed, next restart to enter to boot recovery one again.
Click to expand...
Click to collapse
That's exactly what I did, but didn't work. Guess I'll flash it with fastboot.
ilmervanhattem said:
That's exactly what I did, but didn't work. Guess I'll flash it with fastboot.
Click to expand...
Click to collapse
Yes you can, just rename the downloaded file to twrp.img
Thanks for this version! The other twrps indeed are not working with aroma installers.
911-Future_Maker said:
Thanks for this version! The other twrps indeed are not working with aroma installers.
Click to expand...
Click to collapse
Finally i just make latest twrp-3.1.0-0 unofficial for lenovo p2a42, fix bugs encryption and decryption
Nice OP!
hendibudi said:
Finally i just make latest twrp-3.1.0-0 unofficial for lenovo p2a42
Click to expand...
Click to collapse
Lol Congrats bro! :highfive: I'm using your deodexed rom and your twrp.
911-Future_Maker said:
Lol Congrats bro! :highfive: I'm using your deodexed rom and your twrp.
Click to expand...
Click to collapse
I already file deodexed rom for nougat, after examine still one bug there.
hendibudi said:
I already file deodexed rom for nougat, after examine only one bug there, so i doubt to upload.
Click to expand...
Click to collapse
Hell yeah! Thanks man!
For some reason I can't install the latest materialiazed 3.1.0.0 via the flash image in twrp. It installs, but the theme is the standard, not like in the screenshots. I didn't tried the fastboot method as I'm lazy.
Thanks bro.. i'll try this!!
hendibudi said:
Flash with previous twrp recovery or by fastboot
Click to expand...
Click to collapse
Maybe the question sounds stupid but why it is not allowed to flash update.zip ( TWRP inside ) with original Lenovo recovery ?
pabgar said:
Maybe the question sounds stupid but why it is not allowed to flash update.zip ( TWRP inside ) with original Lenovo recovery ?
Click to expand...
Click to collapse
Because the stock recovery sucks on all phones without exception.
Hai hendibudi i allready install your twrp
But when i enter twrp mode power + vol-/+
Its show lenovo recovery
Why or something wrong?
rudim12f said:
Hai hendibudi i allready install your twrp
But when i enter twrp mode power + vol-/+
Its show lenovo recovery
Why or something wrong?
Click to expand...
Click to collapse
sorry it's solved (before reboot system i have to reboot to recovery first)
but after that before entering twrp always shown pattern lock
please help and btw i used twrp 3.1.00
thanks before
rudim said:
sorry it's solved (before reboot system i have to reboot to recovery first)
but after that before entering twrp always shown pattern lock
please help and btw i used twrp 3.1.00
thanks before
Click to expand...
Click to collapse
To prevent twrp ask for code security, use second line when you wanna create security, if twrp ask code security, remove your security first and create new one like above
hendibudi said:
To prevent twrp ask for code security, use second line when you wanna create security, if twrp ask code security, remove your security first and create new one like above
Click to expand...
Click to collapse
thank you hendibudi its work
just one more try to root systemless not work for me also materialized not work still with old one
i want your suggestion for this
rudim said:
thank you hendibudi its work
just one more try to root systemless not work for me also materialized not work still with old one
i want your suggestion for this
Click to expand...
Click to collapse
Thanks, i updated the file you can download again for material theme
i want to unroot my device and lock bootlaoder again.like stock with bootloader locked.help
akshakya7 said:
i want to unroot my device and lock bootlaoder again.like stock with bootloader locked.help
Click to expand...
Click to collapse
Use magisk zip uninstaller and msm, works for me.
Just msm it back to stock if you want a full wipe and reload.
Dark Nightmare said:
Just msm it back to stock if you want a full wipe and reload.
Click to expand...
Click to collapse
What is msm can you provide link or related video
akshakya7 said:
What is msm can you provide link or related video
Click to expand...
Click to collapse
Check the general forum; multiple versions in there.
akshakya7 said:
i want to unroot my device and lock bootlaoder again.like stock with bootloader locked.help
Click to expand...
Click to collapse
Just hit unroot on magisk and your done
akshakya7 said:
What is msm can you provide link or related video
Click to expand...
Click to collapse
Look here https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Anyone have any idea how to restore it in Mac?
https://forum.xda-developers.com/showpost.php?p=77982228&postcount=11
So I'm on 9.0.11 and I have an ota update. What if I just download and install that? Will I be put in a boot loop? I currently have magisk and TWRP installed.
kischoaf said:
So I'm on 9.0.11 and I have an ota update. What if I just download and install that? Will I be put in a boot loop? I currently have magisk and TWRP installed.
Click to expand...
Click to collapse
Look here: https://oneplus.gadgethacks.com/how...thout-losing-root-no-computer-needed-0192638/