I put my Canvas knight a350 into recovery mode and wipe dalvik cache, factory reset and format system.
after that phone got stuck at boot logo for 30-35 minutes i tried restarting but no success.
Now the phone does not even start and neither it get recognised via usb cable so no luck in flash tools. Can anyone help me to get the device working somehow
i have unbricked it successfully
Moderators can delete this thread
Please can you explain how you unbricked ...??
Download canvas knight stock rom
Use sp flash tools for installing this rom
Whilr connecting mobile via usb press volume button dont release it until the process begins in sp tools
Sent from my A210 using XDA Free mobile app
harvir46 said:
I put my Canvas knight a350 into recovery mode and wipe dalvik cache, factory reset and format system.
after that phone got stuck at boot logo for 30-35 minutes i tried restarting but no success.
Now the phone does not even start and neither it get recognised via usb cable so no luck in flash tools. Can anyone help me to get the device working somehow
Click to expand...
Click to collapse
bad idea formatting system. you'll need to get the complete stock backup then flash system.img using SP flash tool
@Hovatek i solved the problem....but thanks for your reply
Fixing boot loop/soft brick
shahboom said:
Please can you explain how you unbricked ...??
Click to expand...
Click to collapse
Just download Sp flash tool stock firmware and use this video by Mee
https://youtu.be/0-bd9tSlr-8
Related
Hello guys, it doesn't matter which rom i install on my phone, it says installed success but then boot into ClockWorkMod again.
What i'm doing wrong?
My phone is ZTE v880 made in china
I tried to flash using TPT method but then phone but on FTM mode.
But when i connect the phone to the USB, pc does not recognize it on the FTM mode, can i get back my phone or it is bricked forever?
Kindest regards
thomasgm said:
Hello guys, it doesn't matter which rom i install on my phone, it says installed success but then boot into ClockWorkMod again.
What i'm doing wrong?
My phone is ZTE v880 made in china
I tried to flash using TPT method but then phone but on FTM mode.
But when i connect the phone to the USB, pc does not recognize it on the FTM mode, can i get back my phone or it is bricked forever?
Kindest regards
Click to expand...
Click to collapse
helped me a lot
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Yes i followed the steps, problem is that when it boot at FTM mode it is not reconized by pc.
DO you have any other methods?
Did you look at the Special Case: corrupt NV memory in that link it seems to describe your problem and in CWM did u wipe the data , cache before flashing the rom ??
pratul_n said:
Did you look at the Special Case: corrupt NV memory in that link it seems to describe your problem and in CWM did u wipe the data , cache before flashing the rom ??
Click to expand...
Click to collapse
yes, the only problem is that i can't enter into FTM mode =(
Not sure how to proceed now, i think this phone is lost.
[Q] TCL Idol X S950 Bootloop - Recovery can't mount internal storage "sdcard"
I have installed S4 themed ROM for s950 but after i did the wipe and at reboot appeared a notification "can't read sd card....format?" so i returned to recovery but says "e:can't mount cache\.." "e:can't open.." etc etc.
can someone help me?
PS. Sorry for my bad english
I have the exact same problem, did you found a solution?
bootloop
Hi guys, i have the same problem.After using TCL upgrade tool my device kept rebooting after the manufacturer logo was showing up.At first i could get into CWM recovery i tied everything from fixing permissions to wiping cache , dalvik etc. Then i tried to reflash CWM using sp flash tool
and now i cant even get into recovery. After that i tired with adb-fastboot but my device doesn't get recognized by adb.Its weird cause when i have the device plugged into powersource the device starts rebooting , and when i have it unplugged does nothing even i i press power button.
Anybody has an idea of what the problem might be?
Thanks in advance
errikozz said:
Hi guys, i have the same problem.After using TCL upgrade tool my device kept rebooting after the manufacturer logo was showing up.At first i could get into CWM recovery i tied everything from fixing permissions to wiping cache , dalvik etc. Then i tried to reflash CWM using sp flash tool
and now i cant even get into recovery. After that i tired with adb-fastboot but my device doesn't get recognized by adb.Its weird cause when i have the device plugged into powersource the device starts rebooting , and when i have it unplugged does nothing even i i press power button.
Anybody has an idea of what the problem might be?
Thanks in advance
Click to expand...
Click to collapse
If you have backup, try to flash it via sp flash tool. From sp flash tool format phone, and then flash everything checked, with original preloader. I had similar problem and that solved it.
If you don't have original backup, do not format phone from sp flash tool. Instead, try flashing official rom 4.4.2 (search on forum) and do as described. Just do not flash recovery from that rom. Download philz touch recovery (on same thread you have link), replace and flash. Conect phone, click Download on sp flash tool and press and hold power button until phone restarts.
Put_Nick said:
If you have backup, try to flash it via sp flash tool. From sp flash tool format phone, and then flash everything checked, with original preloader. I had similar problem and that solved it.
If you don't have original backup, do not format phone from sp flash tool. Instead, try flashing official rom 4.4.2 (search on forum) and do as described. Just do not flash recovery from that rom. Download philz touch recovery (on same thread you have link), replace and flash. Conect phone, click Download on sp flash tool and press and hold power button until phone restarts.
Click to expand...
Click to collapse
Thanks man , i flashed 4.4.2 and philz touch and the only diference now is that i can turn on the phone when is not connected to the power adapter.
im trying to enter recovery but still nothing ...
Hi,
I have a problem with my i9301i Galaxy S3 Neo...
After buying it (second hand) it has always slow boot up (3-4 min only on this screen: http://imgur.com/P6GYIWm )
I tried to go to Recovery Mode and do Factory Reset and Wipe Cache, but not helped.
In Recovery Mode ,I got this errors: http://imgur.com/e6Jpx6Z
Is this ok?
Any solutions?
Thank you.
TheNerko.
try to reflash stock rom
Sent from my GT-I9301I using xda premium
TheNerko said:
Hi,
I have a problem with my i9301i Galaxy S3 Neo...
After buying it (second hand) it has always slow boot up (3-4 min only on this screen: http://imgur.com/P6GYIWm )
I tried to go to Recovery Mode and do Factory Reset and Wipe Cache, but not helped.
In Recovery Mode ,I got this errors: http://imgur.com/e6Jpx6Z
Is this ok?
Any solutions?
Thank you.
TheNerko.
Click to expand...
Click to collapse
Try Emergency firmware recovery via kies or flash the stock rom via Odin
Flashed Stock Firmware ,downloaded from http://www.sammobile.com/firmwares .
Now, a little bit better situation ,maybe 2 minutes need to start from first screen....
When we look at this video, it need to be 5-7 secs https://youtu.be/bMZPJopaeZY?t=1m
My micromax mobile hangs on the boot logo...how to know whether it is hard brick or soft brick??
vineetxd said:
My micromax mobile hangs on the boot logo...how to know whether it is hard brick or soft brick??
Click to expand...
Click to collapse
Since ur getting the the boot logo it is soft bricked only try to restore the nandroid backup via CWM or TWRP recovery if you have or flash the stock ROM if possible
Press Thanks button if i helped you
Anyway flash a custom recovery and make a backup of everything in case of something goes wrong. I recommend TWRP because you can use it while phone is connected to pc.
Ok..I will flash TWRP, but today I after sucessful boot, on screen appeared red message: "Factory Mode Is ON....", I haven't see whole message, because phone hide message.
I flashed it and phone is dead = Bricked....
EDIT: Not Bricked, it need 15 minutes to start booting!!
How to fix it?
Hello all,
I have an LG G2 - D802 with CM-12.1 and TWRP as Recovery partition.
After the phone has undergone several software and one hardware bricks, I suppose there is something wrong with the phone's partitions because I cannot access the Recovery partition or the Download Mode when booting by using the key combination.
I found out by trying to do a clean flash of CM13 on the phone via TWRP and External memory via Mini USB - USB Memory stick and when I have deleted all partitions including the Internal Storage, System, Data, Cache & Dalvik Cache, I tried to flash the CM13+GoogleApps but then I have booted the phone I could see only the LG logo for a few seconds and then a black - on screen.
When I plugged the phone on my PC I could see a lot of partitions and I have followed a guide I found in the forum to unbrick. Then miraculously the phone had booted into the TWRP recovery without pressing any key combination. After that, I have restored to my precious backup.
Specifically then I'm trying to boot to Download Mode (to flash the Official LG Firmware and unroot), I turn the phone off, I press the Volume Up + Power, then when I see the LG logo I unpress and press the Power button but the phone keeps booting to my CM12.1 OS.
The same occurs when I 'm trying to boot to the Recovery parition (TWRP), however I can boot there via the CM's advanced reboot menu.
The reason I wanted to flash the Official Firmware and unroot is because I thought it will bring the Recovery and Download mode back..
How can I flash the correct images for the Download Mode and Recovery mode on the phone?
Also should I leave the Internal Storage intact instead of formatting via TWRP before I flash the new CM13?
thanks,
Stefanos Constantinou
S.Constantinou said:
Hello all,
I have an LG G2 - D802 with CM-12.1 and TWRP as Recovery partition.
After the phone has undergone several software and one hardware bricks, I suppose there is something wrong with the phone's partitions because I cannot access the Recovery partition or the Download Mode when booting by using the key combination.
I found out by trying to do a clean flash of CM13 on the phone via TWRP and External memory via Mini USB - USB Memory stick and when I have deleted all partitions including the Internal Storage, System, Data, Cache & Dalvik Cache, I tried to flash the CM13+GoogleApps but then I have booted the phone I could see only the LG logo for a few seconds and then a black - on screen.
When I plugged the phone on my PC I could see a lot of partitions and I have followed a guide I found in the forum to unbrick. Then miraculously the phone had booted into the TWRP recovery without pressing any key combination. After that, I have restored to my precious backup.
Specifically then I'm trying to boot to Download Mode (to flash the Official LG Firmware and unroot), I turn the phone off, I press the Volume Up + Power, then when I see the LG logo I unpress and press the Power button but the phone keeps booting to my CM12.1 OS.
The same occurs when I 'm trying to boot to the Recovery parition (TWRP), however I can boot there via the CM's advanced reboot menu.
The reason I wanted to flash the Official Firmware and unroot is because I thought it will bring the Recovery and Download mode back..
How can I flash the correct images for the Download Mode and Recovery mode on the phone?
Also should I leave the Internal Storage intact instead of formatting via TWRP before I flash the new CM13?
thanks,
Stefanos Constantinou
Click to expand...
Click to collapse
have you tried quick reboot app.?
if its missing you can try skr tools. if not then you must go back to stock..
raptorddd said:
have you tried quick reboot app.?
if its missing you can try skr tools. if not then you must go back to stock..
Click to expand...
Click to collapse
hi,
thanks for replying..
the quick reboot app can boot into Download Mode only for Samsung devices and do you mean SRK tool?
that's how I have unbricked my phone the other day when it showed all those partitions when I got it bricked..
so how can I use it to reflash the download mode and make the combination work?
also how can I go back to stock if I cannot enter the download mode?
and will the partitions be created if I'm using the download mode to flash the stock firmware?
S.Constantinou said:
hi,
thanks for replying..
the quick reboot app can boot into Download Mode only for Samsung devices and do you mean SRK tool?
that's how I have unbricked my phone the other day when it showed all those partitions when I got it bricked..
so how can I use it to reflash the download mode and make the combination work?
also how can I go back to stock if I cannot enter the download mode?
and will the partitions be created if I'm using the download mode to flash the stock firmware?
Click to expand...
Click to collapse
I use quick reboot to boot into recovery....
yes srktools
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
not sure how but it has nuke download so it can enter download mode.
i think when using flash tools it wipes everything and installs everything needed..
so you must try the srk nuke download. i have no idea how to use. i only know you can try that or.. a search for a way to get download mode...if you get error 9006 i think then you need to short circuit the motherboard to get download mode..
raptorddd said:
I use quick reboot to boot into recovery....
yes srktools
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
not sure how but it has nuke download so it can enter download mode.
i think when using flash tools it wipes everything and installs everything needed..
so you must try the srk nuke download. i have no idea how to use. i only know you can try that or.. a search for a way to get download mode...if you get error 9006 i think then you need to short circuit the motherboard to get download mode..
Click to expand...
Click to collapse
I have been there my friend, that was my Hardware Brick; I had a black screen and I had to short the circuit to get all those partitions back, then I could see all the partitions and reflash all the img via Linux.
Maybe I will try the SRK tool..
S.Constantinoue bro how did u shortcircuit ur motherboard ? i have the same issue.. i donno the procedure to shortcircuit.. would u let me know the procedure for it..
Sent from my SM-N910C using XDA-Developers mobile app
mriyaan said:
S.Constantinoue bro how did u shortcircuit ur motherboard ? i have the same issue.. i donno the procedure to shortcircuit.. would u let me know the procedure for it..
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
mriyaan said:
S.Constantinoue bro how did u shortcircuit ur motherboard ? i have the same issue.. i donno the procedure to shortcircuit.. would u let me know the procedure for it..
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
raptorddd said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
hello guys, I have used the URL raptorddd has posted!
also I have posted a reply with screenshots I have made during the procedure:
there is my reply post :
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404/post58490267#post58490267
have a look at this video https://www.youtube.com/watch?v=8ZD98phYTsM and this one https://www.youtube.com/watch?v=8ZD98phYTsM
but I have shorted the part on the motherboard the guide shows and not the one in the videos
I installed stock rom using sp flash tool provided with stock rom but my phone get stuck at micromax logo and keeps restarting.
and even after selecting recovery mode or factory mode it reacts same again restarts.
anybody can help me???
Thank you
YO
NSector said:
I installed stock rom using sp flash tool provided with stock rom but my phone get stuck at micromax logo and keeps restarting.
and even after selecting recovery mode or factory mode it reacts same again restarts.
anybody can help me???
Thank you
Click to expand...
Click to collapse
strange,if the flashing completed then device should boot.
Try visiting our knight's blog and downloading stock v3 from there it will work for sure!
www.canvasknightroms.blogspot.in
Regards,
Mr.Ak