Related
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Here too
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
Yep, I can´t re-root it again it seems the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar its not working for the i9500XXUEMJ8 versión, well time to wait to an updated CF-Auto Root :crying::crying::crying:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
The rooting worked so far for me. Have you enabled KNOX? They enhanced the security features and as far as I heard KNOX-enabled devices can't get full root. Verify whether it is enabled or not. I'm not sure whether the user enables it or not but that may be the reason. I'm also not sure whether this KNOX security really affects I9500 models. I9505 models are definitely affected.
jujuburi said:
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
Click to expand...
Click to collapse
Probably I never full wiped.
The apps and all other data is retained (normally all is retained when we update rom via odin).
Factory reset (full wipe) was never required earlier to get root to work.
Knox is not on from my side though I get some notifications always that some app tried to access something and Knox blocked that. But I guess that is something else because we need to manually activate Knox after opening the Knox app.
Sent from my GT-I9500 using xda app-developers app
kci83 said:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Click to expand...
Click to collapse
It did worked for me too but only at times.
When I updated rom switcher app, root was gone and it never happened again!
Sent from my GT-I9500 using xda app-developers app
anyone with any solution for this?
anyone with any solution for this?
Solved!
Sent from my GT-I9500 using xda app-developers app
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
resitm said:
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Click to expand...
Click to collapse
avineshwar said:
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
Click to expand...
Click to collapse
Thank you. Will this trip the knox thing?
After using CF-AUto root you need to update Super SU App on first boot.
Then Open SuperSU app and choose to install SU Binary without using a custom recovery.
Then reboot.
Then install Titanium backup pro and use it to free all Knox related files.
There are 7 of them and you need to remove all of them.
Remember you need to install a custom recovery to install busybox. (atleast in my case)
Install http://forum.xda-developers.com/showthread.php?t=2489234 via ODIN.
Once you are on custom recovery.
Use busybox installer to install busybox.
reboot.
You are done.
resitm said:
Thank you. Will this trip the knox thing?
Click to expand...
Click to collapse
No mate.
Wait for a future update to trip that.
In the mean time, I'm trying to trip that since it isn't very difficult just lazy to try everything since everytime 1 thing fails, I need to restore the whole data and if takes much of my bandwidth.
Hope you understand.
And the device status will also remain custom.
P.S. Touchwiz UI from Samsung will hang on a later date due to some app compatibility issue (I'm not sure which app but I can tell a large set of apps and it will hang due to any one from that list) so it is preferred to shift to some other launcher on pre hand.
Sent from my GT-I9500 using xda app-developers app
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
resitm said:
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
Click to expand...
Click to collapse
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
resitm said:
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
Click to expand...
Click to collapse
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
that would be the easiest and best solution but i am worried about the knox issue, losing the warranty and also having to sell the phone later on for a lower price.
I downloaded the official OTA update. When I went to install it the phone needed to reboot and now I've been stuck looking at the Green Android screen saying Downloading... Do not turn off target!!! and in very small writing could not do normal boot, Odin mode. I am rooted. Please help
What version is the phone? I'm reading up on things in preparation of updating myself. I'm on MF3 and for what I've read I need to Odin back to stock before updating since I'm rooted. This may not be your case figured I'd toss it out there.
brought to you by my not so sexy GS4 MF3
padgaland said:
I downloaded the official OTA update. When I went to install it the phone needed to reboot and now I've been stuck looking at the Green Android screen saying Downloading... Do not turn off target!!! and in very small writing could not do normal boot, Odin mode. I am rooted. Please help
Click to expand...
Click to collapse
Same with me. I'm stuck at the emergency firmware recovery screen. My phone was at 4.2 and it did the OTA to 4.3.3 and froze. What do I need to do to go back to stock rom?
SGH-I337 16GB.
schreiber37 said:
Same with me. I'm stuck at the emergency firmware recovery screen. My phone was at 4.2 and it did the OTA to 4.3.3 and froze. What do I need to do to go back to stock rom?
SGH-I337 16GB.
Click to expand...
Click to collapse
You i think you should use Kies to go back they actually have a feature for that. Mine won't even be recognized by the computer or anything.
I am rooted and I was running 4.3 GoldenEye v 11 rom BTW awesome ROM and Dev support best I've ever seen on xda. Any way today I installed my nandroid back up of stock ROM 4.2 Att gs4 sgh 1337 let it boot up any settle in 10 min..when I looked at phone I saw the Att redwhite arrows in task bar I quick shut down WiFi and now under settings status it says update continue or something .now my back up is mdb never ota before. so is this update mf3 the one u that is bootlocked or is it the 4.3 update?? I read some were Att was to start with 4.3 update yesterday what u guys think I should do? Thanks in advance ..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Ok I am going to try to go back to stock by using a firmware DL and Odin v3.07 If it works I will tell everyone. If not I may be screwed.
I'm currently on MF3 and had rooted my device previously and would like to upgrade to the new OTA. Would someone be so kind to link me to ODIN and the stock file,so I may return to stock and apply the OTA.
Thank you,
Did anyone go to recovery and factory reset?
Sent from my Nexus 7 using Tapatalk 4
Andrew149 said:
Did anyone go to recovery and factory reset?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I'd recommend it but it's to late for me.
This worked for me to unroot.
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Ditto
silrosriv said:
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
Same exact problem!
wading through threads for answer!
Ok I have my phone working again. I am not on 4.3 but its back to where it was before I started, which is better than nothing. After running Odin once and it failing like it always does (I have never seen it work) I was able to get the holding down volume, home and power button option to work and I just said no and to reboot and it worked. I then went into SuperSU app and unrooted. I will try to update to 4.3 at a later time. I am glad I wasn't the only one having issues. I usually pride myself on knowing technology and being able to figure it out.
silrosriv said:
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems.
So if I oden to stock again don't root Then hit the update it should go? Weird thing is I installed my back up today and it a stock backup fresh rich from a oden wipe and it stared DL on its own before I stopped it with killing WiFi. I s this 4.3 update or is it mf3 since I never did that update. ..help. Thanks
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
tried that..didnt work
padgaland said:
Ok I have my phone working again. I am not on 4.3 but its back to where it was before I started, which is better than nothing. After running Odin once and it failing like it always does (I have never seen it work) I was able to get the holding down volume, home and power button option to work and I just said no and to reboot and it worked. I then went into SuperSU app and unrooted. I will try to update to 4.3 at a later time. I am glad I wasn't the only one having issues. I usually pride myself on knowing technology and being able to figure it out.
Click to expand...
Click to collapse
Tried unrooting through SuperSU and managed to still be rooted after reboot, and OTA 4.3 still didnt work
SIGH
Read that u have to oden to stock dint root and the try ota they say this worked gunna oden back to stock and try..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
thanks
ralphie1267 said:
Read that u have to oden to stock dint root and the try ota they say this worked gunna oden back to stock and try..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
could you point me in the right direction for that procedure? Im trying to do it on my mac using hiemdall but I think im about to go try odin on a PC.
MasterShakeMan said:
Tried unrooting through SuperSU and managed to still be rooted after reboot, and OTA 4.3 still didnt work
SIGH
Click to expand...
Click to collapse
Take it to Best Buy. "Kies broke your phone" *wink*wink* and they can flash it back to stock without messing up your data. You can do it yourself. Plus they have this mysterious awesome SMART tool. Lol
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
MasterShakeMan said:
could you point me in the right direction for that procedure? Im trying to do it on my mac using hiemdall but I think im about to go try odin on a PC.
Click to expand...
Click to collapse
Use the link in my previous post (post #13). That has the files and procedures for using Odin to get back to stock 4.2.2 and then you can do the OTA upgrade from there.
For those who have taken the MJ7 update and realized that you can't regain root. Kingo is working on a solution. Verizon likes to lock their loaders so it takes a little time to break them. I had to take my note to a Best Buy store about an hour from where I live to have them reset my phone from what is being labeled a Softbrick. If anyone knows a way to root the SM-900V with MJ7 please let me know.
Thanks,
GoNavyMike
I took the update a week ago and just rooted with kingo yesterday..all I did was follow instructions withing the app and was rooted minutes later . ... Installed safe strap with beans on slot 2..all is well except I can't get the custom logo to go away from the boot up screen but I don't really care
Sent from my SM-N900V using Tapatalk
I have no idea why people claim kingo doesn't work. It works fine, I and many others have used it on newest update without issue. Also, this isn't development.
Sent from my SM-N900V using xda app-developers app
custom logo
gcforreal said:
I took the update a week ago and just rooted with kingo yesterday..all I did was follow instructions withing the app and was rooted minutes later . ... Installed safe strap with beans on slot 2..all is well except I can't get the custom logo to go away from the boot up screen but I don't really care
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
If you run Triangle Away app, from App Store, it will get rid of custom lock logo on boot up screen
GoNavyMike said:
For those who have taken the MJ7 update and realized that you can't regain root. Kingo is working on a solution. Verizon likes to lock their loaders so it takes a little time to break them. I had to take my note to a Best Buy store about an hour from where I live to have them reset my phone from what is being labeled a Softbrick. If anyone knows a way to root the SM-900V with MJ7 please let me know.
Thanks,
GoNavyMike
Click to expand...
Click to collapse
The Kingo does work for the Verizon Note 3. I literally just did it. At first, it kept saying not supported, but I tried it again with my screen timeout off and I saw that when my phone was connected to Kingo, something popped up warning me something was trying to exploit my phone, click on the box and hit install. Then not long after that your phone will reboot and grant permission stuff will come up. You can either do it this way, or under security uncheck verify apps located under unknown sources.
So on the kingo screen,when selecting the OS mine only goes up to 4.2.2. I am obviously running 4.3 on the note 3. Do I pull the trigger? Or am I missing an update?
Sent from my SM-N900V using Tapatalk
mtnbst said:
So on the kingo screen,when selecting the OS mine only goes up to 4.2.2. I am obviously running 4.3 on the note 3. Do I pull the trigger? Or am I missing an update?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Worked for me and mine said the same thing. "4.2.2" Took me a couple minutes or so and all is good!
I have been hung up on "waiting for device" (after fetching scripts) for about 10 minutes now. Wondering when I should pull the plug. ...
It's a no go... Maybe because it's VZ?
Sent from my SM-N900V using Tapatalk
Kingo works for mj7, if you get hung up on waiting for device, close the kingo app restart computer, open kingo, plug phone into a different usb port.
Sent from my SM-N900V using Xparent Green Tapatalk 2
YES guys, you can root your phone VIA Kingo even if you updated to the newer firmware. My scenario, got my N3 bone stock, rooted it on MJ9 via kingo and worked. Applied OTA update to version to MJ7 and lost root. Used kingo again and gained root. Works totally fine and SS works fine as well.
Still nothing. .I am running win 8 through VM firmware. I wonder if that's my prob. I get all the way to the last step and it hangs. I rooted my Galaxy nexus with this virtual win machine. I might have to borrow a windows laptop
Sent from my SM-N900V using Tapatalk
Kingo
Does anyone have a link to Kingo. I can't get mine to go in Odin, I click to import the file, hit start, and it doesn't do anything. Does the De la Vega file have to be renamed? I'm usually pretty good at getting these things rooted, this seems to be dealing me fits. I NEED ROOT lol
Other issue is that 7zip will not extract the de la Vega file, says it can't open as a archive
Why is this thread so long? Kingo works with MJ7. Nuff said. If the OP would of read the Verizon Note 3 threads for 10-15 minutes he/she would of found this out.
It works for most. I am not most
Sent from my SM-N900V using Tapatalk
mtnbst said:
Still nothing. .I am running win 8 through VM firmware. I wonder if that's my prob. I get all the way to the last step and it hangs. I rooted my Galaxy nexus with this virtual win machine. I might have to borrow a windows laptop
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
VM could definitely be part of your problem, especially if you do not have Internet access through it. USB connections can sometimes be flaky as well.
musicman625 said:
Does anyone have a link to Kingo. I can't get mine to go in Odin, I click to import the file, hit start, and it doesn't do anything. Does the De la Vega file have to be renamed? I'm usually pretty good at getting these things rooted, this seems to be dealing me fits. I NEED ROOT lol
Other issue is that 7zip will not extract the de la Vega file, says it can't open as a archive
Click to expand...
Click to collapse
RDLV does not work on MJ7, unless they have released an update.
http://lmgtfy.com/?q=kingo+root
Sent from my SM-N900V using Tapatalk
I have Internet through it. .. But the USB connection is extremely flakey. I wonder if I try 100 times. .. It's bound to take
Edit: Using the original USB cable for my galaxy nexus gets me 95% through the process vs 50% through the process with the Note 3 cable.
Siiiiiigh,
perhaps my nexus 7 cable will be the ticket...
This will be my first android device that does not have root privileges. $#%@
Sent from my SM-N900V using Tapatalk
The kingo app will do it, make take a few tries and you'll probably have to do it from an actual Windows PC, but it should work. I'd probably try to use a USB 2.0 port rather than a 3.0, if possible.
Sent from my SM-N900V using Tapatalk
Thanks, I won't have access to a PC for a few weeks. I will patiently wait
Sent from my SM-N900V using Tapatalk
Kingo does work. I tried literally 40 times no luck on new ota. Battery pull took out sd card rebooted. First try rooted.
Sent from my SM-N900V using Tapatalk
Ahhh, so there is hope! As soon as I get home I'm trying. Fingers crossed
Nope, tried all that. .. Nothing
Edit: I think Im on at least my 85th attempt...battery pulls, SD pulls computer reboots, different usb cables (note 3 cable is the least effective) Im even alternating USB inputs. anything I'm leaving out?
Sent from my SM-N900V using Tapatalk
I'm interested in the new ROMs that are out but before I start playing I want to have my odin and root steps up to date. I notice that there have been several folks have had kingo fail and have had to use vroot. Is this the standard to use now? Just want to be sure I'm doing this correctly.
I'm on the current baseband and kernel, if that helps.
Thanks in advance.
Oh_wow said:
I'm interested in the new ROMs that are out but before I start playing I want to have my odin and root steps up to date. I notice that there have been several folks have had kingo fail and have had to use vroot. Is this the standard to use now? Just want to be sure I'm doing this correctly.
I'm on the current baseband and kernel, if that helps.
Thanks in advance.
Click to expand...
Click to collapse
I am one of the folks who had to use Vroot. I would try Kingo first and if that does not work then switch to Vroot.
oconnell84 said:
I am one of the folks who had to use Vroot. I would try Kingo first and if that does not work then switch to Vroot.
Click to expand...
Click to collapse
Great! Thanks for the quick reply!
I tried everything under the sun to get kingo to work and it never did. I went to vroot and it worked first try
Sent from my SM-N900V using Tapatalk
I used vroot about a week ago. Super easy, took maybe 30 seconds, and my knox WAS NOT tripped. I couldn't be happier.
Kevins89notch said:
I used vroot about a week ago. Super easy, took maybe 30 seconds, and my knox WAS NOT tripped. I couldn't be happier.
Click to expand...
Click to collapse
Are you using the chinese super user app?
Sent from my SM-N900V using Tapatalk 2
I used Vroot the other day to re root my phone after a reset and replaced the Chinese superuser with Chainfires supersu. You can install it either via Playstore or flash it in safestrap witch I prefer. Also be sure to uninstall whatever other Chinese app gets installed. I have no idea what it is because I can't read it. As a added precaution I also removed my sim card during root. As for Kingo It didn't work for me but there is activity on their twitter account.
recDNA said:
Are you using the chinese super user app?
Sent from my SM-N900V using Tapatalk 2
Click to expand...
Click to collapse
No, right away I installed the proper english version, and then deleted the chinese one.
Just tried Kingo and it's working again.
Misterxtc said:
I used Vroot the other day to re root my phone after a reset and replaced the Chinese superuser with Chainfires supersu. You can install it either via Playstore or flash it in safestrap witch I prefer. Also be sure to uninstall whatever other Chinese app gets installed. I have no idea what it is because I can't read it. As a added precaution I also removed my sim card during root. As for Kingo It didn't work for me but there is activity on their twitter account.
Click to expand...
Click to collapse
Removing the simm card during root sounds like a great idea.
Sent from my SM-N900V using Tapatalk 2
---------- Post added at 09:40 AM ---------- Previous post was at 09:38 AM ----------
Misterxtc said:
I used Vroot the other day to re root my phone after a reset and replaced the Chinese superuser with Chainfires supersu. You can install it either via Playstore or flash it in safestrap witch I prefer. Also be sure to uninstall whatever other Chinese app gets installed. I have no idea what it is because I can't read it. As a added precaution I also removed my sim card during root. As for Kingo It didn't work for me but there is activity on their twitter account.
Click to expand...
Click to collapse
I miss the good old days when there would be a separate thread for each rooting process with suggestions and questions. Now it's search here, search there, search everywhere!
Sent from my SM-N900V using Tapatalk 2
Turmin said:
Thank you.
Click to expand...
Click to collapse
Your welcome. It did take a few tries but it went. Be sure to update supersu when you finish, Kingo is out of date a couple of versions.
I tried 1000000 times last night and it did not work. I used Vroot and it worked great. But remember to do I factory reset to get rid of all the bad crap it loads.
Sent from my SM-N900P using Tapatalk
NissanNick said:
I tried 1000000 times last night and it did not work. I used Vroot and it worked great. But remember to do I factory reset to get rid of all the bad crap it loads.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
They must have just got Kingo working because I used it twice today. The second time worked on the first try. I tried it a second time after a full Oden reset just to make sure. Had some extra time today to play around.
Misterxtc said:
They must have just got Kingo working because I used it twice today. The second time worked on the first try. I tried it a second time after a full Oden reset just to make sure. Had some extra time today to play around.
Click to expand...
Click to collapse
What firmware are you on? MJE?
Sent from my SM-N900V using Tapatalk
Yes, MJE.
Misterxtc said:
Yes, MJE.
Click to expand...
Click to collapse
Worked for me too with MJE. Used USB 3.0 cable in USB 3.0 mode MTP. Prior to that failed in ODIN mode and in MTP mode without USB 3.0. But may be just random luck. Now have Supersu app.
Questions:
1. Should I use that Supersu or change. Looks like same old Supersu, but the version with yellow superman shield and red # sign.
2. Also, it asks if I want to disable Knox. Should I do that? Does that risk tripping know counter?
Sent from my SM-N900V using Tapatalk
yearn2burn said:
Worked for me too with MJE. Used USB 3.0 cable in USB 3.0 mode MTP. Prior to that failed in ODIN mode and in MTP mode without USB 3.0. But may be just random luck. Now have Supersu app.
Questions:
1. Should I use that Supersu or change. Looks like same old Supersu, but the version with yellow superman shield and red # sign.
2. Also, it asks if I want to disable Knox. Should I do that? Does that risk tripping know counter?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Keep supersu but update it to the current v1.93 either by Play Store or flashing in safestrap and yes disable Knox it will not trip the counter. Enjoy.
Yes K works even though it says it fails. I posted my experience back on Feb 3 in another similar thread or look via my profile. In short it will say that it failed but su app shows up and use a root checker to verify. Removal of sd card and pulling and replacing the sim card before root might help. Also watch you phone for a security permission to add an app. I sat an extra five minutes before realizing it.
danthepunman said:
Yes K works even though it says it fails. I posted my experience back on Feb 3 in another similar thread In short it will say that it failed but su app shows up and use a root checker to verify.
Click to expand...
Click to collapse
For me it realized it succeeded.
Sent from my SM-N900V using Tapatalk
Received this update, doesn't look like anything major
Sent from my SM-P900 using XDA Premium HD app
Downloading mine as we speak.
Rolling out in the Netherlands as well. For now no significant changes. Like to see a full changelog..
New:
PDA: P900XXUANC4
CSC: P900OXAANB6
MODEM: P900XXUANC4
Downloading in on a US purchased WiFi model right now.
Sent from my SM-P900 using Tapatalk
"Your device has been modified, software updates are not available."
Tried the Cellular South version on Sammobile. Full wipe and install via Odin 3.09. Seems snappier to me. Reinstalled all my apps. Leaving it unrooted for now.
Sent from my SM-P900 using Tapatalk
Applied update today.
Two things I notice:
1. Viewing large images in stock gallery now much speedier. Before, there was a long delay drawing large images.
2. Suddenly X-plore my preferred file manager has write access on SD card! Before this update it didn't. Haven't really looked fully if other apps have write access that didn't before. Hancom office updated also but it still can only write to a specific location on SD. Maybe X-plore was just a fluke either way? I'm not sure, but happy it works now.
I just notice the update and I just want to know what it will change for better since the device already good enough for me.
Sent from my SM-P900 using Tapatalk
Update in the Netherlands caused much faster WiFi connection. It was extremely slow before while doing a test with the speedtest.net app. The whole device feels speedier and snappier now. For me a big improvement. I hope more will follow, because the speed experience on this very expensive device is a bit disappointing to me.
Lost Root
I took this update and lost root. I tried CF Autoroot and it failed, my tablet would not boot up. I had to flash stock image. I suggest if you don't want to lose root, wait awhile before taking this update. By the way, SU survival didn't work.
Russbad said:
I took this update and lost root. I tried CF Autoroot and it failed, my tablet would not boot up. I had to flash stock image. I suggest if you don't want to lose root, wait awhile before taking this update. By the way, SU survival didn't work.
Click to expand...
Click to collapse
I flashed the update in odin, lost root, flashed cf auto root again and regained root, everything working great and fully rooted on the latest firmware.
Sent from my SPH-L720 using Tapatalk
hendav said:
I flashed the update in odin, lost root, flashed cf auto root again and regained root, everything working great and fully rooted on the latest firmware.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Would you please let me know your build Number? I did so much flashing today I don't even know if I got the latest build now.
Russbad said:
I took this update and lost root. I tried CF Autoroot and it failed, my tablet would not boot up. I had to flash stock image. I suggest if you don't want to lose root, wait awhile before taking this update. By the way, SU survival didn't work.
Click to expand...
Click to collapse
you won't lose root. You just have to reinstall SuperSU and everything will be fine. I lost root after updating to the new firmware, however after rebooting I reinstalled the SuperSU and I Have root again.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
I am now rooted on build P900UEU1ANC5 from Cellular South firmware I got from Sammobile. No noticible changes and no problems so far.
Russbad said:
I am now rooted on build P900UEU1ANC5 from Cellular South firmware I got from Sammobile. No noticible changes and no problems so far.
Click to expand...
Click to collapse
Yup, Thats the latest firmware update that was most recently rolled out for the P900 series. ( P900UEU1ANC5 )
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Russbad said:
I took this update and lost root. I tried CF Autoroot and it failed, my tablet would not boot up. I had to flash stock image. I suggest if you don't want to lose root, wait awhile before taking this update. By the way, SU survival didn't work.
Click to expand...
Click to collapse
same happened to me. reinstalling supersu didn't work. I tried rerooting with cfautoroot and it hangs on cach.img then my screen goes striped red and freezes. couldn't even boot, had to re flash recovery to boot.
shouldn't have updated.
madjinx said:
same happened to me. reinstalling supersu didn't work. I tried rerooting with cfautoroot and it hangs on cach.img then my screen goes striped red and freezes. couldn't even boot, had to re flash recovery to boot.
shouldn't have updated.
Click to expand...
Click to collapse
1. Reflash root with Odin.
2. Reboot.
3. Reinstall SuperSU.
4. Enjoy root privilages.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Android.Ninja said:
1. Reflash root with Odin.
2. Reboot.
3. Reinstall SuperSU.
4. Enjoy root privilages.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Click to expand...
Click to collapse
there a root to flash other than cfautoroot? that's the only one I've seen.
madjinx said:
there a root to flash other than cfautoroot? that's the only one I've seen.
Click to expand...
Click to collapse
cfautoroot is the only one that I'm aware of to flash, that's working anyways. I've seen other work in another forum however it hasn't been fully successful.
Android.Ninja said:
cfautoroot is the only one that I'm aware of to flash, that's working anyways. I've seen other work in another forum however it hasn't been fully successful.
Click to expand...
Click to collapse
as I said in my other post, cfautoroot isnt working for me.