This phone is SLIPPERY! - Xperia Z3 Compact General

I appreciate the new glass back, but hell its slippery as lube. Already fell of my table twice. I dont understand how lol. Even fell of my wallet which is made of leather.
anyone else?

It's the same than with my previous Nexus 4.
You just have to avoid putting it on a non-horizontal surface :angel:

Yes if your hands are sweat or wet the device can be slippery sometimes. Thank god the plastic frame makes very good grip and they did very well they didn't put metal instead. I have gone running with the device many times and the plastic frame did a very good grip on my sweaty hands but when i touched the glass it felt a little slippery though.

It is extremely slippery. The vibrations caused by my surround system on my TV causes my Z3C to move across the table and fall onto the floor. I don't even have the volume very loud. I now have a rubber and metal case which fixed the issue. I usually don't use cases...but I do with this phone.

Mine almost fell off the fireplace once when it rang. I now have a Cruzerlite case installed.

Avoid putting the phone on the edge of the table and if possible use leather cases and avoid the metal and hard plastic ones. The glass makes this phone look premium and beautiful but it also has its disadvantages.

Related

Screen Protector Reusable???

I had a Tilt and a screen protector that was just a plastic. It's reusable because I would just tuck the plastics into the edge of the screen.
Now, I got a Brando Screen Protector at home, which states reusable.
How are these washable/reusable screen protectors work with our phones? Is it pretty secure to wash and put it back on? I did it a lot with my tilt but I have no idea about the screen protectors regarding the Fuze.
currently I have a crappy one I bought from BestBuy and it is all scratched up, so thinking about switching to my Brando one.
Thanks in advance!
Rytt
With most screen protectors you can wash them in light soapy water (maybe dip it in a cup with light soapy water). Shake the screen protector to shake off excess water, then use a blow drywer to dry off the rest of the water. You might have to do this a few times. You might catch some more dirt. (!)
Sometimes this works...sometimes it doesn't and you're just screwed and ending up having to buy another.
I've been using Martin Fields and haven't have a problem with washing them. You just need to be in an area that is dust free and clean.
bfspider said:
With most screen protectors you can wash them in light soapy water (maybe dip it in a cup with light soapy water). Shake the screen protector to shake off excess water, then use a blow drywer to dry off the rest of the water. You might have to do this a few times. You might catch some more dirt. (!)
Sometimes this works...sometimes it doesn't and you're just screwed and ending up having to buy another.
I've been using Martin Fields and haven't have a problem with washing them. You just need to be in an area that is dust free and clean.
Click to expand...
Click to collapse
How does it stay on your screen then if you wash it in water?
Doesn't the sticky part of the SP stop sticking?
No, actually it works really well just rinsing it under warm water (I didn't use any soap). I'd say 100% that it's definitely re-usable.
I was wiping fingerprints off mine on a wool blanket and a corner came up, half the screen protector came off, and the underside rubbed against the blanket, picking up a ton of dirt and fibers.
I took it off and rinsed it off pretty forcefully, and even used my fingernail to scrape the dirt and fibers off. When I was done it felt like the adhesive was mostly gone while damp but as it dried it was sticky again. I flicked off most of the water and put it on the freshly windexed phone (spray the towel once, not the phone!). There were still some tiny water droplets on the protector when I put it on but I gently squeezed them to the edge as I put it back on and they all squeezed out.
The protector still has a slightly mottled appearance which I figured was from scraping all the adhesive off in some areas but it turns out it's tiny amounts of moisture under the protector. Over the next 24 hours the mottled appearance dried and faded and the protector was like new again, 100% crystal clear. It even still great adhesive abilities even though I was literally scrapping at it under the warm water.
At the mall I notice the people that do the invisi-shield covers do it the basically the same way but use a hair drier to get rid of the mottled appearance quicker.
Bottom line. I scrubbed the protector pretty good because I thought it was a lost cause and afterward is was as good as new (better since it's on straight now with no edges to catch), so don't be too afraid to wash an re-use it if the underside gets dirty. Plus I make it sound like there is a risk of getting your phone wet but only if you drop it in the sink. The amount of water on the protector after flicking it few times is no more than if you get a few snowflakes on it and wipe them off with your hand.
Kerensky97 said:
No, actually it works really well just rinsing it under warm water (I didn't use any soap). I'd say 100% that it's definitely re-usable.
I was wiping fingerprints off mine on a wool blanket and a corner came up, half the screen protector came off, and the underside rubbed against the blanket, picking up a ton of dirt and fibers.
I took it off and rinsed it off pretty forcefully, and even used my fingernail to scrape the dirt and fibers off. When I was done it felt like the adhesive was mostly gone while damp but as it dried it was sticky again. I flicked off most of the water and put it on the freshly windexed phone (spray the towel once, not the phone!). There were still some tiny water droplets on the protector when I put it on but I gently squeezed them to the edge as I put it back on and they all squeezed out.
The protector still has a slightly mottled appearance which I figured was from scraping all the adhesive off in some areas but it turns out it's tiny amounts of moisture under the protector. Over the next 24 hours the mottled appearance dried and faded and the protector was like new again, 100% crystal clear. It even still great adhesive abilities even though I was literally scrapping at it under the warm water.
At the mall I notice the people that do the invisi-shield covers do it the basically the same way but use a hair drier to get rid of the mottled appearance quicker.
Bottom line. I scrubbed the protector pretty good because I thought it was a lost cause and afterward is was as good as new (better since it's on straight now with no edges to catch), so don't be too afraid to wash an re-use it if the underside gets dirty. Plus I make it sound like there is a risk of getting your phone wet but only if you drop it in the sink. The amount of water on the protector after flicking it few times is no more than if you get a few snowflakes on it and wipe them off with your hand.
Click to expand...
Click to collapse
Thanks! I will put on my Brando shortly! Hope it works as wells as you said!

How to avoid cracks?

I just ordered a Nexus 4 a few hours ago. I was stuck between it and a Note 2 but in the end I went for the Nexus 4 and I'm hoping that I made the right choice.
The main thing I'm worried about is it cracking; apparently, some people have had the back of the phone crack without it being dropped. What would be my best bet to prevent said cracking? I imagine a full case would be best though I'd rather not have to use one if possible. Would a back screen protector prevent cracking (not from drops of course, but from normal use) or would I need a bumper as well?
Be careful and avoid any rapid changes in temperature. I am not going to case my phone, maybe the bumper at the most to prevent slippage, even non-strengthened glass is pretty tough. But yeah; don't be scorching your device with benchmarks and then set it down on a cold marble surface, juggling it, or setting it down on uneven surfaces and you should be set.
Not dropping it or bump it into anything (in your hand, pocket) and you'll be fine. Oh, and don't put it on the armrest of the couch.
The bumper can give you a extra safety boost.
I wish I was in a position to test this but in my mind something like the invisishield stuck on the glass should make it more resilient but I have no evidence other than my own logical though
That being that if you do place your phone down on anything slightly uneven the glass is having a concentrated pressure through a point in the glass. Thus it cracks at that point.
By applying an additional layer over the glass, as long as the phone isn't thrust into a single point of impact, simply laying the phone on an uneven surface the pressure would be spread over the surface more evenly.
A bit like if you try slapping your leg. It hurts. Now place your other hand on your leg and slap your hand on your leg. You still feel it and your other hand is in contact with your leg so the force should still transfer through but its actually much less.
Now someone would have to test this and find out at what thickness a film would have to be to have similar properties of protection but it should be possible. Well in my head anyway
Sent from my Galaxy Nexus
That's a good point. I also realized that keeping a transparent screen guard on the back glass makes it less slippery and less likely to slide off surfaces
Sent from my Nexus 4 using Tapatalk 2
In-pocket flexing was an issue from one crack I read about. Be careful not to sit on the little bugger, or put it in your effing skinny jean pockets and do gymnastics.
I've been thinking that putting some small rubber feet on the back glass would help prevent it come in contact with surfaces. I do have a bumper case incoming which should prevent that problem anyway but I don't know when it will even arrive lol.
Sent from my Nexus 4 using Tapatalk 2
Even though I love the phone without the case cause it looks great, but I wouldn't use it without a case for too long. I have bought front and rear protectors for xtremeguard and I bought me a clear TPU case for now. I do want the bumper case but that thing is impossible to get for now.

Case suggestions

Hi,
I'm looking at various cases for the Nexus 4, and wondering what everyone thinks of them.
I've never used a case for any of my phones before, and I've never really minded the scratches, nor have I gotten any cracked screens despite dropping my phones dozens of times. However, the Nexus 4's glass surfaces have got me thinking perhaps it's a good idea to get some protection.
I'm primarily protecting against scratches, and the occasional drop. I'd like the thinnest and most non intrusive case possible, and one with some grip so the phone doesn't fall so easily.
So far, my choices seem to be Nillkin, Rearth, Poetic and Diztronic. I'm leaning more towards hard cases than soft TPU cases due to aesthetics.
Any pros and cons for the above?
Thanks!
This is exactly what we need, there doesn't seem to be much comparision between tpu and hardcases.
How does the S-Line case compare to others say as it's only around £3 which is dirt cheap but is it crap and wouldn't protect my Nexus at all (If it actually arrived that is )
I'm definitely curious to the difference between soft and hard cases. In my experience some hardcases are damaging the phone a little...
DutchDisturbed said:
I'm definitely curious to the difference between soft and hard cases. In my experience some hardcases are damaging the phone a little...
Click to expand...
Click to collapse
UPDATED 2013-06-07
OK. Let me try since I've tried 9 cases and I'm not 100% happy with any of them. I was spoiled by the Galaxy Nexus Ringke Slim case. Super Slim, all edge protection in a drop and super grippy. Nothing I've tried for the N4 yet has given me the same satisfaction.
These are in the order that I purchased them.
1. S-Line (TPU)
Like: Cheapest of the bunch. The soft rubber gives the most grip of all the cases I have.
Don't Like: IMO it looks ghetto. Poor molding so there are sharp edges everywhere. I guess you could trim this but it already looks like a hack job. The buttons are covered and are difficult to push.
Overall: I tried this for 5 seconds and then tore it off. Garbage.
2. Rearth Ringke Slim (hard case) - MY CURRENT CASE.
Like: Slimmest of all of the case I have. Super tight fit. Looks awesome. Buttons are exposed and are fairly easy to reach. If you want slim, this is a nice case. Judging from the photos I've seen of the Diztronic slim equivalent, it also gives better corner coverage.
Don't Like: Rearth changed the material and design from the Galaxy Nexus which was my favourite case. The material isn't as grippy and offers no protection in a drop to the front/top and front/bottom. The Gnex version was way better as it totally covered the top/bottom front and was super grippy....so I'm super disappointed in the N4 version.
Overall: Even with the negatives I mentioned, I keep coming back to this case for my daily use. It's the best blend of looks, feel (big time) and protection for slim case.
3. Poetic Bumper (Bumper)
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
Don't Like: Makes the phone feel wide. There's no backing so it's not as comfortable to hold compared to a case with a backing. This isn't something no one seems to talk about...it just feels odd. Makes one-hand operation tough.
Note: The back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand). I rocked a DBrand vinyl rear cover for a while with this bumper and really liked it. Great way to customize the look of your phone and you're not constantly cleaning the N4's glass back.
UPDATE:. I've realized I don't like bumpers. The feeling of the recessed back kills it for me. This bumper/vinyl combo is excellent for protection, button feedback and looks....but the recessed back is a deal breaker for me. Just a personal preference.
4. Diztronic (TPU)
Like: Feels great in the hand. Solid. Probably my fav in terms of feeling. Great build quality. Confidence in a drop situation. Looks great.
Don't Like: Suffers from the same problem as the Rearth hard case. Material isn't grippy. Feel like it's going to slide off a slanted surface. Buttons are covered and because the rubber is stiff, it's hard to push and there's very little feedback. The lip that surrounds the screen is pretty pronounced... occasionally get's in the way of swiping. Not as bad as the Mercury though.
Overall: Although it has some negatives it the best of the TPUs I've tried.
UPDATE: After reading some other posts on the topic, I used an Exacto blade to put little slits along the edges of the molded buttons and it made a huge difference in button feedback. I really like the case now. This is my "rough activity" case.
5. Official Nexus 4 bumper (Biggest mistake purchase)
Like: Looks cool. Best button feedback (feels like the original button). Good drop protection as all sides are covered.
Dislike: Widest case on the list. The hard plastic sides make it slippery and uncomfortable. Port/mic holes are smaller than the Poetic. The back plastic edge is dimpled which a) is uncomfortable and b) makes it slippery on a surface (or more so than the Poetic). The USB port hole is deep so you need a skinny USB cable end. Oh ya, and the price is ridiculous. After shipping and taxes it was $33.
Note: Like the Poetic bumper the back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand)
Overall: This was my biggest waste of money of all the cases. Far to expensive for what you get. Get the poetic.
6. Meifeng Hard Skin Cover Case (Hard case)
Like: Great feeling. It's a hard case but the coating on it makes it feel squishy. Grip feeling is excellent. Button and port openings are excellent...better button openings than the Ringke Slim. Although I've only had this one for 30 minutes it doesn't appear to be a fingerprint magnet like the Ringke is. Wow. I really like this case. Inexpensive too...$7.
Dislike: Like the Ringke Slim the top/bottom front edges are totally exposed so no protection on those edges. Corners are covered but not as much as the Ringke Slim.
Overall: Want a slim case that feels good that protects the sides and back, this is the case. I'll post some pics in this thread.
eBay Link
7. Rearth Hybrid
I'm a huge fan of Rearth because of my previous purchases. Unfortunately, the Ringke Hybrid is a big miss.
Likes: Very small lip on the holding on to the LCD screen which makes it easy to do edge to edge swiping. The clear plastic (when not covered in fingerprints) looks cool.
Dislikes:
1) The button feedback is almost non-existent so you can never tell if you've pushed them hard enough. You can mod by cutting the button sides but you should have to if it was designed properly.
2) The clear plastic back, although good in theory, is terrible in practice because it's a fingerprint magnet, dirt/dust/fuzz is impossible to keep out so you see it, and I imagine that the first scratch I get will ruin the look of the case.
3) The small 4 feet that keep the back off a flat surface provide no grip. The phone slides very easily. The feet also feel awkward when handling the phone.
4) On my particular model there was a small molding defect. It wasn't a big deal but not in line with Rearth's high quality products.
Rearth took a chance on a unique design so I applaud them for that. But I would not recommend this case.
http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
Overall: A lot of people like this case but, next to the S-Line, this is my least favorite. Great in theory...awful in practice.
8. Poetic Palette slim hardcase UPDATED
Like: Excellent feeling coating on the plastic. Even better than the Meifeng. It's also grippy in the hand and on flat surfaces. Not as much as the Meifeng but more then the Rinkge. The bottom and top edges of the case cover more than 50% of the top/bottom edge of the phone giving it more protection on those edges than the Ringke Slim and Meifeng.
Dislike: It doesn't have raised corners like the other two so you get very poor screen-down protection. I would never but my phone screen down with this case. Less corner protection than that Ringke Slim but more than the Meifeng. It has the smallest button openings of all the slim cases. They've put slits on each corner to make it easier to take the case off but that gives it a very lose fit. I'm not going to test it but I'm willing to bet that your phone would pop out of the case if dropped. It's also the widest of the hard cases cases I've reviewed making it less comfortable to hold than the other two,
Overall: If you take your phone out of it's case to clean often, this is your case.
9. Mercury TPU UPDATED
Like: Looks. I have the black one and the sparkle effect is really nice. As long as it's somewhat free of fingerprints, it's pretty grippy too. Great protection as the rubber is soft and covers all front edges of the screen.
Dislikes: The button cutouts are the smallest of all the cases making it uncomfortable to push a button. The cutouts for the mics/speakers are a little off. That doesn't cause a function issue but looks ghetto. It's a fingerprint magnet. The overall fit isn't that good so when you grab it from the sides you can see that the case deform slightly. The mold lines bad and noticeable to the touch. Although I don't have a scale, I feels like the heaviest of the bunch. Also the raised front edge the surrounds the screen is big making the screen look recessed and makes it tough to touch the edge of the screen.
Overall: Not recommended. If you want TPU spend the extra few bucks on the Diztronic and you'll be way happier. This is a "you get what you pay" for case.
So my personal ranking choices are:
Slim hardcase: Rearth Slim because of the feeling (almost like there's no case), superior slimness, great button cutouts, full exposed ports, and looks. Meifeng is the runner up because of the cost, great feeling due to grippy coating and big button cutouts.
TPU: Diztronic TPU because of protection, button feedback (after slits made), feel in the hand and looks. Don't bother with anything else.
Bumper: No brainer. Poetic for the button feedback, surface grip due to rubber edges and protection.
goister said:
Hi,
I'm primarily protecting against scratches, and the occasional drop. I'd like the thinnest and most non intrusive case possible, and one with some grip so the phone doesn't fall so easily.
So far, my choices seem to be Nillkin, Rearth, Poetic and Diztronic. I'm leaning more towards hard cases than soft TPU cases due to aesthetics.
Any pros and cons for the above?
Thanks!
Click to expand...
Click to collapse
I think you are going to have a hard time satisfying all your conditions. The hard cases I have seen do not provide the best protection due to the stiffness of the material. More shock is going to be transmitted to the device and less absorbed by the case. Also many of the hard cases I have seen leave a portion of the bezel open where a drop could damage it. The tpu cases are thicker but that thickness provides protection. The elastic nature of polyurethane provides some shock protection. Also the tpu is much better than the older silicone cases as far as friction being removed from a pocket (also not as bad a lint magnet). It all comes down to how much risk your phone is exposed to and how much you are willing to compromise your desires. Me, I feel this phone is relatively fragile and I err on the side of protection. If you are only concerned about scratches just get a screen and back protector.
AdamUpNorth said:
<snip>3. Poetic Bumper (Bumper) - MY CURRENT CASE.
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
<snip>).
Click to expand...
Click to collapse
Glad I went with the poetic bumper case.I just couldnt get down with spending so much for the official google one. It Should be delivered today. Now if I only I had my nexus 4 already lol:silly:
i have a Rearth Ringke Slim (hard case) and i like very much
I just ordered one from diztronic. Pretty simple basic TPU.
Stanerefor said:
I just ordered one from diztronic. Pretty simple basic TPU.
Click to expand...
Click to collapse
Let us know what you think of it and whether it would survive a drop from say chest height.
On a different note, what do people think of this case, it seems like a hard case with a leather cover over the screen which double up as a stand for the screen. Thinking this would be very useful for watching or reading a pdf off the screen.
What kind of case are you guys thinking, im torn between diztronic, a bumber and the above case.
mufc09 said:
Let us know what you think of it and whether it would survive a drop from say chest height.
On a different note, what do people think of this case, it seems like a hard case with a leather cover over the screen which double up as a stand for the screen. Thinking this would be very useful for watching or reading a pdf off the screen.
What kind of case are you guys thinking, im torn between diztronic, a bumber and the above case.
Click to expand...
Click to collapse
Although I wouldn't test it, I would say the Diztronic TPU would save the phone in a chest height drop.
The cover case you linked to looks good. For me it's a no go because I look at my phone too many times a day so the cover would drive me nuts.
As promised in post 4, here are some pics of the Meifeng Hard Skin case. Love the feeling of this thing. See my 2 cents in post #4.
AdamUpNorth said:
As promised in post 4, here are some pics of the Meifeng Hard Skin case. Love the feeling of this thing. See my 2 cents in post #4.
Click to expand...
Click to collapse
Hey is that a glass screen protector you have on? Seems thick, just want to confirm. If so which one? TY
Crisisx1 said:
Hey is that a glass screen protector you have on? Seems thick, just want to confirm. If so which one? TY
Click to expand...
Click to collapse
No, it's the Rearth Ultimate Clear Plus (link)
The original one without the proximity sensor cut out...although I've never had a problem with that.
It is a little thick but the way the light is catching it makes it look much thicker than it is.
AdamUpNorth said:
No, it's the Rearth Ultimate Clear Plus (link)
The original one without the proximity sensor cut out...although I've never had a problem with that.
It is a little thick but the way the light is catching it makes it look much thicker than it is.
Click to expand...
Click to collapse
Oh gotcha... this is what I just bought: http://www.spigen.com/cell-phone/google/nexus-4/google-nexus-4-screen-protector-steinheil-dual.html
Hopefully its as good.
AdamUpNorth said:
Although I wouldn't test it, I would say the Diztronic TPU would save the phone in a chest height drop.
The cover case you linked to looks good. For me it's a no go because I look at my phone too many times a day so the cover would drive me nuts.
Click to expand...
Click to collapse
I did this a couple of days ago with my Diz TPU. I was pulling the phone out of my shirt pocket and it slipped out of my hand and landed on the concrete sidewalk face down. As i was going to pick it up I was expecting the worst but when I turned it over not a scratch. The case has a few scuff marks though, I can live with it.
joe rz said:
I did this a couple of days ago with my Diz TPU. I was pulling the phone out of my shirt pocket and it slipped out of my hand and landed on the concrete sidewalk face down. As i was going to pick it up I was expecting the worst but when I turned it over not a scratch. The case has a few scuff marks though, I can live with it.
Click to expand...
Click to collapse
Good stuff!!
Sent from my Nexus 4 using xda premium
What about a bumper + a best screens ever screen protector ?
Sent from my Nexus 4 using xda app-developers app
Here is the case I bought...
http://www.amazon.com/gp/product/B00AH86WMU/ref=oh_details_o00_s00_i00
Anyone who has bought this, feedback is appreciated
AdamUpNorth said:
UPDATED 2013-02-05 7pm EST
1. S-Line (TPU)
Like: Cheapest of the bunch. The soft rubber gives the most grip of all the cases I have.
Don't Like: IMO it looks ghetto. Poor molding so there are sharp edges everywhere. I guess you could trim this but it already looks like a hack job. The buttons are covered and are difficult to push. Tried this for 5 seconds and then tore it off.
3. Poetic Bumper (Bumper) - MY CURRENT CASE.
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
Don't Like: Makes the phone feel wide. There's no backing so it's not as comfortable to hold compared to a case with a backing. This isn't something no one seems to talk about...it just feels odd. Makes one-hand operation tough.
Note: The back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand). I have a screen protector (which is really slippery when finger grease is on it so I've ordered the carbon fiber vinyl back from DBrand..it's in the mail).
Click to expand...
Click to collapse
I have the poetic bumper and the TPU S-Line Case and agree with this review. I'm currently using the poetic bumper for the exact same reasons mentioned above. I think I'm going to order the Diztronic Matte Back Black TPU Case since it seems to offer more protection. Has anyone ever purchased accessories from HandHeldItems.com (really inexpensive but not sure if thats good or bad)? I purchased a couple of cases (hard case and soft gel case) and a few screen protectors from them and will see how they are when I receive them.
These are the two cases I ordered:
Black Rubberized Hard Case
Slim Fit Flexible Jelly Rubber Case
AW: Case suggestions
mammenj said:
Anyone who has bought this, feedback is appreciated
Click to expand...
Click to collapse
You could be the first

Full rugged case for the beach and outdoor activity

Hi All,
tried to search but couldn't find anything.
is there a case for the N4 that covers the entire phone (including the screen and ports) and that will protect it from sand, dust and will give it some kind of splash-proof properties?
hopping to find something similar to the Trident Cyclops case for Nexus S (cant post links yet) i had
Thanks!
Only case I've found that comes close to what you're looking for is the Seidio Convert. It has rubber plugs that cover all the ports as well as the camera but do not cover the mics or screen. The holster does provide good screen protection but not for sand. That being said it is two cases in one and because the convert actually fits over their Surface case it makes the phone rather bulky. I rarely use the convert other than when I need the extreme protection it provides.
Sent from my Nexus 4 using xda premium
Thanks Beaird,
that looks nice. i guess ill get that if nothing better will pop out until summer.
I know this sounds cheap as hell but my "case" for the beach is a ziplock bag. I get the smaller snack bag that is just wide enough, put the phone in and then suck out air with a straw. I did this with the GNex with a TPU case on for some impact but, honestly, in sand there is not much risk of impact.
Worked great. I obviously didnt take the phone boogie boarding but it did get plenty wet without issue. The touch screen worked perfectly through the plastic.
that's actually what i did last time.
not too fond of this solution as the plastic distorts the camera a bit.
But its better than all the other fancy alternatives!
Would love to have one of these for the Nexus 4. iThingies always get all the cool stuff!
ryan stewart said:
I know this sounds cheap as hell but my "case" for the beach is a ziplock bag. I get the smaller snack bag that is just wide enough, put the phone in and then suck out air with a straw. I did this with the GNex with a TPU case on for some impact but, honestly, in sand there is not much risk of impact.
Worked great. I obviously didnt take the phone boogie boarding but it did get plenty wet without issue. The touch screen worked perfectly through the plastic.
Click to expand...
Click to collapse
Sand will kill your phone.
Glass only scratches with sand basically and we can blame it on sand because it is abundant.
That’s exactly what I’m afraid of. Got a replaceable screen protector for scratches. But nothing better for sand penetration than a simple plastic bag :laugh:
The lifeproof case does look like ultimate solution!
I’ll shoot the lifeproof people a mail. Who knows we might get a decent case after all
thanks Solutions Etcetera for pointing them out

Ordered the S7 Edge, I'm scared I'll drop it and break it....

Currently I'm using an S5 without any cases or covers, and it's still drop-proof, dropped it multiple times on hard floor/concrete and there is no damage on the screen what so ever. And before that I had an HTC One X, which is probably more similar to the Edge in that the screen isn't protected if it drops face down, I did eventually crack it with that kind of a drop. However the edge is gonna be even more problematic because even the back is glass, and no plastic protruding edge to protect it.
Sure I could put it in a bulky case but then it kind of defeats the purpose of having one of the most premium feeling phones ever doesn't it? It'll also negate any ergonomic benefits of the curved back edge as well as the ease of edge swipe on the front edge. Might as well just get something like a.... I don't know, nobody makes high end plastic phones anymore now days, even cheap phones like One Plus is front+back curved glass. Also this thing is already a bigger phone than what I'm used to, adding a beefy case is just gonna make it that much bigger, which I do not like.
Well I guess plenty of people did survive the iPhone 4 glass sandwich era just fine, I'll just have to wish myself luck. I wonder how much would one of those adhesive skins help in a drop situation. Sure they are very thin but if think about the physics of it, gorilla glass is actually quite flexible so it doesn't break from the acceleration of the impact itself, so thinness doesn't really matter. What actually breaks these surface hardens glass is usually a microscopic failure on the surface developing into a big crack. And those microscopic failures can happen when they make contact with sharp hard stuff like individual sand particles, they effectively puncture the surface and develop a weakness. So if you have a skin on the glass, what'll hopefully happen instead is that the skin will be thick enough for the particle to not make direct contact with the glass, and prevent breaking. Even though such thin skins cannot significantly reduce the impact acceleration.
I understand your points, but please, don't ever try to use this phone naked. You NEED a case, the grip is so bad that dropping it is almost a guarantee and the back glass seems to be much more fragile than the front glass from what I have seen in videos. About the cases, you may want to look into the Samsung official plastic backs or (when available) the leather backs. The official plastic back cases from Samsung are the only ones (in my opinion) that really do not ruin the phone's design, the design remains almost intact. However, while the grip is much improved over the naked phone, it is nowhere near other bulky and rubberized cases. A rubberized plastic wrap would be a solution, but the big problem still remains - the metal sides of the phone which are very narrow.
PS: As I understand from the latest spy pics, the iPhone 7 will have a glass back again...probably needed for radio/charging/payment/other secret developments.
There are plenty of case available that won't make the phone look s**t. I'm using a Spigen Crystal Clear, a very good combination of protection and looks. It's impossible to completely keep the phone's look and feel, but it's probably as close as possible whilst being confident of being able to accidentally drop it from pocket height without damage.
Glass protectors on these curved screens are to be avoided, that's my personal opinion anyway. My brother bought numerous types of these for his S6 Edge (expensive and cheap) and not one went on properly without raising on the curves within twenty minutes, causing touch problems on the edges. Go for a good quality film type like a Zagg HD Dry.
I copied you entirely mate I'm not ashamed to say. Got my Spigen Crystal Clear yesterday and, your right, it does look good, but not as good as the nekkid phone itself. But I guess that's the price of good protection.
Just waiting for my Zagg HD Dry front and back covers to arrive today.
I'm personally using Otter Box Commuter for me and my wife's phone. I was able to try it on in store before purchasing. I was sort of desperate for a case on delivery day and it was the most protective case I found. I'm happy with it overall. It's sleep and slim and although the whole front in uncovered it does have raised top and bottom edges so if the phone falls flat the screen doesn't actually touch the floor.
Sent from my SM-G935F using Tapatalk
Use it naked.
Control your fingers.
nobnut said:
Use it naked.
Control your fingers.
Click to expand...
Click to collapse
Too risky lol
Sent from my Blackberry Bold
I would love to use the phone naked as it just looks so good, but I am scared to risk it. I have never dropped and cracked a phone, and I had an Iphone 4S without a case for 2 years which were well known for getting smashed, I have a clear case on the edge at the moment to offer it some protection.
Carrying and using smart phones without any case is just asking for trouble. I have the S7 Edge and when it arrived on March 2nd it stayed at home in the box until my Spigen Ultra Hybrid case arrived (which was a few days later). I was still using my S5 because I didn't want to take any chances.
After my case arrived I put it on but I still keep the original plastic film on the screen because I was waiting for my Skinomi screen protector to arrive. My Skinomi arrived yesterday and I installed it last night.
So if you don't want a bulky case get the Spigen Ultra Hybrid (I went with the crystal clear color). I ordered my case and screen protector from Amazon. The case is very nice looking and doesn't add any bulk to the phone.
Sk17z0 said:
but I still keep the original plastic film on
Click to expand...
Click to collapse
Oh my.
I'm using this case. It's amazing. Thin, easy to grip and not too expensive.
http://www.bodyguardz.com/unequal-shock-case-samsung-galaxy-s7-edge.html
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Juuls said:
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Click to expand...
Click to collapse
Q.E.D.

Categories

Resources