Related
The problem is I can't unbrick and restore my nexus to stock rom.
I can't boot the device and I'm only able to boot to bootloader. However, my computer doesn't recognize the nexus. It keeps saying Window cannot recognize it whenever I plug my tablet to the computer in bootloader. I tried uninstall and reinstall driver several times, but none of them seems to work . ----> That means I can't even use adb to restore the phone simply because my tablet is not recognized in window.
Is there anyway to fix this problem? I really need your helps as soon as possible.
Thank you for reading !
Get to bootloader. Then use Wugs toolkit, open advanced options. On the very left is something like "temp boot to recovery". Once that boots it to recovery, ADB should work. It did for me. I was in some trouble last night and got out by this. If you know how to use adb/fastboot commands, you should be good. And I uninstalled my drivers and when I plugged it in the device automagically reloaded the drivers. But you have to do it a few times. Had to do it in bootloader, recovery, and another point. Anytime it asks to load drivers/etc do it.
I can't boot to recovery through Wug Tool Kit. It keeps saying Fastboot device was not found >"<
By the way, whenever I connnected my device to computer, the bootloader freezes :|
What were you doing before you go into this situation?
I was on Glazed Jelly Bean rom and wanted to go back to stock rom. I used nexus 7 toolkit to do all the work for me. However, there was something wrong like the toolkit didnt extract the stock img right or something like that, my tablet got bootloop, and what happened next was what i had been telling you guys.
Best bet is if somehow you could get into recovery or get adb working. Might want to uninstall drivers and install again and reboot computer. I would suggest using this thread and flash things manually back to stock. http://forum.xda-developers.com/showthread.php?t=1907796 but you would need adb working.
When you power off device and use volume and power can you get it to go into boot loader then plugged into computer try to get to recovery or adb.
Consider deleting the drivers from Windows after uninstalling them otherwise Windows may try to be "clever" and reinstall the bad driver when you plug the device in. The Nexus 7 drivers from Asus can be downloaded here and Google's USB drivers are here
Travisdroidx2 said:
Best bet is if somehow you could get into recovery or get adb working. Might want to uninstall drivers and install again and reboot computer. I would suggest using this thread and flash things manually back to stock. http://forum.xda-developers.com/showthread.php?t=1907796 but you would need adb working.
When you power off device and use volume and power can you get it to go into boot loader then plugged into computer try to get to recovery or adb.
Click to expand...
Click to collapse
What if I couldn't get adb working?
I tried everything and windows still doesn't recognize my device in fastboot
Have you tried Nexus Root Toolkit v .1.5.4?
kiddo94 said:
I tried everything and windows still doesn't recognize my device in fastboot
Click to expand...
Click to collapse
try connecting to the usb port at the back of your computer
Paranoid flashed with the bricked kernel did this to me once right after the move to 4.1.2. Even with a full wipe and all the usual safety precautions it just stuck on bootloop forever and wouldn't let me in. I chalked it up as that's what I get for being the guy that's never satisfied with stock. I was unable to get my nexus7 fixed. I sent you a suggestion on pm though.
Never mind everyone. Thank you so much for your help.
I tried install the nexus 7's driver on another computer and it recognized my device in bootloader mode, and restore everything back to stock now. Thank you so much!!!!
Mine did that to the first time I tried. After I got it to work, the permissions were all messed up and I could not get it to download anything off the web and I was getting a playstore error 90% of the time as well. I finally just wiped everything on my tablet, installed the stock rom via N7 toolkit, then reflashed smooth rom, and all is working now. It may have been a bug with the older version of N7 toolkit, as I updated it before I reran everything.
Hi Guys/girls
I received my nexus 7 today (its lovely!) and then proceeded to attempt to root it so I can change the dpi etc.
I unlocked the bootloader using the Nexus 7 toolkit and that worked fine.
I then went to do the one click to root/flash etc and then got stuck on downloading boot.img.
After leaving it for a few hours I gave up and the nexus booted straight back into the os.
My next attempt was to root using the su binarys via fastboot. This again failed on sending the file. I also noticed that my device is locked at fastboot mode when the usb cable is plugged in, e.g the up/down doesn't work unless I unplug the cable. I have tried different cables and a different PC!
My next step was then to use the toolkit to reset back to factory incase I had screwed something up, so this deleted the bootloader etc as it should and then froze on sending the .img across.
I now have a un responsive fastboot when usb is plugged in and no recovery or bootable tablet, any hints/solutions?
Thanks
herghost said:
Hi Guys/girls
I received my nexus 7 today (its lovely!) and then proceeded to attempt to root it so I can change the dpi etc.
I unlocked the bootloader using the Nexus 7 toolkit and that worked fine.
I then went to do the one click to root/flash etc and then got stuck on downloading boot.img.
After leaving it for a few hours I gave up and the nexus booted straight back into the os.
My next attempt was to root using the su binarys via fastboot. This again failed on sending the file. I also noticed that my device is locked at fastboot mode when the usb cable is plugged in, e.g the up/down doesn't work unless I unplug the cable. I have tried different cables and a different PC!
My next step was then to use the toolkit to reset back to factory incase I had screwed something up, so this deleted the bootloader etc as it should and then froze on sending the .img across.
I now have a un responsive fastboot when usb is plugged in and no recovery or bootable tablet, any hints/solutions?
Thanks
Click to expand...
Click to collapse
yes, actually : D
download this
http://forum.xda-developers.com/showthread.php?t=1809195
if you dont have that one.
pick your device from the list.
install the drivers for your device with device unplugged
make sure the device is fully off
plug in into the computer and hold down the power and volume buttons
windows should pop up saying nexus 7 bootloader driver successfully installed and then you can use the whole fastboot menu thing without a problem and reboot to recovery or whatever.
my suggestion is to install twrp recovery project 2.x.x.x
oh yeah, its a bug with the bootloader that it freezes when you plug the usb cable into the wall or a computer without the proper drivers
jombo2323 said:
yes, actually : D
download this
http://forum.xda-developers.com/showthread.php?t=1809195
if you dont have that one.
pick your device from the list.
install the drivers for your device with device unplugged
make sure the device is fully off
plug in into the computer and hold down the power and volume buttons
windows should pop up saying nexus 7 bootloader driver successfully installed and then you can use the whole fastboot menu thing without a problem and reboot to recovery or whatever.
my suggestion is to install twrp recovery project 2.x.x.x
oh yeah, its a bug with the bootloader that it freezes when you plug the usb cable into the wall or a computer without the proper drivers
Click to expand...
Click to collapse
Thanks for your reply, thats what I did in the first place! Removed and tried again but same issue
herghost said:
Thanks for your reply, thats what I did in the first place! Removed and tried again but same issue
Click to expand...
Click to collapse
you are 100% positive you did EXACTLY what i said?
I have no idea what went wrong
That's the problem with toolkits though. People don't know what they're doing and when something goes wrong you don't know how to fix it!! I understand where toolkits come from, but they are only useful if you know what happens in the background when you click on a button.
Thread Moved
Thread belongs in Q&A. Not the Dev Forum
Post moved.
MD
I mess with several android and other devices on my notebook..
Doing so i install drivers for them and often have the exact same issue as you are having..
Do a search for a program called usbdview.. Install to your pc..
With the nexus unplugged run the program..Delete everything in the list that you do NOT HAVE plugged into your computer..Especially anything that says ADB.. OR ANDROID..
Plug in the nexus 7 refresh the list.. and delete the entries created for it..
Unplug the nexus .. reboot the pc.. Then download or use the tool kit to install the latest Adb drivers for nexus 7 ..
reboot the pc.. then plug in the nexus ..
After doing the above see if you can now use fastboot/ adb...
The above will insure its not a driver issue.Often computers get usb devices confused and causes them to hang ..
Good Luck
erica_renee said:
I mess with several android and other devices on my notebook..
Doing so i install drivers for them and often have the exact same issue as you are having..
Do a search for a program called usbdview.. Install to your pc..
With the nexus unplugged run the program..Delete everything in the list that you do NOT HAVE plugged into your computer..Especially anything that says ADB.. OR ANDROID..
Plug in the nexus 7 refresh the list.. and delete the entries created for it..
Unplug the nexus .. reboot the pc.. Then download or use the tool kit to install the latest Adb drivers for nexus 7 ..
reboot the pc.. then plug in the nexus ..
After doing the above see if you can now use fastboot/ adb...
The above will insure its not a driver issue.Often computers get usb devices confused and causes them to hang ..
Good Luck
Click to expand...
Click to collapse
You Star
Put me on the right track, my PC was basically assuming that it was my S3, in the end I removed everything with samsung in it from the registry, uninstalled all the drivers then tried again, correctly showing as a nexus and not a samsung
I have a Google Nexus 4, bought direct from Google, I rooted it and it was working well for a while. Then the battery started draining super fast. A friend recommended resetting, so I did and it seemed to fix it for a while. Then the battery issue came up again, so I reset again, expecting the same outcome....however, I wiped the phone completely. It turns on and displays Google, and that's it.. My computer does not recognize the phone when I plug it in, and I cannot get the USB Debugging to even be an option. Every resolution I have found for this situation needs me to enable the USB Debugging mode. Is there any other way to get all the OS files back on this phone or is it bricked?
When I plug it into the PC it tells me to look up drivers, and this is how it sees my phone: Unidentified Device USB\VID_0CF3&PID_3000&REV_0200.
It isn't recognized as a phone at all. It tells me to download Atheros Drivers.
I have searched for days trying to find the solution to this. Any help would be so very appreciated by this noob
Did you try to manually delete drivers from the device manager? Ticking the option that permanently delete the driver from PC.
And after doing this...trying Windows Update for driver installation?
PS: also try to manually flash with Fastboot all the latest Factory Image from Google....
Sent from my Nexus 4 using Tapatalk 4 Beta
thesebastian said:
Did you try to manually delete drivers from the device manager? Ticking the option that permanently delete the driver from PC.
And after doing this...trying Windows Update for driver installation?
PS: also try to manually flash with Fastboot all the latest Factory Image from Google....
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yes, I've done that, there are currently no drivers on my PC. When the phone is plugged into the PC, it tells me to find drivers because it is an unrecognized device.
MrsWhitey said:
I have a Google Nexus 4, bought direct from Google, I rooted it and it was working well for a while. Then the battery started draining super fast. A friend recommended resetting, so I did and it seemed to fix it for a while. Then the battery issue came up again, so I reset again, expecting the same outcome....however, I wiped the phone completely. It turns on and displays Google, and that's it.. My computer does not recognize the phone when I plug it in, and I cannot get the USB Debugging to even be an option. Every resolution I have found for this situation needs me to enable the USB Debugging mode. Is there any other way to get all the OS files back on this phone or is it bricked?
I have searched for days trying to find the solution to this. Any help would be so very appreciated by this noob
Click to expand...
Click to collapse
Hold volume up/down and power until it reboots into boot loader mode. Download the factory images from the Google website (search nexus stock images on Google) and plug your phone into the computer and use fastboot to flash the OS back.
Rember, as long as you can get the phone to turn on you can fix whatever other issue your having providing its software related.
To fastboot flash,
You need the android SDK, use Google to figure out how to install it but its not hard.
Run the flash-all bat found in the archive file you downloaded, or manullay flash each partition like this.
fastboot flash [partition] [.IMG name]
Sent from my Nexus 4 @1.944 GHz on Stock 4.2.2
IRX120 said:
Hold volume up/down and power until it reboots into boot loader mode. Download the factory images from the Google website (search nexus stock images on Google) and plug your phone into the computer and use fastboot to flash the OS back.
Rember, as long as you can get the phone to turn on you can fix whatever other issue your having providing its software related.
To fastboot flash,
You need the android SDK, use Google to figure out how to install it but its not hard.
Run the flash-all bat found in the archive file you downloaded, or manullay flash each partition like this.
fastboot flash [partition] [.IMG name]
Sent from my Nexus 4 @1.944 GHz on Stock 4.2.2
Click to expand...
Click to collapse
I am having trouble getting the phone to accept anything from the PC...
MrsWhitey said:
I am having trouble getting the phone to accept anything from the PC...
Click to expand...
Click to collapse
Download the toolkit and install the drivers
Sent from my Nexus 4 @1.944 GHz on Stock 4.2.2
yea download Google Nexus 4 ToolKit install drivers then you can factory restore using the toolkit to restore
i think i chose option 9 and it downloaded the need restore image
Tried it all
I have tried all those ideas and all have failed. I can never get the computer to see my device. All it says is unknown device. When I click update drivers and direct it to the sdk driver I download it still gives me no connection through fastboot or adb. I have tried selecting various general Android drivers through the update drivers screen, Found some from Google Inc. that specify Nexus 4 bootloader interface and adb interface. Nothing is working. I think I need to have a working Nexus 4 to install to correct drivers first and then I might be able to piggy back off those and use my phone to flash through fastboot or push adb. I have worked with both command lines with reasonable success before rooting samsung tablets and phones and htc's. I am familiar with the process and have read numerous ideas none of which seem to work in this case. Made it all the way to Google search page 12. Anyone know a way to force install the Nexus 4 drivers without having a working phone present? I am thinking I just need to go buy a new one and return it after I plug it in to install drivers. Don't want to have to pay the re-stock fee though. Any other ideas are very welcome.
And I have tried to use the toolkit as well and it does nothing either. I have the stock rom ready to go just need a way to get it onto the phone.
Hi,
I tried a lot of other rooting applications and have had no luck with any of them. Then I found Wug's Nexus Root Toolkit. It works for my Nexus 4 (Jelly Bean 4.3) - until I came to the "Full Driver Configuration Guide" - where it gives a message: "ADB device was not found".
I have tried it over several times to no avail. Can anyone offer any clues as to what may be causing this?
btw, I am running the Wug's Nexus Root Toolkit v1.7.2 on Windows 8.
Thank you,
David
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
aaronwebstey said:
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
Click to expand...
Click to collapse
I am having the same problem. Where/how does the phone ask you to confirm USB debugging? It asks me when I turn it on, but not again later.
I have tried 3 or 4 different drivers, but, although the device is recognised by Windows 8, it is not recognised by Root Toolkit.
.... toolkits are the the devil...
They promote not learning what you're doing or what's actually happening in your devices so... there's posts like this.
please read this thread before touching your device
studacris said:
.... toolkits are the the devil...
They promote not learning what you're doing or what's actually happening in your devices so... there's posts like this.
please read this thread before touching your device
Click to expand...
Click to collapse
I'm not quite sure how this was supposed to help. My problem is that the ADB drivers do not seem to work on my computer. I have just tried installing the Android SDK (which comes with its own ADB drivers), having first uninstalled all the existing drivers. It did not help.
Not entirely sure where to go from here.
PDAnet's drivers may work. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
studacris said:
PDAnet's drivers may work. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
Click to expand...
Click to collapse
I had installed PDANet from within Root Toolkit, and it didn't work. Just now, I uninstalled everything again, and installed PDANet from their web site. Still get no ADB device in Root Toolkit. [NB I didn't have PDANet on the phone, but it seems to be there now]
I tried running adb from the android SDK, and it says "error: device not found".
However, I noted there was an adb prompt on the phone when I first plugged it in, this time (which I told to always accept).
[Later]
Wierd - it is now a bit further on. This is what I did:
Started PDANet on the phone, and enabled USB tethering.
Started PDANet on the computer, and it connected to the phone. At this point the USB debugging permission thing came up again, and I accepted it (also ticking the box to always accept).
Unticked USB tethering on the phone again.
Stopped PDANet on the computer (right click on icon, exit).
Tried the Root Toolkit again (pressed Root button), it connected to the device, and put it into fastboot mode.
The boot loader appeared on the phone, and the computer said "Checking Fastboot Status".
It seemed to stay like that for ever.
Killed the root toolkit. and tried again.
Left the computer for a while, and when I came back, it had completed.
So, it seems to be working now.
And when you try using fastboot directly instead of the toolkit....... what happens?
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
studacris said:
And when you try using fastboot directly instead of the toolkit....... what happens?
Click to expand...
Click to collapse
I type "fastboot reboot" at the command prompt.
It replies "< waiting for device >"
I wait a few minutes.
Then I press ^C and the command prompt returns.
P.S. Changing the USB connection to camera doesn't make any difference to the above.
Best idea i didnt notice too
aaronwebstey said:
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
Click to expand...
Click to collapse
Thanx !!!!!!!
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
Click to expand...
Click to collapse
Thank you so much! This solved it for me :good:
nikkilocke said:
I type "fastboot reboot" at the command prompt.
It replies "< waiting for device >"
I wait a few minutes.
Then I press ^C and the command prompt returns.
P.S. Changing the USB connection to camera doesn't make any difference to the above.
Click to expand...
Click to collapse
I got stuck the same way.
The way to got around was to change connection to camera -> the PC is intalling some drivers,
then turn off the USB debugging -> the PC is again installing some drivers,
then turn on the USB debugging -> "bingo" adb mode recognized by the toolkit
Now I can install and enjoy Kikat 4.4.1 :good:
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Click to expand...
Click to collapse
I found the same solution, changing over from MTP to CAMERA suddenly had the toolkit recognise the phone and could boot it to unlock then root it... Previously, I had installed PDA drivers...
I am astonished how PATHETIC nexus phones/tablets are at simply connecting to a PC. I am baffled at the attempt by google to make their devices as UN-plug & play friendly as possible... bizarre! I have a N10, N7 and have had two N5's and all have the same PITA random disability....
grrr...
Mark.
So the Nexus toolkit is able to see the Nexus 7 as a media device but not Windows ?
marcelin99 said:
I got stuck the same way.
The way to got around was to change connection to camera -> the PC is intalling some drivers,
then turn off the USB debugging -> the PC is again installing some drivers,
then turn on the USB debugging -> "bingo" adb mode recognized by the toolkit
Now I can install and enjoy Kikat 4.4.1 :good:
Click to expand...
Click to collapse
So the Nexus 7 toolkit is able to see the Nexus 7 as media device with this method, but not Windows ? That's strange because Windows is supposed to see your files within the Nexus via Mtp mode. Is it that google removed the ability for Windows to be able to see Nexus 7 files in Android kit kat 4.4.2. What should I do then if I simply want to view files inside Nexus as a non root user ? B.T.W I'm currently on stock kitkat 4.4.2 build KOT49H. Therefore, I'd gladly appreciate it if anyone out there would answer this question and thanks in advance. Feel free to PM me on this so we can "talk" about this. : )
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
Click to expand...
Click to collapse
Success.
Well, mtp connection works perfectly fine in my Windows 7 machine. But on my xp machine I could never get it to work no matter what driver combination I used.
I can see the reason they changed to mtp but I found mass storage to be much more user friendly.
Sent from my Nexus 4 using XDA Free mobile app
as others, I was using WUG kit to get back to stock. I was stuck without USB degugging options. Installing PDAnet did the trick, installing drivers so that I was able to get WUG working. I am now stock. All traces on my tinkering are gone. Later this week I will upgrade to a Galaxy Mega and trade in my Galaxy Nexus that I have loved for 3 plus years.
Stuck on fastboot screen
GranPaSmurf said:
as others, I was using WUG kit to get back to stock. I was stuck without USB degugging options. Installing PDAnet did the trick, installing drivers so that I was able to get WUG working. I am now stock. All traces on my tinkering are gone. Later this week I will upgrade to a Galaxy Mega and trade in my Galaxy Nexus that I have loved for 3 plus years.
Click to expand...
Click to collapse
Hi
Happy New Year to all! unfortunately I am left with the unusable nexus 7 that happened last night.
I was going crazy with the lags with lollipop and was waiting for the 5.0.5 update OTA but the delay was making me go crazy so I decided to take the risk of manually flashing the image using ADB and SDK.
Like many others pointed, I knew how to enable my computer to see my device by switching from MTP to PTP mode from my earlier rooting experience with Samsung, HTC and others. So that was not an issue for me.
I was following a tutorial from androidcentral and half way through I went to check a tutorial on youtube which I think caused the disaster. After I executed the adb devices no devices were detected and like I said I went and changed the MTP mode to off and bingo now my device was detected.
I executed device unlock and currently my device is in unlocked bootloaded state which is displayed in the fastboot screen where I am stuck now. Following the youtube instead of flashing each separately bootloader first and then the factory image I jumped to 'flash-all.bat' command...I saw something say on my command prompt on pc that completed in so many seconds or minutes which led me to get anxious and since no rebooting happened on the device I went and manually tried to press the power button.
From that time I am stuck on the fastboot screen. I can cycle through 'power off', restart booloader, recovery mode and start. But when I select 'restart bootloader' it comes to 'start' in the same mode and when I select that I can see a tiny 'Booting failed' in white letters in tiny fonts on the top left side of the 'Start'. I cannot go past this state.
Since I know the last time I had enabled 'usb debugging' and MTP off before everything went wrong I am presuming those states are still intact. I can see status on 'reboot bootloader' screen that my bootloader is unlocked.
Now, when I try to go through the process again my device is seen in device manager but when I send 'adb devices' command it cannot detect any devices. If my device is usable I can atleast go into settings to see if my MTP state and usb debugging status. Now I don't have that option. I even tried the Nexus Root Toolkit - everything is fine but until it tests the driver to finally say 'ADB device not found'.
After browsing so many posts I spotted there were some posts that said there is some discrepancy between the device id as listed by the driver to what actually is usb.inf, which all is too technical and overboard for me. And finally left me thinking that it is some issue of Windows PC as someone pointed that the ADB device was detected on a MAC. So I am now thinking to give it a shot in a mac machine as a final attempt to recover my device.
Anyone please suggest a solution, apologies if this is covered by someone elsewhere in the forum if so please point me there. I will make sure that from next time I will never do a manual flash of factory image.
please help!
It sounds like you are on top of it, but haven't hit the right combination yet. Thanks for the quote and I am sorry I am unable to offer any help. As mentioned in my post, I have switched to the Galaxy Mega and was pleasantly surprised by the OTA upgrade to 4.4. Now I am trying to figure out how to root it.
Hi everyone !
I got a tricky situation there and I need some help. (I googled a lot before posting this.)
Few day ago I tried to root my Nexus 4 using Nexus Root Toolkit.
I'm going to explain step by step what happend :
1. My phone was on Android 4.3 stock rom and I unlocked it with NRT.
2. I did all updates from OTA to get Android 4.4.
3. Then I’ve made a HUGE MISTAKE because I've rooted my phone with the wrong modele selection in NRT. (Android 4.3 was still selected, but my phone was actually in Android 4.4).
4. While rooting, "everything was fine" exept that I’ve got a black screen just after the “Bootloader” and then nothing happend.
5. I’ve restarted my phone manually, by pressing the Power button 5 seconds. It worked, my phone actually booted but it was normal/not rooted.
Since that, ADB doesn’t work anymore on my phone.
ADB was fully functionnal before and I think I have soft-bricked something in my phone.
The problem is not my computer because :
- Yes, ADB is enabled on my phone and I tried unplug/plug USB many times. (doesn’t work)
- I've tried other USB port. (doesn’t work)
- I've tried drivers reinstallation on my computer, and restarting it many times. (doesn’t work)
- I've tried my phone on differents computers (doesn’t work)
Details :
- The “Stock ROM + Unroot” option on Nexus Root Toolkit worked (throught Bootloader mode) but ADB sill doesn’t work.
- I've tried to launch a custom recovery from Nexus Root Toolkit using Fastboot mode but I also get a black screen.
- In the stock recovery mode, the option “Apply update from adb” seems to work. (The drivers test of Nexus Root Toolkit pass, but I need to restart my phone manually to get to the Bootloader mode test.)
Any idea what I can try now ?
Lefjojo said:
Hi everyone !
I got a tricky situation there and I need some help. (I googled a lot before posting this.)
Few day ago I tried to root my Nexus 4 using Nexus Root Toolkit.
I'm going to explain step by step what happend :
1. My phone was on Android 4.3 stock rom and I unlocked it with NRT.
2. I did all updates from OTA to get Android 4.4.
3. Then I’ve made a HUGE MISTAKE because I've rooted my phone with the wrong modele selection in NRT. (Android 4.3 was still selected, but my phone was actually in Android 4.4).
4. While rooting, "everything was fine" exept that I’ve got a black screen just after the “Bootloader” and then nothing happend.
5. I’ve restarted my phone manually, by pressing the Power button 5 seconds. It worked, my phone actually booted but it was normal/not rooted.
Since that, ADB doesn’t work anymore on my phone.
ADB was fully functionnal before and I think I have soft-bricked something in my phone.
The problem is not my computer because :
- Yes, ADB is enabled on my phone and I tried unplug/plug USB many times. (doesn’t work)
- I've tried other USB port. (doesn’t work)
- I've tried drivers reinstallation on my computer, and restarting it many times. (doesn’t work)
- I've tried my phone on differents computers (doesn’t work)
Details :
- The “Stock ROM + Unroot” option on Nexus Root Toolkit worked (throught Bootloader mode) but ADB sill doesn’t work.
- I've tried to launch a custom recovery from Nexus Root Toolkit using Fastboot mode but I also get a black screen.
- In the stock recovery mode, the option “Apply update from adb” seems to work. (The drivers test of Nexus Root Toolkit pass, but I need to restart my phone manually to get to the Bootloader mode test.)
Any idea what I can try now ?
Click to expand...
Click to collapse
I foresee a total wipe in your future. First try uninstalling all the Android drivers in the Device Manager, turn off debugging on the phone, plug the phone in, and see what happens.
Sent with my Nexus® 10 minus 3
Berrydroidcafe said:
I foresee a total wipe in your future. First try uninstalling all the Android drivers in the Device Manager, turn off debugging on the phone, plug the phone in, and see what happens.
Sent with my Nexus® 10 minus 3
Click to expand...
Click to collapse
Hey ! Thanks for your repy
I tried what you told me, I uninstalled everything related to Android drivers on my computer in Device Manager and with USBDeview. I also uninstalled "Universal ADB Driver" and I restarted my computer.
I pluged my phone back in without USB Debugging and Windows reinstalled every drivers itself.
Everything worked fine, so I've installed "Universal ADB Driver" from NRT, and follow it instructions.
Then I've enabled USD Debugging, I unpluged and pluged back my phone and tried the drivers test.
But ADB still doesn't work...
Windows detect my phone, but my phone doesn't dectect my computer (it doesn't ask me if I want to accept this computer as it should do.).
yo,ve tried to reinstall NRT and to redownload the android sdk
uninstall NRT using iObit Uninstaller (it will totally delete any NRT file from HDD)
after uninstalling it wirh iObit Uninstaller shift delete on android sdk folder
restart
and now download the Android SDK 32bit (even if you have 64bit os download 32bit version is totaaly stable and compatible with the drivers)
open android SDK and install google driver
then install NRT
another thing to do is to change the usb port (allways to be an USB2 port and use the cable that camed with the phone
GOODLUCK
Try to get into fastboot power+volumes then go into toolkit on root and all should be fine
Gesendet von meinem Nexus 4 mit Tapatalk