Database Users

help bootloop!!!

after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!

rimoragl said:
after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!
Click to expand...
Click to collapse
This thread is gonna get moved to Q&A, but, before it does...
First, try to boot into recovery and wipe cache and dalvik cache. If that doesn't work, you're probably going to need to flash a stock firmware via Mobile ODIN or the PC version of ODIN.
See the stickied thread with official firmwares in this section, then search XDA for how to flash via ODIN (I highly recommend Mobile ODIN). That should do the trick.
Steve

i have make all wipe but not change.i have flashed with odin 1.85 the stock firmware but is the same!

tell us a bit more detail how u flash and what u flash via odin

i have flashed the firmware P6800XXLA3 CSC ATO.with odin 1.85.but remainig in bootloop

Assuming that your download mode is fine
Can you enter recovery mode? What recovery. Stock or CWM?
If yes.. Your cache and dalvik need to be clean up..
When flashing with odin, Dont check repartition or use pit files, you dont need it except you know what to do..

I advise you to flash your machine with the following firmware ..... (see photo)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks,but when i try to download the firmware the link dont work:bad gateway.there is another link.

i have the link and i have flashed the P6800ZSLA2 EGY with odin 1.85 but is the same remaining in bootloop.after i have make the full wipe.

please i am very preoccupied,the problem is in the boot.

Thread Moved To General​
This is a development section, its not for questions. Please post in the correct section, and refer to the read before posting sticky for guidelines​

Install cwm recovery and download custom ROM from this thread http://forum.xda-developers.com/showthread.php?t=1520888
Move your zip file to sdcard / external sd card, and install from recovery,.. Tell me what happen after you done..

I did but not change!!!I 'never happened!this is not a BRICK.What you can 'do?
thanks

Have you done the Samsung stock recovery 3e data wipe/factory reset
And then reflash your stock firmware.
CWM data wipe or format is not good enough.
you might have to remove external sd card if 3e recovery goes to 'manual mode'.

i did exactly,but is the always the same:bootloop!!!is possible there is a virus?is possible to flash a firmware with Odin,with Bootloader and Pit?

excusme but i dont undestended the 3e recovery how i install.

my rooted GT7.7 with CWM also experience similar problem.
It stuck in the "Samsung Galaxy Tab 7.7" screen for around 5 mins and go into animation then growing "SAMSUNG" logo for another 5 mins.
Then finally it boot up normally. 8'(

How to Unbrick Samsung Galaxy S4?

Hello
I'll cut to the chase already because I'm desperate, I bought a galaxy s4 yesterday and hated the rom that came with it, I decided to return the root and rom rom by google.
I followed this tutorial, my s4 is the GT-I9505 4G purchased at VIVO (and modified by vivo too)
I used this rom: https://mega.co.nz/#!Ug5H3ByL!Q6K1Ig41xsFAL5GS79SZVzR2rR8iNPSsR1CYodf7oog
I got here: http://forum.xda-developers.com/showthread.php?t=2348272
At 10:40 of the video you can see that soon changes the logo s4 to the boot animation, I waited 30 minutes and nothing happened here, his is in seconds.
I read that-2.6.0.0 TWRP Recovery Mode could have caused the bootloop
I switched to TWRP 2.6.0.0-a modified version (one that I found to download) the-TWRP 2.5.0.2
I did wipes straights and choked install, over 16 minutes and nothing happened.
not sure anymore if I'm with bootloop or not, I saw a video of him and the screen flashes and lights, my stays on, so leave more than 30 minutes even?I left a few hours while sleeping (or at least tried) and continued at the boot
I can not access the phone by pc, how will a new rom on it?I installed the drivers that were recommended
Help me guys :crying:
and sorry for the horrible english, I'm translating the messages!
EDIT:
When I mount the sd recovery mode by:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t

Obagleyfreer said:
Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t
Click to expand...
Click to collapse
can you give me the link to download the CWM version for my S4?

Kilowog01 said:
can you give me the link to download the CWM version for my S4?
Click to expand...
Click to collapse
Here you go mate.
I would personally install Philz CWM recovery though. you can find it in S4 Original Development forum.

Obagleyfreer said:
Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t
Click to expand...
Click to collapse
which version of odin you recommend I use?how do I put this recovery mode if the file is .img?

Kilowog01 said:
which version of odin you recommend I use?how do I put this recovery mode if the file is .img?
Click to expand...
Click to collapse
Hi,
Look HERE
ODIN 3.04 works well.

S5 G900F problem. Urgent help needed please!

I've just bought a Galaxy S5 G900F. It was rooted, with Alliance rom. SE secure was showing G900T but the rest was G900F and it says this on the phone under the battery.
It didn't have a recovery on it but I was able to flash TWRP recovery.
Everything appears to be for the G900F model, but the kernel and the modem are showing the G900T which is the T-Mobile US version. When I am in download mode, it shows a product name of G900T. When I try to flash a rom or modem, it gives a fail notice in download mode which reads 'aboot'. The phone doesn't appear to be bricked, possibly soft bricked.
I really don't know what to do now. I'm struggling to even flash a stock rom. Flashing via recovery has failed, as well as via Odin on a PC.
If anyone can help, I'd be extremely grateful. I can't even try to return it in this condition.

How did you flash the recovery exactly?
Did you try performing a factory reset and wiping the cache partition before flashing?

Yes, we did that with the Skipsoft toolkit.

Grab ODIN and a stock ROM from sammobile dot com and flash it from download mode

Hi. Tried that but it failed

Can anyone suggest anything else please? Pretty desperate!

You can flash roms in different ways: Odin, Fastboot and through a custom recovery.
Did you try flashing the rom by using your TWRP recovery?
You can choose to install a zip.
Steps are found here:
http://highonandroid.com/android-roms/how-to-install-custom-rom-using-twrp-recovery-failproof-method/

Yes, tried this. To make it worse, Samsung are refusing to fix it, as it was previously rooted by the previous owner

I would try flashing a different kernel.
If that doesn't help, try unrooting and rooting with cf auto root.

@joekeee we can't mount the internal memory via recovery to send a file over

There's no rom to boot up anything with anymore. We need a link to some kernels. Would you know where?

SD card?
You can flash kernels with Odin as well.
When you say flashing the custom rom has failed, was there an error message in Odin or on the device?
What does it do after flashing, nothing, bootloop, ...?

In download mode, the error message was "aroot". Same thing in Odin "failed aboot".

SD card?
What Odin version are you using?
Does it say anything else but aboot?

On bootup, it stays on the S5 screen. Nothing else.

Going to try the SD card....

Not writing to NAND

What Odin version are you using?
For this problem some suggest v3.04 or v3.07.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

We're using 3.09. Hmm. Can we find it on xda?

N9005 Note 3 bootloop/fails boot after rolling back to Kit Kat 4.4.2

Hi,
I upgraded from a rooted (Towelroot) stock 4.4.2 firmware DXUENE4 to stock 5.0 Lollipop DXUGBOF1 using Mobile Odin Pro. The process went smoothly. However, I lost root during the upgrade. The bootloader was NOT upgraded and remained at ENE4.
I decided to roll back to 4.4.2 and used Odin 3.09 to flash the previous stock 4.42 firmware (only Auto Reboot and F Reset Time options checked and stock 4.4.2 selected as PDA in Odin) . Odin completed without any errors but the phone now cannot boot past the glowing SAMSUNG logo. It would bootloop and give a few vibrations. I can boot into the stock recovery mode or download mode using the 3-button-method.
I have tried the usual battery pull and Wiping Cache and Factory Reset from Recovery. Nothing works - the phone is still stuck at the SAMSUNG logo after bootlooping a few times. I have tried reflashing with Odin and encountered no errors and this is the puzzling part as everything indicate a successful flash (see below).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help?
Thanks.

After flashing kitkat ,, enter to recovery ,, and do :
1- wipe data factory reset
2- wipe cashe partition .

tarek.7aliem said:
After flashing kitkat ,, enter to recovery ,, and do :
1- wipe data factory reset
2- wipe cashe partition .
Click to expand...
Click to collapse
As I reported in my original post, I have done both 1. and 2. after each successful attempt at re-flashing 4.4.2. There are NO errors reported by Odin. I CAN access both recovery and download modes. But the phone just won't finish boot! It bootloops a couple of times and then gets stuck at the SAMSUNG logo!
At this point, I'm out of ideas.

are you downloaded the firmware from sammobile ?
- download odin v3.10
- in odin you will find ,,,, LOGO ... OPTION ,,, PIT
- click on option and check you are selecting (Auto reboot) and (F.reset time) only
- and it will okay be sure

tarek.7aliem said:
are you downloaded the firmware from sammobile ?
- download odin v3.10
- in odin you will find ,,,, LOGO ... OPTION ,,, PIT
- click on option and check you are selecting (Auto reboot) and (F.reset time) only
- and it will okay be sure
Click to expand...
Click to collapse
Firmware was from Sammobile. It is the same copy which I used to flash 4.4.2 last year so nothing has changed. As stated in my original post, I only checked Auto reboot and F reset time in Odin.
I'm not a newbie at flashing roms and have followed the proper steps and made the usual backups. If you read my original post, you would have noted that I have already gone through all that you suggested (and more than once) with no success.
I know that if Odin completes successfully, then a bootloop / stuck bootup is usually fixed by a battery pull and then booting into stock recovery, followed by wiping cache and a factory reset. However, having done all the above, the phone is still stuck at boot. Mine is an extraordinary situation, hence my request for help from the collective.
Thanks.

I9505 went into bootloop

Hello fellow xda'ers!
I need your help. A friend of mine gave me his Galaxy S4 GT-I9505 after out of nowhere it didn't boot up and got stuck during boot (after couple of seconds it vibrates and restarts, stuck on the white S4 screen).
I tried reflashing it with Odin3 v3.11.1 (with Windows Defender/Firewall turned off, run as admin, orig. Samsung USB cable, direct USB port, no hubs). I flashed I9505XXUHOA7_OXAHOA7 (firmware found here http://forum.xda-developers.com/showthread.php?t=2265477), but the same problem persists. Then tried flashing I9505XXUHOJ2_I9505OXAHOJ2_I9505XXUHOJ2_HOME.tar.md5 from sammobile (it contains 5 files: AP, BL, CSC, CP and the .pit). Still same. At this point it gets messy. I wanted to flash the GPE .zip (put on SD card) through recovery so i installed latest TWRP 3.0.2. That was fine because i could enter the recovery. Before that i thought "hey, let's update bootloader and modem first", so i did flash I9505XXUHPF4 from http://forum.xda-developers.com/galaxy-s4/i9505-develop/i9505xxuhpf4-flashable-tar-odin-t3436110 via Odin (AP button).
After that i cannot enter recovery anymore. Not TWRP 3.0.2 or 3.0.1 nor latest CWM. From this onward KNOX says 0x1 in Odin/Download mode (but i don't care actually).
Tried reflashing the stock firmwares i have, with and without "Nand Erase All" or "Re-partition" in Odin in any combination. Still nothing...though Odin says PASS (see attachment)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope someone can assist me in fixing this device, i would appreciate it VERY much.
Good day xda,
ob-bob

Isn't the bootloader flashed in BL and modem in CP? You flashed both in AP?

audit13 said:
Isn't the bootloader flashed in BL and modem in CP? You flashed both in AP?
Click to expand...
Click to collapse
I think he flashed non-Kies (now Smart Switch) firmware, which has everything (bootloader, firmware, modem, CSC, kernel) inside one signed tarball.
Sent from my ASUS_Z00A using XDA Labs

krasCGQ said:
I think he flashed non-Kies (now Smart Switch) firmware, which has everything (bootloader, firmware, modem, CSC, kernel) inside one signed tarball.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
Yes, this is true. But none method works. And there is still the problem with the non-accessible recovery (also flashed via AP).
Sent from my Nexus 5 CAF using Tapatalk